Skip to contentSkip to conversation

ASoC: Fix cut'n'paste comment in WM8994

PATCH In review Mark Brown 2 participants 2 messages Sep 6, 2010

Subsystems (3)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 ASoC: Fix cut'n'paste comment in WM8994

---
 sound/soc/codecs/wm8994.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
sound/soc/codecs/wm8994.c +1 -1
index a3d9145..218bcd2 100644
@@ -3810,7 +3810,7 @@ static void wm8994_handle_pdata(struct wm8994_priv *wm8994)
  *
  * Enable microphone detection via IRQ on the WM8994.  If GPIOs are
  * being used to bring out signals to the processor then only platform
- * data configuration is needed for WM8903 and processor GPIOs should
+ * data configuration is needed for WM8994 and processor GPIOs should
  * be configured using snd_soc_jack_add_gpios() instead.
  *
  * Configuration of detection levels is available via the micbias1_lvl
Signature · 1 line
1.7.1
Acked-by on v1 1/1
#1 lore raw
Quoted 10 lines · Mark Brown
---
 sound/soc/codecs/wm8994.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
sound/soc/codecs/wm8994.c +0 -0
index a3d9145..218bcd2 100644

sound/soc/codecs/wm8994.c static void wm8994_handle_pdata(struct wm8994_priv *wm8994) · line 3816

Quoted 8 lines
sound/soc/codecs/wm8994.c +1 -1
@@ -3810,7 +3810,7 @@ static void wm8994_handle_pdata(struct wm8994_priv *wm8994)
  *
  * Enable microphone detection via IRQ on the WM8994.  If GPIOs are
  * being used to bring out signals to the processor then only platform
- * data configuration is needed for WM8903 and processor GPIOs should
+ * data configuration is needed for WM8994 and processor GPIOs should
  * be configured using snd_soc_jack_add_gpios() instead.
  *
  * Configuration of detection levels is available via the micbias1_lvl
Signature · 3 lines
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk