Skip to contentSkip to conversation

alsa-lib: bump to 1.0.23

PATCH New Martin Banky 4 participants 37 messages Sep 14, 2010 – Sep 21, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/21 alsa-lib: bump to 1.0.23

---
 CHANGES                                            |    2 +-
 .../alsa-lib-1.0.18-avr32-bad-inline.patch         |   91 --------------------
 .../alsa-lib-1.0.23-avr32-bad-inline.patch         |   91 ++++++++++++++++++++
 package/multimedia/alsa-lib/alsa-lib.mk            |    2 +-
 4 files changed, 93 insertions(+), 93 deletions(-)
 delete mode 100644 package/multimedia/alsa-lib/alsa-lib-1.0.18-avr32-bad-inline.patch
 create mode 100644 package/multimedia/alsa-lib/alsa-lib-1.0.23-avr32-bad-inline.patch
CHANGES +1 -1
index a9e5d1f..1851543 100644
@@ -7,7 +7,7 @@
 
 	Toolchain: ARM cortex A9 support
 
-	Updated/fixed packages: berkeleydb, busybox, dropbear,
+	Updated/fixed packages: alsa-lib, berkeleydb, busybox, dropbear,
 	iptables, kismet, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
package/multimedia/alsa-lib/alsa-lib-1.0.18-avr32-bad-inline.patch deleted +0 -91

91 lines not on this page · raw message

package/multimedia/alsa-lib/alsa-lib-1.0.23-avr32-bad-inline.patch new file +91 -0

91 lines not on this page · raw message

package/multimedia/alsa-lib/alsa-lib.mk +1 -1
index 6e4c575..e0e9032 100644
@@ -3,7 +3,7 @@
 # alsa-lib
 #
 #############################################################
-ALSA_LIB_VERSION = 1.0.22
+ALSA_LIB_VERSION = 1.0.23
 ALSA_LIB_SOURCE = alsa-lib-$(ALSA_LIB_VERSION).tar.bz2
 ALSA_LIB_SITE = ftp://ftp.alsa-project.org/pub/lib
 ALSA_LIB_INSTALL_STAGING = YES
Signature · 1 line
1.7.2.3
#1 lore raw

PATCH 2/21 alsa-utils: bump to 1.0.23

---
 CHANGES                                            |    4 ++--
 ...tils-1.0.18-check-if-__use_bsd-is-defined.patch |   13 -------------
 .../alsa-utils-1.0.18-fix-intl-support.patch       |   11 -----------
 .../alsa-utils-1.0.18-fix_sysv_legacy.patch        |   20 --------------------
 .../alsa-utils/alsa-utils-1.0.18-remove_man.patch  |   11 -----------
 .../alsa-utils-1.0.23-fix-intl-support.patch       |   11 +++++++++++
 .../alsa-utils/alsa-utils-1.0.23-remove_man.patch  |   11 +++++++++++
 package/multimedia/alsa-utils/alsa-utils.mk        |    2 +-
 8 files changed, 25 insertions(+), 58 deletions(-)
 delete mode 100644 package/multimedia/alsa-utils/alsa-utils-1.0.18-check-if-__use_bsd-is-defined.patch
 delete mode 100644 package/multimedia/alsa-utils/alsa-utils-1.0.18-fix-intl-support.patch
 delete mode 100644 package/multimedia/alsa-utils/alsa-utils-1.0.18-fix_sysv_legacy.patch
 delete mode 100644 package/multimedia/alsa-utils/alsa-utils-1.0.18-remove_man.patch
 create mode 100644 package/multimedia/alsa-utils/alsa-utils-1.0.23-fix-intl-support.patch
 create mode 100644 package/multimedia/alsa-utils/alsa-utils-1.0.23-remove_man.patch
CHANGES +2 -2
index 1851543..7b5875c 100644
@@ -7,8 +7,8 @@
 
 	Toolchain: ARM cortex A9 support
 
-	Updated/fixed packages: alsa-lib, berkeleydb, busybox, dropbear,
-	iptables, kismet, openvpn, qt, usbutils
+	Updated/fixed packages: alsa-lib, alsa-utils, berkeleydb, busybox,
+	dropbear, iptables, kismet, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/multimedia/alsa-utils/alsa-utils-1.0.18-check-if-__use_bsd-is-defined.patch deleted +0 -13
deleted file mode 100644
index f0d3209..0000000
@@ -1,13 +0,0 @@
-Index: alsa-utils-1.0.18/alsactl/init_sysdeps.c
-===================================================================
---- alsa-utils-1.0.18.orig/alsactl/init_sysdeps.c	2008-12-01 08:27:16.000000000 +0100
-+++ alsa-utils-1.0.18/alsactl/init_sysdeps.c	2008-12-01 08:27:22.000000000 +0100
-@@ -17,7 +17,7 @@
-  *
-  */
- 
--#ifdef __GLIBC__
-+#if defined(__GLIBC__) && !defined(__USE_BSD)
- static size_t strlcpy(char *dst, const char *src, size_t size)
- {
- 	size_t bytes = 0;
package/multimedia/alsa-utils/alsa-utils-1.0.18-fix-intl-support.patch deleted +0 -11
deleted file mode 100644
index 317c472..0000000
@@ -1,11 +0,0 @@
---- a/seq/aseqnet/Makefile.in
-+++ b/seq/aseqnet/Makefile.in
-@@ -252,7 +252,7 @@ clean-binPROGRAMS:
- 	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
- aseqnet$(EXEEXT): $(aseqnet_OBJECTS) $(aseqnet_DEPENDENCIES) 
- 	@rm -f aseqnet$(EXEEXT)
--	$(LINK) $(aseqnet_LDFLAGS) $(aseqnet_OBJECTS) $(aseqnet_LDADD) $(LIBS)
-+	$(LINK) $(aseqnet_LDFLAGS) $(aseqnet_OBJECTS) $(aseqnet_LDADD) $(LIBS) $(INTLLIBS)
- 
- mostlyclean-compile:
- 	-rm -f *.$(OBJEXT)
package/multimedia/alsa-utils/alsa-utils-1.0.18-fix_sysv_legacy.patch deleted +0 -20
deleted file mode 100644
index c6135b4..0000000
@@ -1,20 +0,0 @@
---- a/alsactl/init_parse.c	2009-01-15 10:44:48.000000000 +0000
-+++ b/alsactl/init_parse.c	2009-01-15 10:46:41.000000000 +0000
-@@ -381,7 +381,7 @@ static int set_ctl_value(struct space *s
- 				snd_ctl_elem_value_set_integer(space->ctl_value, idx, val);
- 			} else if (items > 2 && value[items-2] == 'd' && value[items-1] == 'B') {
- 				val = strtol(value, NULL, 0) * 100;
--				if ((pos2 = index(value, '.')) != NULL) {
-+				if ((pos2 = strchr(value, '.')) != NULL) {
- 					if (isdigit(*(pos2-1)) && isdigit(*(pos2-2))) {
- 						if (val < 0)
- 							val -= strtol(pos2 + 1, NULL, 0);
-@@ -1253,7 +1253,7 @@ static char *new_root_dir(const char *fi
- 
- 	res = strdup(filename);
- 	if (res) {
--		tmp = rindex(res, '/');
-+		tmp = strrchr(res, '/');
- 		if (tmp)
- 			*tmp = '\0';
- 	}
package/multimedia/alsa-utils/alsa-utils-1.0.18-remove_man.patch deleted +0 -11
deleted file mode 100644
index a7d4679..0000000
@@ -1,11 +0,0 @@
---- a/alsactl/Makefile.in	2009-01-15 10:59:38.000000000 +0000
-+++ b/alsactl/Makefile.in	2009-01-15 10:59:34.000000000 +0000
-@@ -204,7 +204,7 @@ sharedstatedir = @sharedstatedir@
- sysconfdir = @sysconfdir@
- target_alias = @target_alias@
- SUBDIRS = init
--man_MANS = alsactl.1 alsactl_init.7
-+man_MANS = alsactl.1
- EXTRA_DIST = alsactl.1 alsactl_init.xml
- alsactl_SOURCES = alsactl.c state.c utils.c init_parse.c
- noinst_HEADERS = alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
package/multimedia/alsa-utils/alsa-utils-1.0.23-fix-intl-support.patch new file +11 -0
new file mode 100644
index 0000000..317c472
@@ -0,0 +1,11 @@
+--- a/seq/aseqnet/Makefile.in
++++ b/seq/aseqnet/Makefile.in
+@@ -252,7 +252,7 @@ clean-binPROGRAMS:
+ 	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+ aseqnet$(EXEEXT): $(aseqnet_OBJECTS) $(aseqnet_DEPENDENCIES) 
+ 	@rm -f aseqnet$(EXEEXT)
+-	$(LINK) $(aseqnet_LDFLAGS) $(aseqnet_OBJECTS) $(aseqnet_LDADD) $(LIBS)
++	$(LINK) $(aseqnet_LDFLAGS) $(aseqnet_OBJECTS) $(aseqnet_LDADD) $(LIBS) $(INTLLIBS)
+ 
+ mostlyclean-compile:
+ 	-rm -f *.$(OBJEXT)
package/multimedia/alsa-utils/alsa-utils-1.0.23-remove_man.patch new file +11 -0
new file mode 100644
index 0000000..34b14ca
@@ -0,0 +1,11 @@
+--- a/alsactl/Makefile.in	2009-01-15 10:59:38.000000000 +0000
++++ b/alsactl/Makefile.in	2009-01-15 10:59:34.000000000 +0000
+@@ -217,7 +217,7 @@ sharedstatedir = @sharedstatedir@
+ target_alias = @target_alias@
+ xmlto = @xmlto@
+ SUBDIRS = init
+-man_MANS = alsactl.1 $(am__append_1)
++man_MANS = alsactl.1
+ EXTRA_DIST = alsactl.1 alsactl_init.xml
+ alsactl_SOURCES = alsactl.c state.c utils.c init_parse.c
+ noinst_HEADERS = alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
package/multimedia/alsa-utils/alsa-utils.mk +1 -1
index 3d1b0ef..20f682a 100644
@@ -3,7 +3,7 @@
 # alsa-utils
 #
 #############################################################
-ALSA_UTILS_VERSION:=1.0.22
+ALSA_UTILS_VERSION:=1.0.23
 ALSA_UTILS_SOURCE:=alsa-utils-$(ALSA_UTILS_VERSION).tar.bz2
 ALSA_UTILS_SITE:=ftp://ftp.alsa-project.org/pub/utils
 ALSA_UTILS_DIR:=$(BUILD_DIR)/alsa-utils-$(ALSA_UTILS_VERSION)
Signature · 1 line
1.7.2.3
#2 lore raw

PATCH 3/21 autoconf: bump to 2.67

In reply to Martin Banky
---
 CHANGES                                            |    5 ++-
 ...toconf-2.65-fix-m4-detection-test-on-dash.patch |   36 --------------------
 package/autoconf/autoconf.mk                       |    2 +-
 3 files changed, 4 insertions(+), 39 deletions(-)
 delete mode 100644 package/autoconf/autoconf-2.65-fix-m4-detection-test-on-dash.patch
CHANGES +3 -2
index 7b5875c..6abd5c0 100644
@@ -7,8 +7,9 @@
 
 	Toolchain: ARM cortex A9 support
 
-	Updated/fixed packages: alsa-lib, alsa-utils, berkeleydb, busybox,
-	dropbear, iptables, kismet, openvpn, qt, usbutils
+	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, 
+	berkeleydb, busybox, dropbear, iptables, kismet, openvpn, qt,
+	usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/autoconf/autoconf-2.65-fix-m4-detection-test-on-dash.patch deleted +0 -36
deleted file mode 100644
index 35f99b2..0000000
@@ -1,36 +0,0 @@
-Patch taken upstream at
-http://git.savannah.gnu.org/cgit/autoconf.git/commit/?id=7f75858f577f11a844781764f30cd42cfe8a5669,
-with the following modifications:
-
- * Changes to NEWS file removed to avoid conflicts
-
- * Changes also made manually to the generated configure
-   script. Otherwise, host-autoconf is needed to compile
-   host-autoconf !
-
-Index: autoconf-2.65.old/configure
-===================================================================
---- autoconf-2.65.old.orig/configure	2009-12-15 16:11:05.175566911 +0100
-+++ autoconf-2.65.old/configure	2009-12-15 16:11:37.739562146 +0100
-@@ -2380,7 +2380,7 @@
-       ac_snippet=change'quote(<,>)in''dir(<if''def>,mac,bug)'
-       ac_snippet=${ac_snippet}pat'subst(a,\(b\)\|\(a\),\1)d'nl
-       test -z "`$ac_path_M4 -F conftest.m4f </dev/null 2>&1`" \
--      && test -z "`echo $ac_snippet | $ac_path_M4 --trace=mac 2>&1`" \
-+      && test -z "`$as_echo $ac_snippet | $ac_path_M4 --trace=mac 2>&1`" \
-       && test -f conftest.m4f \
-       && ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:
-       rm -f conftest.m4f
-Index: autoconf-2.65.old/m4/m4.m4
-===================================================================
---- autoconf-2.65.old.orig/m4/m4.m4	2009-12-15 16:11:05.207566124 +0100
-+++ autoconf-2.65.old/m4/m4.m4	2009-12-15 16:11:18.595562030 +0100
-@@ -29,7 +29,7 @@
-       ac_snippet=change'quote(<,>)in''dir(<if''def>,mac,bug)'
-       ac_snippet=${ac_snippet}pat'subst(a,\(b\)\|\(a\),\1)d'nl
-       test -z "`$ac_path_M4 -F conftest.m4f </dev/null 2>&1`" \
--      && test -z "`echo $ac_snippet | $ac_path_M4 --trace=mac 2>&1`" \
-+      && test -z "`AS_ECHO([$ac_snippet]) | $ac_path_M4 --trace=mac 2>&1`" \
-       && test -f conftest.m4f \
-       && ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:
-       rm -f conftest.m4f],
package/autoconf/autoconf.mk +1 -1
index 8794466..b1fc52d 100644
@@ -3,7 +3,7 @@
 # autoconf
 #
 #############################################################
-AUTOCONF_VERSION = 2.65
+AUTOCONF_VERSION = 2.67
 AUTOCONF_SOURCE = autoconf-$(AUTOCONF_VERSION).tar.bz2
 AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoconf
 
Signature · 1 line
1.7.2.3
#3 lore raw

PATCH 4/21 automake: bump to 1.11.1

In reply to Martin Banky
---
 CHANGES                      |    2 +-
 package/automake/automake.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
CHANGES +1 -1
index 6abd5c0..381e628 100644
@@ -7,7 +7,7 @@
 
 	Toolchain: ARM cortex A9 support
 
-	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, 
+	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, busybox, dropbear, iptables, kismet, openvpn, qt,
 	usbutils
 
package/automake/automake.mk +1 -1
index 46bb773..a7d81ff 100644
@@ -3,7 +3,7 @@
 # automake
 #
 #############################################################
-AUTOMAKE_VERSION = 1.10
+AUTOMAKE_VERSION = 1.11.1
 AUTOMAKE_SOURCE = automake-$(AUTOMAKE_VERSION).tar.bz2
 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake
 
Signature · 1 line
1.7.2.3
#4 lore raw

PATCH 4/21 automake: bump to 1.11.1

I'm still working on a new libtool version to be integrated in buildroot. Amongst others things, automake 1.10.3 is required. So far I've been able to build a rootfs including glib/libsoup/gstreamer/directfb with automake 1.11, so...

Quoted 40 lines · Martin Banky

---
?CHANGES ? ? ? ? ? ? ? ? ? ? ?| ? ?2 +-
?package/automake/automake.mk | ? ?2 +-
?2 files changed, 2 insertions(+), 2 deletions(-)

CHANGES +0 -0
index 6abd5c0..381e628 100644
@@ -7,7 +7,7 @@
 

? ? ? ?Toolchain: ARM cortex A9 support

- ? ? ? Updated/fixed packages: alsa-lib, alsa-utils, autoconf,
+ ? ? ? Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake, ? ? ? ?berkeleydb, busybox, dropbear, iptables, kismet, openvpn, qt, ? ? ? ?usbutils

package/automake/automake.mk +0 -0
index 46bb773..a7d81ff 100644
@@ -3,7 +3,7 @@

?# automake
?# ?#############################################################

package/automake/automake.mk +1 -1
-AUTOMAKE_VERSION = 1.10
+AUTOMAKE_VERSION = 1.11.1

?AUTOMAKE_SOURCE = automake-$(AUTOMAKE_VERSION).tar.bz2 ?AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake

--
1.7.2.3

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#5 lore raw

PATCH 4/21 automake: bump to 1.11.1

Lionel,
Do you have a public repository that I could pull from or a patch set?
I was just trying to upgrade libtool to 2.2.10, and am having issues. I'd like to not duplicate work if possible.
Martin

Quoted 41 lines · Lionel Landwerlin

I'm still working on a new libtool version to be integrated in buildroot. Amongst others things, automake 1.10.3 is required. So far I've been able to build a rootfs including glib/libsoup/gstreamer/directfb with automake 1.11, so...

Quoted 32 lines · Martin Banky
---
 CHANGES                      |    2 +-
 package/automake/automake.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
CHANGES +1 -1
index 6abd5c0..381e628 100644
@@ -7,7 +7,7 @@
 
       Toolchain: ARM cortex A9 support
 
-       Updated/fixed packages: alsa-lib, alsa-utils, autoconf,
+       Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
       berkeleydb, busybox, dropbear, iptables, kismet, openvpn, qt,
       usbutils
 
package/automake/automake.mk +1 -1
index 46bb773..a7d81ff 100644
@@ -3,7 +3,7 @@
 # automake
 #
 #############################################################
-AUTOMAKE_VERSION = 1.10
+AUTOMAKE_VERSION = 1.11.1
 AUTOMAKE_SOURCE = automake-$(AUTOMAKE_VERSION).tar.bz2
 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake
 
Quoted 9 lines
Quoted 8 lines

--
1.7.2.3

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100914/2ab15089/attachment-0001.html>

#6 lore raw

PATCH 4/21 automake: bump to 1.11.1

There is a first try here :

http://git.potipota.net/cgi-bin/cgit.cgi/buildroot/log/?h=new-libtool-at-work

It's based on libtool 2.2.6b, but I'm confident it will work with 2.2.10 too. It's not finished and should not work very well with packages using gettext with uclibc.
I've some more work done in private to handle this issue, I could release it later today/night.

Regards,

--
Lionel Landwerlin

Quoted 66 lines · Martin Banky

Lionel,
???? Do you have a public repository that I could pull from or a patch set? I was just trying to upgrade libtool to 2.2.10, and am having issues. I'd like to not duplicate work if possible.
Martin

Quoted 43 lines · Lionel Landwerlin

I'm still working on a new libtool version to be integrated in buildroot. Amongst others things, automake 1.10.3 is required. So far I've been able to build a rootfs including glib/libsoup/gstreamer/directfb with automake 1.11, so...

Quoted 33 lines · Martin Banky

---
?CHANGES ? ? ? ? ? ? ? ? ? ? ?| ? ?2 +-
?package/automake/automake.mk | ? ?2 +-
?2 files changed, 2 insertions(+), 2 deletions(-)

CHANGES +0 -0
index 6abd5c0..381e628 100644
@@ -7,7 +7,7 @@
 

? ? ? ?Toolchain: ARM cortex A9 support

- ? ? ? Updated/fixed packages: alsa-lib, alsa-utils, autoconf,
+ ? ? ? Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
? ? ? ?berkeleydb, busybox, dropbear, iptables, kismet, openvpn, qt, ? ? ? ?usbutils

package/automake/automake.mk +0 -0
index 46bb773..a7d81ff 100644
@@ -3,7 +3,7 @@

?# automake
?# ?#############################################################

package/automake/automake.mk +1 -1
-AUTOMAKE_VERSION = 1.10
+AUTOMAKE_VERSION = 1.11.1

?AUTOMAKE_SOURCE = automake-$(AUTOMAKE_VERSION).tar.bz2 ?AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake

Quoted 8 lines
Quoted 8 lines

--
1.7.2.3

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#7 lore raw

PATCH 4/21 automake: bump to 1.11.1

Lionel,
Thanks! I'll try it out after I get some sleep, and see how it works.
Martin

Quoted 54 lines · Lionel Landwerlin

There is a first try here :

http://git.potipota.net/cgi-bin/cgit.cgi/buildroot/log/?h=new-libtool-at-work

It's based on libtool 2.2.6b, but I'm confident it will work with 2.2.10 too.
It's not finished and should not work very well with packages using gettext with uclibc.
I've some more work done in private to handle this issue, I could release it later today/night.

Regards,

--
Lionel Landwerlin

Quoted 2 lines · Martin Banky

Lionel,
Do you have a public repository that I could pull from or a patch

set?

Quoted 5 lines

I was just trying to upgrade libtool to 2.2.10, and am having issues. I'd like to not duplicate work if possible.
Martin

On Tue, Sep 14, 2010 at 1:51 AM, Lionel Landwerlin <

llandwerlin at gmail.com>

Quoted 3 lines
Quoted 2 lines · wrote:

I'm still working on a new libtool version to be integrated in

buildroot.

Quoted 22 lines
Quoted 22 lines

Amongst others things, automake 1.10.3 is required. So far I've been able to build a rootfs including glib/libsoup/gstreamer/directfb with automake 1.11, so...

Quoted 14 lines · Martin Banky
---
 CHANGES                      |    2 +-
 package/automake/automake.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
CHANGES +0 -0
index 6abd5c0..381e628 100644
@@ -7,7 +7,7 @@
 
       Toolchain: ARM cortex A9 support
 
Quoted 36 lines
Quoted 7 lines
Quoted 7 lines

package/automake/

Quoted 7 lines
CHANGES +1 -1
-       Updated/fixed packages: alsa-lib, alsa-utils, autoconf,
+       Updated/fixed packages: alsa-lib, alsa-utils, autoconf,
 automake,
       berkeleydb, busybox, dropbear, iptables, kismet, openvpn, qt,
       usbutils
package/automake/ renamed from package/automake/automake.mk +0 -0

automake.mk

Quoted 27 lines
Quoted 12 lines
Quoted 12 lines

index 46bb773..a7d81ff 100644

package/automake/automake.mk +1 -1
@@ -3,7 +3,7 @@
 # automake
 #
 #############################################################
-AUTOMAKE_VERSION = 1.10
+AUTOMAKE_VERSION = 1.11.1
 AUTOMAKE_SOURCE = automake-$(AUTOMAKE_VERSION).tar.bz2
 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake
 
Quoted 8 lines
Quoted 8 lines

--
1.7.2.3

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100915/735a1410/attachment.html>

#8 lore raw

PATCH 5/21 bison: bump to 2.4.3

In reply to Martin Banky
---
 CHANGES                                            |    4 ++--
 .../bison/bison-2.4.3-00-spawn-sched_param.patch   |   12 ++++++++++++
 package/bison/bison.mk                             |    2 +-
 3 files changed, 15 insertions(+), 3 deletions(-)
 create mode 100644 package/bison/bison-2.4.3-00-spawn-sched_param.patch
CHANGES +2 -2
index 381e628..3783dd1 100644
@@ -8,8 +8,8 @@
 	Toolchain: ARM cortex A9 support
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
-	berkeleydb, busybox, dropbear, iptables, kismet, openvpn, qt,
-	usbutils
+	berkeleydb, bison, busybox, dropbear, iptables, kismet, openvpn,
+	qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/bison/bison-2.4.3-00-spawn-sched_param.patch new file +12 -0
new file mode 100644
index 0000000..850ac9e
@@ -0,0 +1,12 @@
+diff -durpN a/lib/spawn.in.h b/lib/spawn.in.h
+--- a/lib/spawn.in.h    2010-01-28 05:04:07.000000000 -0800
++++ b/lib/spawn.in.h      2010-02-27 23:10:41.000000000 -0800
+@@ -31,7 +31,7 @@
+ 
+ /* Get definitions of 'struct sched_param' and 'sigset_t'.
+    But avoid namespace pollution on glibc systems.  */
+-#ifndef __GLIBC__
++#if 1
+ # include <sched.h>
+ # include <signal.h>
+ #endif
package/bison/bison.mk +1 -1
index 9e28e85..075a078 100644
@@ -3,7 +3,7 @@
 # bison
 #
 #############################################################
-BISON_VERSION:=2.3
+BISON_VERSION:=2.4.3
 BISON_SOURCE:=bison-$(BISON_VERSION).tar.bz2
 BISON_SITE:=$(BR2_GNU_MIRROR)/bison
 
Signature · 1 line
1.7.2.3
#9 lore raw

PATCH 5/21 bison: bump to 2.4.3

Quoted 5 lines · On Mon, 13 Sep 2010 20:40:32 -0700 Martin Banky <[email protected]> wrote:

+
+ /* Get definitions of 'struct sched_param' and 'sigset_t'.
+ But avoid namespace pollution on glibc systems. */
+-#ifndef __GLIBC__
++#if 1

Why ? This seems to contradict the comment above.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#10 lore raw

PATCH 5/21 bison: bump to 2.4.3

Thomas,
Sorry, I thought that I had attributed this to the original author, but
alias, I did not. The original author is Michael Deutschmann. See here for the discussion, http://www.mail-archive.com/uclibc at uclibc.org/msg05169.html.

Martin

Quoted 11 lines · Thomas Petazzoni

package/bison/bison-2.4.3-00-spawn-sched_param.patch line 9

Quoted 5 lines · On Mon, 13 Sep 2010 20:40:32 -0700 Martin Banky <[email protected]> wrote:
package/bison/bison-2.4.3-00-spawn-sched_param.patch new file +5 -0
+
+ /* Get definitions of 'struct sched_param' and 'sigset_t'.
+    But avoid namespace pollution on glibc systems.  */
+-#ifndef __GLIBC__
++#if 1

Why ? This seems to contradict the comment above.

Quoted 11 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100918/2abad883/attachment-0001.html>

#11 lore raw

PATCH 6/21 ccache: bump to 3.0.1

In reply to Martin Banky
---
 CHANGES                    |    4 ++--
 toolchain/ccache/ccache.mk |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
CHANGES +2 -2
index 3783dd1..b9cdd48 100644
@@ -8,8 +8,8 @@
 	Toolchain: ARM cortex A9 support
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
-	berkeleydb, bison, busybox, dropbear, iptables, kismet, openvpn,
-	qt, usbutils
+	berkeleydb, bison, busybox, ccache, dropbear, iptables, kismet,
+	openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
toolchain/ccache/ccache.mk +1 -1
index 8e414b2..01d18fb 100644
@@ -3,7 +3,7 @@
 # build ccache to make recompiles faster on the build system
 #
 #############################################################
-CCACHE_VER:=2.4
+CCACHE_VER:=3.0.1
 CCACHE_SITE:=http://samba.org/ftp/ccache
 CCACHE_SOURCE:=ccache-$(CCACHE_VER).tar.gz
 CCACHE_DIR1:=$(TOOLCHAIN_DIR)/ccache-$(CCACHE_VER)
Signature · 1 line
1.7.2.3
#12 lore raw

PATCH 7/21 fakeroot: bump to 1.14.4

In reply to Martin Banky
---
 CHANGES                                    |    4 ++--
 package/fakeroot/fakeroot-doc.patch        |   11 +++++++----
 package/fakeroot/fakeroot-uclibc-LFS.patch |   14 --------------
 package/fakeroot/fakeroot.mk               |    6 +++---
 4 files changed, 12 insertions(+), 23 deletions(-)
 delete mode 100644 package/fakeroot/fakeroot-uclibc-LFS.patch
CHANGES +2 -2
index b9cdd48..0492e3b 100644
@@ -8,8 +8,8 @@
 	Toolchain: ARM cortex A9 support
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
-	berkeleydb, bison, busybox, ccache, dropbear, iptables, kismet,
-	openvpn, qt, usbutils
+	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, iptables,
+	kismet, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/fakeroot/fakeroot-doc.patch +7 -4
index 51a64ca..daa3f5d 100644
@@ -2,6 +2,7 @@
 +++ fakeroot/Makefile.am	2006-04-19 11:50:59.000000000 -0600
 @@ -1,5 +1,5 @@
  AUTOMAKE_OPTIONS=foreign
+ ACLOCAL_AMFLAGS = -I build-aux
 -SUBDIRS=scripts doc test
 +SUBDIRS=scripts test
  
@@ -9,12 +10,14 @@
  libcommunicate_la_SOURCES = communicate.c
 --- fakeroot/Makefile.in.orig	2006-04-19 11:50:43.000000000 -0600
 +++ fakeroot/Makefile.in	2006-04-19 11:51:21.000000000 -0600
-@@ -230,7 +230,7 @@
- top_builddir = @top_builddir@
+@@ -293,7 +293,7 @@
  top_srcdir = @top_srcdir@
  AUTOMAKE_OPTIONS = foreign
+ ACLOCAL_AMFLAGS = -I build-aux
 -SUBDIRS = scripts doc test
 +SUBDIRS = scripts test
- noinst_LTLIBRARIES = libcommunicate.la
+ noinst_LTLIBRARIES = libcommunicate.la libmacosx.la
  libcommunicate_la_SOURCES = communicate.c
- lib_LTLIBRARIES = libfakeroot.la
+ libmacosx_la_SOURCES = libfakeroot_inode64.c libfakeroot_unix2003.c patchattr.h
+
+
package/fakeroot/fakeroot-uclibc-LFS.patch deleted +0 -14
deleted file mode 100644
index 53f0b86..0000000
@@ -1,14 +0,0 @@
-diff -urN fakeroot-1.9.3.orig/communicate.h fakeroot-1.9.3/communicate.h
---- fakeroot-1.9.3.orig/communicate.h	2008-03-11 09:42:05.000000000 -0400
-+++ fakeroot-1.9.3/communicate.h	2008-03-11 10:58:10.000000000 -0400
-@@ -35,7 +35,9 @@
- #endif
- 
- /* Then decide whether we do or do not use the stat64 support */
--#if (defined(sun) && !defined(__SunOS_5_5_1) && !defined(_LP64)) || __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1)
-+#if (defined(sun) && !defined(__SunOS_5_5_1) && !defined(_LP64)) \
-+    || (!defined __UCLIBC__ && (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1))) \
-+    || (defined __UCLIBC__ && defined UCLIBC_HAS_LFS)
- # define STAT64_SUPPORT
- #else
- # warning Not using stat64 support
\ No newline at end of file
package/fakeroot/fakeroot.mk +3 -3
index fd60dbe..eb25815 100644
@@ -3,9 +3,9 @@
 # fakeroot
 #
 #############################################################
-FAKEROOT_VERSION:=1.9.5
-FAKEROOT_SOURCE:=fakeroot_$(FAKEROOT_VERSION).tar.gz
-FAKEROOT_SITE:=http://snapshot.debian.net/archive/2008/04/27/debian/pool/main/f/fakeroot/
+FAKEROOT_VERSION:=1.14.4
+FAKEROOT_SOURCE:=fakeroot_$(FAKEROOT_VERSION).orig.tar.bz2
+FAKEROOT_SITE:=http://ftp.debian.org/debian/pool/main/f/fakeroot/
 FAKEROOT_LIBTOOL_PATCH=NO
 
 define FAKEROOT_PATCH_FAKEROOT_IN
Signature · 1 line
1.7.2.3
#13 lore raw

PATCH 8/21 genext2fs: bump to 1.4.1

In reply to Martin Banky
---
 CHANGES                        |    4 ++--
 package/genext2fs/genext2fs.mk |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
CHANGES +2 -2
index 0492e3b..94a86e8 100644
@@ -8,8 +8,8 @@
 	Toolchain: ARM cortex A9 support
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
-	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, iptables,
-	kismet, openvpn, qt, usbutils
+	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
+	iptables, kismet, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/genext2fs/genext2fs.mk +1 -1
index 8c4981e..b4a8e70 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-GENEXT2FS_VERSION=1.4
+GENEXT2FS_VERSION=1.4.1
 GENEXT2FS_SOURCE=genext2fs-$(GENEXT2FS_VERSION).tar.gz
 GENEXT2FS_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/genext2fs
 
Signature · 1 line
1.7.2.3
#14 lore raw

PATCH 9/21 gmp: bump to 5.0.1

In reply to Martin Banky
---
 CHANGES               |    2 +-
 package/gmp/Config.in |    2 +-
 package/gmp/gmp.mk    |    6 +++---
 3 files changed, 5 insertions(+), 5 deletions(-)
CHANGES +1 -1
index 94a86e8..2185758 100644
@@ -9,7 +9,7 @@
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
-	iptables, kismet, openvpn, qt, usbutils
+	gmp, iptables, kismet, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/gmp/Config.in +1 -1
index 74596f8..9520506 100644
@@ -3,7 +3,7 @@ config BR2_PACKAGE_LIBGMP
 	help
 	  GNU Multiple Precision Arithmetic Library.
 
-	  http://www.swox.com/gmp/
+	  http://gmplib.org/
 
 
 config BR2_PACKAGE_LIBGMP_HEADERS
package/gmp/gmp.mk +3 -3
index a3488b8..4efd88b 100644
@@ -3,7 +3,7 @@
 # gmp
 #
 #############################################################
-GMP_VERSION:=4.2.4
+GMP_VERSION:=5.0.1
 GMP_SOURCE:=gmp-$(GMP_VERSION).tar.bz2
 GMP_SITE:=$(BR2_GNU_MIRROR)/gmp
 GMP_CAT:=$(BZCAT)
@@ -11,7 +11,7 @@ GMP_DIR:=$(TOOLCHAIN_DIR)/gmp-$(GMP_VERSION)
 GMP_TARGET_DIR:=$(BUILD_DIR)/gmp-$(GMP_VERSION)
 GMP_BINARY:=libgmp$(LIBTGTEXT)
 GMP_HOST_BINARY:=libgmp$(HOST_LIBEXT)
-GMP_LIBVERSION:=3.4.4
+GMP_LIBVERSION:=10.0.1
 
 # this is a workaround for a bug in GMP, please see
 # http://gmplib.org/list-archives/gmp-devel/2006-April/000618.html
@@ -32,7 +32,7 @@ $(GMP_DIR)/.unpacked: $(DL_DIR)/$(GMP_SOURCE)
 
 $(GMP_TARGET_DIR)/.configured: $(GMP_DIR)/.unpacked
 	mkdir -p $(GMP_TARGET_DIR)
-	(cd $(GMP_TARGET_DIR); rm -rf config.cache; \
+	(cd $(GMP_TARGET_DIR); rm -rf config.cache; cp $(GMP_DIR)/longlong.h $(GMP_DIR)/gmp-impl.h ./; \
 		$(TARGET_CONFIGURE_OPTS) \
 		$(TARGET_CONFIGURE_ARGS) \
 		$(GMP_CPP_FLAGS) \
Signature · 1 line
1.7.2.3
#15 lore raw

PATCH 9/21 gmp: bump to 5.0.1

package/gmp/gmp.mk $(GMP_DIR)/.unpacked: $(DL_DIR)/$(GMP_SOURCE) · line 35

Quoted 1 line · On Mon, 13 Sep 2010 20:40:36 -0700 Martin Banky <[email protected]> wrote:
package/gmp/gmp.mk +1 -0
+	(cd $(GMP_TARGET_DIR); rm -rf config.cache; cp $(GMP_DIR)/longlong.h $(GMP_DIR)/gmp-impl.h ./; \

Why ? Even if it's really needed, a little bit of explanation in the commit log would help.

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#16 lore raw

PATCH 9/21 gmp: bump to 5.0.1

Thomas,
Per the INSTALL file in mpfr:
"As gmp-impl.h and longlong.h are only in the GMP source directory, you first need to copy these files to the build directory if it is different (there may be other workarounds, such as setting $CPPFLAGS to search the GMP source directory)."
I will change the commit log to reflect this, when I resubmit the patch set with the other asked for changes.

Martin

Quoted 11 lines · Thomas Petazzoni
Quoted 1 line · On Mon, 13 Sep 2010 20:40:36 -0700 Martin Banky <[email protected]> wrote:

+ (cd $(GMP_TARGET_DIR); rm -rf config.cache; cp

$(GMP_DIR)/longlong.h $(GMP_DIR)/gmp-impl.h ./; \

Why ? Even if it's really needed, a little bit of explanation in the commit log would help.

Thanks!

Quoted 11 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100918/333e0d67/attachment.html>

#17 lore raw

PATCH 10/21 libdeamon: bump to 0.14

In reply to Martin Banky
---
 CHANGES                                            |    2 +-
 package/libdaemon/libdaemon.mk                     |    3 +-
 .../libdeamon-0.14-buildroot-libtool.patch         |   53 ++++++++++++++++++++
 3 files changed, 56 insertions(+), 2 deletions(-)
 create mode 100644 package/libdaemon/libdeamon-0.14-buildroot-libtool.patch
CHANGES +1 -1
index 2185758..e2fa369 100644
@@ -9,7 +9,7 @@
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
-	gmp, iptables, kismet, openvpn, qt, usbutils
+	gmp, iptables, kismet, libdeamon, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/libdaemon/libdaemon.mk +2 -1
index 7a9d5c8..57b2c7e 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-LIBDAEMON_VERSION:=0.13
+LIBDAEMON_VERSION:=0.14
 LIBDAEMON_SOURCE:=libdaemon-$(LIBDAEMON_VERSION).tar.gz
 LIBDAEMON_SITE:=http://0pointer.de/lennart/projects/libdaemon/
 LIBDAEMON_AUTORECONF:=no
@@ -12,6 +12,7 @@ LIBDAEMON_INSTALL_STAGING:=YES
 LIBDAEMON_INSTALL_TARGET:=YES
 LIBDAEMON_CONF_ENV:=ac_cv_func_setpgrp_void=no
 LIBDAEMON_CONF_OPT:=--disable-lynx 
+LIBDAEMON_LIBTOOL_PATCH:=no
 
 LIBDAEMON_DEPENDENCIES:=host-pkg-config
 
package/libdaemon/libdeamon-0.14-buildroot-libtool.patch new file +53 -0

53 lines not on this page · raw message

Signature · 1 line
1.7.2.3
#18 lore raw

PATCH 11/21 libelf: bump to 0.8.13

In reply to Martin Banky
---
 CHANGES                  |    2 +-
 package/libelf/libelf.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
CHANGES +1 -1
index e2fa369..e541b7e 100644
@@ -9,7 +9,7 @@
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
-	gmp, iptables, kismet, libdeamon, openvpn, qt, usbutils
+	gmp, iptables, kismet, libdeamon, libelf, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/libelf/libelf.mk +1 -1
index 2a7d066..eb1a1ad 100644
@@ -3,7 +3,7 @@
 # libelf
 #
 #############################################################
-LIBELF_VERSION=0.8.12
+LIBELF_VERSION=0.8.13
 LIBELF_SOURCE=libelf-$(LIBELF_VERSION).tar.gz
 LIBELF_SITE=http://www.mr511.de/software/
 LIBELF_INSTALL_STAGING = YES
Signature · 1 line
1.7.2.3
#19 lore raw

PATCH 12/21 libogg: bump to 1.2.0

In reply to Martin Banky
---
 CHANGES                                            |    3 +-
 .../libogg/libogg-1.2.0-buildroot-libtool.patch    |   53 ++++++++++++++++++++
 package/multimedia/libogg/libogg.mk                |    3 +-
 3 files changed, 57 insertions(+), 2 deletions(-)
 create mode 100644 package/multimedia/libogg/libogg-1.2.0-buildroot-libtool.patch
CHANGES +2 -1
index e541b7e..81e0834 100644
@@ -9,7 +9,8 @@
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
-	gmp, iptables, kismet, libdeamon, libelf, openvpn, qt, usbutils
+	gmp, iptables, kismet, libdeamon, libelf, libogg, openvpn, qt,
+	usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/multimedia/libogg/libogg-1.2.0-buildroot-libtool.patch new file +53 -0

53 lines not on this page · raw message

package/multimedia/libogg/libogg.mk +2 -1
index 02b1976..406de05 100644
@@ -3,12 +3,13 @@
 # libogg
 #
 #############################################################
-LIBOGG_VERSION = 1.1.4
+LIBOGG_VERSION = 1.2.0
 LIBOGG_SOURCE = libogg-$(LIBOGG_VERSION).tar.gz
 LIBOGG_SITE = http://downloads.xiph.org/releases/ogg
 LIBOGG_AUTORECONF = NO
 LIBOGG_INSTALL_STAGING = YES
 LIBOGG_INSTALL_TARGET = YES
+LIBOGG_LIBTOOL_PATCH = no
 
 LIBOGG_DEPENDENCIES = host-pkg-config
 
Signature · 1 line
1.7.2.3
#20 lore raw

PATCH 13/21 libvorbis: bump to 1.3.1

In reply to Martin Banky
---
 CHANGES                                            |    4 +-
 .../libvorbis-1.3.1-buildroot-libtool.patch        |   53 ++++++++++++++++++++
 package/multimedia/libvorbis/libvorbis.mk          |    3 +-
 3 files changed, 57 insertions(+), 3 deletions(-)
 create mode 100644 package/multimedia/libvorbis/libvorbis-1.3.1-buildroot-libtool.patch
CHANGES +2 -2
index 81e0834..3412924 100644
@@ -9,8 +9,8 @@
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
-	gmp, iptables, kismet, libdeamon, libelf, libogg, openvpn, qt,
-	usbutils
+	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis,
+	openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/multimedia/libvorbis/libvorbis-1.3.1-buildroot-libtool.patch new file +53 -0

53 lines not on this page · raw message

package/multimedia/libvorbis/libvorbis.mk +2 -1
index 9a060d9..e735b52 100644
@@ -4,12 +4,13 @@
 #
 #############################################################
 
-LIBVORBIS_VERSION = 1.2.3
+LIBVORBIS_VERSION = 1.3.1
 LIBVORBIS_SOURCE = libvorbis-$(LIBVORBIS_VERSION).tar.gz
 LIBVORBIS_SITE = http://downloads.xiph.org/releases/vorbis/$(LIBVORBIS-SOURCE)
 LIBVORBIS_AUTORECONF = NO
 LIBVORBIS_INSTALL_STAGING = YES
 LIBVORBIS_INSTALL_TARGET = YES
+LIBVORBIS_LIBTOOL_PATCH = no
 
 LIBVORBIS_CONF_OPT = --disable-oggtest
 
Signature · 1 line
1.7.2.3
#21 lore raw

PATCH 14/21 make: bump to 3.82

In reply to Martin Banky
---
 CHANGES              |    2 +-
 package/make/make.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
CHANGES +1 -1
index 3412924..aaffd26 100644
@@ -9,7 +9,7 @@
 
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
-	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis,
+	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis, make,
 	openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
package/make/make.mk +1 -1
index 12d236a..6beccf3 100644
@@ -3,7 +3,7 @@
 # make
 #
 #############################################################
-MAKE_VERSION:=3.81
+MAKE_VERSION:=3.82
 MAKE_SOURCE:=make-$(MAKE_VERSION).tar.bz2
 MAKE_SITE:=$(BR2_GNU_MIRROR)/make
 
Signature · 1 line
1.7.2.3
#22 lore raw

PATCH 15/21 module-init-tools: bump to 3.12

In reply to Martin Banky
---
 CHANGES                                        |    2 +-
 package/module-init-tools/module-init-tools.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
CHANGES +1 -1
index aaffd26..9c89f65 100644
@@ -10,7 +10,7 @@
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
 	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis, make,
-	openvpn, qt, usbutils
+	module-init-tools, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/module-init-tools/module-init-tools.mk +1 -1
index 5dfdaad..27d0159 100644
@@ -3,7 +3,7 @@
 # module-init-tools
 #
 #############################################################
-MODULE_INIT_TOOLS_VERSION=3.11
+MODULE_INIT_TOOLS_VERSION=3.12
 MODULE_INIT_TOOLS_SOURCE=module-init-tools-$(MODULE_INIT_TOOLS_VERSION).tar.bz2
 MODULE_INIT_TOOLS_SITE=$(BR2_KERNEL_MIRROR)/linux/utils/kernel/module-init-tools/
 MODULE_INIT_TOOLS_CONF_ENV = ac_cv_prog_DOCBOOKTOMAN=''
Signature · 1 line
1.7.2.3
#23 lore raw

PATCH 16/21 mpfr: bump to 3.0.0

In reply to Martin Banky
---
 CHANGES              |    2 +-
 package/mpfr/mpfr.mk |    6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
CHANGES +1 -1
index 9c89f65..b17b716 100644
@@ -10,7 +10,7 @@
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
 	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis, make,
-	module-init-tools, openvpn, qt, usbutils
+	module-init-tools, mpfr, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/mpfr/mpfr.mk +3 -3
index a7834dd..ebaa91c 100644
@@ -3,8 +3,8 @@
 # mpfr
 #
 #############################################################
-MPFR_VERSION:=2.4.1
-MPFR_PATCH:=patches
+MPFR_VERSION:=3.0.0
+MPFR_PATCH:=allpatches
 MPFR_PATCH_FILE:=mpfr-$(MPFR_VERSION).patch
 MPFR_SOURCE:=mpfr-$(MPFR_VERSION).tar.bz2
 MPFR_CAT:=$(BZCAT)
@@ -13,7 +13,7 @@ MPFR_DIR:=$(TOOLCHAIN_DIR)/mpfr-$(MPFR_VERSION)
 MPFR_TARGET_DIR:=$(BUILD_DIR)/mpfr-$(MPFR_VERSION)
 MPFR_BINARY:=libmpfr$(LIBTGTEXT)
 MPFR_HOST_BINARY:=libmpfr$(HOST_LIBEXT)
-MPFR_LIBVERSION:=1.2.0
+MPFR_LIBVERSION:=4.0.0
 
 # need patch
 ifneq ($(MPFR_PATCH),)
Signature · 1 line
1.7.2.3
#24 lore raw

PATCH 17/21 nano: bump to 2.2.5

In reply to Martin Banky
---
 CHANGES              |    2 +-
 package/nano/nano.mk |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
CHANGES +1 -1
index b17b716..0b2a6a5 100644
@@ -10,7 +10,7 @@
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
 	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis, make,
-	module-init-tools, mpfr, openvpn, qt, usbutils
+	module-init-tools, mpfr, nano, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/nano/nano.mk +1 -1
index 3e8ba50..e88fda6 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-NANO_VERSION = 2.2.3
+NANO_VERSION = 2.2.5
 NANO_SITE = http://www.nano-editor.org/dist/v2.2
 NANO_MAKE_ENV = CURSES_LIB="-lncurses"
 NANO_CONF_OPT = --without-slang --enable-tiny
Signature · 1 line
1.7.2.3
#25 lore raw

PATCH 18/21 ntp: convert to autotargets and bump to 4.2.6p2

In reply to Martin Banky

Also added additional options for ntp and fixed a build issue when IPv6 support is not available.

---
 CHANGES                                 |    2 +-
 package/ntp/Config.in                   |   44 +++++++
 package/ntp/ntp-4.2.4_p5-adjtimex.patch |   33 ------
 package/ntp/ntp-4.2.4_p5-nano.patch     |   36 ------
 package/ntp/ntp-4.2.6_p2-adjtimex.patch |   33 ++++++
 package/ntp/ntp-optional-ipv6.patch     |   24 ----
 package/ntp/ntp.mk                      |  192 +++++++++++++++++++-----------
 7 files changed, 199 insertions(+), 165 deletions(-)
 delete mode 100644 package/ntp/ntp-4.2.4_p5-adjtimex.patch
 delete mode 100644 package/ntp/ntp-4.2.4_p5-nano.patch
 create mode 100644 package/ntp/ntp-4.2.6_p2-adjtimex.patch
 delete mode 100644 package/ntp/ntp-optional-ipv6.patch
CHANGES +1 -1
index 0b2a6a5..e4e185c 100644
@@ -10,7 +10,7 @@
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
 	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis, make,
-	module-init-tools, mpfr, nano, openvpn, qt, usbutils
+	module-init-tools, mpfr, nano, ntp, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/ntp/Config.in +44 -0

47 lines not on this page · raw message

package/ntp/ntp-4.2.4_p5-adjtimex.patch deleted +0 -33
deleted file mode 100644
index 40625fa..0000000
@@ -1,33 +0,0 @@
-https://support.ntp.org/bugs/show_bug.cgi?id=769
-http://bugs.gentoo.org/254030
-
---- ntp/util/tickadj.c
-+++ ntp/util/tickadj.c
-@@ -21,7 +21,8 @@
- # include <unistd.h>
- #endif /* HAVE_UNISTD_H */
- 
--#ifdef HAVE___ADJTIMEX		/* Linux */
-+/* proper handling here has been moved to upstream ntp bugzilla */
-+#ifdef linux
- 
- #include <sys/timex.h>
- struct timex txc;
-@@ -91,7 +92,7 @@
- 	}
- 
- 	if (!errflg) {
--		if (__adjtimex(&txc) < 0)
-+		if (adjtimex(&txc) < 0)
- 			perror("adjtimex");
- 		else if (!quiet)
- 			printf("tick     = %ld\ntick_adj = %d\n",
-@@ -146,7 +147,7 @@
- #endif
- 	}
-     
--	if (__adjtimex(&txc) < 0)
-+	if (adjtimex(&txc) < 0)
- 	{
- 		perror("adjtimex");
- 	}
package/ntp/ntp-4.2.4_p5-nano.patch deleted +0 -36
deleted file mode 100644
index f4097ee..0000000
@@ -1,36 +0,0 @@
-Fixes the MOD_NANO build failure
-
-ntp_loopfilter.c: In function 'local_clock':
-ntp_loopfilter.c:571: error: 'MOD_NANO' undeclared (first use in this function)
-ntp_loopfilter.c:571: error: (Each undeclared identifier is reported only once
-ntp_loopfilter.c:571: error: for each function it appears in.)
-ntp_loopfilter.c: In function 'loop_config':
-ntp_loopfilter.c:896: error: 'MOD_NANO' undeclared (first use in this function)
-
-Taken from
-http://cvs.fedoraproject.org/viewvc/devel/ntp/ntp-4.2.4p7-nano.patch?revision=1.1&content-type=text/plain&view=co
-
-See the discussion at
-https://bugs.launchpad.net/ubuntu/+source/ntp/+bug/412242 for more
-details and links. The below fix is not a correct fix, but only a
-workaround. The real fix required changes to kernel/libc headers.
-
-Index: ntp-4.2.4p5/include/ntp_syscall.h
-===================================================================
---- ntp-4.2.4p5.orig/include/ntp_syscall.h	2010-05-14 17:34:48.000000000 +0200
-+++ ntp-4.2.4p5/include/ntp_syscall.h	2010-05-14 17:35:13.000000000 +0200
-@@ -14,6 +14,14 @@
- # include <sys/timex.h>
- #endif
- 
-+#if defined(ADJ_NANO) && !defined(MOD_NANO)
-+#define MOD_NANO ADJ_NANO
-+#endif
-+
-+#if defined(ADJ_TAI) && !defined(MOD_TAI)
-+#define MOD_TAI ADJ_TAI
-+#endif
-+
- #ifndef NTP_SYSCALLS_LIBC
- #ifdef NTP_SYSCALLS_STD
- # define ntp_adjtime(t)		syscall(SYS_ntp_adjtime, (t))
package/ntp/ntp-4.2.6_p2-adjtimex.patch new file +33 -0
new file mode 100644
index 0000000..40625fa
@@ -0,0 +1,33 @@
+https://support.ntp.org/bugs/show_bug.cgi?id=769
+http://bugs.gentoo.org/254030
+
+--- ntp/util/tickadj.c
++++ ntp/util/tickadj.c
+@@ -21,7 +21,8 @@
+ # include <unistd.h>
+ #endif /* HAVE_UNISTD_H */
+ 
+-#ifdef HAVE___ADJTIMEX		/* Linux */
++/* proper handling here has been moved to upstream ntp bugzilla */
++#ifdef linux
+ 
+ #include <sys/timex.h>
+ struct timex txc;
+@@ -91,7 +92,7 @@
+ 	}
+ 
+ 	if (!errflg) {
+-		if (__adjtimex(&txc) < 0)
++		if (adjtimex(&txc) < 0)
+ 			perror("adjtimex");
+ 		else if (!quiet)
+ 			printf("tick     = %ld\ntick_adj = %d\n",
+@@ -146,7 +147,7 @@
+ #endif
+ 	}
+     
+-	if (__adjtimex(&txc) < 0)
++	if (adjtimex(&txc) < 0)
+ 	{
+ 		perror("adjtimex");
+ 	}
package/ntp/ntp-optional-ipv6.patch deleted +0 -24
deleted file mode 100644
index 20d6edf..0000000
@@ -1,24 +0,0 @@
-[PATCH] ntpd: fix build without ipv6 support
-
-ntp_io.c was checkin the non-existing DISABLE_IPV6 define rather
-than WANT_IPV6 as defined in config.h, breaking the build if
-the toolchain doesn't have ipv6 support.
-
-Signed-off-by: Peter Korsgaard <[email protected]>
----
- ntpd/ntp_io.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: ntp-4.2.4p5/ntpd/ntp_io.c
-===================================================================
---- ntp-4.2.4p5.orig/ntpd/ntp_io.c
-+++ ntp-4.2.4p5/ntpd/ntp_io.c
-@@ -55,7 +55,7 @@
-  * Set up some macros to look for IPv6 and IPv6 multicast
-  */
- 
--#if defined(ISC_PLATFORM_HAVEIPV6) && !defined(DISABLE_IPV6)
-+#if defined(ISC_PLATFORM_HAVEIPV6) && defined(WANT_IPV6)
- 
- #define INCLUDE_IPV6_SUPPORT
- 
package/ntp/ntp.mk +121 -71

212 lines not on this page · raw message

Signature · 1 line
1.7.2.3
#26 lore raw

PATCH 18/21 ntp: convert to autotargets and bump to 4.2.6p2

Hello !

Quoted 1 line · On Mon, 13 Sep 2010 20:40:45 -0700 Martin Banky <[email protected]> wrote:

+config BR2_PACKAGE_NTP_NTP-KEYGEN

Please don't use the dash character in configuration options. This should be BR2_PACKAGE_NTP_KEYGEN or BR2_PACKAGE_NTP_NTP_KEYGEN.

Quoted 1 line

+NTP_DIR = $(BUILD_DIR)/ntp-$(NTP_VERSION)

Not needed.

Quoted 1 line

+NTP_CAT = $(ZCAT)

Not needed.

package/ntp/ntp.mk line 32

Quoted 5 lines

ifeq ($(BR2_PACKAGE_NTP_SNTP),y)

package/ntp/ntp.mk +3 -0
+define NTP_INSTALL_SNTP
 	install -m 755 $(NTP_DIR)/sntp/sntp $(TARGET_DIR)/usr/bin/sntp
+endef
+endif

Instead of $(NTP_DIR), use $(@D).

Quoted 36 lines
package/ntp/ntp.mk +35 -0
+
+ifeq ($(BR2_PACKAGE_NTP_NTP-KEYGEN),y)
+define NTP_INSTALL_NTP-KEYGEN
+	install -m 755 $(NTP_DIR)/util/ntp-keygen $(TARGET_DIR)/usr/bin/ntp-keygen
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_NTP-WAIT),y)
+define NTP_INSTALL_NTP-WAIT
+	install -m 755 $(NTP_DIR)/scripts/ntp-wait $(TARGET_DIR)/usr/bin/ntp-wait
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_NTPDC),y)
+define NTP_INSTALL_NTPDC
+	install -m 755 $(NTP_DIR)/ntpdc/ntpdc $(TARGET_DIR)/usr/bin/ntpdc
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_NTPQ),y)
+define NTP_INSTALL_NTPQ
+	install -m 755 $(NTP_DIR)/ntpq/ntpq $(TARGET_DIR)/usr/bin/ntpq
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_NTPTRACE),y)
+define NTP_INSTALL_NTPTRACE
+	install -m 755 $(NTP_DIR)/scripts/ntptrace $(TARGET_DIR)/usr/bin/ntptrace
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_TICKADJ),y)
+define NTP_INSTALL_TICKADJ
+	install -m 755 $(NTP_DIR)/util/tickadj $(TARGET_DIR)/usr/bin/tickadj
+endef
 endif

package/ntp/ntp.mk line 78

Quoted 10 lines
package/ntp/ntp.mk +10 -0
+
+define NTP_INSTALL_TARGET_CMDS
+	install -m 755 $(NTP_DIR)/ntpd/ntpd $(TARGET_DIR)/usr/sbin/ntpd
+	$(NTP_INSTALL_SNTP)
+	$(NTP_INSTALL_NTP-KEYGEN)
+	$(NTP_INSTALL_NTP-WAIT)
+	$(NTP_INSTALL_NTPDC)
+	$(NTP_INSTALL_NTPQ)
+	$(NTP_INSTALL_NTPTRACE)
+	$(NTP_INSTALL_TICKADJ)

Humm, you could rewrite this this way:

NTP_INSTALL_BIN_FILES =
ifeq ($(BR2_PACKAGE_NTP_NTP_KEYGEN),y)
NTP_INSTALL_BIN_FILES += util/ntp-keygen
endif
ifeq ($(BR2_PACKAGE_NTP_NTP-WAIT),y)
NTP_INSTALL_BIN_FILES += scripts/ntp-wait
endif
...

and then :

define NTP_INSTALL_TARGET_CMDS

	install -m 755 $(NTP_DIR)/ntpd/ntpd $(TARGET_DIR)/usr/sbin/ntpd
	test -z "$(NTP_INSTALL_BIN_FILES)" || install -m 755 $(addprefix $(@D),$(NTP_INSTALL_BIN_FILES)) $(TARGET_DIR)/usr/bin/

endif

and finally :

define NTP_UNINSTALL_TARGET_CMDS

	rm -f $(addprefix $(TARGET_DIR)/usr/bin/,$(NTP_INSTALL_BIN_FILES))

endif

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#27 lore raw

PATCH 18/21 ntp: convert to autotargets and bump to 4.2.6p2

Thomas,
Thank you for the tips! As you can probably tell, I'm new to writing
makefiles, and have been using the other mk files in buildroot as examples. Not always the best way to pick up the proper format for the buildroot makefiles. Feel free to point out other issues with my mk files in the future. You won't hurt my feelings, and I always appreciate being shown how to do it properly.

Martin

Quoted 104 lines · Thomas Petazzoni

Hello !

Quoted 1 line · On Mon, 13 Sep 2010 20:40:45 -0700 Martin Banky <[email protected]> wrote:

+config BR2_PACKAGE_NTP_NTP-KEYGEN

Please don't use the dash character in configuration options. This should be BR2_PACKAGE_NTP_KEYGEN or BR2_PACKAGE_NTP_NTP_KEYGEN.

Quoted 1 line

+NTP_DIR = $(BUILD_DIR)/ntp-$(NTP_VERSION)

Not needed.

Quoted 1 line

+NTP_CAT = $(ZCAT)

Not needed.

package/ntp/ntp.mk line 32

Quoted 5 lines

ifeq ($(BR2_PACKAGE_NTP_SNTP),y)

package/ntp/ntp.mk +3 -0
+define NTP_INSTALL_SNTP
      install -m 755 $(NTP_DIR)/sntp/sntp $(TARGET_DIR)/usr/bin/sntp
+endef
+endif

Instead of $(NTP_DIR), use $(@D).

package/ntp/ntp.mk

Quoted 4 lines
package/ntp/ntp.mk +4 -0
+
+ifeq ($(BR2_PACKAGE_NTP_NTP-KEYGEN),y)
+define NTP_INSTALL_NTP-KEYGEN
+     install -m 755 $(NTP_DIR)/util/ntp-keygen

$(TARGET_DIR)/usr/bin/ntp-keygen

package/ntp/ntp.mk

Quoted 6 lines
package/ntp/ntp.mk +6 -0
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_NTP-WAIT),y)
+define NTP_INSTALL_NTP-WAIT
+     install -m 755 $(NTP_DIR)/scripts/ntp-wait

$(TARGET_DIR)/usr/bin/ntp-wait

Quoted 8 lines
package/ntp/ntp.mk +8 -0
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_NTPDC),y)
+define NTP_INSTALL_NTPDC
+     install -m 755 $(NTP_DIR)/ntpdc/ntpdc $(TARGET_DIR)/usr/bin/ntpdc
+endef
+endif

package/ntp/ntp.mk

Quoted 10 lines
package/ntp/ntp.mk +10 -0
+
+ifeq ($(BR2_PACKAGE_NTP_NTPQ),y)
+define NTP_INSTALL_NTPQ
+     install -m 755 $(NTP_DIR)/ntpq/ntpq $(TARGET_DIR)/usr/bin/ntpq
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_NTPTRACE),y)
+define NTP_INSTALL_NTPTRACE
+     install -m 755 $(NTP_DIR)/scripts/ntptrace

$(TARGET_DIR)/usr/bin/ntptrace

package/ntp/ntp.mk

Quoted 6 lines
package/ntp/ntp.mk +6 -0
+endef
+endif
+
+ifeq ($(BR2_PACKAGE_NTP_TICKADJ),y)
+define NTP_INSTALL_TICKADJ
+     install -m 755 $(NTP_DIR)/util/tickadj

$(TARGET_DIR)/usr/bin/tickadj

package/ntp/ntp.mk line 78

Quoted 12 lines
package/ntp/ntp.mk +11 -0
+endef
 endif
+
+define NTP_INSTALL_TARGET_CMDS
+     install -m 755 $(NTP_DIR)/ntpd/ntpd $(TARGET_DIR)/usr/sbin/ntpd
+     $(NTP_INSTALL_SNTP)
+     $(NTP_INSTALL_NTP-KEYGEN)
+     $(NTP_INSTALL_NTP-WAIT)
+     $(NTP_INSTALL_NTPDC)
+     $(NTP_INSTALL_NTPQ)
+     $(NTP_INSTALL_NTPTRACE)
+     $(NTP_INSTALL_TICKADJ)

Humm, you could rewrite this this way:

NTP_INSTALL_BIN_FILES =
ifeq ($(BR2_PACKAGE_NTP_NTP_KEYGEN),y)
NTP_INSTALL_BIN_FILES += util/ntp-keygen
endif
ifeq ($(BR2_PACKAGE_NTP_NTP-WAIT),y)
NTP_INSTALL_BIN_FILES += scripts/ntp-wait
endif
...

and then :

define NTP_INSTALL_TARGET_CMDS

       install -m 755 $(NTP_DIR)/ntpd/ntpd $(TARGET_DIR)/usr/sbin/ntpd
       test -z "$(NTP_INSTALL_BIN_FILES)" || install -m 755 $(addprefix

$(@D),$(NTP_INSTALL_BIN_FILES)) $(TARGET_DIR)/usr/bin/ endif

and finally :

define NTP_UNINSTALL_TARGET_CMDS

       rm -f $(addprefix $(TARGET_DIR)/usr/bin/,$(NTP_INSTALL_BIN_FILES))

endif

Regards,

Quoted 11 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100921/89ca7665/attachment-0001.html>

#28 lore raw

PATCH 19/21 openssl: bump to 1.0.0a

In reply to Martin Banky
---
 CHANGES                                            |    2 +-
 .../openssl/openssl-1.0.0a-do-not-build-docs.patch |   13 +++++
 .../openssl-1.0.0a-dont-force-large-file.patch     |   19 +++++++
 package/openssl/openssl-1.0.0a-optional-ipv6.patch |   20 +++++++
 package/openssl/openssl-do-not-build-docs.patch    |   13 -----
 .../openssl/openssl-dont-force-large-file.patch    |   19 -------
 package/openssl/openssl-nofips.patch               |   12 ----
 package/openssl/openssl-optional-ipv6.patch        |   55 --------------------
 package/openssl/openssl-uclibc-susv3-legacy.patch  |   18 ------
 package/openssl/openssl.mk                         |   11 ++--
 10 files changed, 58 insertions(+), 124 deletions(-)
 create mode 100644 package/openssl/openssl-1.0.0a-do-not-build-docs.patch
 create mode 100644 package/openssl/openssl-1.0.0a-dont-force-large-file.patch
 create mode 100644 package/openssl/openssl-1.0.0a-optional-ipv6.patch
 delete mode 100644 package/openssl/openssl-do-not-build-docs.patch
 delete mode 100644 package/openssl/openssl-dont-force-large-file.patch
 delete mode 100644 package/openssl/openssl-nofips.patch
 delete mode 100644 package/openssl/openssl-optional-ipv6.patch
 delete mode 100644 package/openssl/openssl-uclibc-susv3-legacy.patch
CHANGES +1 -1
index e4e185c..5f710b6 100644
@@ -10,7 +10,7 @@
 	Updated/fixed packages: alsa-lib, alsa-utils, autoconf, automake,
 	berkeleydb, bison, busybox, ccache, dropbear, fakeroot, genext2fs,
 	gmp, iptables, kismet, libdeamon, libelf, libogg, libvorbis, make,
-	module-init-tools, mpfr, nano, ntp, openvpn, qt, usbutils
+	module-init-tools, mpfr, nano, ntp, openssl, openvpn, qt, usbutils
 
 	Removed packages: dillo, libglib12, libgtk12, microwin, pcmcia
 
package/openssl/openssl-1.0.0a-do-not-build-docs.patch new file +13 -0
new file mode 100644
index 0000000..329efbe
@@ -0,0 +1,13 @@
+Dont waste time building manpages if we're not going to use em.
+
+--- openssl/Makefile.org
++++ openssl/Makefile.org
+@@ -492,7 +492,7 @@
+ dist_pem_h:
+ 	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
+ 
+-install: all install_docs install_sw
++install: all install_sw
+ 
+ install_sw:
+ 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
package/openssl/openssl-1.0.0a-dont-force-large-file.patch new file +19 -0
new file mode 100644
index 0000000..5b04656
@@ -0,0 +1,19 @@
+[patch]: bss_file.c: don't force largefile mode
+---
+ crypto/bio/bss_file.c |    3 ---
+ 1 file changed, 3 deletions(-)
+
+Index: openssl-0.9.8g/crypto/bio/bss_file.c
+===================================================================
+--- openssl-0.9.8g.orig/crypto/bio/bss_file.c
++++ openssl-0.9.8g/crypto/bio/bss_file.c
+@@ -78,9 +78,6 @@
+  * sequential access of large files without extra "magic" comprise *BSD,
+  * Darwin, IRIX...
+  */
+-#ifndef _FILE_OFFSET_BITS
+-#define _FILE_OFFSET_BITS 64
+-#endif
+ #endif
+ 
+ #include <stdio.h>
package/openssl/openssl-1.0.0a-optional-ipv6.patch new file +20 -0
new file mode 100644
index 0000000..667d00f
@@ -0,0 +1,20 @@
+[PATCH] openssl: fix build without IPv6 support
+
+Signed-off-by: Peter Korsgaard <[email protected]>
+---
+ crypto/bio/bss_dgram.c |   10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+Index: openssl-0.9.8n/crypto/bio/bss_dgram.c
+===================================================================
+--- openssl-0.9.8n.orig/crypto/bio/bss_dgram.c
++++ openssl-0.9.8n/crypto/bio/bss_dgram.c
+@@ -61,6 +61,8 @@
+ 
+ #include <stdio.h>
+ #include <errno.h>
++#include <features.h>
++
+ #define USE_SOCKETS
+ #include "cryptlib.h"
+ 
package/openssl/openssl-do-not-build-docs.patch deleted +0 -13
deleted file mode 100644
index 135a9d3..0000000
@@ -1,13 +0,0 @@
-Dont waste time building manpages if we're not going to use em.
-
---- openssl/Makefile.org
-+++ openssl/Makefile.org
-@@ -792,7 +792,7 @@
- dist_pem_h:
- 	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
- 
--install: all install_docs install_sw
-+install: all install_sw
- 
- install_sw:
- 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
package/openssl/openssl-dont-force-large-file.patch deleted +0 -19
deleted file mode 100644
index 5b04656..0000000
@@ -1,19 +0,0 @@
-[patch]: bss_file.c: don't force largefile mode
----
- crypto/bio/bss_file.c |    3 ---
- 1 file changed, 3 deletions(-)
-
-Index: openssl-0.9.8g/crypto/bio/bss_file.c
-===================================================================
---- openssl-0.9.8g.orig/crypto/bio/bss_file.c
-+++ openssl-0.9.8g/crypto/bio/bss_file.c
-@@ -78,9 +78,6 @@
-  * sequential access of large files without extra "magic" comprise *BSD,
-  * Darwin, IRIX...
-  */
--#ifndef _FILE_OFFSET_BITS
--#define _FILE_OFFSET_BITS 64
--#endif
- #endif
- 
- #include <stdio.h>
package/openssl/openssl-nofips.patch deleted +0 -12
deleted file mode 100644
index 0edea3e..0000000
@@ -1,12 +0,0 @@
-diff -Nura openssl-0.9.8k/Makefile.org openssl-0.9.8k.nofips/Makefile.org
---- openssl-0.9.8k/Makefile.org	2009-03-03 20:40:29.000000000 -0200
-+++ openssl-0.9.8k.nofips/Makefile.org	2009-03-26 09:50:27.000000000 -0300
-@@ -131,7 +131,7 @@
- 
- BASEADDR=
- 
--DIRS=   crypto fips ssl engines apps test tools
-+DIRS=   crypto ssl engines apps test tools
- SHLIBDIRS= crypto ssl fips
- 
- # dirs in crypto to build
package/openssl/openssl-optional-ipv6.patch deleted +0 -55

55 lines not on this page · raw message

package/openssl/openssl-uclibc-susv3-legacy.patch deleted +0 -18
deleted file mode 100644
index eb1d277..0000000
@@ -1,18 +0,0 @@
-sys/timeb.h / ftime are legacy, so don't enable them for uClibc 
----
- apps/speed.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: openssl-0.9.8g/apps/speed.c
-===================================================================
---- openssl-0.9.8g.orig/apps/speed.c
-+++ openssl-0.9.8g/apps/speed.c
-@@ -113,7 +113,7 @@
- #elif !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
- # define TIMES
- #endif
--#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(OPENSSL_SYS_MPE) && !defined(__NetBSD__) && !defined(OPENSSL_SYS_VXWORKS) /* FIXME */
-+#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(OPENSSL_SYS_MPE) && !defined(__NetBSD__) && !defined(OPENSSL_SYS_VXWORKS) && !defined(__UCLIBC__) /* FIXME */
- # define TIMEB
- #endif
- 
package/openssl/openssl.mk +5 -6
index edbfe8b..ebf4fb1 100644
@@ -3,7 +3,8 @@
 # openssl
 #
 #############################################################
-OPENSSL_VERSION:=0.9.8o
+OPENSSL_VERSION:=1.0.0a
+OPENSSL_SOURCE = openssl-$(OPENSSL_VERSION).tar.gz
 OPENSSL_SITE:=http://www.openssl.org/source
 OPENSSL_INSTALL_STAGING = YES
 OPENSSL_DEPENDENCIES = zlib
@@ -32,10 +33,8 @@ define OPENSSL_CONFIGURE_CMDS
 			threads \
 			shared \
 			no-idea \
+			no-mdc2 \
 			no-rc5 \
-			enable-camellia \
-			enable-mdc2 \
-			enable-tlsext \
 			zlib-dynamic \
 	)
 	$(SED) "s:-march=[-a-z0-9] ::" -e "s:-mcpu=[-a-z0-9] ::g" $(@D)/Makefile
@@ -43,8 +42,8 @@ define OPENSSL_CONFIGURE_CMDS
 endef
 
 define OPENSSL_BUILD_CMDS
-	$(MAKE1) -C $(@D) all build-shared
-	$(MAKE1) -C $(@D) do_linux-shared
+	$(MAKE1) CC="$(TARGET_CC)" -C $(@D) all build-shared
+	$(MAKE1) CC="$(TARGET_CC)" -C $(@D) do_linux-shared
 endef
 
 define OPENSSL_INSTALL_STAGING_CMDS
Signature · 1 line
1.7.2.3
#29 lore raw

PATCH 20/21 BugFix - Bison - Fixed Missing stddef.h Include In wchar.h

In reply to Martin Banky

When uClibc is configured without wchar support, wchar_t define is missing. When configure runs it includes stddef.h, but when the build runs it does not.

---
 package/bison/bison-no-wchar/bison-no-wchar.patch |   13 +++++++++++++
 package/bison/bison.mk                            |    9 +++++++++
 2 files changed, 22 insertions(+), 0 deletions(-)
 create mode 100644 package/bison/bison-no-wchar/bison-no-wchar.patch
package/bison/bison-no-wchar/bison-no-wchar.patch new file +13 -0
new file mode 100644
index 0000000..6888ecf
@@ -0,0 +1,13 @@
+--- bison-2.4.3/lib/wchar.in.h	2010-09-09 23:14:49.000000000 -0700
++++ bison-2.4.3.no.wchar/lib/wchar.in.h	2010-09-09 22:07:49.000000000 -0700
+@@ -72,6 +72,10 @@
+ # @INCLUDE_NEXT@ @NEXT_WCHAR_H@
+ #endif
+ 
++#ifdef __UCLIBC__
++# include <stddef.h>
++#endif
++
+ #undef _GL_ALREADY_INCLUDING_WCHAR_H
+ 
+ #ifndef _GL_WCHAR_H
package/bison/bison.mk +9 -0
index 075a078..64304a5 100644
@@ -6,11 +6,20 @@
 BISON_VERSION:=2.4.3
 BISON_SOURCE:=bison-$(BISON_VERSION).tar.bz2
 BISON_SITE:=$(BR2_GNU_MIRROR)/bison
+BISON_DIR:=$(BUILD_DIR)/bison-$(BISON_VERSION)
 
 define BISON_DISABLE_EXAMPLES
 	echo 'all install:' > $(@D)/examples/Makefile
 endef
 
+define BISON_NO_WCHAR_SUPPORT
+	toolchain/patch-kernel.sh $(BISON_DIR) package/bison/bison-no-wchar/ \*.patch
+endef
+
+ifneq ($(BR2_USE_WCHAR),y)
+BISON_POST_CONFIGURE_HOOKS += BISON_NO_WCHAR_SUPPORT
+endif
+
 BISON_POST_CONFIGURE_HOOKS += BISON_DISABLE_EXAMPLES
 
 $(eval $(call AUTOTARGETS,package,bison))
Signature · 1 line
1.7.2.3
#30 lore raw

PATCH 20/21 BugFix - Bison - Fixed Missing stddef.h Include In wchar.h

Hello Martin,

Thanks for your patchset !

Quoted 1 line · On Mon, 13 Sep 2010 20:40:47 -0700 Martin Banky <[email protected]> wrote:

+BISON_DIR:=$(BUILD_DIR)/bison-$(BISON_VERSION)

This is not needed and shouldn't be there.

package/bison/bison.mk line 21

Quoted 11 lines

define BISON_DISABLE_EXAMPLES

package/bison/bison.mk +7 -0
 	echo 'all install:' > $(@D)/examples/Makefile
 endef
 
+define BISON_NO_WCHAR_SUPPORT
+	toolchain/patch-kernel.sh $(BISON_DIR) package/bison/bison-no-wchar/ \*.patch
+endef
+
+ifneq ($(BR2_USE_WCHAR),y)
+BISON_POST_CONFIGURE_HOOKS += BISON_NO_WCHAR_SUPPORT
+endif

Personally, I'd prefer not to have patches applied conditionally. It's the patch itself that should do the right thing depending on whether wchar support is available or not, so that the patch can eventually be sent to the upstream project.

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#31 lore raw

PATCH 20/21 BugFix - Bison - Fixed Missing stddef.h Include In wchar.h

Thomas,
I'll work on making the changes a little later. I'm in the middle of a
test build for some changes that I'm making in other areas.

Martin

Quoted 31 lines · Thomas Petazzoni

Hello Martin,

Thanks for your patchset !

Quoted 1 line · On Mon, 13 Sep 2010 20:40:47 -0700 Martin Banky <[email protected]> wrote:

+BISON_DIR:=$(BUILD_DIR)/bison-$(BISON_VERSION)

This is not needed and shouldn't be there.

Review

Quoted 6 lines

define BISON_DISABLE_EXAMPLES

      echo 'all install:' > $(@D)/examples/Makefile

endef

(quoted diff) +2 -0
+define BISON_NO_WCHAR_SUPPORT
+     toolchain/patch-kernel.sh $(BISON_DIR)

package/bison/bison-no-wchar/ \*.patch

package/bison/bison.mk line 21

Quoted 5 lines
package/bison/bison.mk +5 -0
+endef
+
+ifneq ($(BR2_USE_WCHAR),y)
+BISON_POST_CONFIGURE_HOOKS += BISON_NO_WCHAR_SUPPORT
+endif

Personally, I'd prefer not to have patches applied conditionally. It's the patch itself that should do the right thing depending on whether wchar support is available or not, so that the patch can eventually be sent to the upstream project.

Thanks!

Quoted 11 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100914/6650808a/attachment.html>

#32 lore raw

PATCH 21/21 BugFix - m4 - Fixed Missing wint_t typedef When There Is No WChar Support

In reply to Martin Banky
---
 package/m4/m4-no-wchar/m4-no-wchar.patch |   20 ++++++++++++++++++++
 package/m4/m4.mk                         |    6 ++++++
 2 files changed, 26 insertions(+), 0 deletions(-)
 create mode 100644 package/m4/m4-no-wchar/m4-no-wchar.patch
package/m4/m4-no-wchar/m4-no-wchar.patch new file +20 -0
new file mode 100644
index 0000000..751d228
@@ -0,0 +1,20 @@
+--- m4-1.4.9/lib/printf-args.h	2010-09-09 23:14:49.000000000 -0700
++++ m4-1.4.9.no.wchar/lib/printf-args.h	2010-09-09 19:09:09.000000000 -0700
+@@ -29,6 +29,7 @@
+ /* Get wint_t.  */
+ #if HAVE_WINT_T
+ # include <wchar.h>
++typedef unsigned int wint_t;
+ #endif
+ 
+ /* Get va_list.  */
+--- m4-1.4.9/lib/wctype_.h	2010-09-09 23:14:49.000000000 -0700
++++ m4-1.4.9.no.wchar/lib/wctype_.h	2010-09-09 19:09:09.000000000 -0700
+@@ -39,6 +39,7 @@
+ # include <stdio.h>
+ # include <time.h>
+ # include <wchar.h>
++typedef unsigned int wint_t;
+ typedef wint_t __wctype_wint_t;
+ #else
+ typedef int __wctype_wint_t;
package/m4/m4.mk +6 -0
index a0b56c4..7392e9d 100644
@@ -6,6 +6,11 @@
 M4_VERSION = 1.4.9
 M4_SOURCE = m4-$(M4_VERSION).tar.bz2
 M4_SITE = $(BR2_GNU_MIRROR)/m4
+M4_DIR = $(BUILD_DIR)/m4-$(M4_VERSION)
+
+define M4_NO_WCHAR_SUPPORT
+	toolchain/patch-kernel.sh $(M4_DIR) package/m4/m4-no-wchar/ \*.patch
+endef
 
 ifeq ($(BR2_ENABLE_DEBUG),y) # no install-exec
 M4_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install
@@ -15,6 +20,7 @@ M4_CONF_ENV = gl_cv_func_gettimeofday_clobber=no
 
 ifneq ($(BR2_USE_WCHAR),y)
 M4_CONF_ENV += gt_cv_c_wchar_t=no gl_cv_absolute_wchar_h=__fpending.h
+M4_POST_CONFIGURE_HOOKS += M4_NO_WCHAR_SUPPORT
 endif
 
 HOST_M4_CONF_OPT = --disable-static
Signature · 1 line
1.7.2.3
#33 lore raw

PATCH 21/21 BugFix - m4 - Fixed Missing wint_t typedef When There Is No WChar Support

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Martin" == Martin Banky <[email protected]> writes:

Martin> Signed-off-by: Martin Banky <[email protected]>

Thanks, but I find this too hackish. M4 is not a package typically needed on really small systems, so just depending on WCHAR is cleaner imho.

Signature · 1 line
Bye, Peter Korsgaard
#34 lore raw

PATCH 21/21 BugFix - m4 - Fixed Missing wint_t typedef When There Is No WChar Support

Peter,
Not a problem, I just thought I would share my fixes for the type of
system that I'm building. I'm trying to build a target compiler system, because I have some very complicated builds that I have to do. I have a very tweaked build of Qt that is hard enough to do in a native environment, let alone in buildroot. I also have software that I'm developing(at last count about 15 packages), that would be too much work to convert to buildroot. For me, it is just easier to have a native compiler to do these things. Also, I have not had a chance to test the latest version of m4, so maybe that will fix things. I'll let you know, it's on my todo list.

Martin

Quoted 11 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Martin" == Martin Banky <[email protected]> writes:

Martin> Signed-off-by: Martin Banky <[email protected]>

Thanks, but I find this too hackish. M4 is not a package typically needed on really small systems, so just depending on WCHAR is cleaner imho.

--
Bye, Peter Korsgaard

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100919/e7dcc064/attachment-0001.html>

#35 lore raw

PATCH 1/21 alsa-lib: bump to 1.0.23

In reply to Martin Banky

Hello Martin,

Quoted 1 line · On Mon, 13 Sep 2010 20:40:28 -0700 Martin Banky <[email protected]> wrote:

Please don't make any change to the CHANGES file. Those changes are causing all sort of unnecessary conflicts. Only Peter, Buildroot maintainer, does the updates to this file.

Could you repost your patch set with all those changes removed ?

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#36 lore raw

PATCH 1/21 alsa-lib: bump to 1.0.23

Thomas,
Yes, I kind of figured that out after I started doing some pulls, and
got conflicts regarding the CHANGES file. I'll repost the patch set with the changes that you asked for.

Martin

Quoted 15 lines · Thomas Petazzoni

Hello Martin,

Quoted 1 line · On Mon, 13 Sep 2010 20:40:28 -0700 Martin Banky <[email protected]> wrote:

Please don't make any change to the CHANGES file. Those changes are causing all sort of unnecessary conflicts. Only Peter, Buildroot maintainer, does the updates to this file.

Could you repost your patch set with all those changes removed ?

Thanks,

Quoted 11 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100918/6fbf1872/attachment.html>