Skip to contentSkip to conversation

Remove unused default configurations

PATCH New Vincent Sanders 10 participants 23 messages Sep 13, 2010 – Oct 6, 2010 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

Several default configurations have failed to build for the entire 2.6.36 cycle. There are several causes to these faliures. The exact issues can be tracked on http://armlinux.simtec.co.uk/kautobuild/

Obviously the maintainers are not using these default configurations because if they were they would have fixed the build issues by now.

As Linus has made it very clear the number of default configurations must be reduced as much as possible I have come up with the following series which will remove these nine unused configurations. This will reduce our build coverage by ten machines as all but one are a single config per machine.

 msm_defconfig               |   72 ------------------
 mx1_defconfig               |   90 -----------------------
 mx51_defconfig              |  171 --------------------------------------------
 n8x0_defconfig              |   94 ------------------------
 omap_generic_2420_defconfig |   37 ---------
 pxa3xx_defconfig            |  134 ----------------------------------
 qil-a9260_defconfig         |  115 -----------------------------
 usb-a9260_defconfig         |  106 ---------------------------
 usb-a9263_defconfig         |  106 ---------------------------
 9 files changed, 925 deletions(-)
#1 lore raw

PATCH 1/9 Remove unused default configuration

From: Vincent Sanders <[email protected]>

The msm default configuration has not built throughout the 2.6.36 series (since 2.6.35). The build has failed with

arch/arm/mach-msm/board-halibut.c: In function 'halibut_fixup':
arch/arm/mach-msm/board-halibut.c:86: error: 'struct membank' has no member named 'node' arch/arm/mach-msm/board-halibut.c:86: error: implicit declaration of function 'PHYS_TO_NID'

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/msm_defconfig |   72 ----------------------------------------
 1 files changed, 0 insertions(+), 72 deletions(-)
 delete mode 100644 arch/arm/configs/msm_defconfig
arch/arm/configs/msm_defconfig deleted +0 -72
deleted file mode 100644
index 2b8f7af..0000000
@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MSM=y
-CONFIG_MACH_HALIBUT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_MSM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 2/9 Remove unused default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The mx1 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x7c12c): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/mx1_defconfig |   90 ----------------------------------------
 1 files changed, 0 insertions(+), 90 deletions(-)
 delete mode 100644 arch/arm/configs/mx1_defconfig
arch/arm/configs/mx1_defconfig deleted +0 -90
deleted file mode 100644
index 2f38d97..0000000
@@ -1,90 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX1=y
-CONFIG_ARCH_MX1ADS=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
Signature · 1 line
1.7.0.4
#3 lore raw

PATCH 2/9 Remove unused default configuration

Hi Vincent,

you seem to have missed to add mx1 to the subject. This nearly made it fall through my filter. (It's a "manual" one that picks interesting mails by looking at the subject.)

Quoted 9 lines · Vincent Sanders

From: Vincent Sanders <[email protected]>

The mx1 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x7c12c): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

NACK. This build failure was reported with a patch proposal at Aug 25 that is a week after it was pulled into Linus' tree which IMHO is fast enough considering that the breakage isn't mx1 related at all. Up to now it didn't result in a patch that was accepted into Linus' tree though.

The full discussion can be found at

	http://thread.gmane.org/gmane.linux.kernel/1027380

s/appers/appears/ BTW

Thanks
Uwe

Signature · 2 lines
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
#4 lore raw

PATCH 3/9 Remove unused default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The mx51 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x7c12c): undefined reference to `svc_gss_principal'

In addition this build has several unique warnings

arch/arm/mach-mx5/clock-mx51.c:624: warning: 'ckih_clk' defined but not used arch/arm/mach-mx5/clock-mx51.c:628: warning: 'ckih2_clk' defined but not used arch/arm/mach-mx5/clock-mx51.c:747: warning: 'aips_tz2_clk' defined but not used arch/arm/mach-mx5/clock-mx51.c:756: warning: 'gpt_32k_clk' defined but not used arch/arm/mach-mx5/clock-mx51.c:792: warning: 'uart1_ipg_clk' defined but not used arch/arm/mach-mx5/clock-mx51.c:794: warning: 'uart2_ipg_clk' defined but not used arch/arm/mach-mx5/clock-mx51.c:796: warning: 'uart3_ipg_clk' defined but not used arch/arm/mach-mx5/clock-mx51.c:802: warning: 'gpt_ipg_clk' defined but not used arch/arm/mach-mx5/board-mx51_babbage.c: In function 'initialize_otg_port':
arch/arm/mach-mx5/board-mx51_babbage.c:184: warning: assignment makes integer from pointer without a cast arch/arm/mach-mx5/board-mx51_babbage.c: In function 'initialize_usbh1_port':
arch/arm/mach-mx5/board-mx51_babbage.c:202: warning: assignment makes integer from pointer without a cast arch/arm/plat-mxc/ehci.c: In function 'mxc_initialize_usb_hw':
arch/arm/plat-mxc/ehci.c:260: warning: assignment makes integer from pointer without a cast arch/arm/plat-mxc/ehci.c:263: warning: assignment makes integer from pointer without a cast arch/arm/plat-mxc/ehci.c:270: warning: assignment makes integer from pointer without a cast

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/mx51_defconfig |  171 ---------------------------------------
 1 files changed, 0 insertions(+), 171 deletions(-)
 delete mode 100644 arch/arm/configs/mx51_defconfig
arch/arm/configs/mx51_defconfig deleted +0 -171
deleted file mode 100644
index a665ecb..0000000
@@ -1,171 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_RELAY=y
-CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_TEST_SUSPEND=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_GPIO=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_SDHCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_KEYS=y
-CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
Signature · 1 line
1.7.0.4
#5 lore raw

PATCH 4/9 Remove unused n8x0 default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The n8x0 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The link has failed with

arch/arm/plat-omap/built-in.o: In function `newled_init':
/var/tmp/kernel-orig/arch/arm/plat-omap/debug-leds.c:249: undefined reference to `led_classdev_register'

In addition there is a modpost warning about six section mismatches

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/n8x0_defconfig |   94 ---------------------------------------
 1 files changed, 0 insertions(+), 94 deletions(-)
 delete mode 100644 arch/arm/configs/n8x0_defconfig
arch/arm/configs/n8x0_defconfig deleted +0 -94
deleted file mode 100644
index 56aebb6..0000000
@@ -1,94 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_NOKIA_N8X0=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x10C08000
-CONFIG_ZBOOT_ROM_BSS=0x10200000
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-# CONFIG_HWMON is not set
-CONFIG_MENELAUS=y
-CONFIG_REGULATOR=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_EEM=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRC_CCITT=y
Signature · 1 line
1.7.0.4
#6 lore raw

PATCH 5/9 Remove unused omap generic 2420 default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The omap_generic_2420 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The link has failed with

arch/arm/plat-omap/built-in.o: In function `newled_init':
/var/tmp/kernel-orig/arch/arm/plat-omap/debug-leds.c:249: undefined reference to `led_classdev_register'

In addition there is a modpost warning about six section mismatches

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/omap_generic_2420_defconfig |   37 --------------------------
 1 files changed, 0 insertions(+), 37 deletions(-)
 delete mode 100644 arch/arm/configs/omap_generic_2420_defconfig
arch/arm/configs/omap_generic_2420_defconfig deleted +0 -37
deleted file mode 100644
index ac08e51..0000000
@@ -1,37 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x10C08000
-CONFIG_ZBOOT_ROM_BSS=0x10200000
-CONFIG_FPE_NWFPE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_INOTIFY=y
-CONFIG_ROMFS_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRC_CCITT=y
Signature · 1 line
1.7.0.4
#7 lore raw

PATCH 6/9 Remove unused pxa3xx default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The pxa3xx default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_lzo.c:(.text+0x817bc): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/pxa3xx_defconfig |  134 -------------------------------------
 1 files changed, 0 insertions(+), 134 deletions(-)
 delete mode 100644 arch/arm/configs/pxa3xx_defconfig
arch/arm/configs/pxa3xx_defconfig deleted +0 -134
deleted file mode 100644
index 1677a06..0000000
@@ -1,134 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_MOUSE_PXA930_TRKBALL=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_MAX732X=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_MAX7301=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_DEBUG=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DA9030=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_DA903X=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_DA903X=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
Signature · 1 line
1.7.0.4
#8 lore raw

PATCH 6/9 Remove unused pxa3xx default configuration

Quoted 5 lines · Vincent Sanders

From: Vincent Sanders <[email protected]>

The pxa3xx default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

Quoted 7 lines

fs/built-in.o: In function `nfs_callback_authenticate':
compr_lzo.c:(.text+0x817bc): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

---

Hi Vincent,

Thanks for your reporting on this build failure. Please hold on this patch. I can fix it.

Best Regards
Haojian

#9 lore raw

PATCH 6/9 Remove unused pxa3xx default configuration

In reply to Vincent Sanders
Quoted 9 lines · Vincent Sanders

From: Vincent Sanders <[email protected]>

The pxa3xx default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_lzo.c:(.text+0x817bc): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

This is incorrect and I'm still using that.

Quoted 4 lines

---
?arch/arm/configs/pxa3xx_defconfig | ?134 -------------------------------------

This is not necessary and is not a correct fix. (this is even not a fix, is it?)

Uwe should already have a proper fix for this and supposedly get upstreamed.

Quoted 152 lines

?1 files changed, 0 insertions(+), 134 deletions(-) ?delete mode 100644 arch/arm/configs/pxa3xx_defconfig

arch/arm/configs/pxa3xx_defconfig deleted +0 -135
deleted file mode 100644
index 1677a06..0000000
@@ -1,134 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_MOUSE_PXA930_TRKBALL=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_MAX732X=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_MAX7301=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_DEBUG=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DA9030=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_DA903X=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_DA903X=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
--

1.7.0.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#10 lore raw

PATCH 7/9 Remove unused qil-a9260 default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The qil-a9260 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/qil-a9260_defconfig |  115 ----------------------------------
 1 files changed, 0 insertions(+), 115 deletions(-)
 delete mode 100644 arch/arm/configs/qil-a9260_defconfig
arch/arm/configs/qil-a9260_defconfig deleted +0 -115
deleted file mode 100644
index 9160f3b..0000000
@@ -1,115 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_EARLY_USART0=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T94=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
Signature · 1 line
1.7.0.4
#11 lore raw

PATCH 8/9 Remove unused usb-a9260 default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The usb-a9260 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/usb-a9260_defconfig |  106 ----------------------------------
 1 files changed, 0 insertions(+), 106 deletions(-)
 delete mode 100644 arch/arm/configs/usb-a9260_defconfig
arch/arm/configs/usb-a9260_defconfig deleted +0 -106
deleted file mode 100644
index 2e39f38..0000000
@@ -1,106 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
Signature · 1 line
1.7.0.4
#12 lore raw

PATCH 9/9 Remove unused usb-a9263 default configuration

In reply to Vincent Sanders

From: Vincent Sanders <[email protected]>

The usb-a9263 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

---
 arch/arm/configs/usb-a9263_defconfig |  106 ----------------------------------
 1 files changed, 0 insertions(+), 106 deletions(-)
 delete mode 100644 arch/arm/configs/usb-a9263_defconfig
arch/arm/configs/usb-a9263_defconfig deleted +0 -106
deleted file mode 100644
index ee82d09..0000000
@@ -1,106 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_USB_A9263=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
Signature · 1 line
1.7.0.4
#13 lore raw

PATCH 9/9 Remove unused usb-a9263 default configuration

Quoted 11 lines · Vincent Sanders

From: Vincent Sanders <[email protected]>

The usb-a9263 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

can we at least put in Cc the configs Maintainers before drop any of them?

Best Regards,
J.

#14 lore raw

PATCH 9/9 Remove unused usb-a9263 default configuration

Quoted 6 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 5 lines · Vincent Sanders

From: Vincent Sanders <[email protected]>

The usb-a9263 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

Quoted 7 lines
Quoted 6 lines

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

This configuration appers to be unused by the maintainer so remove it.

can we at least put in Cc the configs Maintainers before drop any of them?

I have stopped running around after people individually, if they cannot be bothered to check their configurations compile I cannot be bothered to run around after them individually.

Been chasing after Maintainers for five years and aside from a few exceptions I ususally get a negative response, time for a new tactic. The blunt approach seems to work for Linus so I shall try that.

Signature · 2 lines
Regards Vincent
http://www.kyllikki.org/
#15 lore raw

PATCH 9/9 Remove unused usb-a9263 default configuration

In reply to Vincent Sanders

Hello,

Quoted 2 lines · On Mon, 13 Sep 2010 16:13:52 +0100 Vincent Sanders <[email protected]> wrote:

The usb-a9263 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

I'm actually using this config quite regularly on the Calao USB A9263 board, so I'd prefer to keep this defconfig in the kernel, unless there is a more general AT91 defconfig that actually works on this particular board.

Quoted 2 lines

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

Would a patch to fix this prevent this defconfig from being removed ?

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#16 lore raw

PATCH 9/9 Remove unused usb-a9263 default configuration

Quoted 13 lines · Thomas Petazzoni

Hello,

Quoted 2 lines · On Mon, 13 Sep 2010 16:13:52 +0100 Vincent Sanders <[email protected]> wrote:

The usb-a9263 default configuration has not built throughout the 2.6.36 series (since 2.6.35-git1). The kernel link has failed with

I'm actually using this config quite regularly on the Calao USB A9263 board, so I'd prefer to keep this defconfig in the kernel, unless there is a more general AT91 defconfig that actually works on this particular board.

Quoted 4 lines
Quoted 2 lines

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

Would a patch to fix this prevent this defconfig from being removed ?

Of course, if this defconfig is actually used thats great, but as I point out it has not been built for the entire release so the maintainer has obviously not checked.

Quoted 14 lines

Thanks,

Thomas

Signature · 9 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 2 lines
Regards Vincent
http://www.kyllikki.org/
#17 lore raw

PATCH 9/9 Remove unused usb-a9263 default configuration

In reply to Vincent Sanders

hi,

Quoted 2 lines

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

That error would seem to imply that NFS support is broken, broken on ARM, or the KConfig dependencies for NFS are not correct?

Regards,
Andrew Victor

#18 lore raw

PATCH 9/9 Remove unused usb-a9263 default configuration

Quoted 7 lines · avictor.za at gmail.com

hi,

Quoted 2 lines

fs/built-in.o: In function `nfs_callback_authenticate':
compr_zlib.c:(.text+0x8cf18): undefined reference to `svc_gss_principal'

That error would seem to imply that NFS support is broken, broken on ARM, or the KConfig dependencies for NFS are not correct?

The question is: why has no one noticed and/or complained to the NFS people about this - or if they have, can they speak up soon?

If nothing has happened, then Vince is quite correct - if a defconfig has failed to build for a while and no one has noticed, that's because it isn't being used. If it isn't being used, it can be removed.

#19 lore raw
In reply to Vincent Sanders
Quoted 4 lines · Vincent Sanders

Several default configurations have failed to build for the entire 2.6.36 cycle. There are several causes to these faliures. The exact issues can be tracked on http://armlinux.simtec.co.uk/kautobuild/

Quoted 8 lines

Obviously the maintainers are not using these default configurations because if they were they would have fixed the build issues by now.

As Linus has made it very clear the number of default configurations must be reduced as much as possible I have come up with the following series which will remove these nine unused configurations. This will reduce our build coverage by ten machines as all but one are a single config per machine.

I can't speak for anyone else, but I would prefer to see fixes for the build issues. ARM has way too many build issues.

Daniel

Signature · 2 lines
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
#20 lore raw
Quoted 8 lines · Daniel Walker
Quoted 7 lines · Vincent Sanders

Several default configurations have failed to build for the entire 2.6.36 cycle. There are several causes to these faliures. The exact issues can be tracked on http://armlinux.simtec.co.uk/kautobuild/

Obviously the maintainers are not using these default configurations because if they were they would have fixed the build issues by now.

Quoted 8 lines
Quoted 5 lines

As Linus has made it very clear the number of default configurations must be reduced as much as possible I have come up with the following series which will remove these nine unused configurations. This will reduce our build coverage by ten machines as all but one are a single config per machine.

I can't speak for anyone else, but I would prefer to see fixes for the build issues.

+1

Quoted 15 lines

ARM has way too many build issues.

Daniel

--

Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#21 lore raw
In reply to Vincent Sanders
Quoted 14 lines · Vincent Sanders

Several default configurations have failed to build for the entire 2.6.36 cycle. There are several causes to these faliures. The exact issues can be tracked on http://armlinux.simtec.co.uk/kautobuild/

Obviously the maintainers are not using these default configurations because if they were they would have fixed the build issues by now.

As Linus has made it very clear the number of default configurations must be reduced as much as possible I have come up with the following series which will remove these nine unused configurations. This will reduce our build coverage by ten machines as all but one are a single config per machine.

Quoted 3 lines
?msm_defconfig ? ? ? ? ? ? ? | ? 72 ------------------
?mx1_defconfig ? ? ? ? ? ? ? | ? 90 -----------------------
?mx51_defconfig ? ? ? ? ? ? ?| ?171 --------------------------------------------

Could we please keep mx51?

I'll attempt to fix the problems.

Quoted 8 lines
?n8x0_defconfig ? ? ? ? ? ? ?| ? 94 ------------------------
?omap_generic_2420_defconfig | ? 37 ---------
?pxa3xx_defconfig ? ? ? ? ? ?| ?134 ----------------------------------
?qil-a9260_defconfig ? ? ? ? | ?115 -----------------------------
?usb-a9260_defconfig ? ? ? ? | ?106 ---------------------------
?usb-a9263_defconfig ? ? ? ? | ?106 ---------------------------

?9 files changed, 925 deletions(-)

#22 lore raw
Quoted 15 lines · Amit Kucheria
Quoted 14 lines · Vincent Sanders

Several default configurations have failed to build for the entire 2.6.36 cycle. There are several causes to these faliures. The exact issues can be tracked on http://armlinux.simtec.co.uk/kautobuild/

Obviously the maintainers are not using these default configurations because if they were they would have fixed the build issues by now.

As Linus has made it very clear the number of default configurations must be reduced as much as possible I have come up with the following series which will remove these nine unused configurations. This will reduce our build coverage by ten machines as all but one are a single config per machine.

Quoted 7 lines
Quoted 3 lines
?msm_defconfig ? ? ? ? ? ? ? | ? 72 ------------------
?mx1_defconfig ? ? ? ? ? ? ? | ? 90 -----------------------
?mx51_defconfig ? ? ? ? ? ? ?| ?171 --------------------------------------------

Could we please keep mx51?

I'll attempt to fix the problems.

No need to hurry, the problems are already solved in Linus' and Sascha's trees. :-)

Best regards
Uwe

Signature · 2 lines
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |