Add 802.11a support configuration
PATCH 1/1 Add 802.11a support configuration
This patch adds ability to configure 802.11a support on wl1271.
The code is not tested enough, this is why marked as EXPERIMENTAL.
--- drivers/net/wireless/wl12xx/Kconfig | 7 +++++++ drivers/net/wireless/wl12xx/wl1271.h | 7 +------ drivers/net/wireless/wl12xx/wl1271_main.c | 8 ++------ 3 files changed, 10 insertions(+), 12 deletions(-)
drivers/net/wireless/wl12xx/Kconfig +7 -0
@@ -52,6 +52,13 @@ config WL1271 If you choose to build a module, it'll be called wl1271. Say N if unsure. +config WL1271_80211A + bool "TI wl1271 802.11a support (EXPERIMENTAL)" + depends on WL1271 && EXPERIMENTAL + default n + ---help--- + This will enable 802.11a support for TI wl1271 chipset. + config WL1271_SPI tristate "TI wl1271 SPI support" depends on WL1271 && SPI_MASTER
drivers/net/wireless/wl12xx/wl1271.h +1 -6
@@ -117,11 +117,6 @@ enum {#define WL1271_TX_SECURITY_LO16 (s) ((u16)((s) & 0xffff))#define WL1271_TX_SECURITY_HI32 (s) ((u32)(((s) >> 16) & 0xffffffff)) -/* -* Enable/disable 802.11a support for WL1273 -*/ -#undef WL1271_80211A_ENABLED -#define WL1271_BUSY_WORD_CNT 1#define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32))
@@ -501,7 +496,7 @@ int wl1271_plt_stop(struct wl1271 *wl);static inline bool wl1271_11a_enabled (void ) {/* FIXME: this could be determined based on the NVS-INI file */ -#ifdef WL1271_80211A_ENABLED +#ifdef CONFIG_WL1271_80211A return true;#else return false;
drivers/net/wireless/wl12xx/wl1271_main.c +2 -6
@@ -568,8 +568,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)* around. */ if (fw->size !=sizeof (struct wl1271_nvs_file ) && - (fw->size !=WL1271_INI_LEGACY_NVS_FILE_SIZE || -wl1271_11a_enabled ())) { + (fw->size !=WL1271_INI_LEGACY_NVS_FILE_SIZE )) {wl1271_error ("nvs size is not as expected: %zu != %zu" , fw->size,sizeof (struct wl1271_nvs_file )); ret = -EILSEQ ;
@@ -1559,10 +1558,7 @@ static int wl1271_op_hw_scan(struct ieee80211_hw *hw,if (ret <0 ) goto out; -if (wl1271_11a_enabled ()) - ret =wl1271_scan (hw->priv, ssid, len, req); -else - ret =wl1271_scan (hw->priv, ssid, len, req); + ret =wl1271_scan (hw->priv, ssid, len, req);wl1271_ps_elp_sleep (wl);
Signature · 1 line
1.7.0.4
Hi Gery,
Quoted 7 lines · ext Gery Kahn
This patch adds ability to configure 802.11a support on wl1271.
The code is not tested enough, this is why marked as EXPERIMENTAL.
Signed-off-by Gery Kahn <[email protected]>---
Sorry for not answering your previous email. I read it and was going to reply to it later, but it got flooded down my inbox.
We already have a implemented a mechanism to decide whether to use 11a or not at runtime. It is still not upstream because I haven't been able to test our forward-ports. Now I got a beagle board with wl1271 and I'll be able to test the upstream kernel and will submit everything after I have tested.
Sorry for the trouble, but I have to NACK this.
Signature · 2 lines
Cheers, Luca.