power supply: add driver for TI BQ20Z75 gas gauge IC
PATCH v3 1/1 power supply: add driver for TI BQ20Z75 gas gauge IC
From: Rhyland Klein <[email protected]>
this driver depends on I2C and uses SMBUS for communication with the host.
Addressed comments from reviews by Mark Brown and Jean Delvare.
* Cleaned up whitespace and alignment issues
* changed return codes to more appropriate values
* change Kconfig option name to be consistent with existing devices
* removed global struct and moved to device specific data
* changed printk to dev_dbg
* added reviewed-by tags for Mark and Jean.
--- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/bq20z75.c | 385 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+), 0 deletions(-) create mode 100644 drivers/power/bq20z75.c
drivers/power/Kconfig +7 -0
@@ -109,6 +109,13 @@ config BATTERY_WM97XX help Say Y to enable support for battery measured by WM97xx aux port. +config BATTERY_BQ20Z75 + tristate "TI BQ20z75 gas gauge" + depends on I2C + help + Say Y to include support for TI BQ20z75 SBS-compliant + gas gauge and protection IC. + config BATTERY_BQ27x00 tristate "BQ27x00 battery driver" depends on I2C
drivers/power/Makefile +1 -0
@@ -29,6 +29,7 @@ obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o +obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
drivers/power/bq20z75.c new file +385 -0
385 lines not on this page · raw message
Signature · 1 line
1.7.0.4
Anton Vorontsov
AppliedQuoted 12 lines · On Sun, Sep 05, 2010 at 03:31:23PM -0700…
From: Rhyland Klein <[email protected]>
this driver depends on I2C and uses SMBUS for communication with the host.
Addressed comments from reviews by Mark Brown and Jean Delvare.
* Cleaned up whitespace and alignment issues
* changed return codes to more appropriate values
* changeKconfigoption name to be consistent with existing devices
* removed global struct and moved to device specific data
* changed printk todev_dbg
* added reviewed-by tags for Mark and Jean.
Quoted 3 lines
Reviewed-by Jean Delvare <[email protected]>Signed-off-by Rhyland Klein <[email protected]>
Applied, thanks everyone!