How to run KVM on non-X environment
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Alberto,
Thanks for your detail advice.
Quoted 54 lines · --- Alberto Treviño
Quoted 4 lines · you
I ran above command direct on the server as root (not remotely on desktop)
It just hangs there on Xterm.
As it should. :-) At that point, the VM is running. It is a process on the
system. When the VM is powered off, the process will end and your XTerm
will return to a bash prompt. If you want your KVM to run in the background, run with the -daemonize option:kvm -hda ubuntu6.06.img -cdrom
/dev/scd0-m 512 -boot d -vnc :0
-daemonizeQuoted 4 lines
I expect clarifying following points;
1) I don't run X on the server. There are no X packages installed.
2) The CD on the CD-Drive is Ubuntu6.06 installer, NOT its isoimage
Check.
Quoted 1 line
Can I use the above command? TIA
Yep. However, I think at you this point you are not sure what's going on or
how to proceed.When you run the above command on the server, KVM is going to start the
Virtual Machine. It will assign the first hard drive to the ubuntu6.06.img
file (which should have already been created using qemu-img), attach the CD
drive to the Virtual Machine, assign it 512 MB of memory, and attach the
virtual video output (what the monitor on a normal computer would display),
keyboard and mouse to a VNC server. At that point, the VM will perform a
BIOS POST and attempt to boot from the CD drive.At this stage, you need to connect to the virtual keyboard, mouse and
monitor via VNC from your desktop (not the server). To do that, you use a
VNC viewer to connect to your server (that means your server firewall needs
to accept connections to port 5900). Once you connect, your VNC session
will display the video output of the VM.
Quoted 9 lines
As a side note, I would recommend you don't use the -daemonize option until
you are ready to leave the VM running. If your need to "reset" the virtual
machine, you can use Ctrl-C to kill it and rerun the last command to restart
it. Be aware that using Ctrl-C is the equivalent of pulling the power cord
on a regular machine, so use with care.
My problem here I don't have vnc-viewer running on the local desktop. Nor I know which package I need.
Can I install vnc-client on the server. Let the local desktop to start it remotely and forward it to the desktop as vncviewer. The desktop can ssh-connect the server w/o problem. If YES please advise how to do it. TIA
B.R.
Stephen
Send instant messages to your online friends http://uk.messenger.yahoo.com