h1940: add UDA1380 to i2c devices list
Subsystems (3)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 5/5 h1940: add UDA1380 to i2c devices list
v2: add uda1380 reset pin
Signed-off-by Vasily Khoruzhick <[email protected]>
--- arch/arm/mach-s3c2410/mach-h1940.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-)
arch/arm/mach-s3c2410/mach-h1940.c +20 -0
@@ -24,6 +24,7 @@#include <linux/io.h> #include <linux/gpio.h> #include <linux/pwm_backlight.h> +#include <linux/i2c.h> #include <video/platform_lcd.h> #include <linux/mmc/host.h>
@@ -59,6 +60,8 @@#include <plat/mci.h> #include <plat/ts.h> +#include <sound/uda1380.h> +#define H1940_LATCH ((void __force __iomem *)0xF8000000)#define H1940_PA_LATCH S3C2410_CS2
@@ -365,12 +368,26 @@ static struct platform_device h1940_lcd_powerdev = { .dev.platform_data = &h1940_lcd_power_data, }; +static struct uda1380_platform_data uda1380_info = { + .gpio_power =H1940_LATCH_UDA_POWER , + .gpio_reset =S3C2410_GPA (12 ), + .dac_clk =UDA1380_DAC_CLK_SYSCLK , +}; + +static struct i2c_board_info h1940_i2c_devices[] = { + { +I2C_BOARD_INFO ("uda1380" ,0x1a ), + .platform_data = &uda1380_info, + }, +}; +static struct platform_device *h1940_devices[]__initdata = { &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, + &s3c_device_pcm, &s3c_device_usbgadget, &h1940_device_leds, &h1940_device_bluetooth,
@@ -465,6 +482,9 @@ static void __init h1940_init(void)gpio_direction_output (H1940_LATCH_SD_POWER ,0 );platform_add_devices (h1940_devices,ARRAY_SIZE (h1940_devices)); + +i2c_register_board_info (0 , h1940_i2c_devices, +ARRAY_SIZE (h1940_i2c_devices)); }MACHINE_START (H1940 ,"IPAQ-H1940" )
Signature · 1 line
1.7.2.2
PATCH v3 5/5 h1940: add UDA1380 to i2c devices list
Register UDA1380 codec during H1940 machine init
Signed-off-by Vasily Khoruzhick <[email protected]>
---
v2: Add UDA1380 reset pin
v3: Add verbose comment to patch
arch/arm/mach-s3c2410/mach-h1940.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-)
arch/arm/mach-s3c2410/mach-h1940.c +20 -0
@@ -24,6 +24,7 @@#include <linux/io.h> #include <linux/gpio.h> #include <linux/pwm_backlight.h> +#include <linux/i2c.h> #include <video/platform_lcd.h> #include <linux/mmc/host.h>
@@ -59,6 +60,8 @@#include <plat/mci.h> #include <plat/ts.h> +#include <sound/uda1380.h> +#define H1940_LATCH ((void __force __iomem *)0xF8000000)#define H1940_PA_LATCH S3C2410_CS2
@@ -365,12 +368,26 @@ static struct platform_device h1940_lcd_powerdev = { .dev.platform_data = &h1940_lcd_power_data, }; +static struct uda1380_platform_data uda1380_info = { + .gpio_power =H1940_LATCH_UDA_POWER , + .gpio_reset =S3C2410_GPA (12 ), + .dac_clk =UDA1380_DAC_CLK_SYSCLK , +}; + +static struct i2c_board_info h1940_i2c_devices[] = { + { +I2C_BOARD_INFO ("uda1380" ,0x1a ), + .platform_data = &uda1380_info, + }, +}; +static struct platform_device *h1940_devices[]__initdata = { &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, + &s3c_device_pcm, &s3c_device_usbgadget, &h1940_device_leds, &h1940_device_bluetooth,
@@ -465,6 +482,9 @@ static void __init h1940_init(void)gpio_direction_output (H1940_LATCH_SD_POWER ,0 );platform_add_devices (h1940_devices,ARRAY_SIZE (h1940_devices)); + +i2c_register_board_info (0 , h1940_i2c_devices, +ARRAY_SIZE (h1940_i2c_devices)); }MACHINE_START (H1940 ,"IPAQ-H1940" )
Signature · 1 line
1.7.3
PATCH v3 5/5 h1940: add UDA1380 to i2c devices list
Quoted 3 lines · On 27 of September 2010 09:32:49 Vasily Khoruzhick wrote:
Register UDA1380 codec during H1940 machine init
Signed-off-by Vasily Khoruzhick <[email protected]>
Ping
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20101001/a18f774d/attachment.sig>