ARM: pxa168: Added Teton BGA Board Support
Subsystems (3)
v2 cover ARM: pxa168: Added Teton BGA Board Support
1) Support for Teton BGA Board
2) Keypad support for Teton BG
3) RTC support
Version 2:
1) Added information to MAINTAINERS
2) Added Authorship information
3) Added teton_bga.h in the board support patch
4) Added ALARM interrupt support for RTC
Patched on top of Eric Miao's tree commit 5df3afbca20235ff8b3d33bd0d26a0d47b989a30
Mark F. Brown (3):
ARM: pxa168: added support for Teton BGA platform
ARM: pxa168/teton bga: added keypad support
ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337
MAINTAINERS | 5 ++ arch/arm/mach-mmp/Kconfig | 7 ++ arch/arm/mach-mmp/Makefile | 1 + arch/arm/mach-mmp/include/mach/teton_bga.h | 27 ++++++++ arch/arm/mach-mmp/teton_bga.c | 90 ++++++++++++++++++++++++++++ 5 files changed, 130 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mmp/include/mach/teton_bga.h create mode 100644 arch/arm/mach-mmp/teton_bga.c
PATCH v2 1/3 ARM: pxa168: added support for Teton BGA platform
Added board defintion, header, and debug UART support.
--- MAINTAINERS | 5 +++ arch/arm/mach-mmp/Kconfig | 7 ++++ arch/arm/mach-mmp/Makefile | 1 + arch/arm/mach-mmp/include/mach/teton_bga.h | 27 +++++++++++++++ arch/arm/mach-mmp/teton_bga.c | 50 ++++++++++++++++++++++++++++ 5 files changed, 90 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mmp/include/mach/teton_bga.h create mode 100644 arch/arm/mach-mmp/teton_bga.c
MAINTAINERS +5 -0
@@ -967,6 +967,11 @@ M: Lennert Buytenhek <[email protected]> L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/TETON BGA MACHINE SUPPORT +M: Mark F. Brown <[email protected]> +L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) +S: Maintained + ARM/THECUS N2100 MACHINE SUPPORT M: Lennert Buytenhek <[email protected]> L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
arch/arm/mach-mmp/Kconfig +7 -0
@@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER PXA910-based development board. Since MMP2 is compatible to ARMv6 architecture. +config MACH_TETON_BGA + bool "Marvell's PXA168 Teton BGA Development Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + Teton BGA Development Board. + endmenu config CPU_PXA168
arch/arm/mach-mmp/Makefile +1 -0
@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o +obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
arch/arm/mach-mmp/include/mach/teton_bga.h new file +27 -0
@@ -0,0 +1,27 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/teton_bga.h +* +* Support for the Marvell PXA168 Teton BGA Development Platform. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* publishhed by the Free Software Foundation. +*/ +#ifndef __ASM_MACH_TETON_BGA_H +#define __ASM_MACH_TETON_BGA_H + +/* GPIOs */ +#define MMC_PWENA_GPIO 27 +#define USBHPENB_GPIO 55 +#define RTC_INT_GPIO 78 +#define LCD_VBLK_EN_GPIO 79 +#define LCD_DVDD_EN_GPIO 80 +#define RST_WIFI_GPIO 81 +#define CF_PWEN_GPIO 82 +#define USB_OC_GPIO 83 +#define PWM_GPIO 84 +#define USBHPENA_GPIO 85 +#define TS_INT_GPIO 86 +#define CIR_GPIO 108 + +#endif /* __ASM_MACH_TETON_BGA_H */
arch/arm/mach-mmp/teton_bga.c new file +50 -0
50 lines not on this page · raw message
Signature · 1 line
1.7.0.4
Re: [PATCH v2 1/3] ARM: pxa168: added support for Teton BGA platform
Quoted 131 lines · Mark F. Brown
Added board defintion, header, and debug UART support.
Signed-off-by Mark F. Brown <[email protected]>---
?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?5 +++ ?arch/arm/mach-mmp/Kconfig ? ? ? ? ? ? ? ? ?| ? ?7 ++++ ?arch/arm/mach-mmp/Makefile ? ? ? ? ? ? ? ? | ? ?1 + ?arch/arm/mach-mmp/include/mach/teton_bga.h | ? 27 +++++++++++++++ ?arch/arm/mach-mmp/teton_bga.c ? ? ? ? ? ? ?| ? 50 ++++++++++++++++++++++++++++?5 files changed, 90 insertions(+), 0 deletions(-) ?create mode 100644
arch/arm/mach-mmp/include/mach/teton_bga.h?create mode 100644arch/arm/mach-mmp/teton_bga.cMAINTAINERS +0
-0@@ -967,6 +967,11 @@ M: Lennert Buytenhek <[email protected]> ?L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)?S: ? ? Maintained
MAINTAINERS +5
-0+ARM/TETON BGA MACHINE SUPPORT +M: ? ? Mark F. Brown <[email protected]> +L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) +S: ? ? Maintained +?ARM/THECUS N2100 MACHINE SUPPORT
?M: ? ? Lennert Buytenhek <[email protected]>
?L: ? ? linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)arch/arm/mach-mmp/Kconfig +0
-0@@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER? ? ? ? ?PXA910-based development board. Since MMP2 is compatible to ? ? ? ? ?ARMv6 architecture.
arch/arm/mach-mmp/Kconfig +7
-0+config MACH_TETON_BGA + ? ? ? bool "Marvell's PXA168 Teton BGA Development Board" + ? ? ? select CPU_PXA168 + ? ? ? help + ? ? ? ? Say 'Y' here if you want to support the Marvell PXA168-based + ? ? ? ? Teton BGA Development Board. +?endmenu
?config
CPU_PXA168arch/arm/mach-mmp/Makefile +0
-0@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB) ? += tavorevb.o?obj-$(CONFIG_MACH_TTC_DKB) ? ? += ttc_dkb.o
?obj-$(CONFIG_MACH_FLINT) ? ? ? += flint.o
?obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.oarch/arm/mach-mmp/Makefile +1
-0+obj-$(CONFIG_MACH_TETON_BGA) ? += teton_bga.oarch/arm/mach-mmp/include/mach/teton_bga.h new file +27
-0@@ -0,0 +1,27 @@ +/* +* ?linux/arch/arm/mach-mmp/include/mach/teton_bga.h +* +* ?Support for the Marvell PXA168 Teton BGA Development Platform. +* +* ?This program is free software; you can redistribute it and/or modify +* ?it under the terms of the GNU General Public License version 2 as +* ?publishhed by the Free Software Foundation. +*/ +#ifndef __ASM_MACH_TETON_BGA_H +#define __ASM_MACH_TETON_BGA_H + +/* GPIOs */ +#define MMC_PWENA_GPIO ? ? ? ? 27 +#define USBHPENB_GPIO ? ? ? ? ?55 +#define RTC_INT_GPIO ? ? ? ? ? 78 +#define LCD_VBLK_EN_GPIO ? ? ? 79 +#define LCD_DVDD_EN_GPIO ? ? ? 80 +#define RST_WIFI_GPIO ? ? ? ? ?81 +#define CF_PWEN_GPIO ? ? ? ? ? 82 +#define USB_OC_GPIO ? ? ? ? ? ?83 +#define PWM_GPIO ? ? ? ? ? ? ? 84 +#define USBHPENA_GPIO ? ? ? ? ?85 +#define TS_INT_GPIO ? ? ? ? ? ?86 +#define CIR_GPIO ? ? ? ? ? ? ? 108 + +#endif /* __ASM_MACH_TETON_BGA_H */ arch/arm/mach-mmp/teton_bga.c new file +36
-0@@ -0,0 +1,50 @@ +/* +* ?linux/arch/arm/mach-mmp/teton_bga.c +* +* ?Support for the Marvell PXA168 Teton BGA Development Platform. +* +* ?Author: Mark F. Brown <[email protected]> +* +* ?This code is based on aspenite.c +* +* ?This program is free software; you can redistribute it and/or modify +* ?it under the terms of the GNU General Public License version 2 as +* ?publishhed by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> +#include <mach/mfp-pxa168.h> +#include <mach/pxa168.h> +#include <mach/teton_bga.h> + +#include "common.h" + +static unsigned long teton_bga_pin_config[]__initdata = { + ? ? ? /* UART1 */ + ? ? ? GPIO107_UART1_TXD, + ? ? ? GPIO108_UART1_RXD, +}; + +static void __init teton_bga_init (void ) +{
arch/arm/mach-mmp/teton_bga.c line 46
Quoted 10 lines
arch/arm/mach-mmp/teton_bga.c new file +10
-0+ ? ? ? mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config)); + + ? ? ? /* on-chip devices */ + ? ? ? pxa168_add_uart(1); +} + +MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") + ? ? ? .phys_io ? ? ? ?= APB_PHYS_BASE, + ? ? ? .io_pg_offst ? ?= (APB_VIRT_BASE >> 18) & 0xfffc, + ? ? ? .map_io ? ? ? ? = mmp_map_io,
Added .nr_irqs = IRQ_BOARD_START here, since I've merged Haojian's patch for enabling SPARSE_IRQ on MMP.
Otherwise all good to me, applied to 'devel'.
Quoted 8 lines
arch/arm/mach-mmp/teton_bga.c new file +4
-1+ ? ? ? .init_irq ? ? ? = pxa168_init_irq, + ? ? ? .timer ? ? ? ? ?= &pxa168_timer, + ? ? ? .init_machine ? = teton_bga_init, +MACHINE_END --1.7.0.4
PATCH v2 2/3 ARM: pxa168/teton bga: added keypad support
In reply to Mark F. BrownSupport for Matrix keypad ESC, ENTER, LEFT, and RIGHT
--- arch/arm/mach-mmp/teton_bga.c | 24 ++++++++++++++++++++++++ 1 files changed, 24 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/teton_bga.c +24 -0
@@ -16,6 +16,8 @@#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/input.h> +#include <plat/pxa27x_keypad.h> #include <asm/mach-types.h> #include <asm/mach/arch.h>
@@ -30,6 +32,27 @@ static unsigned long teton_bga_pin_config[] __initdata = {/* UART1 */ GPIO107_UART1_TXD ,GPIO108_UART1_RXD , + +/* Keypad */ +GPIO109_KP_MKIN1 , +GPIO110_KP_MKIN0 , +GPIO111_KP_MKOUT7 , + GPIO112_KP_MKOUT6, +}; + +static unsigned int teton_bga_matrix_key_map[] = { +KEY (0 ,6 ,KEY_ESC ), +KEY (0 ,7 ,KEY_ENTER ), +KEY (1 ,6 ,KEY_LEFT ), +KEY (1 ,7 ,KEY_RIGHT ), +}; + +static struct pxa27x_keypad_platform_data teton_bga_keypad_info__initdata = { + .matrix_key_rows =2 , + .matrix_key_cols =8 , + .matrix_key_map = teton_bga_matrix_key_map, + .matrix_key_map_size =ARRAY_SIZE (teton_bga_matrix_key_map), + .debounce_interval =30 , };static void __init teton_bga_init (void )
@@ -38,6 +61,7 @@ static void __init teton_bga_init(void)/* on-chip devices */ pxa168_add_uart (1 ); +pxa168_add_keypad (&teton_bga_keypad_info); }MACHINE_START (TETON_BGA ,"PXA168-based Teton BGA Development Platform" )
Signature · 1 line
1.7.0.4
Eric Miao
AppliedRe: [PATCH v2 2/3] ARM: pxa168/teton bga: added keypad support
Quoted 3 lines · Mark F. Brown
Support for Matrix keypad ESC, ENTER, LEFT, and RIGHT
Signed-off-by Mark F. Brown <[email protected]>
Applied.
Quoted 57 lines
---
?arch/arm/mach-mmp/teton_bga.c | ? 24 ++++++++++++++++++++++++ ?1 files changed, 24 insertions(+), 0 deletions(-)arch/arm/mach-mmp/teton_bga.c +0
-0@@ -16,6 +16,8 @@?#include <
linux/kernel.h>
?#include <linux/platform_device.h>
?#include <linux/gpio.h>arch/arm/mach-mmp/teton_bga.c +2
-0+#include <linux/input.h> +#include <plat/pxa27x_keypad.h> ?#include <
asm/mach-types.h>
?#include <asm/mach/arch.h>arch/arm/mach-mmp/teton_bga.c +0
-0@@ -30,6 +32,27 @@ static unsigned long teton_bga_pin_config[] __initdata = {? ? ? ?/* UART1 */
? ? ? ?GPIO107_UART1_TXD,
? ? ? ?GPIO108_UART1_RXD,arch/arm/mach-mmp/teton_bga.c +21
-0+ + ? ? ? /* Keypad */ + ? ? ? GPIO109_KP_MKIN1, + ? ? ? GPIO110_KP_MKIN0, + ? ? ? GPIO111_KP_MKOUT7, + ? ? ? GPIO112_KP_MKOUT6, +}; + +static unsigned int teton_bga_matrix_key_map[] = { + ? ? ? KEY(0, 6, KEY_ESC), + ? ? ? KEY(0, 7, KEY_ENTER), + ? ? ? KEY(1, 6, KEY_LEFT), + ? ? ? KEY(1, 7, KEY_RIGHT), +}; + +static struct pxa27x_keypad_platform_data teton_bga_keypad_info__initdata = { + ? ? ? .matrix_key_rows ? ? ? ?= 2, + ? ? ? .matrix_key_cols ? ? ? ?= 8, + ? ? ? .matrix_key_map ? ? ? ? = teton_bga_matrix_key_map, + ? ? ? .matrix_key_map_size ? ?= ARRAY_SIZE(teton_bga_matrix_key_map), + ? ? ? .debounce_interval ? ? ?= 30,?};
?static void
__initteton_bga_init(void)arch/arm/mach-mmp/teton_bga.c +0
-0@@ -38,6 +61,7 @@ static void __init teton_bga_init(void)? ? ? ?/* on-chip devices */
? ? ? ?pxa168_add_uart(1);
+ ? ? ?pxa168_add_keypad(&teton_bga_keypad_info); ?}?MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") --
1.7.0.4
PATCH v2 3/3 ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337
In reply to Mark F. BrownDefined I2C/ALARM pin definitions
DS1337 RTC alarm support is tied to RTC_INT_GPIO
--- arch/arm/mach-mmp/teton_bga.c | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/teton_bga.c +16 -0
@@ -18,6 +18,7 @@#include <linux/gpio.h> #include <linux/input.h> #include <plat/pxa27x_keypad.h> +#include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h>
@@ -38,6 +39,13 @@ static unsigned long teton_bga_pin_config[] __initdata = {GPIO110_KP_MKIN0 ,GPIO111_KP_MKOUT7 ,GPIO112_KP_MKOUT6 , + +/* I2C Bus */ +GPIO105_CI2C_SDA , +GPIO106_CI2C_SCL , + +/* RTC */ + GPIO78_GPIO, }; static unsigned int teton_bga_matrix_key_map[] = {
@@ -55,6 +63,13 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { .debounce_interval = 30, }; +static struct i2c_board_info teton_bga_i2c_info[]__initdata = { + { +I2C_BOARD_INFO ("ds1337" ,0x68 ), + .irq =gpio_to_irq (RTC_INT_GPIO ) + }, +}; +static void __init teton_bga_init (void ) {mfp_config (ARRAY_AND_SIZE (teton_bga_pin_config));
@@ -62,6 +77,7 @@ static void __init teton_bga_init(void)/* on-chip devices */ pxa168_add_uart (1 );pxa168_add_keypad (&teton_bga_keypad_info); +pxa168_add_twsi (0 ,NULL ,ARRAY_AND_SIZE (teton_bga_i2c_info)); }MACHINE_START (TETON_BGA ,"PXA168-based Teton BGA Development Platform" )
Signature · 1 line
1.7.0.4
Re: [PATCH v2 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337
Quoted 59 lines · Mark F. Brown
Defined I2C/ALARM pin definitions
DS1337 RTC alarm support is tied toRTC_INT_GPIOSigned-off-by Mark F. Brown <[email protected]>---
?arch/arm/mach-mmp/teton_bga.c | ? 16 ++++++++++++++++ ?1 files changed, 16 insertions(+), 0 deletions(-)arch/arm/mach-mmp/teton_bga.c +0
-0@@ -18,6 +18,7 @@?#include <
linux/gpio.h>
?#include <linux/input.h>
?#include <plat/pxa27x_keypad.h>
+#include <linux/i2c.h>?#include <
asm/mach-types.h>
?#include <asm/mach/arch.h>arch/arm/mach-mmp/teton_bga.c +14
-0@@ -38,6 +39,13 @@ static unsigned long teton_bga_pin_config[] __initdata = { ? ? ? ?GPIO110_KP_MKIN0, ? ? ? ?GPIO111_KP_MKOUT7, ? ? ? ?GPIO112_KP_MKOUT6, + + ? ? ? /* I2C Bus */ + ? ? ? GPIO105_CI2C_SDA, + ? ? ? GPIO106_CI2C_SCL, + + ? ? ? /* RTC */ + ? ? ? GPIO78_GPIO, ?}; ?static unsigned int teton_bga_matrix_key_map[] = {@@ -55,6 +63,13 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { ? ? ? ?.debounce_interval ? ? ?= 30, ?}; +static struct i2c_board_info teton_bga_i2c_info[]__initdata = { + ? ? ? { + ? ? ? ? ? ? ? I2C_BOARD_INFO("ds1337", 0x68), + ? ? ? ? ? ? ? .irq = gpio_to_irq(RTC_INT_GPIO) + ? ? ? }, +}; + ?static void __init teton_bga_init(void) ?{ ? ? ? ?mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));@@ -62,6 +77,7 @@ static void __init teton_bga_init(void)? ? ? ?/* on-chip devices */
? ? ? ?pxa168_add_uart(1);
? ? ? ?pxa168_add_keypad(&teton_bga_keypad_info);
+ ? ? ?pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); ?}?MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") --
1.7.0.4
Quoted 6 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html Please read the FAQ at ?http://www.tux.org/lkml/
Acked
Marek Vasut
Acked-byRe: [PATCH v2 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337
Dne Po 13. z??? 2010 07:34:36 Haojian Zhuang napsal(a):
Quoted 1 line
On Mon, Sep 13, 2010 at 11:51 AM, Mark F. Brown <[email protected]>
Quoted 59 lines · wrote:
Quoted 59 lines
Defined I2C/ALARM pin definitions
DS1337 RTC alarm support is tied toRTC_INT_GPIOSigned-off-by Mark F. Brown <[email protected]>--- arch/arm/mach-mmp/teton_bga.c | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)(quoted diff) +0
-0
b/arch/arm/mach-mmp/teton_bga.cindex 2966117..d631bbc 100644arch/arm/mach-mmp/teton_bga.c +16
-1@@ -18,6 +18,7 @@#include <linux/gpio.h> #include <linux/input.h> #include <plat/pxa27x_keypad.h> +#include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,6 +39,13 @@ static unsigned long teton_bga_pin_config[] __initdata = {GPIO110_KP_MKIN0 ,GPIO111_KP_MKOUT7 ,GPIO112_KP_MKOUT6 , + +/* I2C Bus */ +GPIO105_CI2C_SDA , +GPIO106_CI2C_SCL , + +/* RTC */ +GPIO78_GPIO , }; static unsigned int teton_bga_matrix_key_map[] = {@@ -55,6 +63,13 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { .debounce_interval = 30, }; +static struct i2c_board_info teton_bga_i2c_info[]__initdata = { + { +I2C_BOARD_INFO ("ds1337" ,0x68 ), + .irq =gpio_to_irq (RTC_INT_GPIO ) + }, +}; +static void __init teton_bga_init (void ) {mfp_config (ARRAY_AND_SIZE (teton_bga_pin_config));@@ -62,6 +77,7 @@ static void __init teton_bga_init(void)/* on-chip devices */ pxa168_add_uart (1 );pxa168_add_keypad (&teton_bga_keypad_info); +pxa168_add_twsi (0 ,NULL ,ARRAY_AND_SIZE (teton_bga_i2c_info)); }MACHINE_START (TETON_BGA ,"PXA168-based Teton BGA Development Platform" ) --1.7.0.4
Quoted 7 lines
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/Acked
Yes, they look good:
Re: [PATCH v2 3/3] ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337
In reply to Mark F. BrownQuoted 4 lines · Mark F. Brown
Defined I2C/ALARM pin definitions
DS1337 RTC alarm support is tied toRTC_INT_GPIOSigned-off-by Mark F. Brown <[email protected]>
Applied with Acks.
Quoted 56 lines
---
?arch/arm/mach-mmp/teton_bga.c | ? 16 ++++++++++++++++ ?1 files changed, 16 insertions(+), 0 deletions(-)arch/arm/mach-mmp/teton_bga.c +0
-0@@ -18,6 +18,7 @@?#include <
linux/gpio.h>
?#include <linux/input.h>
?#include <plat/pxa27x_keypad.h>
+#include <linux/i2c.h>?#include <
asm/mach-types.h>
?#include <asm/mach/arch.h>arch/arm/mach-mmp/teton_bga.c +14
-0@@ -38,6 +39,13 @@ static unsigned long teton_bga_pin_config[] __initdata = { ? ? ? ?GPIO110_KP_MKIN0, ? ? ? ?GPIO111_KP_MKOUT7, ? ? ? ?GPIO112_KP_MKOUT6, + + ? ? ? /* I2C Bus */ + ? ? ? GPIO105_CI2C_SDA, + ? ? ? GPIO106_CI2C_SCL, + + ? ? ? /* RTC */ + ? ? ? GPIO78_GPIO, ?}; ?static unsigned int teton_bga_matrix_key_map[] = {@@ -55,6 +63,13 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { ? ? ? ?.debounce_interval ? ? ?= 30, ?}; +static struct i2c_board_info teton_bga_i2c_info[]__initdata = { + ? ? ? { + ? ? ? ? ? ? ? I2C_BOARD_INFO("ds1337", 0x68), + ? ? ? ? ? ? ? .irq = gpio_to_irq(RTC_INT_GPIO) + ? ? ? }, +}; + ?static void __init teton_bga_init(void) ?{ ? ? ? ?mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));@@ -62,6 +77,7 @@ static void __init teton_bga_init(void)? ? ? ?/* on-chip devices */
? ? ? ?pxa168_add_uart(1);
? ? ? ?pxa168_add_keypad(&teton_bga_keypad_info);
+ ? ? ?pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); ?}?MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") --
1.7.0.4