ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
Subsystems (3)
PATCH 1/1 ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
The PL310 on the ct-ca9x4 tile for the Versatile Express does not need to add additional latency when accessing memory. Unfortunately, the boot monitor sets this up for an 8-cycle delay on reads and writes, resulting in restricted access to the bus for devices accessing memory via uncached mappings. A symptom of this problem is display corruption when the CLCD controller cannot read the framebuffer quickly enough to display at a sensible refresh rate due to traffic from the cache controller locking the bus.
This patch sets the L2 RAM latencies to the correct value of 1 cycle on the ct-ca9x4 tile before enabling the L2 cache.
---
Note that this conflicts with patch 6395/1 but I can resolve the trivial conflict when submitting to the patch system.
arch/arm/mach-vexpress/ct-ca9x4.c | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-)
arch/arm/mach-vexpress/ct-ca9x4.c +7 -1
@@ -227,7 +227,13 @@ static void ct_ca9x4_init(void)int i;#ifdef CONFIG_CACHE_L2X0 -l2x0_init (MMIO_P2V (CT_CA9X4_L2CC ),0x00000000 ,0xfe0fffff ); +void __iomem *l2x0_base =MMIO_P2V (CT_CA9X4_L2CC ); + +/* set RAM latencies to 1 cycle for this core tile. */ +writel (0 , l2x0_base +L2X0_TAG_LATENCY_CTRL ); +writel (0 , l2x0_base +L2X0_DATA_LATENCY_CTRL ); + +l2x0_init (l2x0_base,0x00000000 ,0xfe0fffff );#endif clkdev_add_table (lookups,ARRAY_SIZE (lookups));
Signature · 1 line
1.7.0.4