Skip to contentSkip to conversation

Change the for loop to read blutooth clock in MCAP CSP

PATCH In review Santiago Carot-Nemesio 3 participants 3 messages Sep 17, 2010 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Change the for loop to read blutooth clock in MCAP CSP

This is only a cosmetic change. Using a do..while loop we avoid direct manipulation of counter loop variable when error happens reading the BT clock.

---
 health/mcap_sync.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)
health/mcap_sync.c +5 -5
index bc1ffcd..78cb163 100644
@@ -406,18 +406,18 @@ static void initialize_caps(struct mcap_mcl *mcl)
 
 	/* Do clock read a number of times and measure latency */
 	avg = 0;
-	for (i = 0; i < 20; ++i) {
+	i = 0;
+	do {
 		clock_gettime(CLK, &t1);
-		if (!read_btclock(mcl, &btclock, &btaccuracy)) {
-			--i;
+		if (!read_btclock(mcl, &btclock, &btaccuracy))
 			continue;
-		}
 		clock_gettime(CLK, &t2);
 
 		latency = time_us(&t2) - time_us(&t1);
 		latencies[i] = latency;
 		avg += latency;
-	}
+		i++;
+	} while (i < 20);
 	avg /= 20;
 
 	/* Calculate deviation */
Signature · 1 line
1.7.2.3
#1 lore raw
Quoted 37 lines · Santiago Carot-Nemesio

This is only a cosmetic change. Using a do..while loop we avoid direct manipulation of counter loop variable when error happens reading the BT clock.
---
health/mcap_sync.c | 10 +++++-----

1 files changed, 5 insertions(+), 5 deletions(-)
health/mcap_sync.c +5 -5
index bc1ffcd..78cb163 100644
@@ -406,18 +406,18 @@ static void initialize_caps(struct mcap_mcl *mcl)
 
 	/* Do clock read a number of times and measure latency */
 	avg = 0;
-	for (i = 0; i < 20; ++i) {
+	i = 0;
+	do {
 		clock_gettime(CLK, &t1);
-		if (!read_btclock(mcl, &btclock, &btaccuracy)) {
-			--i;
+		if (!read_btclock(mcl, &btclock, &btaccuracy))
 			continue;
-		}
 		clock_gettime(CLK, &t2);
 
 		latency = time_us(&t2) - time_us(&t1);
 		latencies[i] = latency;
 		avg += latency;
-	}
+		i++;
+	} while (i < 20);
 	avg /= 20;
 
 	/* Calculate deviation */
Signature · 1 line
1.7.2.3

Looking again now, this (the logic, not the patch) may lead to an infinite loop, if for some reason the clock simply can't be read. One more thing to be fixed.

#2 lore raw

Hi Elvis,

Quoted 36 lines · Elvis Pfützenreuter
Quoted 34 lines · Santiago Carot-Nemesio

This is only a cosmetic change. Using a do..while loop we avoid direct manipulation of counter loop variable when error happens reading the BT clock.
---
health/mcap_sync.c | 10 +++++-----

1 files changed, 5 insertions(+), 5 deletions(-)
health/mcap_sync.c +5 -5
index bc1ffcd..78cb163 100644
@@ -406,18 +406,18 @@ static void initialize_caps(struct mcap_mcl *mcl)
 
 	/* Do clock read a number of times and measure latency */
 	avg = 0;
-	for (i = 0; i<  20; ++i) {
+	i = 0;
+	do {
 		clock_gettime(CLK,&t1);
-		if (!read_btclock(mcl,&btclock,&btaccuracy)) {
-			--i;
+		if (!read_btclock(mcl,&btclock,&btaccuracy))
 			continue;
-		}
 		clock_gettime(CLK,&t2);
 
 		latency = time_us(&t2) - time_us(&t1);
 		latencies[i] = latency;
 		avg += latency;
-	}
+		i++;
+	} while (i<  20);
 	avg /= 20;
 
Quoted 5 lines
Quoted 3 lines
health/mcap_sync.c +0 -1
 	/* Calculate deviation */
--

1.7.2.3

Looking again now, this (the logic, not the patch) may lead to an infinite loop, if for some reason the clock simply can't be read. One more thing to be fixed.--

Yes, you are rigth, I saw it too but I was waiting to speak with you. It may be better set a maximum number of attempts and return a CSP error code if it is not possible synchronize with remote device.

For now I think that this patch looks better than use a for loop here :P