Update kernel for rx1950 machine
cover Update kernel for rx1950 machine
This patch series adds rx1950-specific patches to linux-2.6.35 and makes it default for this machine.
PATCH 1/2 linux-2.6.35: add rx1950 support
Signed-off-by Vasily Khoruzhick <[email protected]>
--- .../0001-s3c2410_ts-add-fake-pressure-events.patch | 41 + ...2-s3c2410_udc-2440-dual-packet-workaround.patch | 71 + .../rx1950/0003-rx1950-add-battery-device.patch | 356 +++++ .../rx1950/0004-rx1950-add-LEDs-support.patch | 71 + ...-s3c24xx-DMA-don-t-use-autoreload-feature.patch | 701 +++++++++ .../rx1950/0006-s3cmci-minor-fixups.patch | 40 + .../rx1950/0007-Add-s3c-adc-battery-driver.patch | 530 +++++++ recipes/linux/linux-2.6.35/rx1950/defconfig | 1615 ++++++++++++++++++++ recipes/linux/linux_2.6.35.bb | 7 + 9 files changed, 3432 insertions(+), 0 deletions(-) create mode 100644 recipes/linux/linux-2.6.35/rx1950/0001-s3c2410_ts-add-fake-pressure-events.patch create mode 100644 recipes/linux/linux-2.6.35/rx1950/0002-s3c2410_udc-2440-dual-packet-workaround.patch create mode 100644 recipes/linux/linux-2.6.35/rx1950/0003-rx1950-add-battery-device.patch create mode 100644 recipes/linux/linux-2.6.35/rx1950/0004-rx1950-add-LEDs-support.patch create mode 100644 recipes/linux/linux-2.6.35/rx1950/0005-s3c24xx-DMA-don-t-use-autoreload-feature.patch create mode 100644 recipes/linux/linux-2.6.35/rx1950/0006-s3cmci-minor-fixups.patch create mode 100644 recipes/linux/linux-2.6.35/rx1950/0007-Add-s3c-adc-battery-driver.patch create mode 100644 recipes/linux/linux-2.6.35/rx1950/defconfig
recipes/linux/linux-2.6.35/rx1950/0001-s3c2410_ts-add-fake-pressure-events.patch new file +41 -0
@@ -0,0 +1,41 @@ +From d9b482fc3e5bef43a7845989189cf9b71915a1cb Mon Sep 17 00:00:00 2001 +From: Vasily Khoruzhick <[email protected]> +Date: Wed, 12 May 2010 09:59:32 +0300 +Subject: [PATCH 01/20] s3c2410_ts: add fake pressure events + +Signed-off-by: Vasily Khoruzhick <[email protected]> +--- + drivers/input/touchscreen/s3c2410_ts.c | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c +index 6085d12..381c295 100644 +--- a/drivers/input/touchscreen/s3c2410_ts.c ++++ b/drivers/input/touchscreen/s3c2410_ts.c +@@ -126,6 +126,7 @@ static void touch_timer_fire(unsigned long data) + input_report_abs(ts.input, ABS_Y, ts.yp); + + input_report_key(ts.input, BTN_TOUCH, 1); ++ input_report_abs(ts.input, ABS_PRESSURE, 1); + input_sync(ts.input); + + ts.xp = 0; +@@ -140,6 +141,7 @@ static void touch_timer_fire(unsigned long data) + ts.count = 0; + + input_report_key(ts.input, BTN_TOUCH, 0); ++ input_report_abs(ts.input, ABS_PRESSURE, 0); + input_sync(ts.input); + + writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC); +@@ -318,6 +320,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) + ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0); + input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0); ++ input_set_abs_params(ts.input, ABS_PRESSURE, 0, 1, 0, 0); + + ts.input->name = "S3C24XX TouchScreen"; + ts.input->id.bustype = BUS_HOST; +-- +1.7.2.2 +
recipes/linux/linux-2.6.35/rx1950/0002-s3c2410_udc-2440-dual-packet-workaround.patch new file +71 -0
71 lines not on this page · raw message
recipes/linux/linux-2.6.35/rx1950/0003-rx1950-add-battery-device.patch new file +356 -0
356 lines not on this page · raw message
recipes/linux/linux-2.6.35/rx1950/0004-rx1950-add-LEDs-support.patch new file +71 -0
71 lines not on this page · raw message
recipes/linux/linux-2.6.35/rx1950/0005-s3c24xx-DMA-don-t-use-autoreload-feature.patch new file +701 -0
701 lines not on this page · raw message
recipes/linux/linux-2.6.35/rx1950/0006-s3cmci-minor-fixups.patch new file +40 -0
@@ -0,0 +1,40 @@ +From 6c2fec9c2f1888fc177c29a37a3032f8144d2003 Mon Sep 17 00:00:00 2001 +From: Vasily Khoruzhick <[email protected]> +Date: Fri, 13 Aug 2010 20:01:53 +0300 +Subject: [PATCH 06/20] s3cmci: minor fixups + +- It's not necessary to start DMA op manually, as we have +autostart feature enabled +- Restore prescaler before DMA operation, otherwise it +takes ages to complete DMA op. + +Signed-off-by: Vasily Khoruzhick <[email protected]> +--- + drivers/mmc/host/s3cmci.c | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c +index 2e16e0a..5d1a8ed 100644 +--- a/drivers/mmc/host/s3cmci.c ++++ b/drivers/mmc/host/s3cmci.c +@@ -1106,6 +1106,8 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + ++ /* Restore prescaler value */ ++ writel(host->prescaler, host->base + S3C2410_SDIPRE); + res = s3c2410_dma_enqueue(host->dma, host, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); +@@ -1116,8 +1118,6 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) + } + } + +- s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); +- + return 0; + } + +-- +1.7.2.2 +
recipes/linux/linux-2.6.35/rx1950/0007-Add-s3c-adc-battery-driver.patch new file +530 -0
530 lines not on this page · raw message
recipes/linux/linux-2.6.35/rx1950/defconfig new file +1615 -0
1,190 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.7.2.2
Part of the diff is not shown here. View the raw message.
PATCH 2/2 rx1950: change default kernel to linux-2.6.35
In reply to Vasily KhoruzhickSigned-off-by Vasily Khoruzhick <[email protected]>
--- conf/machine/rx1950.conf | 12 ++---------- 1 files changed, 2 insertions(+), 10 deletions(-)
conf/machine/rx1950.conf +2 -10
@@ -20,17 +20,9 @@ MACHINE_FEATURES = "kernel26 touchscreen apm alsa irda wifi usbgadget screen vfa # # Software/packages selection # -PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6" +PREFERRED_PROVIDER_virtual/kernel = "linux" +PREFERRED_VERSION_linux = "2.6.35" PCMCIA_MANAGER = "pcmciautils" -PREFERRED_PROVIDER_xserver = "xserver-kdrive" - -# -# Modules autoload and other boot properties -# -module_autoload_snd-pcm-oss = "snd-pcm-oss" -module_autoload_g_ether = "g_ether" SERIAL_CONSOLE = "115200 ttyS0 vt100" USE_VT = "0" - -require conf/machine/include/LAB-settings.inc
Signature · 1 line
1.7.2.2