Skip to contentSkip to conversation

move nand_init after pci_init in arch/powerpc/lib/board.c ?

RFC André Schwarz 2 participants 2 messages Oct 1, 2010

lore
Share & tools
lore
#0 lore raw

Actually I'm trying to implement a simple bitbanged Nand-Flash device connected to a PCI FPGA.

I'm running latest U-Boot on mvBL-M7 board (MPC8343).

Unfortunately nand_init() gets called before pci_init() within arch/powerpc/lib/board.c ?

Is there any possibility to defer nand_init after pci_init ?

To minimize impact we could introduce a second nand_init after pci_init depending on e.g. CONFIG_NAND_LATE_INIT ... of course being mutually exclusive with the first instance.

Regards,
Andr?

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner

#1 lore raw

Dear =?ISO-8859-1?Q?Andr=E9?= Schwarz,

Quoted 6 lines · In message <1285937418.2597.24.camel@swa-m460> you wrote:

Actually I'm trying to implement a simple bitbanged Nand-Flash device connected to a PCI FPGA.

I'm running latest U-Boot on mvBL-M7 board (MPC8343).

Quoted 8 lines

Unfortunately nand_init() gets called before pci_init() within arch/powerpc/lib/board.c ?

Is there any possibility to defer nand_init after pci_init ?

To minimize impact we could introduce a second nand_init after pci_init depending on e.g. CONFIG_NAND_LATE_INIT ... of course being mutually exclusive with the first instance.

Eventuall your board just needs to be added to this #ifdef:

684 #if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
685 /*

 686          * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
 687          * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
 688          * bridge there.
 689          */

690 pci_init ();
691 #endif

If this works for you, then please convert the #ifdef into a feature #ifdef, say "CONFIF_SYS_EARLY_PCI_INIT".

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wenn Du ein' weise Antwort verlangst, Mu?t Du vern?nftig fragen.
                                                -- Goethe, Invektiven