2.6.32.22-stable review

@@ -143,6 +143,37 @@ static struct pci_device_id k8temp_ids[]
 
 MODULE_DEVICE_TABLE(pci, k8temp_ids);
 
+static int __devinit is_rev_g_desktop(u8 model)
+{
+	u32 brandidx;
+
+	if (model < 0x69)
+		return 0;
+
+	if (model == 0xc1 || model == 0x6c || model == 0x7c)
+		return 0;
+
+	/*
+	 * Differentiate between AM2 and ASB1.
+	 * See "Constructing the processor Name String" in "Revision
+	 * Guide for AMD NPT Family 0Fh Processors" (33610).
+	 */
+	brandidx = cpuid_ebx(0x80000001);
+	brandidx = (brandidx >> 9) & 0x1f;
+
+	/* Single core */
+	if ((model == 0x6f || model == 0x7f) &&
+	    (brandidx == 0x7 || brandidx == 0x9 || brandidx == 0xc))
+		return 0;
+
+	/* Dual core */
+	if (model == 0x6b &&
+	    (brandidx == 0xb || brandidx == 0xc))
+		return 0;
+
+	return 1;
+}
+
 static int __devinit k8temp_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {

@@ -179,9 +210,7 @@ static int __devinit k8temp_probe(struct
 				 "wrong - check erratum #141\n");
 		}
 
-		if ((model >= 0x69) &&
-		    !(model == 0xc1 || model == 0x6c || model == 0x7c ||
-		      model == 0x6b || model == 0x6f || model == 0x7f)) {
+		if (is_rev_g_desktop(model)) {
 			/*
 			 * RevG desktop CPUs (i.e. no socket S1G1 or
 			 * ASB1 parts) need additional offset,

@@ -362,7 +362,7 @@ int bind_evtchn_to_irq(unsigned int evtc
 		irq = find_unbound_irq();
 
 		set_irq_chip_and_handler_name(irq, &xen_dynamic_chip,
-					      handle_level_irq, "event");
+					      handle_edge_irq, "event");
 
 		evtchn_to_irq[evtchn] = irq;
 		irq_info[irq] = mk_evtchn_info(evtchn);

@@ -106,6 +106,7 @@ static inline unsigned long *cpu_evtchn_
 #define VALID_EVTCHN(chn)	((chn) != 0)
 
 static struct irq_chip xen_dynamic_chip;
+static struct irq_chip xen_percpu_chip;
 
 /* Constructor for packed IRQ information. */
 static struct irq_info mk_unbound_info(void)

@@ -388,8 +389,8 @@ static int bind_ipi_to_irq(unsigned int
 		if (irq < 0)
 			goto out;
 
-		set_irq_chip_and_handler_name(irq, &xen_dynamic_chip,
-					      handle_level_irq, "ipi");
+		set_irq_chip_and_handler_name(irq, &xen_percpu_chip,
+					      handle_percpu_irq, "ipi");
 
 		bind_ipi.vcpu = cpu;
 		if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi,

@@ -429,8 +430,8 @@ static int bind_virq_to_irq(unsigned int
 
 		irq = find_unbound_irq();
 
-		set_irq_chip_and_handler_name(irq, &xen_dynamic_chip,
-					      handle_level_irq, "virq");
+		set_irq_chip_and_handler_name(irq, &xen_percpu_chip,
+					      handle_percpu_irq, "virq");
 
 		evtchn_to_irq[evtchn] = irq;
 		irq_info[irq] = mk_virq_info(evtchn, virq);

@@ -929,6 +930,16 @@ static struct irq_chip xen_dynamic_chip
 	.retrigger	= retrigger_dynirq,
 };
 
+static struct irq_chip en_percpu_chip __read_mostly = {
+	.name		= "xen-percpu",
+
+	.disable	= disable_dynirq,
+	.mask		= disable_dynirq,
+	.unmask		= enable_dynirq,
+
+	.ack		= ack_dynirq,
+};
+
 void __init xen_init_IRQ(void)
 {
 	int i;

@@ -6589,7 +6589,7 @@ static struct hda_input_mux alc883_lenov
 	.num_items = 4,
 	.items = {
 		{ "Mic", 0x0 },
-		{ "iMic", 0x1 },
+		{ "Int Mic", 0x1 },
 		{ "Line", 0x2 },
 		{ "CD", 0x4 },
 	},

@@ -8038,8 +8038,8 @@ static struct snd_kcontrol_new alc883_le
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
 	{ } /* end */
 };
 

@@ -1879,19 +1879,25 @@ static void mv_bmdma_start(struct ata_qu
  *	LOCKING:
  *	Inherited from caller.
  */
-static void mv_bmdma_stop(struct ata_queued_cmd *qc)
+static void mv_bmdma_stop_ap(struct ata_port *ap)
 {
-	struct ata_port *ap = qc->ap;
 	void __iomem *port_mmio = mv_ap_base(ap);
 	u32 cmd;
 
 	/* clear start/stop bit */
 	cmd = readl(port_mmio + BMDMA_CMD);
-	cmd &= ~ATA_DMA_START;
-	writelfl(cmd, port_mmio + BMDMA_CMD);
+	if (cmd & ATA_DMA_START) {
+		cmd &= ~ATA_DMA_START;
+		writelfl(cmd, port_mmio + BMDMA_CMD);
 
-	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_sff_dma_pause(ap);
+		/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+		ata_sff_dma_pause(ap);
+	}
+}
+
+static void mv_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	mv_bmdma_stop_ap(qc->ap);
 }
 
 /**

@@ -1915,8 +1921,21 @@ static u8 mv_bmdma_status(struct ata_por
 	reg = readl(port_mmio + BMDMA_STATUS);
 	if (reg & ATA_DMA_ACTIVE)
 		status = ATA_DMA_ACTIVE;
-	else
+	else if (reg & ATA_DMA_ERR)
 		status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR;
+	else {
+		/*
+		 * Just because DMA_ACTIVE is 0 (DMA completed),
+		 * this does _not_ mean the device is "done".
+		 * So we should not yet be signalling ATA_DMA_INTR
+		 * in some cases.  Eg. DSM/TRIM, and perhaps others.
+		 */
+		mv_bmdma_stop_ap(ap);
+		if (ioread8(ap->ioaddr.altstatus_addr) & ATA_BUSY)
+			status = 0;
+		else
+			status = ATA_DMA_INTR;
+	}
 	return status;
 }
 

@@ -1976,6 +1995,9 @@ static void mv_qc_prep(struct ata_queued
 
 	switch (tf->protocol) {
 	case ATA_PROT_DMA:
+		if (tf->command == ATA_CMD_DSM)
+			return;
+		/* fall-thru */
 	case ATA_PROT_NCQ:
 		break;	/* continue below */
 	case ATA_PROT_PIO:

@@ -2075,6 +2097,8 @@ static void mv_qc_prep_iie(struct ata_qu
 	if ((tf->protocol != ATA_PROT_DMA) &&
 	    (tf->protocol != ATA_PROT_NCQ))
 		return;
+	if (tf->command == ATA_CMD_DSM)
+		return;  /* use bmdma for this */
 
 	/* Fill in Gen IIE command request block */
 	if (!(tf->flags & ATA_TFLAG_WRITE))

@@ -2270,6 +2294,12 @@ static unsigned int mv_qc_issue(struct a
 
 	switch (qc->tf.protocol) {
 	case ATA_PROT_DMA:
+		if (qc->tf.command == ATA_CMD_DSM) {
+			if (!ap->ops->bmdma_setup)  /* no bmdma on GEN_I */
+				return AC_ERR_OTHER;
+			break;  /* use bmdma for this */
+		}
+		/* fall thru */
 	case ATA_PROT_NCQ:
 		mv_start_edma(ap, port_mmio, pp, qc->tf.protocol);
 		pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;

@@ -59,5 +59,7 @@ extern void check_tsc_sync_source(int cp
 extern void check_tsc_sync_target(void);
 
 extern int notsc_setup(char *);
+extern void save_sched_clock_state(void);
+extern void restore_sched_clock_state(void);
 
 #endif /* _ASM_X86_TSC_H */

@@ -626,6 +626,44 @@ static void set_cyc2ns_scale(unsigned lo
 	local_irq_restore(flags);
 }
 
+static unsigned long long cyc2ns_suspend;
+
+void save_sched_clock_state(void)
+{
+	if (!sched_clock_stable)
+		return;
+
+	cyc2ns_suspend = sched_clock();
+}
+
+/*
+ * Even on processors with invariant TSC, TSC gets reset in some the
+ * ACPI system sleep states. And in some systems BIOS seem to reinit TSC to
+ * arbitrary value (still sync'd across cpu's) during resume from such sleep
+ * states. To cope up with this, recompute the cyc2ns_offset for each cpu so
+ * that sched_clock() continues from the point where it was left off during
+ * suspend.
+ */
+void restore_sched_clock_state(void)
+{
+	unsigned long long offset;
+	unsigned long flags;
+	int cpu;
+
+	if (!sched_clock_stable)
+		return;
+
+	local_irq_save(flags);
+
+	get_cpu_var(cyc2ns_offset) = 0;
+	offset = cyc2ns_suspend - sched_clock();
+
+	for_each_possible_cpu(cpu)
+		per_cpu(cyc2ns_offset, cpu) = offset;
+
+	local_irq_restore(flags);
+}
+
 #ifdef CONFIG_CPU_FREQ
 
 /* Frequency scaling support. Adjust the TSC based timer when the cpu frequency

@@ -112,6 +112,7 @@ static void __save_processor_state(struc
 void save_processor_state(void)
 {
 	__save_processor_state(&saved_context);
+	save_sched_clock_state();
 }
 #ifdef CONFIG_X86_32
 EXPORT_SYMBOL(save_processor_state);

@@ -253,6 +254,7 @@ static void __restore_processor_state(st
 void restore_processor_state(void)
 {
 	__restore_processor_state(&saved_context);
+	restore_sched_clock_state();
 }
 #ifdef CONFIG_X86_32
 EXPORT_SYMBOL(restore_processor_state);

@@ -195,30 +195,15 @@ void unmask_msi_irq(unsigned int irq)
 void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg)
 {
 	struct msi_desc *entry = get_irq_desc_msi(desc);
-	if (entry->msi_attrib.is_msix) {
-		void __iomem *base = entry->mask_base +
-			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
 
-		msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
-		msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
-		msg->data = readl(base + PCI_MSIX_ENTRY_DATA);
-	} else {
-		struct pci_dev *dev = entry->dev;
-		int pos = entry->msi_attrib.pos;
-		u16 data;
-
-		pci_read_config_dword(dev, msi_lower_address_reg(pos),
-					&msg->address_lo);
-		if (entry->msi_attrib.is_64) {
-			pci_read_config_dword(dev, msi_upper_address_reg(pos),
-						&msg->address_hi);
-			pci_read_config_word(dev, msi_data_reg(pos, 1), &data);
-		} else {
-			msg->address_hi = 0;
-			pci_read_config_word(dev, msi_data_reg(pos, 0), &data);
-		}
-		msg->data = data;
-	}
+	/* We do not touch the hardware (which may not even be
+	 * accessible at the moment) but return the last message
+	 * written.  Assert that this is valid, assuming that
+	 * valid messages are not all-zeroes. */
+	BUG_ON(!(entry->msg.address_hi | entry->msg.address_lo |
+		 entry->msg.data));
+
+	*msg = entry->msg;
 }
 
 void read_msi_msg(unsigned int irq, struct msi_msg *msg)

@@ -231,7 +216,10 @@ void read_msi_msg(unsigned int irq, stru
 void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg)
 {
 	struct msi_desc *entry = get_irq_desc_msi(desc);
-	if (entry->msi_attrib.is_msix) {
+
+	if (entry->dev->current_state != PCI_D0) {
+		/* Don't touch the hardware now */
+	} else if (entry->msi_attrib.is_msix) {
 		void __iomem *base;
 		base = entry->mask_base +
 			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;

@@ -25,7 +25,7 @@ static int ia64_set_msi_irq_affinity(uns
 	if (irq_prepare_move(irq, cpu))
 		return -1;
 
-	read_msi_msg(irq, &msg);
+	get_cached_msi_msg(irq, &msg);
 
 	addr = msg.address_lo;
 	addr &= MSI_ADDR_DEST_ID_MASK;

@@ -174,7 +174,7 @@ static int sn_set_msi_irq_affinity(unsig
 	 * Release XIO resources for the old MSI PCI address
 	 */
 
-	read_msi_msg(irq, &msg);
+	get_cached_msi_msg(irq, &msg);
         sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
 	pdev = sn_pdev->pdi_linux_pcidev;
 	provider = SN_PCIDEV_BUSPROVIDER(pdev);

@@ -3338,7 +3338,7 @@ static int set_msi_irq_affinity(unsigned
 
 	cfg = desc->chip_data;
 
-	read_msi_msg_desc(desc, &msg);
+	get_cached_msi_msg_desc(desc, &msg);
 
 	msg.data &= ~MSI_DATA_VECTOR_MASK;
 	msg.data |= MSI_DATA_VECTOR(cfg->vector);

62 lines not on this page · raw message

@@ -14,8 +14,10 @@ struct irq_desc;
 extern void mask_msi_irq(unsigned int irq);
 extern void unmask_msi_irq(unsigned int irq);
 extern void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg);
+extern void get_cached_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg);
 extern void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg);
 extern void read_msi_msg(unsigned int irq, struct msi_msg *msg);
+extern void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
 extern void write_msi_msg(unsigned int irq, struct msi_msg *msg);
 
 struct msi_desc {

@@ -7752,14 +7752,24 @@ migration_call(struct notifier_block *nf
 		cpu_rq(cpu)->migration_thread = NULL;
 		break;
 
+	case CPU_POST_DEAD:
+		/*
+		 * Bring the migration thread down in CPU_POST_DEAD event,
+		 * since the timers should have got migrated by now and thus
+		 * we should not see a deadlock between trying to kill the
+		 * migration thread and the sched_rt_period_timer.
+		 */
+		rq = cpu_rq(cpu);
+		kthread_stop(rq->migration_thread);
+		put_task_struct(rq->migration_thread);
+		rq->migration_thread = NULL;
+		break;
+
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		cpuset_lock(); /* around calls to cpuset_cpus_allowed_lock() */
 		migrate_live_tasks(cpu);
 		rq = cpu_rq(cpu);
-		kthread_stop(rq->migration_thread);
-		put_task_struct(rq->migration_thread);
-		rq->migration_thread = NULL;
 		/* Idle task back to normal (off runqueue, low prio) */
 		spin_lock_irq(&rq->lock);
 		update_rq_clock(rq);

@@ -2123,10 +2123,12 @@ migrate_task(struct task_struct *p, int
 
 	/*
 	 * If the task is not on a runqueue (and not running), then
-	 * the next wake-up will properly place the task.
+	 * it is sufficient to simply update the task's cpu field.
 	 */
-	if (!p->se.on_rq && !task_running(rq, p))
+	if (!p->se.on_rq && !task_running(rq, p)) {
+		set_task_cpu(p, dest_cpu);
 		return 0;
+	}
 
 	init_completion(&req->done);
 	req->task = p;

@@ -7217,9 +7219,6 @@ static int __migrate_task(struct task_st
 	/* Already moved. */
 	if (task_cpu(p) != src_cpu)
 		goto done;
-	/* Waking up, don't get in the way of try_to_wake_up(). */
-	if (p->state == TASK_WAKING)
-		goto fail;
 	/* Affinity changed (again). */
 	if (!cpumask_test_cpu(dest_cpu, &p->cpus_allowed))
 		goto fail;

@@ -392,6 +392,9 @@ static const struct net_device_ops devic
 	.ndo_start_xmit =		netvsc_start_xmit,
 	.ndo_get_stats =		netvsc_get_stats,
 	.ndo_set_multicast_list =	netvsc_set_multicast_list,
+	.ndo_change_mtu =		eth_change_mtu,
+	.ndo_validate_addr =		eth_validate_addr,
+	.ndo_set_mac_address =		eth_mac_addr,
 };
 
 static int netvsc_probe(struct device *device)

@@ -532,7 +532,7 @@ static unsigned int copy_to_bounce_buffe
 
 		ASSERT(orig_sgl[i].offset + orig_sgl[i].length <= PAGE_SIZE);
 
-		if (j == 0)
+		if (bounce_addr == 0)
 			bounce_addr = (unsigned long)kmap_atomic(sg_page((&bounce_sgl[j])), KM_IRQ0);
 
 		while (srclen) {

@@ -593,7 +593,7 @@ static unsigned int copy_from_bounce_buf
 		destlen = orig_sgl[i].length;
 		ASSERT(orig_sgl[i].offset + orig_sgl[i].length <= PAGE_SIZE);
 
-		if (j == 0)
+		if (bounce_addr == 0)
 			bounce_addr = (unsigned long)kmap_atomic(sg_page((&bounce_sgl[j])), KM_IRQ0);
 
 		while (destlen) {

@@ -192,7 +192,7 @@ Description:
 static inline u64
 GetRingBufferIndices(RING_BUFFER_INFO* RingInfo)
 {
-	return ((u64)RingInfo->RingBuffer->WriteIndex << 32) || RingInfo->RingBuffer->ReadIndex;
+	return (u64)RingInfo->RingBuffer->WriteIndex << 32;
 }
 
 

@@ -28,10 +28,10 @@
 #include "VmbusApi.h"
 
 /* Defines */
-#define STORVSC_RING_BUFFER_SIZE			(10*PAGE_SIZE)
+#define STORVSC_RING_BUFFER_SIZE			(20*PAGE_SIZE)
 #define BLKVSC_RING_BUFFER_SIZE				(20*PAGE_SIZE)
 
-#define STORVSC_MAX_IO_REQUESTS				64
+#define STORVSC_MAX_IO_REQUESTS				128
 
 /*
  * In Hyper-V, each port/path/target maps to 1 scsi host adapter.  In

@@ -652,6 +652,7 @@ static int storvsc_queuecommand(struct s
 	unsigned int request_size = 0;
 	int i;
 	struct scatterlist *sgl;
+	unsigned int sg_count = 0;
 
 	DPRINT_ENTER(STORVSC_DRV);
 

@@ -736,6 +737,7 @@ static int storvsc_queuecommand(struct s
 	request->DataBuffer.Length = scsi_bufflen(scmnd);
 	if (scsi_sg_count(scmnd)) {
 		sgl = (struct scatterlist *)scsi_sglist(scmnd);
+		sg_count = scsi_sg_count(scmnd);
 
 		/* check if we need to bounce the sgl */
 		if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) {

@@ -770,11 +772,12 @@ static int storvsc_queuecommand(struct s
 					      scsi_sg_count(scmnd));
 
 			sgl = cmd_request->bounce_sgl;
+			sg_count = cmd_request->bounce_sgl_count;
 		}
 
 		request->DataBuffer.Offset = sgl[0].offset;
 
-		for (i = 0; i < scsi_sg_count(scmnd); i++) {
+		for (i = 0; i < sg_count; i++) {
 			DPRINT_DBG(STORVSC_DRV, "sgl[%d] len %d offset %d \n",
 				   i, sgl[i].length, sgl[i].offset);
 			request->DataBuffer.PfnArray[i] =

@@ -1158,6 +1158,14 @@ __acquires(&fc->lock)
 	}
 }
 
+static void end_queued_requests(struct fuse_conn *fc)
+{
+	fc->max_background = UINT_MAX;
+	flush_bg_queue(fc);
+	end_requests(fc, &fc->pending);
+	end_requests(fc, &fc->processing);
+}
+
 /*
  * Abort all requests.
  *

@@ -1184,8 +1192,7 @@ void fuse_abort_conn(struct fuse_conn *f
 		fc->connected = 0;
 		fc->blocked = 0;
 		end_io_requests(fc);
-		end_requests(fc, &fc->pending);
-		end_requests(fc, &fc->processing);
+		end_queued_requests(fc);
 		wake_up_all(&fc->waitq);
 		wake_up_all(&fc->blocked_waitq);
 		kill_fasync(&fc->fasync, SIGIO, POLL_IN);

@@ -1200,8 +1207,9 @@ int fuse_dev_release(struct inode *inode
 	if (fc) {
 		spin_lock(&fc->lock);
 		fc->connected = 0;
-		end_requests(fc, &fc->pending);
-		end_requests(fc, &fc->processing);
+		fc->blocked = 0;
+		end_queued_requests(fc);
+		wake_up_all(&fc->blocked_waitq);
 		spin_unlock(&fc->lock);
 		fuse_conn_put(fc);
 	}

@@ -60,7 +60,7 @@
 
 #define SD_NO_CTL               0xE0
 #define NO_CTL                  0xff
-#define CTL_MODE_M              7
+#define CTL_MODE_M              0xf
 #define CTL_11A                 0
 #define CTL_11B                 1
 #define CTL_11G                 2

@@ -31,7 +31,6 @@ enum ctl_group {
 #define NO_CTL 0xff
 #define SD_NO_CTL               0xE0
 #define NO_CTL                  0xff
-#define CTL_MODE_M              7
 #define CTL_11A                 0
 #define CTL_11B                 1
 #define CTL_11G                 2

@@ -485,7 +485,11 @@ static int ocfs2_read_locked_inode(struc
 						     OCFS2_BH_IGNORE_CACHE);
 	} else {
 		status = ocfs2_read_blocks_sync(osb, args->fi_blkno, 1, &bh);
-		if (!status)
+		/*
+		 * If buffer is in jbd, then its checksum may not have been
+		 * computed as yet.
+		 */
+		if (!status && !buffer_jbd(bh))
 			status = ocfs2_validate_inode_block(osb->sb, bh);
 	}
 	if (status < 0) {

@@ -192,17 +192,19 @@ ehci_hcd_ppc_of_probe(struct of_device *
 	}
 
 	rv = usb_add_hcd(hcd, irq, 0);
-	if (rv == 0)
-		return 0;
+	if (rv)
+		goto err_ehci;
 
+	return 0;
+
+err_ehci:
+	if (ehci->has_amcc_usb23)
+		iounmap(ehci->ohci_hcctrl_reg);
 	iounmap(hcd->regs);
 err_ioremap:
 	irq_dispose_mapping(irq);
 err_irq:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-
-	if (ehci->has_amcc_usb23)
-		iounmap(ehci->ohci_hcctrl_reg);
 err_rmr:
 	usb_put_hcd(hcd);
 

@@ -291,9 +291,13 @@ gen_ndis_query_resp (int configNr, u32 O
 	/* mandatory */
 	case OID_GEN_VENDOR_DESCRIPTION:
 		pr_debug("%s: OID_GEN_VENDOR_DESCRIPTION\n", __func__);
-		length = strlen (rndis_per_dev_params [configNr].vendorDescr);
-		memcpy (outbuf,
-			rndis_per_dev_params [configNr].vendorDescr, length);
+		if ( rndis_per_dev_params [configNr].vendorDescr ) {
+			length = strlen (rndis_per_dev_params [configNr].vendorDescr);
+			memcpy (outbuf,
+				rndis_per_dev_params [configNr].vendorDescr, length);
+		} else {
+			outbuf[0] = 0;
+		}
 		retval = 0;
 		break;
 

@@ -111,6 +111,7 @@ static struct usb_device_id id_table []
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */

@@ -124,14 +125,14 @@ static struct usb_device_id id_table []
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
-	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
-	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
-	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
-	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
 

@@ -90,6 +90,7 @@ static struct usb_device_id id_table []
 	{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */

@@ -759,6 +759,14 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
 	{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

@@ -135,6 +135,18 @@
 #define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
 
 /*
+ * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
+ */
+#define FTDI_CHAMSYS_24_MASTER_WING_PID        0xDAF8
+#define FTDI_CHAMSYS_PC_WING_PID       0xDAF9
+#define FTDI_CHAMSYS_USB_DMX_PID       0xDAFA
+#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
+#define FTDI_CHAMSYS_MINI_WING_PID     0xDAFC
+#define FTDI_CHAMSYS_MAXI_WING_PID     0xDAFD
+#define FTDI_CHAMSYS_MEDIA_WING_PID    0xDAFE
+#define FTDI_CHAMSYS_WING_PID  0xDAFF
+
+/*
  * Westrex International devices submitted by Cory Lee
  */
 #define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */

@@ -127,8 +127,9 @@
 #define BANDB_DEVICE_ID_US9ML2_4	0xAC30
 #define BANDB_DEVICE_ID_USPTL4_2	0xAC31
 #define BANDB_DEVICE_ID_USPTL4_4	0xAC32
-#define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
-#define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_2	0xAC42
+#define BANDB_DEVICE_ID_USOPTL4_4	0xAC44
+#define BANDB_DEVICE_ID_USOPTL2_4	0xAC24
 
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840

@@ -191,6 +192,7 @@ static struct usb_device_id moschip_port
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */

@@ -207,6 +209,7 @@ static __devinitdata struct usb_device_i
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */

@@ -130,6 +130,7 @@
 #define BANDB_DEVICE_ID_USOPTL4_2	0xAC42
 #define BANDB_DEVICE_ID_USOPTL4_4	0xAC44
 #define BANDB_DEVICE_ID_USOPTL2_4	0xAC24
+#define BANDB_DEVICE_ID_USOPTL4_2P      0xBC02
 
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840

@@ -193,6 +194,7 @@ static struct usb_device_id moschip_port
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */

@@ -210,6 +212,7 @@ static __devinitdata struct usb_device_i
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */

@@ -286,12 +286,19 @@ static int mos7840_get_reg_sync(struct u
 {
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
-			      MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
+			      MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
+	*val = buf[0];
 	dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
-	*val = (*val) & 0x00ff;
+
+	kfree(buf);
 	return ret;
 }
 

@@ -344,6 +351,11 @@ static int mos7840_get_uart_reg(struct u
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
 	__u16 Wval;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
 	/* dbg("application number is %4x",
 	    (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */

@@ -367,9 +379,11 @@ static int mos7840_get_uart_reg(struct u
 		}
 	}
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
-			      MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH,
+			      MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
-	*val = (*val) & 0x00ff;
+	*val = buf[0];
+
+	kfree(buf);
 	return ret;
 }
 

@@ -120,17 +120,20 @@
  * by making a change here, in moschip_port_id_table, and in
  * moschip_id_table_combined
  */
-#define USB_VENDOR_ID_BANDB             0x0856
-#define BANDB_DEVICE_ID_USO9ML2_2	0xAC22
-#define BANDB_DEVICE_ID_USO9ML2_4	0xAC24
-#define BANDB_DEVICE_ID_US9ML2_2	0xAC29
-#define BANDB_DEVICE_ID_US9ML2_4	0xAC30
-#define BANDB_DEVICE_ID_USPTL4_2	0xAC31
-#define BANDB_DEVICE_ID_USPTL4_4	0xAC32
-#define BANDB_DEVICE_ID_USOPTL4_2	0xAC42
-#define BANDB_DEVICE_ID_USOPTL4_4	0xAC44
-#define BANDB_DEVICE_ID_USOPTL2_4	0xAC24
-#define BANDB_DEVICE_ID_USOPTL4_2P      0xBC02
+#define USB_VENDOR_ID_BANDB              0x0856
+#define BANDB_DEVICE_ID_USO9ML2_2        0xAC22
+#define BANDB_DEVICE_ID_USO9ML2_2P       0xBC00
+#define BANDB_DEVICE_ID_USO9ML2_4        0xAC24
+#define BANDB_DEVICE_ID_USO9ML2_4P       0xBC01
+#define BANDB_DEVICE_ID_US9ML2_2         0xAC29
+#define BANDB_DEVICE_ID_US9ML2_4         0xAC30
+#define BANDB_DEVICE_ID_USPTL4_2         0xAC31
+#define BANDB_DEVICE_ID_USPTL4_4         0xAC32
+#define BANDB_DEVICE_ID_USOPTL4_2        0xAC42
+#define BANDB_DEVICE_ID_USOPTL4_2P       0xBC02
+#define BANDB_DEVICE_ID_USOPTL4_4        0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_4P       0xBC03
+#define BANDB_DEVICE_ID_USOPTL2_4        0xAC24
 
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840

@@ -186,15 +189,18 @@ static struct usb_device_id moschip_port
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */

@@ -204,15 +210,18 @@ static __devinitdata struct usb_device_i
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */

@@ -1464,6 +1464,12 @@ err_out:
 }
 
 #endif /* CONFIG_PM */
+
+#define NOKIA_PCSUITE_ACM_INFO(x) \
+		USB_DEVICE_AND_INTERFACE_INFO(0x0421, x, \
+		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+		USB_CDC_ACM_PROTO_VENDOR)
+
 /*
  * USB driver structure.
  */

@@ -1522,6 +1528,57 @@ static struct usb_device_id acm_ids[] =
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},
 
+	/* Nokia S60 phones expose two ACM channels. The first is
+	 * a modem and is picked up by the standard AT-command
+	 * information below. The second is 'vendor-specific' but
+	 * is treated as a serial device at the S60 end, so we want
+	 * to expose it on Linux too. */
+	{ NOKIA_PCSUITE_ACM_INFO(0x042D), }, /* Nokia 3250 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04D8), }, /* Nokia 5500 Sport */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04C9), }, /* Nokia E50 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0419), }, /* Nokia E60 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x044D), }, /* Nokia E61 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0001), }, /* Nokia E61i */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0475), }, /* Nokia E62 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0508), }, /* Nokia E65 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0418), }, /* Nokia E70 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0425), }, /* Nokia N71 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0486), }, /* Nokia N73 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04DF), }, /* Nokia N75 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x000e), }, /* Nokia N77 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0445), }, /* Nokia N80 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x042F), }, /* Nokia N91 & N91 8GB */
+	{ NOKIA_PCSUITE_ACM_INFO(0x048E), }, /* Nokia N92 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0420), }, /* Nokia N93 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04E6), }, /* Nokia N93i  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04B2), }, /* Nokia 5700 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0134), }, /* Nokia 6110 Navigator (China) */
+	{ NOKIA_PCSUITE_ACM_INFO(0x046E), }, /* Nokia 6110 Navigator */
+	{ NOKIA_PCSUITE_ACM_INFO(0x002f), }, /* Nokia 6120 classic &  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0088), }, /* Nokia 6121 classic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00fc), }, /* Nokia 6124 classic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0042), }, /* Nokia E51 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00b0), }, /* Nokia E66 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00ab), }, /* Nokia E71 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0481), }, /* Nokia N76 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0007), }, /* Nokia N81 & N81 8GB */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0071), }, /* Nokia N82 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04F0), }, /* Nokia N95 & N95-3 NAM */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0070), }, /* Nokia N95 8GB  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0099), }, /* Nokia 6210 Navigator, RM-367 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0128), }, /* Nokia 6210 Navigator, RM-419 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x008f), }, /* Nokia 6220 Classic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00a0), }, /* Nokia 6650 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x007b), }, /* Nokia N78 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0094), }, /* Nokia N85 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x003a), }, /* Nokia N96 & N96-3  */
+	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+
+	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
+
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },

@@ -1536,7 +1593,6 @@ static struct usb_device_id acm_ids[] =
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_CDMA) },
 
-	/* NOTE:  COMM/ACM/0xff is likely MSFT RNDIS ... NOT a modem!! */
 	{ }
 };
 

@@ -1527,6 +1527,9 @@ static struct usb_device_id acm_ids[] =
 	{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},
+	{ USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
 
 	/* Nokia S60 phones expose two ACM channels. The first is
 	 * a modem and is picked up by the standard AT-command

@@ -1579,6 +1579,7 @@ static struct usb_device_id acm_ids[] =
 	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 

@@ -1470,6 +1470,11 @@ err_out:
 		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
 		USB_CDC_ACM_PROTO_VENDOR)
 
+#define SAMSUNG_PCSUITE_ACM_INFO(x) \
+		USB_DEVICE_AND_INTERFACE_INFO(0x04e7, x, \
+		USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+		USB_CDC_ACM_PROTO_VENDOR)
+
 /*
  * USB driver structure.
  */

@@ -1580,6 +1585,17 @@ static struct usb_device_id acm_ids[] =
 	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0178), }, /* Nokia E63 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x010e), }, /* Nokia E75 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02d9), }, /* Nokia 6760 Slide */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01d0), }, /* Nokia E52 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0223), }, /* Nokia E72 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0275), }, /* Nokia X6 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x026c), }, /* Nokia N97 Mini */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
+	{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 

@@ -1599,6 +1599,10 @@ static struct usb_device_id acm_ids[] =
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
+	/* control interfaces without any protocol set */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+		USB_CDC_PROTO_NONE) },
+
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },

@@ -971,7 +971,8 @@ static int acm_probe(struct usb_interfac
 	}
 
 	if (!buflen) {
-		if (intf->cur_altsetting->endpoint->extralen &&
+		if (intf->cur_altsetting->endpoint &&
+				intf->cur_altsetting->endpoint->extralen &&
 				intf->cur_altsetting->endpoint->extra) {
 			dev_dbg(&intf->dev,
 				"Seeking extra descriptors on endpoint\n");

@@ -12389,6 +12389,7 @@ static int alc268_new_analog_output(stru
 		dac = 0x02;
 		break;
 	case 0x15:
+	case 0x21: /* ALC269vb has this pin, too */
 		dac = 0x03;
 		break;
 	default:

@@ -280,13 +280,10 @@ snd_seq_oss_open(struct file *file, int
 	return 0;
 
  _error:
-	snd_seq_oss_writeq_delete(dp->writeq);
-	snd_seq_oss_readq_delete(dp->readq);
 	snd_seq_oss_synth_cleanup(dp);
 	snd_seq_oss_midi_cleanup(dp);
-	delete_port(dp);
 	delete_seq_queue(dp->queue);
-	kfree(dp);
+	delete_port(dp);
 
 	return rc;
 }

@@ -349,8 +346,10 @@ create_port(struct seq_oss_devinfo *dp)
 static int
 delete_port(struct seq_oss_devinfo *dp)
 {
-	if (dp->port < 0)
+	if (dp->port < 0) {
+		kfree(dp);
 		return 0;
+	}
 
 	debug_printk(("delete_port %i\n", dp->port));
 	return snd_seq_event_port_detach(dp->cseq, dp->port);

@@ -340,7 +340,7 @@ static int sysfs_open_file(struct inode
 	char *p;
 
 	p = d_path(&file->f_path, last_sysfs_file, sizeof(last_sysfs_file));
-	if (p)
+	if (!IS_ERR(p))
 		memmove(last_sysfs_file, p, strlen(p) + 1);
 
 	/* need attr_sd for attr and ops, its parent for kobj */

@@ -1006,7 +1006,8 @@ static int tun_set_iff(struct net *net,
 		if (err < 0)
 			goto err_free_sk;
 
-		if (device_create_file(&tun->dev->dev, &dev_attr_tun_flags) ||
+		if (!net_eq(dev_net(tun->dev), &init_net) ||
+		    device_create_file(&tun->dev->dev, &dev_attr_tun_flags) ||
 		    device_create_file(&tun->dev->dev, &dev_attr_owner) ||
 		    device_create_file(&tun->dev->dev, &dev_attr_group))
 			printk(KERN_ERR "Failed to create tun sysfs files\n");

@@ -140,16 +140,6 @@ static struct notifier_block module_load
 	.notifier_call = module_load_notify,
 };
 
-
-static void end_sync(void)
-{
-	end_cpu_work();
-	/* make sure we don't leak task structs */
-	process_task_mortuary();
-	process_task_mortuary();
-}
-
-
 int sync_start(void)
 {
 	int err;

@@ -157,7 +147,7 @@ int sync_start(void)
 	if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
 		return -ENOMEM;
 
-	start_cpu_work();
+	mutex_lock(&buffer_mutex);
 
 	err = task_handoff_register(&task_free_nb);
 	if (err)

@@ -172,7 +162,10 @@ int sync_start(void)
 	if (err)
 		goto out4;
 
+	start_cpu_work();
+
 out:
+	mutex_unlock(&buffer_mutex);
 	return err;
 out4:
 	profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);

@@ -181,7 +174,6 @@ out3:
 out2:
 	task_handoff_unregister(&task_free_nb);
 out1:
-	end_sync();
 	free_cpumask_var(marked_cpus);
 	goto out;
 }

@@ -189,11 +181,20 @@ out1:
 
 void sync_stop(void)
 {
+	/* flush buffers */
+	mutex_lock(&buffer_mutex);
+	end_cpu_work();
 	unregister_module_notifier(&module_load_nb);
 	profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
 	profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
 	task_handoff_unregister(&task_free_nb);
-	end_sync();
+	mutex_unlock(&buffer_mutex);
+	flush_scheduled_work();
+
+	/* make sure we don't leak task structs */
+	process_task_mortuary();
+	process_task_mortuary();
+
 	free_cpumask_var(marked_cpus);
 }
 

@@ -121,8 +121,6 @@ void end_cpu_work(void)
 
 		cancel_delayed_work(&b->work);
 	}
-
-	flush_scheduled_work();
 }
 
 /*

@@ -518,8 +518,13 @@ static int __init init_sysfs(void)
 	int error;
 
 	error = sysdev_class_register(&oprofile_sysclass);
-	if (!error)
-		error = sysdev_register(&device_oprofile);
+	if (error)
+		return error;
+
+	error = sysdev_register(&device_oprofile);
+	if (error)
+		sysdev_class_unregister(&oprofile_sysclass);
+
 	return error;
 }
 

@@ -645,6 +650,8 @@ int __init op_nmi_init(struct oprofile_o
 	char *cpu_type = NULL;
 	int ret = 0;
 
+	using_nmi = 0;
+
 	if (!cpu_has_apic)
 		return -ENODEV;
 

@@ -727,7 +734,10 @@ int __init op_nmi_init(struct oprofile_o
 
 	mux_init(ops);
 
-	init_sysfs();
+	ret = init_sysfs();
+	if (ret)
+		return ret;
+
 	using_nmi = 1;
 	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
 	return 0;

@@ -535,8 +535,10 @@ static void exit_sysfs(void)
 }
 
 #else
-#define init_sysfs() do { } while (0)
-#define exit_sysfs() do { } while (0)
+
+static inline int  init_sysfs(void) { return 0; }
+static inline void exit_sysfs(void) { }
+
 #endif /* CONFIG_PM */
 
 static int __init p4_init(char **cpu_type)

@@ -1007,9 +1007,6 @@ static int usbhid_start(struct hid_devic
 
 	spin_lock_init(&usbhid->lock);
 
-	usbhid->intf = intf;
-	usbhid->ifnum = interface->desc.bInterfaceNumber;
-
 	usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
 	if (!usbhid->urbctrl) {
 		ret = -ENOMEM;

@@ -1180,6 +1177,8 @@ static int usbhid_probe(struct usb_inter
 
 	hid->driver_data = usbhid;
 	usbhid->hid = hid;
+	usbhid->intf = intf;
+	usbhid->ifnum = interface->desc.bInterfaceNumber;
 
 	ret = hid_add_device(hid);
 	if (ret) {

@@ -1000,13 +1000,6 @@ static int usbhid_start(struct hid_devic
 		}
 	}
 
-	init_waitqueue_head(&usbhid->wait);
-	INIT_WORK(&usbhid->reset_work, hid_reset);
-	INIT_WORK(&usbhid->restart_work, __usbhid_restart_queues);
-	setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
-
-	spin_lock_init(&usbhid->lock);
-
 	usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
 	if (!usbhid->urbctrl) {
 		ret = -ENOMEM;

@@ -1180,6 +1173,12 @@ static int usbhid_probe(struct usb_inter
 	usbhid->intf = intf;
 	usbhid->ifnum = interface->desc.bInterfaceNumber;
 
+	init_waitqueue_head(&usbhid->wait);
+	INIT_WORK(&usbhid->reset_work, hid_reset);
+	INIT_WORK(&usbhid->restart_work, __usbhid_restart_queues);
+	setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
+	spin_lock_init(&usbhid->lock);
+
 	ret = hid_add_device(hid);
 	if (ret) {
 		if (ret != -ENODEV)

@@ -5504,6 +5504,7 @@ static int ata_host_request_pm(struct at
  */
 int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 {
+	unsigned int ehi_flags = ATA_EHI_QUIET;
 	int rc;
 
 	/*

@@ -5512,7 +5513,18 @@ int ata_host_suspend(struct ata_host *ho
 	 */
 	ata_lpm_enable(host);
 
-	rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
+	/*
+	 * On some hardware, device fails to respond after spun down
+	 * for suspend.  As the device won't be used before being
+	 * resumed, we don't need to touch the device.  Ask EH to skip
+	 * the usual stuff and proceed directly to suspend.
+	 *
+	 * http://thread.gmane.org/gmane.linux.ide/46764
+	 */
+	if (mesg.event == PM_EVENT_SUSPEND)
+		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
+
+	rc = ata_host_request_pm(host, mesg, 0, ehi_flags, 1);
 	if (rc == 0)
 		host->dev->power.power_state = mesg;
 	return rc;

@@ -3149,6 +3149,10 @@ static int ata_eh_skip_recovery(struct a
 	if (link->flags & ATA_LFLAG_DISABLED)
 		return 1;
 
+	/* skip if explicitly requested */
+	if (ehc->i.flags & ATA_EHI_NO_RECOVERY)
+		return 1;
+
 	/* thaw frozen port and recover failed devices */
 	if ((ap->pflags & ATA_PFLAG_FROZEN) || ata_link_nr_enabled(link))
 		return 0;

@@ -339,6 +339,7 @@ enum {
 	ATA_EHI_HOTPLUGGED	= (1 << 0),  /* could have been hotplugged */
 	ATA_EHI_NO_AUTOPSY	= (1 << 2),  /* no autopsy */
 	ATA_EHI_QUIET		= (1 << 3),  /* be quiet */
+	ATA_EHI_NO_RECOVERY	= (1 << 4),  /* no recovery */
 
 	ATA_EHI_DID_SOFTRESET	= (1 << 16), /* already soft-reset this port */
 	ATA_EHI_DID_HARDRESET	= (1 << 17), /* already soft-reset this port */

@@ -369,11 +369,18 @@ static int function_stat_show(struct seq
 {
 	struct ftrace_profile *rec = v;
 	char str[KSYM_SYMBOL_LEN];
+	int ret = 0;
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	static DEFINE_MUTEX(mutex);
 	static struct trace_seq s;
 	unsigned long long avg;
 #endif
+	mutex_lock(&ftrace_profile_lock);
+
+	/* we raced with function_profile_reset() */
+	if (unlikely(rec->counter == 0)) {
+		ret = -EBUSY;
+		goto out;
+	}
 
 	kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
 	seq_printf(m, "  %-30.30s  %10lu", str, rec->counter);

@@ -383,17 +390,17 @@ static int function_stat_show(struct seq
 	avg = rec->time;
 	do_div(avg, rec->counter);
 
-	mutex_lock(&mutex);
 	trace_seq_init(&s);
 	trace_print_graph_duration(rec->time, &s);
 	trace_seq_puts(&s, "    ");
 	trace_print_graph_duration(avg, &s);
 	trace_print_seq(m, &s);
-	mutex_unlock(&mutex);
 #endif
 	seq_putc(m, '\n');
+out:
+	mutex_unlock(&ftrace_profile_lock);
 
-	return 0;
+	return ret;
 }
 
 static void ftrace_profile_reset(struct ftrace_profile_stat *stat)

@@ -2400,7 +2400,7 @@ static const struct file_operations ftra
 	.open = ftrace_filter_open,
 	.read = seq_read,
 	.write = ftrace_filter_write,
-	.llseek = ftrace_regex_lseek,
+	.llseek = no_llseek,
 	.release = ftrace_filter_release,
 };
 

@@ -1480,6 +1480,8 @@ static void *t_start(struct seq_file *m,
 		if (*pos > 0)
 			return t_hash_start(m, pos);
 		iter->flags |= FTRACE_ITER_PRINTALL;
+		/* reset in case of seek/pread */
+		iter->flags &= ~FTRACE_ITER_HASH;
 		return iter;
 	}
 

@@ -1101,7 +1101,7 @@ int irlan_extract_param(__u8 *buf, char
 	memcpy(&val_len, buf+n, 2); /* To avoid alignment problems */
 	le16_to_cpus(&val_len); n+=2;
 
-	if (val_len > 1016) {
+	if (val_len >= 1016) {
 		IRDA_DEBUG(2, "%s(), parameter length to long\n", __func__ );
 		return -RSP_INVALID_COMMAND_FORMAT;
 	}

@@ -33,10 +33,11 @@
  * @children: child nodes
  * @all: list head for list of all nodes
  * @parent: parent node
- * @info: associated profiling data structure if not a directory
- * @ghost: when an object file containing profiling data is unloaded we keep a
- *         copy of the profiling data here to allow collecting coverage data
- *         for cleanup code. Such a node is called a "ghost".
+ * @loaded_info: array of pointers to profiling data sets for loaded object
+ *   files.
+ * @num_loaded: number of profiling data sets for loaded object files.
+ * @unloaded_info: accumulated copy of profiling data sets for unloaded
+ *   object files. Used only when gcov_persist=1.
  * @dentry: main debugfs entry, either a directory or data file
  * @links: associated symbolic links
  * @name: data file basename

@@ -51,10 +52,11 @@ struct gcov_node {
 	struct list_head children;
 	struct list_head all;
 	struct gcov_node *parent;
-	struct gcov_info *info;
-	struct gcov_info *ghost;
+	struct gcov_info **loaded_info;
+	struct gcov_info *unloaded_info;
 	struct dentry *dentry;
 	struct dentry **links;
+	int num_loaded;
 	char name[0];
 };
 

@@ -136,16 +138,37 @@ static const struct seq_operations gcov_
 };
 
 /*
- * Return the profiling data set for a given node. This can either be the
- * original profiling data structure or a duplicate (also called "ghost")
- * in case the associated object file has been unloaded.
+ * Return a profiling data set associated with the given node. This is
+ * either a data set for a loaded object file or a data set copy in case
+ * all associated object files have been unloaded.
  */
 static struct gcov_info *get_node_info(struct gcov_node *node)
 {
-	if (node->info)
-		return node->info;
+	if (node->num_loaded > 0)
+		return node->loaded_info[0];
 
-	return node->ghost;
+	return node->unloaded_info;
+}
+
+/*
+ * Return a newly allocated profiling data set which contains the sum of
+ * all profiling data associated with the given node.
+ */
+static struct gcov_info *get_accumulated_info(struct gcov_node *node)
+{
+	struct gcov_info *info;
+	int i = 0;
+
+	if (node->unloaded_info)
+		info = gcov_info_dup(node->unloaded_info);
+	else
+		info = gcov_info_dup(node->loaded_info[i++]);
+	if (!info)
+		return NULL;
+	for (; i < node->num_loaded; i++)
+		gcov_info_add(info, node->loaded_info[i]);
+
+	return info;
 }
 
 /*

@@ -163,9 +186,10 @@ static int gcov_seq_open(struct inode *i
 	mutex_lock(&node_lock);
 	/*
 	 * Read from a profiling data copy to minimize reference tracking
-	 * complexity and concurrent access.
+	 * complexity and concurrent access and to keep accumulating multiple
+	 * profiling data sets associated with one node simple.
 	 */
-	info = gcov_info_dup(get_node_info(node));
+	info = get_accumulated_info(node);
 	if (!info)
 		goto out_unlock;
 	iter = gcov_iter_new(info);

@@ -225,12 +249,25 @@ static struct gcov_node *get_node_by_nam
 	return NULL;
 }
 
+/*
+ * Reset all profiling data associated with the specified node.
+ */
+static void reset_node(struct gcov_node *node)
+{
+	int i;
+
+	if (node->unloaded_info)
+		gcov_info_reset(node->unloaded_info);
+	for (i = 0; i < node->num_loaded; i++)
+		gcov_info_reset(node->loaded_info[i]);
+}
+
 static void remove_node(struct gcov_node *node);
 
 /*
  * write() implementation for gcov data files. Reset profiling data for the
- * associated file. If the object file has been unloaded (i.e. this is
- * a "ghost" node), remove the debug fs node as well.
+ * corresponding file. If all associated object files have been unloaded,
+ * remove the debug fs node as well.
  */
 static ssize_t gcov_seq_write(struct file *file, const char __user *addr,
 			      size_t len, loff_t *pos)

@@ -245,10 +282,10 @@ static ssize_t gcov_seq_write(struct fil
 	node = get_node_by_name(info->filename);
 	if (node) {
 		/* Reset counts or remove node for unloaded modules. */
-		if (node->ghost)
+		if (node->num_loaded == 0)
 			remove_node(node);
 		else
-			gcov_info_reset(node->info);
+			reset_node(node);
 	}
 	/* Reset counts for open file. */
 	gcov_info_reset(info);

@@ -378,7 +415,10 @@ static void init_node(struct gcov_node *
 	INIT_LIST_HEAD(&node->list);
 	INIT_LIST_HEAD(&node->children);
 	INIT_LIST_HEAD(&node->all);
-	node->info = info;
+	if (node->loaded_info) {
+		node->loaded_info[0] = info;
+		node->num_loaded = 1;
+	}
 	node->parent = parent;
 	if (name)
 		strcpy(node->name, name);

@@ -394,9 +434,13 @@ static struct gcov_node *new_node(struct
 	struct gcov_node *node;
 
 	node = kzalloc(sizeof(struct gcov_node) + strlen(name) + 1, GFP_KERNEL);
-	if (!node) {
-		pr_warning("out of memory\n");
-		return NULL;
+	if (!node)
+		goto err_nomem;
+	if (info) {
+		node->loaded_info = kcalloc(1, sizeof(struct gcov_info *),
+					   GFP_KERNEL);
+		if (!node->loaded_info)
+			goto err_nomem;
 	}
 	init_node(node, info, name, parent);
 	/* Differentiate between gcov data file nodes and directory nodes. */

@@ -416,6 +460,11 @@ static struct gcov_node *new_node(struct
 	list_add(&node->all, &all_head);
 
 	return node;
+
+err_nomem:
+	kfree(node);
+	pr_warning("out of memory\n");
+	return NULL;
 }
 
 /* Remove symbolic links associated with node. */

@@ -441,8 +490,9 @@ static void release_node(struct gcov_nod
 	list_del(&node->all);
 	debugfs_remove(node->dentry);
 	remove_links(node);
-	if (node->ghost)
-		gcov_info_free(node->ghost);
+	kfree(node->loaded_info);
+	if (node->unloaded_info)
+		gcov_info_free(node->unloaded_info);
 	kfree(node);
 }
 

@@ -477,7 +527,7 @@ static struct gcov_node *get_child_by_na
 
 /*
  * write() implementation for reset file. Reset all profiling data to zero
- * and remove ghost nodes.
+ * and remove nodes for which all associated object files are unloaded.
  */
 static ssize_t reset_write(struct file *file, const char __user *addr,
 			   size_t len, loff_t *pos)

@@ -487,8 +537,8 @@ static ssize_t reset_write(struct file *
 	mutex_lock(&node_lock);
 restart:
 	list_for_each_entry(node, &all_head, all) {
-		if (node->info)
-			gcov_info_reset(node->info);
+		if (node->num_loaded > 0)
+			reset_node(node);
 		else if (list_empty(&node->children)) {
 			remove_node(node);
 			/* Several nodes may have gone - restart loop. */

@@ -564,37 +614,115 @@ err_remove:
 }
 
 /*
- * The profiling data set associated with this node is being unloaded. Store a
- * copy of the profiling data and turn this node into a "ghost".
+ * Associate a profiling data set with an existing node. Needs to be called
+ * with node_lock held.
  */
-static int ghost_node(struct gcov_node *node)
+static void add_info(struct gcov_node *node, struct gcov_info *info)
 {
-	node->ghost = gcov_info_dup(node->info);
-	if (!node->ghost) {
-		pr_warning("could not save data for '%s' (out of memory)\n",
-			   node->info->filename);
-		return -ENOMEM;
+	struct gcov_info **loaded_info;
+	int num = node->num_loaded;
+
+	/*
+	 * Prepare new array. This is done first to simplify cleanup in
+	 * case the new data set is incompatible, the node only contains
+	 * unloaded data sets and there's not enough memory for the array.
+	 */
+	loaded_info = kcalloc(num + 1, sizeof(struct gcov_info *), GFP_KERNEL);
+	if (!loaded_info) {
+		pr_warning("could not add '%s' (out of memory)\n",
+			   info->filename);
+		return;
+	}
+	memcpy(loaded_info, node->loaded_info,
+	       num * sizeof(struct gcov_info *));
+	loaded_info[num] = info;
+	/* Check if the new data set is compatible. */
+	if (num == 0) {
+		/*
+		 * A module was unloaded, modified and reloaded. The new
+		 * data set replaces the copy of the last one.
+		 */
+		if (!gcov_info_is_compatible(node->unloaded_info, info)) {
+			pr_warning("discarding saved data for %s "
+				   "(incompatible version)\n", info->filename);
+			gcov_info_free(node->unloaded_info);
+			node->unloaded_info = NULL;
+		}
+	} else {
+		/*
+		 * Two different versions of the same object file are loaded.
+		 * The initial one takes precedence.
+		 */
+		if (!gcov_info_is_compatible(node->loaded_info[0], info)) {
+			pr_warning("could not add '%s' (incompatible "
+				   "version)\n", info->filename);
+			kfree(loaded_info);
+			return;
+		}
 	}
-	node->info = NULL;
+	/* Overwrite previous array. */
+	kfree(node->loaded_info);
+	node->loaded_info = loaded_info;
+	node->num_loaded = num + 1;
+}
 
-	return 0;
+/*
+ * Return the index of a profiling data set associated with a node.
+ */
+static int get_info_index(struct gcov_node *node, struct gcov_info *info)
+{
+	int i;
+
+	for (i = 0; i < node->num_loaded; i++) {
+		if (node->loaded_info[i] == info)
+			return i;
+	}
+	return -ENOENT;
 }
 
 /*
- * Profiling data for this node has been loaded again. Add profiling data
- * from previous instantiation and turn this node into a regular node.
+ * Save the data of a profiling data set which is being unloaded.
  */
-static void revive_node(struct gcov_node *node, struct gcov_info *info)
+static void save_info(struct gcov_node *node, struct gcov_info *info)
 {
-	if (gcov_info_is_compatible(node->ghost, info))
-		gcov_info_add(info, node->ghost);
+	if (node->unloaded_info)
+		gcov_info_add(node->unloaded_info, info);
 	else {
-		pr_warning("discarding saved data for '%s' (version changed)\n",
+		node->unloaded_info = gcov_info_dup(info);
+		if (!node->unloaded_info) {
+			pr_warning("could not save data for '%s' "
+				   "(out of memory)\n", info->filename);
+		}
+	}
+}
+
+/*
+ * Disassociate a profiling data set from a node. Needs to be called with
+ * node_lock held.
+ */
+static void remove_info(struct gcov_node *node, struct gcov_info *info)
+{
+	int i;
+
+	i = get_info_index(node, info);
+	if (i < 0) {
+		pr_warning("could not remove '%s' (not found)\n",
 			   info->filename);
+		return;
 	}
-	gcov_info_free(node->ghost);
-	node->ghost = NULL;
-	node->info = info;
+	if (gcov_persist)
+		save_info(node, info);
+	/* Shrink array. */
+	node->loaded_info[i] = node->loaded_info[node->num_loaded - 1];
+	node->num_loaded--;
+	if (node->num_loaded > 0)
+		return;
+	/* Last loaded data set was removed. */
+	kfree(node->loaded_info);
+	node->loaded_info = NULL;
+	node->num_loaded = 0;
+	if (!node->unloaded_info)
+		remove_node(node);
 }
 
 /*

@@ -609,30 +737,18 @@ void gcov_event(enum gcov_action action,
 	node = get_node_by_name(info->filename);
 	switch (action) {
 	case GCOV_ADD:
-		/* Add new node or revive ghost. */
-		if (!node) {
+		if (node)
+			add_info(node, info);
+		else
 			add_node(info);
-			break;
-		}
-		if (gcov_persist)
-			revive_node(node, info);
-		else {
-			pr_warning("could not add '%s' (already exists)\n",
-				   info->filename);
-		}
 		break;
 	case GCOV_REMOVE:
-		/* Remove node or turn into ghost. */
-		if (!node) {
+		if (node)
+			remove_info(node, info);
+		else {
 			pr_warning("could not remove '%s' (not found)\n",
 				   info->filename);
-			break;
 		}
-		if (gcov_persist) {
-			if (!ghost_node(node))
-				break;
-		}
-		remove_node(node);
 		break;
 	}
 	mutex_unlock(&node_lock);

@@ -102,10 +102,7 @@
 
 #define ack_mmc_irqs(host, i) \
 	do { \
-		u32 mask;\
-		mask  = sd_ctrl_read32((host), CTL_STATUS); \
-		mask &= ~((i) & TMIO_MASK_IRQ); \
-		sd_ctrl_write32((host), CTL_STATUS, mask); \
+		sd_ctrl_write32((host), CTL_STATUS, ~(i)); \
 	} while (0)
 
 

@@ -161,6 +161,7 @@ tmio_mmc_start_command(struct tmio_mmc_h
 static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
 	struct mmc_data *data = host->data;
+	void *sg_virt;
 	unsigned short *buf;
 	unsigned int count;
 	unsigned long flags;

@@ -170,8 +171,8 @@ static inline void tmio_mmc_pio_irq(stru
 		return;
 	}
 
-	buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
-	      host->sg_off);
+	sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
+	buf = (unsigned short *)(sg_virt + host->sg_off);
 
 	count = host->sg_ptr->length - host->sg_off;
 	if (count > data->blksz)

@@ -188,7 +189,7 @@ static inline void tmio_mmc_pio_irq(stru
 
 	host->sg_off += count;
 
-	tmio_mmc_kunmap_atomic(host, &flags);
+	tmio_mmc_kunmap_atomic(sg_virt, &flags);
 
 	if (host->sg_off == host->sg_ptr->length)
 		tmio_mmc_next_sg(host);

@@ -197,19 +197,17 @@ static inline int tmio_mmc_next_sg(struc
 	return --host->sg_len;
 }
 
-static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host,
+static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg,
 	unsigned long *flags)
 {
-	struct scatterlist *sg = host->sg_ptr;
-
 	local_irq_save(*flags);
 	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
 }
 
-static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host,
+static inline void tmio_mmc_kunmap_atomic(void *virt,
 	unsigned long *flags)
 {
-	kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
+	kunmap_atomic(virt, KM_BIO_SRC_IRQ);
 	local_irq_restore(*flags);
 }
 

@@ -115,8 +115,8 @@ static void copy_to_high_bio_irq(struct
 		 */
 		vfrom = page_address(fromvec->bv_page) + tovec->bv_offset;
 
-		flush_dcache_page(tovec->bv_page);
 		bounce_copy_vec(tovec, vfrom);
+		flush_dcache_page(tovec->bv_page);
 	}
 }
 

@@ -143,10 +143,9 @@ int groups_search(const struct group_inf
 	right = group_info->ngroups;
 	while (left < right) {
 		unsigned int mid = (left+right)/2;
-		int cmp = grp - GROUP_AT(group_info, mid);
-		if (cmp > 0)
+		if (grp > GROUP_AT(group_info, mid))
 			left = mid + 1;
-		else if (cmp < 0)
+		else if (grp < GROUP_AT(group_info, mid))
 			right = mid;
 		else
 			return 1;

@@ -723,7 +723,7 @@ static int __init init_misc_binfmt(void)
 {
 	int err = register_filesystem(&bm_fs_type);
 	if (!err) {
-		err = register_binfmt(&misc_format);
+		err = insert_binfmt(&misc_format);
 		if (err)
 			unregister_filesystem(&bm_fs_type);
 	}

@@ -1412,8 +1412,8 @@ static int __init i8042_init(void)
 
 static void __exit i8042_exit(void)
 {
-	platform_driver_unregister(&i8042_driver);
 	platform_device_unregister(i8042_platform_device);
+	platform_driver_unregister(&i8042_driver);
 	i8042_platform_exit();
 
 	panic_blink = NULL;

@@ -551,19 +551,19 @@ static inline int pageblock_free(struct
 /* Return the start of the next active pageblock after a given page */
 static struct page *next_active_pageblock(struct page *page)
 {
-	int pageblocks_stride;
-
 	/* Ensure the starting page is pageblock-aligned */
 	BUG_ON(page_to_pfn(page) & (pageblock_nr_pages - 1));
 
-	/* Move forward by at least 1 * pageblock_nr_pages */
-	pageblocks_stride = 1;
-
 	/* If the entire pageblock is free, move to the end of free page */
-	if (pageblock_free(page))
-		pageblocks_stride += page_order(page) - pageblock_order;
+	if (pageblock_free(page)) {
+		int order;
+		/* be careful. we don't have locks, page_order can be changed.*/
+		order = page_order(page);
+		if ((order < MAX_ORDER) && (order >= pageblock_order))
+			return page + (1 << order);
+	}
 
-	return page + (pageblocks_stride * pageblock_nr_pages);
+	return page + pageblock_nr_pages;
 }
 
 /* Checks if this range of memory is likely to be hot-removable. */

@@ -49,6 +49,7 @@ static inline void callchain_init(struct
 	INIT_LIST_HEAD(&node->children);
 	INIT_LIST_HEAD(&node->val);
 
+	node->children_hit = 0;
 	node->parent = NULL;
 	node->hit = 0;
 }

@@ -445,7 +445,7 @@ static void p54_rx_frame_sent(struct p54
 	}
 
 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
-	     (!payload->status))
+	     !(payload->status & P54_TX_FAILED))
 		info->flags |= IEEE80211_TX_STAT_ACK;
 	if (payload->status & P54_TX_PSM_CANCELLED)
 		info->flags |= IEEE80211_TX_STAT_TX_FILTERED;

@@ -1288,6 +1288,10 @@ ath5k_txbuf_setup(struct ath5k_softc *sc
 			PCI_DMA_TODEVICE);
 
 	rate = ieee80211_get_tx_rate(sc->hw, info);
+	if (!rate) {
+		ret = -EINVAL;
+		goto err_unmap;
+	}
 
 	if (info->flags & IEEE80211_TX_CTL_NO_ACK)
 		flags |= AR5K_TXDESC_NOACK;

@@ -1358,6 +1358,9 @@ int cfg80211_wext_giwessid(struct net_de
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 
+	data->flags = 0;
+	data->length = 0;
+
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_ADHOC:
 		return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);

@@ -854,6 +854,22 @@ static int ioctl_standard_iw_point(struc
 		}
 	}
 
+	if (IW_IS_GET(cmd) && !(descr->flags & IW_DESCR_FLAG_NOMAX)) {
+		/*
+		 * If this is a GET, but not NOMAX, it means that the extra
+		 * data is not bounded by userspace, but by max_tokens. Thus
+		 * set the length to max_tokens. This matches the extra data
+		 * allocation.
+		 * The driver should fill it with the number of tokens it
+		 * provided, and it may check iwp->length rather than having
+		 * knowledge of max_tokens. If the driver doesn't change the
+		 * iwp->length, this ioctl just copies back max_token tokens
+		 * filled with zeroes. Hopefully the driver isn't claiming
+		 * them to be valid data.
+		 */
+		iwp->length = descr->max_tokens;
+	}
+
 	err = handler(dev, info, (union iwreq_data *) iwp, extra);
 
 	iwp->length += essid_compat;

@@ -655,7 +655,7 @@ void restore_sched_clock_state(void)
 
 	local_irq_save(flags);
 
-	get_cpu_var(cyc2ns_offset) = 0;
+	__get_cpu_var(cyc2ns_offset) = 0;
 	offset = cyc2ns_suspend - sched_clock();
 
 	for_each_possible_cpu(cpu)

@@ -198,7 +198,7 @@ ptr_to_compat(void __user *uptr)
 }
 
 static __inline__ void __user *
-compat_alloc_user_space (long len)
+arch_compat_alloc_user_space (long len)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);

@@ -144,7 +144,7 @@ static inline compat_uptr_t ptr_to_compa
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = (struct pt_regs *)
 		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;

@@ -146,7 +146,7 @@ static inline compat_uptr_t ptr_to_compa
 	return (u32)(unsigned long)uptr;
 }
 
-static __inline__ void __user *compat_alloc_user_space(long len)
+static __inline__ void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = &current->thread.regs;
 	return (void __user *)regs->gr[30];

@@ -133,7 +133,7 @@ static inline compat_uptr_t ptr_to_compa
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = current->thread.regs;
 	unsigned long usp = regs->gpr[1];

@@ -180,7 +180,7 @@ static inline int is_compat_task(void)
 
 #endif
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	unsigned long stack;
 

@@ -166,7 +166,7 @@ static inline compat_uptr_t ptr_to_compa
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = current_thread_info()->kregs;
 	unsigned long usp = regs->u_regs[UREG_I6];

@@ -204,7 +204,7 @@ static inline compat_uptr_t ptr_to_compa
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return (void __user *)regs->sp - len;

@@ -309,5 +309,7 @@ asmlinkage long compat_sys_newfstatat(un
 asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
 				  int flags, int mode);
 
+extern void __user *compat_alloc_user_space(unsigned long len);
+
 #endif /* CONFIG_COMPAT */
 #endif /* _LINUX_COMPAT_H */

@@ -25,6 +25,7 @@
 #include <linux/posix-timers.h>
 #include <linux/times.h>
 #include <linux/ptrace.h>
+#include <linux/module.h>
 
 #include <asm/uaccess.h>
 

@@ -1136,3 +1137,24 @@ compat_sys_sysinfo(struct compat_sysinfo
 
 	return 0;
 }
+
+/*
+ * Allocate user-space memory for the duration of a single system call,
+ * in order to marshall parameters inside a compat thunk.
+ */
+void __user *compat_alloc_user_space(unsigned long len)
+{
+	void __user *ptr;
+
+	/* If len would occupy more than half of the entire compat space... */
+	if (unlikely(len > (((compat_uptr_t)~0) >> 1)))
+		return NULL;
+
+	ptr = arch_compat_alloc_user_space(len);
+
+	if (unlikely(!access_ok(VERIFY_WRITE, ptr, len)))
+		return NULL;
+
+	return ptr;
+}
+EXPORT_SYMBOL_GPL(compat_alloc_user_space);