liburi-perl: fix SRC_URI
PATCH 1/1 liburi-perl: fix SRC_URI
--- recipes/perl/liburi-perl_1.52.bb | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
recipes/perl/liburi-perl_1.52.bb +2 -2
@@ -2,9 +2,9 @@ DESCRIPTION = "Manipulates and accesses URI strings" SECTION = "libs" LICENSE = "Artistic|GPL" #RDEPENDS_${PN} += " libmime-base64-perl libnet-perl" -PR = "r3" +PR = "r4" -SRC_URI = "http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-${PV}.tar.gz" +SRC_URI = "http://cpan.yimg.com/modules/by-authors/id/GAAS/URI-${PV}.tar.gz" S = "${WORKDIR}/URI-${PV}"
Signature · 1 line
1.6.3.3
PATCH 1/1 gs: unbreak recipe
* this recipe is actually broken as tools used during compilation on the host are compiled for the target and thus can't be executed.
* tested on armv5te
--- recipes/gs/gs/unix-aux.mak | 101 ++++++++++++++++++++++++++++++++++++++++++++ recipes/gs/gs_8.64.bb | 41 ++++++++++++++++- 2 files changed, 139 insertions(+), 3 deletions(-) create mode 100644 recipes/gs/gs/unix-aux.mak
recipes/gs/gs/unix-aux.mak new file +101 -0
@@ -0,0 +1,101 @@ +# Copyright (C) 2001-2006 Artifex Software, Inc. +# All Rights Reserved. +# +# This software is provided AS-IS with no warranty, either express or +# implied. +# +# This software is distributed under license and may not be copied, modified +# or distributed except as expressly authorized under the terms of that +# license. Refer to licensing information at http://www.artifex.com/ +# or contact Artifex Software, Inc., 7 Mt. Lassen Drive - Suite A-134, +# San Rafael, CA 94903, U.S.A., +1(415)492-9861, for further information. +# +# $Id: unix-aux.mak 9334 2009-01-08 09:17:18Z ghostgum $ +# Partial makefile common to all Unix configurations. +# This makefile contains the build rules for the auxiliary programs such as +# echogs, and the 'platform' modules. + +# Define the name of this makefile. +UNIX_AUX_MAK=$(GLSRC)unix-aux.mak + +# -------------------------------- Library -------------------------------- # + +## The Unix platforms + +# We have to include a test for the existence of sys/time.h, +# because some System V platforms don't have it. + +# Unix platforms other than System V, and also System V Release 4 +# (SVR4) platforms. +unix__=$(GLOBJ)gp_getnv.$(OBJ) $(GLOBJ)gp_upapr.$(OBJ) $(GLOBJ)gp_unix.$(OBJ) $(GLOBJ)gp_unifs.$(OBJ) $(GLOBJ)gp_unifn.$(OBJ) $(GLOBJ)gp_stdia.$(OBJ) $(GLOBJ)gp_unix_cache.$(OBJ) +$(GLGEN)unix_.dev: $(unix__) $(GLD)nosync.dev $(GLD)smd5.dev + $(SETMOD) $(GLGEN)unix_ $(unix__) -include $(GLD)nosync + $(ADDMOD) $(GLGEN)unix_ -include $(GLD)smd5 + +$(GLOBJ)gp_unix.$(OBJ): $(GLSRC)gp_unix.c $(AK)\ + $(pipe__h) $(string__h) $(time__h)\ + $(gx_h) $(gsexit_h) $(gp_h) + $(GLCC) $(FONTCONFIG_CFLAGS) $(GLO_)gp_unix.$(OBJ) $(C_) $(GLSRC)gp_unix.c + +$(GLOBJ)gp_unix_cache.$(OBJ): $(GLSRC)gp_unix_cache.c $(AK)\ + $(stdio__h) $(string__h) $(time__h) $(gconfigd_h) $(gp_h) $(md5_h) + $(GLCC) $(GLO_)gp_unix_cache.$(OBJ) $(C_) $(GLSRC)gp_unix_cache.c + +# assume all Unix platforms support unbuffered read +$(GLOBJ)gp_stdia.$(OBJ): $(GLSRC)gp_stdia.c $(AK)\ + $(stdio__h) $(time__h) $(unistd__h) $(gx_h) $(gp_h) + $(GLCC) $(GLO_)gp_stdia.$(OBJ) $(C_) $(GLSRC)gp_stdia.c + +# System V platforms other than SVR4, which lack some system calls, +# but have pipes. +sysv__=$(GLOBJ)gp_getnv.$(OBJ) $(GLOBJ)gp_upapr.$(OBJ) $(GLOBJ)gp_unix.$(OBJ) $(GLOBJ)gp_unifs.$(OBJ) $(GLOBJ)gp_unifn.$(OBJ) $(GLOBJ)gp_sysv.$(OBJ) +$(GLGEN)sysv_.dev: $(sysv__) $(GLD)nosync.dev + $(SETMOD) $(GLGEN)sysv_ $(sysv__) -include $(GLD)nosync + +$(GLOBJ)gp_sysv.$(OBJ): $(GLSRC)gp_sysv.c $(stdio__h) $(time__h) $(AK) + $(GLCC) $(GLO_)gp_sysv.$(OBJ) $(C_) $(GLSRC)gp_sysv.c + +# -------------------------- Auxiliary programs --------------------------- # + +#$(ECHOGS_XE): $(GLSRC)echogs.c $(AK) $(stdpre_h) +# $(CCAUX) $(I_)$(GLSRCDIR)$(_I) $(O_)$(ECHOGS_XE) $(GLSRC)echogs.c + +# On the RS/6000 (at least), compiling genarch.c with gcc with -O +# produces a buggy executable. +#$(GENARCH_XE): $(GLSRC)genarch.c $(AK) $(GENARCH_DEPS) +# $(CCAUX) $(I_)$(GLSRCDIR)$(_I) $(O_)$(GENARCH_XE) $(GLSRC)genarch.c + +#$(GENCONF_XE): $(GLSRC)genconf.c $(AK) $(GENCONF_DEPS) +# $(CCAUX) $(I_)$(GLSRCDIR)$(_I) $(O_)$(GENCONF_XE) $(GLSRC)genconf.c + +#$(GENDEV_XE): $(GLSRC)gendev.c $(AK) $(GENDEV_DEPS) +# $(CCAUX) $(I_)$(GLSRCDIR)$(_I) $(O_)$(GENDEV_XE) $(GLSRC)gendev.c + +#$(GENHT_XE): $(GLSRC)genht.c $(AK) $(GENHT_DEPS) +# $(CCAUX) $(GENHT_CFLAGS) $(O_)$(GENHT_XE) $(GLSRC)genht.c + +#$(GENINIT_XE): $(GLSRC)geninit.c $(AK) $(GENINIT_DEPS) +# $(CCAUX) $(I_)$(GLSRCDIR)$(_I) $(O_)$(GENINIT_XE) $(GLSRC)geninit.c + +MKROMFS_OBJS=$(MKROMFS_ZLIB_OBJS) $(GLOBJ)gscdefs.$(OBJ) $(GLOBJ)gsmisc.$(OBJ) \ + $(GLOBJ)gpmisc.$(OBJ) $(GLOBJ)gslibctx.$(OBJ) $(GLOBJ)gp_getnv.$(OBJ) \ + $(GLOBJ)gp_unix.$(OBJ) $(GLOBJ)gp_unifs.$(OBJ) $(GLOBJ)gp_unifn.$(OBJ) \ + $(GLOBJ)gp_stdia.$(OBJ) $(GLOBJ)gsutil.$(OBJ) + +#$(MKROMFS_XE): $(GLSRC)mkromfs.c $(MKROMFS_COMMON_DEPS) $(MKROMFS_OBJS) +# $(CCAUX) $(GENOPT) $(CFLAGS) $(I_)$(GLSRCDIR)$(_I) $(I_)$(GLOBJ)$(_I) $(I_)$(ZSRCDIR)$(_I) $(GLSRC)mkromfs.c $(O_)$(MKROMFS_XE) $(MKROMFS_OBJS) -lm $(EXTRALIBS) + +# Query the environment to construct gconfig_.h. +# The "else true;" is required because Ultrix's implementation of sh -e +# terminates execution of a command if any error occurs, even if the command +# traps the error with ||. +INCLUDE=/usr/include +$(gconfig__h): $(UNIX_AUX_MAK) $(ECHOGS_XE) + $(ECHOGS_XE) -w $(gconfig__h) -x 2f2a -s This file was generated automatically by unix-aux.mak. -s -x 2a2f + if ( test -f $(INCLUDE)/dirent.h ); then $(ECHOGS_XE) -a $(gconfig__h) -x 23 define HAVE_DIRENT_H; else true; fi + if ( test -f $(INCLUDE)/ndir.h ); then $(ECHOGS_XE) -a $(gconfig__h) -x 23 define HAVE_NDIR_H; else true; fi + if ( test -f $(INCLUDE)/sys/dir.h ); then $(ECHOGS_XE) -a $(gconfig__h) -x 23 define HAVE_SYS_DIR_H; else true; fi + if ( test -f $(INCLUDE)/sys/ndir.h ); then $(ECHOGS_XE) -a $(gconfig__h) -x 23 define HAVE_SYS_NDIR_H; else true; fi + if ( test -f $(INCLUDE)/sys/time.h ); then $(ECHOGS_XE) -a $(gconfig__h) -x 23 define HAVE_SYS_TIME_H; else true; fi + if ( test -f $(INCLUDE)/sys/times.h ); then $(ECHOGS_XE) -a $(gconfig__h) -x 23 define HAVE_SYS_TIMES_H; else true; fi + if ( test -f $(JSRCDIR)/jmemsys.h); then true; else $(ECHOGS_XE) -a $(gconfig__h) -x 23 define DONT_HAVE_JMEMSYS_H; fi
recipes/gs/gs_8.64.bb +38 -3
80 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH 1/1 apache2: unbreak recipe
* tested on armv5te / angstrom
--- recipes/apache2/apache2_2.2.14.bb | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-)
recipes/apache2/apache2_2.2.14.bb +6 -1
@@ -1,6 +1,6 @@ SECTION = "net" DESCRIPTION = "The apache v2 web server" -DEPENDS = "apache2-native openssl expat pcre" +DEPENDS = "libtool-native apache2-native openssl expat pcre" RDEPENDS_${PN} += "openssl" PR = "r2"
@@ -89,6 +89,11 @@ EXTRA_OECONF = "--enable-ssl \ # # here we over-ride the autotools provided do_configure. # + +do_configure_prepend() { + sed -e 's,libtool libtool15,${TARGET_PREFIX}libtool libtool115,' -i ${S}/srclib/apr/build/buildcheck.sh +} + do_configure() { ( cd srclib/apr; ./buildconf ) oe_runconf
Signature · 1 line
1.6.3.3
PATCH 1/1 ppp: fix poff
* the pid file contains several lines which breaks poff, even if only one pppd is running
753
ppp0
753
pppd version 2.4.5
* by using pidoff to kill pppd this script works again
--- recipes/ppp/files/poff | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
recipes/ppp/files/poff +1 -0
@@ -2,6 +2,7 @@ # Lets see how many pppds are running.... set -- `cat /var/run/ppp*.pid 2>/dev/null` +set -- `pidof pppd` case $# in 0) # pppd only creates a pid file once ppp is up, so let's try killing pppd
Signature · 1 line
1.6.3.3
PATCH 1/1 cups: add version 1.4.4
* libusb support is enabled in this recipe
* DEFAULT_PREFERENCE = "-1" as previous recipe didn't enable this
--- recipes/cups/cups-1.4.4/configure.patch | 117 ++++++++++++++++++++ recipes/cups/cups-1.4.4/skip_tools.patch | 51 +++++++++ .../cups/cups-1.4.4/use_echo_only_in_init.patch | 11 ++ recipes/cups/cups_1.4.4.bb | 17 +++ 4 files changed, 196 insertions(+), 0 deletions(-) create mode 100644 recipes/cups/cups-1.4.4/configure.patch create mode 100644 recipes/cups/cups-1.4.4/skip_tools.patch create mode 100644 recipes/cups/cups-1.4.4/use_echo_only_in_init.patch create mode 100644 recipes/cups/cups_1.4.4.bb
recipes/cups/cups-1.4.4/configure.patch new file +117 -0
@@ -0,0 +1,117 @@ +--- cups-1.4.3/configure.orig 2010-04-08 11:14:19.092296014 +0200 ++++ cups-1.4.3/configure 2010-04-08 11:19:02.661417938 +0200 +@@ -10940,114 +10940,6 @@ + OPTIM="-fPIC $OPTIM" + fi + +- # The -fstack-protector option is available with some versions of +- # GCC and adds "stack canaries" which detect when the return address +- # has been overwritten, preventing many types of exploit attacks. +- { echo "$as_me:$LINENO: checking if GCC supports -fstack-protector" >&5 +-echo $ECHO_N "checking if GCC supports -fstack-protector... $ECHO_C" >&6; } +- OLDCFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -fstack-protector" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && +- $as_test_x conftest$ac_exeext; then +- OPTIM="$OPTIM -fstack-protector" +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- CFLAGS="$OLDCFLAGS" +- +- # The -pie option is available with some versions of GCC and adds +- # randomization of addresses, which avoids another class of exploits +- # that depend on a fixed address for common functions. +- { echo "$as_me:$LINENO: checking if GCC supports -pie" >&5 +-echo $ECHO_N "checking if GCC supports -pie... $ECHO_C" >&6; } +- OLDCFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -pie -fPIE" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- PIEFLAGS="-pie -fPIE" +- { echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6; } +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- { echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6; } +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- CFLAGS="$OLDCFLAGS" +- + if test "x$with_optim" = x; then + # Add useful warning options for tracking down problems... + OPTIM="-Wall -Wno-format-y2k $OPTIM"
recipes/cups/cups-1.4.4/skip_tools.patch new file +51 -0
51 lines not on this page · raw message
recipes/cups/cups-1.4.4/use_echo_only_in_init.patch new file +11 -0
@@ -0,0 +1,11 @@ +--- a/init/cups.sh.in.orig 2008-10-04 16:50:46.000000000 -0300 ++++ b/init/cups.sh.in 2008-10-04 16:51:39.000000000 -0300 +@@ -68,7 +68,7 @@ + ECHO_ERROR=: + ;; + +- Linux*) ++ DISABLELinux*) + IS_ON=/bin/true + if test -f /etc/init.d/functions; then + . /etc/init.d/functions
recipes/cups/cups_1.4.4.bb new file +17 -0
@@ -0,0 +1,17 @@ +require cups14.inc + +SRC_URI += " \ + file://use_echo_only_in_init.patch \ + file://skip_tools.patch \ + file://configure.patch \ + " + +SRC_URI[archive.md5sum] = "8776403ad60fea9e85eab9c04d88560d" +SRC_URI[archive.sha256sum] = "d25ffa35add3abeeec0eba60be2cffc89425b649c64ef3a73dfc724683a59aa3" + +PR = "r1" + +DEFAULT_PREFERENCE = "-1" +DEPENDS += " libusb " +EXTRA_OECONF += " --disable-gssapi --disable-largefile --enable-debug --disable-relro --enable-libusb" +CONFFILES_${PN} += "${sysconfdir}/cups/cupsd.conf"
Signature · 1 line
1.6.3.3
PATCH 1/1 ppp: add version 2.4.5
* tested on armv5te with RTC and GPRS
* DEFAULT_PREFERENCE = "-1" for the moment until it's better tested
--- recipes/ppp/ppp-2.4.5/cifdefroute.patch | 322 ++++ recipes/ppp/ppp-2.4.5/enable-ipv6.patch | 11 + recipes/ppp/ppp-2.4.5/ldflags.patch | 48 + .../makefile-remove-hard-usr-reference.patch | 28 + recipes/ppp/ppp-2.4.5/makefile.patch | 86 ++ .../ppp/ppp-2.4.5/ppp-2.4.4-mppe-mppc.1.1.patch | 1567 ++++++++++++++++++++ recipes/ppp/ppp-2.4.5/pppd-resolv-varrun.patch | 43 + recipes/ppp/ppp-2.4.5/pppoatm-makefile.patch | 7 + recipes/ppp/ppp_2.4.5.bb | 82 + 9 files changed, 2194 insertions(+), 0 deletions(-) create mode 100644 recipes/ppp/ppp-2.4.5/cifdefroute.patch create mode 100644 recipes/ppp/ppp-2.4.5/enable-ipv6.patch create mode 100644 recipes/ppp/ppp-2.4.5/ldflags.patch create mode 100644 recipes/ppp/ppp-2.4.5/makefile-remove-hard-usr-reference.patch create mode 100644 recipes/ppp/ppp-2.4.5/makefile.patch create mode 100644 recipes/ppp/ppp-2.4.5/ppp-2.4.4-mppe-mppc.1.1.patch create mode 100644 recipes/ppp/ppp-2.4.5/pppd-resolv-varrun.patch create mode 100644 recipes/ppp/ppp-2.4.5/pppoatm-makefile.patch create mode 100644 recipes/ppp/ppp_2.4.5.bb
recipes/ppp/ppp-2.4.5/cifdefroute.patch new file +322 -0
@@ -0,0 +1,322 @@ + Add cifdefroute patch from Debian / SuSE to implement replacedefaultroute + + http://packages.debian.org/source/etch/ppp + + Debian source package for ppp 2.4.4rel-8 + + zcat http://ftp.de.debian.org/debian/pool/main/p/ppp/ppp_2.4.4rel-8.diff.gz | + patch -p0, then look for debian/patches/cifdefroute.diff + +diff --git a/pppd/ipcp.c b/pppd/ipcp.c +index 5962c47..e6f7e2a 100644 +--- a/pppd/ipcp.c ++++ b/pppd/ipcp.c +@@ -197,6 +197,14 @@ static option_t ipcp_option_list[] = { + "disable defaultroute option", OPT_ALIAS | OPT_A2CLR, + &ipcp_wantoptions[0].default_route }, + ++ { "replacedefaultroute", o_bool, ++ &ipcp_wantoptions[0].replace_default_route, ++ "Replace default route", 1 ++ }, ++ { "noreplacedefaultroute", o_bool, ++ &ipcp_allowoptions[0].replace_default_route, ++ "Never replace default route", OPT_A2COPY, ++ &ipcp_wantoptions[0].replace_default_route }, + { "proxyarp", o_bool, &ipcp_wantoptions[0].proxy_arp, + "Add proxy ARP entry", OPT_ENABLE|1, &ipcp_allowoptions[0].proxy_arp }, + { "noproxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp, +@@ -263,7 +271,7 @@ struct protent ipcp_protent = { + ip_active_pkt + }; + +-static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t)); ++static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t, bool)); + static void ipcp_script __P((char *, int)); /* Run an up/down script */ + static void ipcp_script_done __P((void *)); + +@@ -1660,7 +1668,8 @@ ip_demand_conf(u) + if (!sifnpmode(u, PPP_IP, NPMODE_QUEUE)) + return 0; + if (wo->default_route) +- if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr)) ++ if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr, ++ wo->replace_default_route)) + default_route_set[u] = 1; + if (wo->proxy_arp) + if (sifproxyarp(u, wo->hisaddr)) +@@ -1742,7 +1751,8 @@ ipcp_up(f) + */ + if (demand) { + if (go->ouraddr != wo->ouraddr || ho->hisaddr != wo->hisaddr) { +- ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr); ++ ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr, ++ wo->replace_default_route); + if (go->ouraddr != wo->ouraddr) { + warn("Local IP address changed to %I", go->ouraddr); + script_setenv("OLDIPLOCAL", ip_ntoa(wo->ouraddr), 0); +@@ -1767,7 +1777,8 @@ ipcp_up(f) + + /* assign a default route through the interface if required */ + if (ipcp_wantoptions[f->unit].default_route) +- if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr)) ++ if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr, ++ wo->replace_default_route)) + default_route_set[f->unit] = 1; + + /* Make a proxy ARP entry if requested. */ +@@ -1817,7 +1828,8 @@ ipcp_up(f) + + /* assign a default route through the interface if required */ + if (ipcp_wantoptions[f->unit].default_route) +- if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr)) ++ if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr, ++ wo->replace_default_route)) + default_route_set[f->unit] = 1; + + /* Make a proxy ARP entry if requested. */ +@@ -1894,7 +1906,7 @@ ipcp_down(f) + sifnpmode(f->unit, PPP_IP, NPMODE_DROP); + sifdown(f->unit); + ipcp_clear_addrs(f->unit, ipcp_gotoptions[f->unit].ouraddr, +- ipcp_hisoptions[f->unit].hisaddr); ++ ipcp_hisoptions[f->unit].hisaddr, 0); + } + + /* Execute the ip-down script */ +@@ -1910,16 +1922,25 @@ ipcp_down(f) + * proxy arp entries, etc. + */ + static void +-ipcp_clear_addrs(unit, ouraddr, hisaddr) ++ipcp_clear_addrs(unit, ouraddr, hisaddr, replacedefaultroute) + int unit; + u_int32_t ouraddr; /* local address */ + u_int32_t hisaddr; /* remote address */ ++ bool replacedefaultroute; + { + if (proxy_arp_set[unit]) { + cifproxyarp(unit, hisaddr); + proxy_arp_set[unit] = 0; + } +- if (default_route_set[unit]) { ++ /* If replacedefaultroute, sifdefaultroute will be called soon ++ * with replacedefaultroute set and that will overwrite the current ++ * default route. This is the case only when doing demand, otherwise ++ * during demand, this cifdefaultroute would restore the old default ++ * route which is not what we want in this case. In the non-demand ++ * case, we'll delete the default route and restore the old if there ++ * is one saved by an sifdefaultroute with replacedefaultroute. ++ */ ++ if (!replacedefaultroute && default_route_set[unit]) { + cifdefaultroute(unit, ouraddr, hisaddr); + default_route_set[unit] = 0; + } +diff --git a/pppd/ipcp.h b/pppd/ipcp.h +index 6cf14c9..7ecfa79 100644 +--- a/pppd/ipcp.h ++++ b/pppd/ipcp.h +@@ -70,6 +70,7 @@ typedef struct ipcp_options { + bool old_addrs; /* Use old (IP-Addresses) option? */ + bool req_addr; /* Ask peer to send IP address? */ + bool default_route; /* Assign default route through interface? */ ++ bool replace_default_route; /* Replace default route through interface? */ + bool proxy_arp; /* Make proxy ARP entry for peer? */ + bool neg_vj; /* Van Jacobson Compression? */ + bool old_vj; /* use old (short) form of VJ option? */ +diff --git a/pppd/pppd.8 b/pppd/pppd.8 +index 5f82469..222fa30 100644 +--- a/pppd/pppd.8 ++++ b/pppd/pppd.8 +@@ -121,6 +121,11 @@ the gateway, when IPCP negotiation is successfully completed. + This entry is removed when the PPP connection is broken. This option + is privileged if the \fInodefaultroute\fR option has been specified. + .TP ++.B replacedefaultroute ++This option is a flag to the defaultroute option. If defaultroute is ++set and this flag is also set, pppd replaces an existing default route ++with the new default route. ++.TP + .B disconnect \fIscript + Execute the command specified by \fIscript\fR, by passing it to a + shell, after +@@ -706,7 +711,12 @@ disable both forms of hardware flow control. + .TP + .B nodefaultroute + Disable the \fIdefaultroute\fR option. The system administrator who +-wishes to prevent users from creating default routes with pppd ++wishes to prevent users from adding a default route with pppd ++can do so by placing this option in the /etc/ppp/options file. ++.TP ++.B noreplacedefaultroute ++Disable the \fIreplacedefaultroute\fR option. The system administrator who ++wishes to prevent users from replacing a default route with pppd + can do so by placing this option in the /etc/ppp/options file. + .TP + .B nodeflate +diff --git a/pppd/pppd.h b/pppd/pppd.h +index f43a039..feff5e6 100644 +--- a/pppd/pppd.h ++++ b/pppd/pppd.h +@@ -642,7 +642,7 @@ int sif6addr __P((int, eui64_t, eui64_t)); + int cif6addr __P((int, eui64_t, eui64_t)); + /* Remove an IPv6 address from i/f */ + #endif +-int sifdefaultroute __P((int, u_int32_t, u_int32_t)); ++int sifdefaultroute __P((int, u_int32_t, u_int32_t, bool replace_default_rt)); + /* Create default route through i/f */ + int cifdefaultroute __P((int, u_int32_t, u_int32_t)); + /* Delete default route through i/f */ +diff --git a/pppd/sys-linux.c b/pppd/sys-linux.c +index e23315a..712582d 100644 +--- a/pppd/sys-linux.c ++++ b/pppd/sys-linux.c +@@ -206,6 +206,8 @@ static unsigned char inbuf[512]; /* buffer for chars read from loopback */ + + static int if_is_up; /* Interface has been marked up */ + static int have_default_route; /* Gateway for default route added */ ++static struct rtentry old_def_rt; /* Old default route */ ++static int default_rt_repl_rest; /* replace and restore old default rt */ + static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */ + static char proxy_arp_dev[16]; /* Device for proxy arp entry */ + static u_int32_t our_old_addr; /* for detecting address changes */ +@@ -1513,6 +1515,9 @@ static int read_route_table(struct rtentry *rt) + p = NULL; + } + ++ SET_SA_FAMILY (rt->rt_dst, AF_INET); ++ SET_SA_FAMILY (rt->rt_gateway, AF_INET); ++ + SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16); + SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16); + SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16); +@@ -1582,20 +1587,51 @@ int have_route_to(u_int32_t addr) + /******************************************************************** + * + * sifdefaultroute - assign a default route through the address given. +- */ +- +-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway) +-{ +- struct rtentry rt; +- +- if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) { +- if (rt.rt_flags & RTF_GATEWAY) +- error("not replacing existing default route via %I", +- SIN_ADDR(rt.rt_gateway)); +- else ++ * ++ * If the global default_rt_repl_rest flag is set, then this function ++ * already replaced the original system defaultroute with some other ++ * route and it should just replace the current defaultroute with ++ * another one, without saving the current route. Use: demand mode, ++ * when pppd sets first a defaultroute it it's temporary ppp0 addresses ++ * and then changes the temporary addresses to the addresses for the real ++ * ppp connection when it has come up. ++ */ ++ ++int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway, bool replace) ++{ ++ struct rtentry rt, tmp_rt; ++ struct rtentry *del_rt = NULL; ++ ++ if (default_rt_repl_rest) { ++ /* We have already reclaced the original defaultroute, if we ++ are called again, we will delete the current default route ++ and set the new default route in this function. ++ - this is normally only the case the doing demand: */ ++ if (defaultroute_exists(&tmp_rt)) ++ del_rt = &tmp_rt; ++ } else if (defaultroute_exists(&old_def_rt) && ++ strcmp(old_def_rt.rt_dev, ifname) != 0) { ++ /* We did not yet replace an existing default route, let's ++ check if we should save and replace a default route: */ ++ if (old_def_rt.rt_flags & RTF_GATEWAY) { ++ if (!replace) { ++ error("not replacing existing default route via %I", ++ SIN_ADDR(old_def_rt.rt_gateway)); ++ return 0; ++ } else { ++ /* we need to copy rt_dev because we need it permanent too: */ ++ char *tmp_dev = malloc(strlen(old_def_rt.rt_dev) + 1); ++ strcpy(tmp_dev, old_def_rt.rt_dev); ++ old_def_rt.rt_dev = tmp_dev; ++ ++ notice("replacing old default route to %s [%I]", ++ old_def_rt.rt_dev, SIN_ADDR(old_def_rt.rt_gateway)); ++ default_rt_repl_rest = 1; ++ del_rt = &old_def_rt; ++ } ++ } else + error("not replacing existing default route through %s", +- rt.rt_dev); +- return 0; ++ old_def_rt.rt_dev); + } + + memset (&rt, 0, sizeof (rt)); +@@ -1610,10 +1646,16 @@ int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway) + + rt.rt_flags = RTF_UP; + if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) { +- if ( ! ok_error ( errno )) ++ if (!ok_error(errno)) + error("default route ioctl(SIOCADDRT): %m"); + return 0; + } ++ if (default_rt_repl_rest && del_rt) ++ if (ioctl(sock_fd, SIOCDELRT, del_rt) < 0) { ++ if (!ok_error(errno)) ++ error("del old default route ioctl(SIOCDELRT): %m"); ++ return 0; ++ } + + have_default_route = 1; + return 1; +@@ -1642,11 +1684,21 @@ int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway) + rt.rt_flags = RTF_UP; + if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) { + if (still_ppp()) { +- if ( ! ok_error ( errno )) ++ if (!ok_error(errno)) + error("default route ioctl(SIOCDELRT): %m"); + return 0; + } + } ++ if (default_rt_repl_rest) { ++ notice("restoring old default route to %s [%I]", ++ old_def_rt.rt_dev, SIN_ADDR(old_def_rt.rt_gateway)); ++ if (ioctl(sock_fd, SIOCADDRT, &old_def_rt) < 0) { ++ if (!ok_error(errno)) ++ error("restore default route ioctl(SIOCADDRT): %m"); ++ return 0; ++ } ++ default_rt_repl_rest = 0; ++ } + + return 1; + } +diff --git a/pppd/sys-solaris.c b/pppd/sys-solaris.c +index add4423..91677fe 100644 +--- a/pppd/sys-solaris.c ++++ b/pppd/sys-solaris.c +@@ -2036,12 +2036,18 @@ cifaddr(u, o, h) + * sifdefaultroute - assign a default route through the address given. + */ + int +-sifdefaultroute(u, l, g) ++sifdefaultroute(u, l, g, replace) + int u; + u_int32_t l, g; ++ bool replace; + { + struct rtentry rt; + ++ if (replace) { ++ error("replacedefaultroute not supported on this platform"); ++ return 0; ++ } ++ + #if defined(__USLC__) + g = l; /* use the local address as gateway */ + #endif
recipes/ppp/ppp-2.4.5/enable-ipv6.patch new file +11 -0
@@ -0,0 +1,11 @@ +--- ppp-2.4.3/pppd/Makefile.linux.orig 2005-10-28 21:07:40.396359250 +0100 ++++ ppp-2.4.3/pppd/Makefile.linux 2005-10-28 21:07:54.217223000 +0100 +@@ -62,7 +62,7 @@ + + HAS_SHADOW=y + #USE_PAM=y +-#HAVE_INET6=y ++HAVE_INET6=y + + # Enable plugins + PLUGIN=y
recipes/ppp/ppp-2.4.5/ldflags.patch new file +48 -0
48 lines not on this page · raw message
recipes/ppp/ppp-2.4.5/makefile-remove-hard-usr-reference.patch new file +28 -0
@@ -0,0 +1,28 @@ +--- ppp-2.4.4/pppd/Makefile.linux.orig 2009-08-24 14:28:02.000000000 -0400 ++++ ppp-2.4.4/pppd/Makefile.linux 2009-08-24 14:42:58.000000000 -0400 +@@ -117,10 +117,10 @@ + #LIBS += -lshadow $(LIBS) + endif + +-ifneq ($(wildcard /usr/include/crypt.h),) ++#ifneq ($(wildcard /usr/include/crypt.h),) + CFLAGS += -DHAVE_CRYPT_H=1 + LIBS += -lcrypt +-endif ++#endif + + ifdef NEEDDES + ifndef USE_CRYPT +@@ -169,10 +169,10 @@ + endif + + ifdef FILTER +-ifneq ($(wildcard /usr/include/pcap-bpf.h),) ++#ifneq ($(wildcard /usr/include/pcap-bpf.h),) + LIBS += -lpcap + CFLAGS += -DPPP_FILTER +-endif ++#endif + endif + + ifdef HAVE_INET6
recipes/ppp/ppp-2.4.5/makefile.patch new file +86 -0
86 lines not on this page · raw message
recipes/ppp/ppp-2.4.5/ppp-2.4.4-mppe-mppc.1.1.patch new file +1567 -0
1,567 lines not on this page · raw message
recipes/ppp/ppp-2.4.5/pppd-resolv-varrun.patch new file +43 -0
43 lines not on this page · raw message
recipes/ppp/ppp-2.4.5/pppoatm-makefile.patch new file +7 -0
@@ -0,0 +1,7 @@ +--- ppp-2.4.3/pppd/plugins/pppoatm/Makefile.linux.orig 2005-10-26 20:38:50.990298750 +0100 ++++ ppp-2.4.3/pppd/plugins/pppoatm/Makefile.linux 2005-10-26 20:39:05.583210750 +0100 +@@ -1,4 +1,3 @@ +-CC = gcc + COPTS = -O2 -g + CFLAGS = $(COPTS) -I../.. -I../../../include -fPIC + LDFLAGS = -shared
recipes/ppp/ppp_2.4.5.bb new file +82 -0
82 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH 1/1 hplip: add 3.10.6
* tested on armv5te using HP PSC inkjet printers
* DEFAULT_PREFERENCE = "-1" until it's more tested
--- recipes/hplip/hplip_3.10.6.bb | 59 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 59 insertions(+), 0 deletions(-) create mode 100644 recipes/hplip/hplip_3.10.6.bb
recipes/hplip/hplip_3.10.6.bb new file +59 -0
@@ -0,0 +1,59 @@ +DESCRIPTION = "HP Linux Imaging and Printing" +LICENSE = "GPL, MIT, BSD" + +# currently, we build a stripped down version that only includes IJS +# and components required to implement a minimal printing system +# for embedded systems. + +SRC_URI = "${SOURCEFORGE_MIRROR}/${PN}/${PN}-${PV}.tar.gz \ + " + +PR = "r1" +DEFAULT_PREFERENCE = "-1" + +inherit autotools + +EXTRA_OECONF = ' \ + BUILD_SYS="" HOST_SYS="" \ + --enable-hpijs-install \ + --disable-network-build \ + --disable-doc-build \ + --disable-pp-build \ + --disable-scan-build \ + --disable-gui-build \ + --disable-fax-build \ + --disable-dbus-build \ + --disable-foomatic-drv-install \ + --disable-foomatic-rip-hplip-install \ + ' + +# needed by python checks in configure +EXTRA_OEMAKE = 'BUILD_SYS="" HOST_SYS=""' + +PACKAGES += "${PN}-ppd ${PN}-cups ${PN}-backend ${PN}-filter" +RDEPENDS_${PN} += "python-syslog python-pprint python-compression python-shell python-xml python-unixadmin python-html python-resource python-terminal" + +# need to snag the debug file or OE will fail on backend package +FILES_${PN}-dbg += "\ + ${libdir}/cups/backend/.debug \ + ${libdir}/python2.6/site-packages/.debug \ + ${libdir}/cups/filter/.debug " + +FILES_${PN}-ppd = "\ + ${datadir}/ppd" + +FILES_${PN}-cups = "\ + ${datadir}/cups" + +FILES_${PN}-backend = "\ + ${libdir}/cups/backend" + +FILES_${PN}-filter = "\ + ${libdir}/cups/filter" + +FILES_${PN} += "\ + ${libdir}/python2.6/site-packages/*.so" + +SRC_URI[md5sum] = "96c36e3baf35e93cf9436a772f0c9ef4" +SRC_URI[sha256sum] = "3ee0e68a613d2b966dcb6df9fd8e074c4c3e590249e61c0d792de3373b84fdeb" +
Signature · 1 line
1.6.3.3
PATCH 1/1 openvpn: add 2.1.3
* tested on armv5te using shared keys setup
* DEFAULT_PREFERENCE = "-1" until it's more tested
--- recipes/openvpn/openvpn_2.1.3.bb | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) create mode 100644 recipes/openvpn/openvpn_2.1.3.bb
recipes/openvpn/openvpn_2.1.3.bb new file +12 -0
@@ -0,0 +1,12 @@ +require openvpn.inc + +PR = "r0" +SRC_URI = "http://openvpn.net/release/${P}.tar.gz \ + file://openvpn" + +# I want openvpn to be able to read password from file (hrw) +EXTRA_OECONF += "--enable-password-save" +DEFAULT_PREFERENCE = "-1" + +SRC_URI[md5sum] = "7486d3e270ba4b033e311d3e022a0ad7" +SRC_URI[sha256sum] = "5185181df2e6043bd667377bc92e36ea5a5bd7600af209654f109b6403ca5b36"
Signature · 1 line
1.6.3.3
PATCH 1/1 gs: add gs-fonts-std
* thsi is one of the font packages gs can use to render ps files
--- recipes/gs/gs-fonts-std_8.11.bb | 28 ++++++++++++++++++++++++++++ 1 files changed, 28 insertions(+), 0 deletions(-) create mode 100644 recipes/gs/gs-fonts-std_8.11.bb
recipes/gs/gs-fonts-std_8.11.bb new file +28 -0
@@ -0,0 +1,28 @@ +DESCRIPTION = "Ghostscript fonts package" +LICENSE = "GPL" +SECTION = "fonts" +HOMEPAGE = "" +PR = "r0" + +SRC_URI = "${SOURCEFORGE_MIRROR}/gs-fonts/ghostscript-fonts-std-${PV}.tar.gz \ + " + +PACKAGE_ARCH = "all" + +SRC_URI[md5sum] = "6865682b095f8c4500c54b285ff05ef6" +SRC_URI[sha256sum] = "0eb6f356119f2e49b2563210852e17f57f9dcc5755f350a69a46a0d641a0c401" + +S = "${WORKDIR}/fonts" + +do_install () { + install -d ${D}${datadir}/fonts + install -m 644 ${S}/*.pfb ${D}${datadir}/fonts + install -m 644 ${S}/*.afm ${D}${datadir}/fonts + install -m 644 ${S}/*.pfm ${D}${datadir}/fonts +} + +PACKAGES += "${PN}-pfb ${PN}-afm ${PN}-pfm" +RDEPENDS_${PN} = "${PN}-pfb ${PN}-afm ${PN}-pfm" +FILES_${PN}-pfb += "${datadir}/fonts/*.pfb" +FILES_${PN}-afm += "${datadir}/fonts/*.afm" +FILES_${PN}-pfm += "${datadir}/fonts/*.pfm"
Signature · 1 line
1.6.3.3
2010/9/21 Eric Bénard <[email protected]>:
Quoted 19 lines
Signed-off-by Eric Bénard <[email protected]>---
recipes/perl/liburi-perl_1.52.bb | 4 ++--1 files changed, 2 insertions(+), 2 deletions(-)recipes/perl/liburi-perl_1.52.bb +0
-0@@ -2,9 +2,9 @@ DESCRIPTION = "Manipulates and accesses URI strings"SECTION = "libs"
LICENSE = "Artistic|GPL"
#RDEPENDS_${PN} += " libmime-base64-perl libnet-perl"recipes/perl/liburi-perl_1.52.bb +2
-2-PR = "r3" +PR = "r4" -SRC_URI = "http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-${PV}.tar.gz" +SRC_URI = "http://cpan.yimg.com/modules/by-authors/id/GAAS/URI-${PV}.tar.gz"
Quoted 3 lines
S = "${WORKDIR}/URI-${PV}"
--
Hm, you're touching an interesting issue here.
First time I tried:
http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-1.52.tar.gz works for me it did not work, 2nd time it did 3rd time it didn't
seems it sometimes redirects to a mirror that is not there or does not have the file
I got as faulty mirror:
http://archive.cs.uu.nl/mirror/CPAN/authors/id/G/GA/GAAS/URI-1.52.tar.gz
cpan.yimg.com is apparently not something that redirects to a mirror so seems a better choice.
Probably we should also do something like this for other recipes that use search.cpan.org
It might also be a good plan to update the recipe to 1.55.
One other thing: The rdepends is commented out.
Accordign to http://deps.cpantesters.org/?module=URI;perl=latest the depends are on
1. MIME::Base64 S B R D Core module Core module
2. ExtUtils::MakeMaker S B R D Core module Core module
Suggest to fix this too.
After considering those fixes
PATCH v2 1/1 liburi-perl: update to 1.5.5
---
v2 : update to 1.55, URL fix is no more necessary
recipes/perl/liburi-perl_1.52.bb | 18 ------------------ recipes/perl/liburi-perl_1.55.bb | 18 ++++++++++++++++++ 2 files changed, 18 insertions(+), 18 deletions(-) delete mode 100644 recipes/perl/liburi-perl_1.52.bb create mode 100644 recipes/perl/liburi-perl_1.55.bb
recipes/perl/liburi-perl_1.52.bb deleted +0 -18
@@ -1,18 +0,0 @@ -DESCRIPTION = "Manipulates and accesses URI strings" -SECTION = "libs" -LICENSE = "Artistic|GPL" -#RDEPENDS_${PN} += " libmime-base64-perl libnet-perl" -PR = "r3" - -SRC_URI = "http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-${PV}.tar.gz" - -S = "${WORKDIR}/URI-${PV}" - -inherit cpan - -BBCLASSEXTEND="native" - -PACKAGE_ARCH = "all" - -SRC_URI[md5sum] = "d6ba96cc3e650af6537675e016e83d3e" -SRC_URI[sha256sum] = "3d325b52c9d1e7aa2fbf67131f1f5ee39964cbe54e864bcfb9808af274a9eb4a"
recipes/perl/liburi-perl_1.55.bb new file +18 -0
@@ -0,0 +1,18 @@ +DESCRIPTION = "Manipulates and accesses URI strings" +SECTION = "libs" +LICENSE = "Artistic|GPL" +RDEPENDS_${PN} += " perl-module-extutils-makemaker perl-module-mime-base64" +PR = "r4" + +SRC_URI = "http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-${PV}.tar.gz" + +S = "${WORKDIR}/URI-${PV}" + +inherit cpan + +BBCLASSEXTEND="native" + +PACKAGE_ARCH = "all" + +SRC_URI[md5sum] = "e66a2ab45da92a2c5f67a495c88999f5" +SRC_URI[sha256sum] = "34ece72deedebfe7d52da90990e49d79e7c62319837def69ed943316bfb74291"
Signature · 1 line
1.6.3.3
Re: [PATCH v2] liburi-perl: update to 1.5.5
2010/9/23 Eric Bénard <[email protected]>:
Quoted 3 lines
Signed-off-by Eric Bénard <[email protected]>---
v2 : update to 1.55, URL fix is no more necessary
Quoted 64 lines
recipes/perl/liburi-perl_1.52.bb | 18 ------------------ recipes/perl/liburi-perl_1.55.bb | 18 ++++++++++++++++++
2 files changed, 18 insertions(+), 18 deletions(-)delete mode 100644 recipes/perl/liburi-perl_1.52.bb create mode 100644 recipes/perl/liburi-perl_1.55.bb
recipes/perl/liburi-perl_1.52.bb deleted +0
-18@@ -1,18 +0,0 @@ -DESCRIPTION = "Manipulates and accesses URI strings" -SECTION = "libs" -LICENSE = "Artistic|GPL" -#RDEPENDS_${PN} += " libmime-base64-perl libnet-perl" -PR = "r3" - -SRC_URI = "http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-${PV}.tar.gz" - -S = "${WORKDIR}/URI-${PV}" - -inherit cpan - -BBCLASSEXTEND="native" - -PACKAGE_ARCH = "all" - -SRC_URI[md5sum] = "d6ba96cc3e650af6537675e016e83d3e" -SRC_URI[sha256sum] = "3d325b52c9d1e7aa2fbf67131f1f5ee39964cbe54e864bcfb9808af274a9eb4a"recipes/perl/liburi-perl_1.55.bb new file +18
-1@@ -0,0 +1,18 @@ +DESCRIPTION = "Manipulates and accesses URI strings" +SECTION = "libs" +LICENSE = "Artistic|GPL" +RDEPENDS_${PN} += " perl-module-extutils-makemaker perl-module-mime-base64" +PR = "r4" + +SRC_URI = "http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/URI-${PV}.tar.gz" + +S = "${WORKDIR}/URI-${PV}" + +inherit cpan + +BBCLASSEXTEND="native" + +PACKAGE_ARCH = "all" + +SRC_URI[md5sum] = "e66a2ab45da92a2c5f67a495c88999f5" +SRC_URI[sha256sum] = "34ece72deedebfe7d52da90990e49d79e7c62319837def69ed943316bfb74291" --1.6.3.3
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel