OMAP: DSS2: Overlay Manager LCD2 support in DISPC
Subsystems (3)
v3 cover OMAP: DSS2: Overlay Manager LCD2 support in DISPC
This patch series which incorporates changes in DSS2 to enable omap_dss_device instances to use the new Overlay Manager LCD2 in DISPC.
On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. This channel's video port is a source port for RFBI, DSI2 and DPI. The Primary channel's video port is connected to RFBI and DSI1.
There is a set of regsiters for LCD2 channel similar to the existing LCD channel, like DISPC_CONTROL2, DISPC_DIVISOR2, DISPC_CONFIG2 and so on.
In order to decide which LCD Overlay Manager to configure(LCD/LCD2), there is a need for the omap_dss_device instances to tell the interface drivers(DSI, DPI, RFBI etc) which LCD channel they want to connect to, so that the corresponding registers get configured. Therefore, a new enum omap_channel member is introduced to omap_dss_device.
This design was made keeping in mind the possible addition of more Overlay Managers in future OMAPs, this code is also backward compatible with OMAP3 as omap_dss_device instances in OMAP3 will stick only with OMAP_DSS_CHANNEL_LCD.
This will apply over the set of dss_feature framework patches:
http://www.mail-archive.com/[email protected]/msg34768.html
Archit Taneja (1):
OMAP: DSS2: Add dss_features for omap4 and new overlay manager level
features
Sumit Semwal (3):
OMAP: DSS2: Incorporate Secondary LCD Channel DISPC Registers
OMAP: DSS2: Interface driver changes for Secondary LCD Channel
OMAP: DSS2: Add new Overlay Manager
arch/arm/plat-omap/include/plat/display.h | 7 + drivers/video/omap2/dss/core.c | 2 +- drivers/video/omap2/dss/dispc.c | 627 +++++++++++++++++++---------- drivers/video/omap2/dss/dpi.c | 38 +- drivers/video/omap2/dss/dsi.c | 24 +- drivers/video/omap2/dss/dss.h | 39 ++- drivers/video/omap2/dss/dss_features.c | 39 ++- drivers/video/omap2/dss/dss_features.h | 7 +- drivers/video/omap2/dss/manager.c | 73 +++-- drivers/video/omap2/dss/overlay.c | 14 +- drivers/video/omap2/dss/rfbi.c | 21 +- drivers/video/omap2/dss/sdi.c | 22 +- 12 files changed, 604 insertions(+), 309 deletions(-)
--
Version 3:
- Patches are reworked over dss2 features framework. Number of patches are reduced.
Version 2:
- The DISPC_BASE macro now isn't changed for OMAP4, a future hwmod patch will take care of this dynamically.
- Supported_displays member of manager is now assigned correctly for OMAP2.
- DISPC Registers common to LCD and LCD2 channels are not defined separately, now there is a parameter which differentiates between the 2 channels.
- Secondary LCD manager is now named as lcd2 instead of 2lcd, the patch given in the link below allows DSS2 interpret this correctly.
http://www.mail-archive.com/[email protected]/msg31714.html
Version 1:
http://www.mail-archive.com/[email protected]/msg31458.html
RFC PATCH v3 1/4 OMAP: DSS2: Add dss_features for omap4 and new overlay manager level features
Add support for LCD2 manager through introducing a new has_feature, Initialize a dss_features struct for omap4.
--- drivers/video/omap2/dss/dss_features.c | 39 ++++++++++++++++++++++++++++++- drivers/video/omap2/dss/dss_features.h | 7 +++++- 2 files changed, 43 insertions(+), 3 deletions(-)
drivers/video/omap2/dss/dss_features.c +37 -2
@@ -82,6 +82,18 @@ static const enum omap_display_type omap3_dss_supported_displays[] = { OMAP_DISPLAY_TYPE_VENC, }; +static const enum omap_display_type omap4_dss_supported_displays[] = { +/* OMAP_DSS_CHANNEL_LCD */ +OMAP_DISPLAY_TYPE_DBI |OMAP_DISPLAY_TYPE_DSI , + +/* OMAP_DSS_CHANNEL_DIGIT */ +OMAP_DISPLAY_TYPE_VENC , + +/* OMAP_DSS_CHANNEL_LCD2 */ +OMAP_DISPLAY_TYPE_DPI |OMAP_DISPLAY_TYPE_DBI | +OMAP_DISPLAY_TYPE_DSI , +}; +static const enum omap_color_mode omap2_dss_supported_color_modes[] = {/* OMAP_DSS_GFX */ OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
@@ -127,6 +139,10 @@ static struct omap_dss_features omap2_dss_features = { .reg_fields = omap2_dss_reg_fields, .num_reg_fields = ARRAY_SIZE(omap2_dss_reg_fields), + .has_feature = +FEAT_LCDENABLEPOL |FEAT_LCDENABLESIGNAL | + FEAT_PCKFREEENABLE, + .num_mgrs = 2, .num_ovls = 3, .supported_displays = omap2_dss_supported_displays,
@@ -138,7 +154,9 @@ static struct omap_dss_features omap3_dss_features = { .reg_fields = omap3_dss_reg_fields, .num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields), - .has_feature = FEAT_GLOBAL_ALPHA, + .has_feature = +FEAT_GLOBAL_ALPHA |FEAT_LCDENABLEPOL | + FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE, .num_mgrs = 2, .num_ovls = 3,
@@ -146,6 +164,21 @@ static struct omap_dss_features omap3_dss_features = { .supported_color_modes = omap3_dss_supported_color_modes, }; +/* OMAP4 DSS Features */ +static struct omap_dss_features omap4_dss_features = { + .reg_fields = omap3_dss_reg_fields, + .num_reg_fields =ARRAY_SIZE (omap3_dss_reg_fields), + + .has_feature = +FEAT_GLOBAL_ALPHA |FEAT_MGR_LCD2 | +FEAT_GAMMATABLE , + + .num_mgrs =3 , + .num_ovls =3 , + .supported_displays = omap4_dss_supported_displays, + .supported_color_modes = omap3_dss_supported_color_modes, +}; +/* Functions returning values related to a DSS feature */ int dss_feat_get_num_mgrs (void ) {
@@ -186,6 +219,8 @@ void dss_features_init(void) {if (cpu_is_omap24xx ()) omap_current_dss_features = &omap2_dss_features; -else +else if (cpu_is_omap34xx ()) omap_current_dss_features = &omap3_dss_features; +else + omap_current_dss_features = &omap4_dss_features; }
drivers/video/omap2/dss/dss_features.h +6 -1
@@ -20,13 +20,18 @@#ifndef __OMAP2_DSS_FEATURES_H#define __OMAP2_DSS_FEATURES_H -#define MAX_DSS_MANAGERS 2 +#define MAX_DSS_MANAGERS 3#define MAX_DSS_OVERLAYS 3/* DSS has feature id */ enum dss_feat_id {FEAT_GLOBAL_ALPHA =1 <<0 ,FEAT_GLOBAL_ALPHA_VID1 =1 <<1 , +FEAT_LCDENABLEPOL =1 <<2 , +FEAT_LCDENABLESIGNAL =1 <<3 , +FEAT_PCKFREEENABLE =1 <<4 , +FEAT_MGR_LCD2 =1 <<5 , +FEAT_GAMMATABLE =1 <<6 , };/* DSS register field id */
Signature · 1 line
1.7.0.4
RFC PATCH v3 2/4 OMAP: DSS2: Incorporate Secondary LCD Channel DISPC Registers
In reply to Archit TanejaFrom: Sumit Semwal <[email protected]>
Introduce LCD2 manager and corresponding irq's in display.h. Introduce OMAP4 DISPC Secondary LCD Channel registers and the new enum channel as a parameter in all dispc functions used by interface drivers(dsi, sdi etc) in order to differentiate between the 2 channels.
--- arch/arm/plat-omap/include/plat/display.h | 7 + drivers/video/omap2/dss/dispc.c | 617 +++++++++++++++++++---------- drivers/video/omap2/dss/dss.h | 29 +- 3 files changed, 433 insertions(+), 220 deletions(-)
arch/arm/plat-omap/include/plat/display.h +7 -0
@@ -42,6 +42,10 @@#define DISPC_IRQ_SYNC_LOST (1 << 14)#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15)#define DISPC_IRQ_WAKEUP (1 << 16) +#define DISPC_IRQ_SYNC_LOST_2 (1 << 17) +#define DISPC_IRQ_VSYNC2 (1 << 18) +#define DISPC_IRQ_ACBIAS_COUNT_STAT2 (1 << 21) +#define DISPC_IRQ_FRAMEDONE2 (1 << 22)struct omap_dss_device ;struct omap_overlay_manager ;
@@ -64,6 +68,7 @@ enum omap_plane {enum omap_channel {OMAP_DSS_CHANNEL_LCD =0 ,OMAP_DSS_CHANNEL_DIGIT =1 , +OMAP_DSS_CHANNEL_LCD2 =2 , };enum omap_color_mode {
@@ -142,6 +147,7 @@ enum omap_dss_display_state {enum omap_dss_overlay_managers {OMAP_DSS_OVL_MGR_LCD ,OMAP_DSS_OVL_MGR_TV , +OMAP_DSS_OVL_MGR_LCD2 , };enum omap_dss_rotation_type {
@@ -431,6 +437,7 @@ struct omap_dss_device {struct omap_overlay_manager *manager;enum omap_dss_display_state state; +enum omap_channel channel;/* platform specific */ int (*platform_enable)(struct omap_dss_device *dssdev);
drivers/video/omap2/dss/dispc.c +408 -209
1,134 lines not on this page · raw message
drivers/video/omap2/dss/dss.h +18 -11
@@ -333,9 +333,9 @@ void dispc_disable_sidle(void);void dispc_lcd_enable_signal_polarity (bool act_high);void dispc_lcd_enable_signal (bool enable);void dispc_pck_free_enable (bool enable); -void dispc_enable_fifohandcheck (bool enable); +void dispc_enable_fifohandcheck (enum omap_channel channel,bool enable); -void dispc_set_lcd_size (u16 width,u16 height); +void dispc_set_lcd_size (enum omap_channel channel,u16 width,u16 height);void dispc_set_digit_size (u16 width,u16 height);u32 dispc_get_plane_fifo_size (enum omap_plane plane);void dispc_setup_plane_fifo (enum omap_plane plane,u32 low,u32 high);
@@ -368,9 +368,12 @@ bool dispc_is_channel_enabled(enum omap_channel channel);int dispc_enable_plane (enum omap_plane plane,bool enable);void dispc_enable_replication (enum omap_plane plane,bool enable); -void dispc_set_parallel_interface_mode (enum omap_parallel_interface_mode mode); -void dispc_set_tft_data_lines (u8 data_lines); -void dispc_set_lcd_display_type (enum omap_lcd_display_type type); +void dispc_set_parallel_interface_mode (enum omap_channel channel, +enum omap_parallel_interface_mode mode); +void dispc_set_tft_data_lines (enum omap_channel channel, +u8 data_lines); +void dispc_set_lcd_display_type (enum omap_channel channel, +enum omap_lcd_display_type type);void dispc_set_loadmode (enum omap_dss_load_mode mode);void dispc_set_default_color (enum omap_channel channel,u32 color);
@@ -387,17 +390,21 @@ bool dispc_trans_key_enabled(enum omap_channel ch);bool dispc_alpha_blending_enabled (enum omap_channel ch);bool dispc_lcd_timings_ok (struct omap_video_timings *timings); -void dispc_set_lcd_timings (struct omap_video_timings *timings); +void dispc_set_lcd_timings (enum omap_channel channel, +struct omap_video_timings *timings);unsigned long dispc_fclk_rate (void ); -unsigned long dispc_lclk_rate (void ); -unsigned long dispc_pclk_rate (void ); -void dispc_set_pol_freq (enum omap_panel_config config,u8 acbi,u8 acb); +unsigned long dispc_lclk_rate (enum omap_channel channel); +unsigned long dispc_pclk_rate (enum omap_channel channel); +void dispc_set_pol_freq (enum omap_channel channel, +enum omap_panel_config config,u8 acbi,u8 acb);void dispc_find_clk_divs (bool is_tft,unsigned long req_pck,unsigned long fck,struct dispc_clock_info *cinfo);int dispc_calc_clock_rates (unsigned long dispc_fclk_rate,struct dispc_clock_info *cinfo); -int dispc_set_clock_div (struct dispc_clock_info *cinfo); -int dispc_get_clock_div (struct dispc_clock_info *cinfo); +int dispc_set_clock_div (enum omap_channel channel, +struct dispc_clock_info *cinfo); +int dispc_get_clock_div (enum omap_channel channel, +struct dispc_clock_info *cinfo);/* VENC */
Signature · 1 line
1.7.0.4
RFC PATCH v3 3/4 OMAP: DSS2: Interface driver changes for Secondary LCD Channel
In reply to Archit TanejaFrom: Sumit Semwal <[email protected]>
Make necessary changes in the interface drivers for the dispc functions which have the new enum channel added to them
--- drivers/video/omap2/dss/core.c | 2 +- drivers/video/omap2/dss/dpi.c | 38 +++++++++++++++++++++----------------- drivers/video/omap2/dss/dsi.c | 24 +++++++++++++----------- drivers/video/omap2/dss/dss.h | 8 +++++--- drivers/video/omap2/dss/rfbi.c | 21 ++++++++++++--------- drivers/video/omap2/dss/sdi.c | 22 ++++++++++++---------- 6 files changed, 64 insertions(+), 51 deletions(-)
drivers/video/omap2/dss/core.c +1 -1
@@ -412,7 +412,7 @@ static void dss_debug_dump_clocks(struct seq_file *s)dss_dump_clocks (s);dispc_dump_clocks (s);#ifdef CONFIG_OMAP2_DSS_DSI -dsi_dump_clocks (s); +dsi_dump_clocks (OMAP_DSS_CHANNEL_LCD , s);#endif }
drivers/video/omap2/dss/dpi.c +21 -17
@@ -40,8 +40,9 @@ static struct { } dpi;#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL -static int dpi_set_dsi_clk (bool is_tft,unsigned long pck_req, -unsigned long *fck,int *lck_div,int *pck_div) +static int dpi_set_dsi_clk (enum omap_channel channel,bool is_tft, +unsigned long pck_req,unsigned long *fck,int *lck_div, +int *pck_div) {struct dsi_clock_info dsi_cinfo;struct dispc_clock_info dispc_cinfo;
@@ -58,7 +59,7 @@ static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req,dss_select_dispc_clk_source (DSS_SRC_DSI1_PLL_FCLK ); - r =dispc_set_clock_div (&dispc_cinfo); + r =dispc_set_clock_div (channel, &dispc_cinfo);if (r)return r;
@@ -69,8 +70,9 @@ static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, return 0; }#else -static int dpi_set_dispc_clk (bool is_tft,unsigned long pck_req, -unsigned long *fck,int *lck_div,int *pck_div) +static int dpi_set_dispc_clk (enum omap_channel channel,bool is_tft, +unsigned long pck_req,unsigned long *fck,int *lck_div, +int *pck_div) {struct dss_clock_info dss_cinfo;struct dispc_clock_info dispc_cinfo;
@@ -84,7 +86,7 @@ static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req,if (r)return r; - r =dispc_set_clock_div (&dispc_cinfo); + r =dispc_set_clock_div (channel, &dispc_cinfo);if (r)return r;
@@ -107,17 +109,17 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)dss_clk_enable (DSS_CLK_ICK |DSS_CLK_FCK1 ); -dispc_set_pol_freq (dssdev->panel.config, dssdev->panel.acbi, - dssdev->panel.acb); +dispc_set_pol_freq (dssdev->channel, dssdev->panel.config, + dssdev->panel.acbi, dssdev->panel.acb); is_tft = (dssdev->panel.config &OMAP_DSS_LCD_TFT ) !=0 ;#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL - r =dpi_set_dsi_clk (is_tft, t->pixel_clock *1000 , - &fck, &lck_div, &pck_div); + r =dpi_set_dsi_clk (dssdev->channel, is_tft, + t->pixel_clock *1000 , &fck, &lck_div, &pck_div);#else - r =dpi_set_dispc_clk (is_tft, t->pixel_clock *1000 , - &fck, &lck_div, &pck_div); + r =dpi_set_dispc_clk (dssdev->channel, is_tft, + t->pixel_clock *1000 , &fck, &lck_div, &pck_div);#endif if (r) goto err0;
@@ -132,7 +134,7 @@ static int dpi_set_mode(struct omap_dss_device *dssdev) t->pixel_clock = pck; } -dispc_set_lcd_timings (t); +dispc_set_lcd_timings (dssdev->channel, t); err0:dss_clk_disable (DSS_CLK_ICK |DSS_CLK_FCK1 );
@@ -145,10 +147,12 @@ static int dpi_basic_init(struct omap_dss_device *dssdev) is_tft = (dssdev->panel.config &OMAP_DSS_LCD_TFT ) !=0 ; -dispc_set_parallel_interface_mode (OMAP_DSS_PARALLELMODE_BYPASS ); -dispc_set_lcd_display_type (is_tft ?OMAP_DSS_LCD_DISPLAY_TFT : -OMAP_DSS_LCD_DISPLAY_STN ); -dispc_set_tft_data_lines (dssdev->phy.dpi.data_lines); +dispc_set_parallel_interface_mode (dssdev->channel, +OMAP_DSS_PARALLELMODE_BYPASS ); +dispc_set_lcd_display_type (dssdev->channel, + is_tft ?OMAP_DSS_LCD_DISPLAY_TFT :OMAP_DSS_LCD_DISPLAY_STN ); +dispc_set_tft_data_lines (dssdev->channel, + dssdev->phy.dpi.data_lines);return 0 ; }
drivers/video/omap2/dss/dsi.c +13 -11
@@ -812,7 +812,7 @@ static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo)* with DSS2_FCK source also */ cinfo->highfreq =0 ; }else { - cinfo->clkin =dispc_pclk_rate (); + cinfo->clkin =dispc_pclk_rate (OMAP_DSS_CHANNEL_LCD );if (cinfo->clkin <32000000 ) cinfo->highfreq =0 ;
@@ -1157,7 +1157,7 @@ void dsi_pll_uninit(void)DSSDBG ("PLL uninit done\n" ); } -void dsi_dump_clocks (struct seq_file *s) +void dsi_dump_clocks (enum omap_channel channel,struct seq_file *s) {int clksel;struct dsi_clock_info *cinfo = &dsi.current_cinfo;
@@ -1206,8 +1206,8 @@ void dsi_dump_clocks(struct seq_file *s)seq_printf (s,"VP_CLK\t\t%lu\n" "VP_PCLK\t\t%lu\n" , -dispc_lclk_rate (), -dispc_pclk_rate ()); +dispc_lclk_rate (channel), +dispc_pclk_rate (channel));enable_clocks (0 ); }
@@ -2888,7 +2888,7 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev,if (dssdev->manager->caps &OMAP_DSS_OVL_MGR_CAP_DISPC ) {dss_setup_partial_planes (dssdev, x, y, w, h, enlarge_update_area); -dispc_set_lcd_size (*w, *h); +dispc_set_lcd_size (dssdev->channel, *w, *h); }return 0 ;
@@ -2947,12 +2947,14 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)return r; } -dispc_set_lcd_display_type (OMAP_DSS_LCD_DISPLAY_TFT ); +dispc_set_lcd_display_type (dssdev->channel, +OMAP_DSS_LCD_DISPLAY_TFT ); -dispc_set_parallel_interface_mode (OMAP_DSS_PARALLELMODE_DSI ); -dispc_enable_fifohandcheck (1 ); +dispc_set_parallel_interface_mode (dssdev->channel, +OMAP_DSS_PARALLELMODE_DSI ); +dispc_enable_fifohandcheck (dssdev->channel,1 ); -dispc_set_tft_data_lines (dssdev->ctrl.pixel_size); +dispc_set_tft_data_lines (dssdev->channel, dssdev->ctrl.pixel_size); {struct omap_video_timings timings = {
@@ -2964,7 +2966,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev) .vbp = 0, }; -dispc_set_lcd_timings (&timings); +dispc_set_lcd_timings (dssdev->channel, &timings); }return 0 ;
@@ -3019,7 +3021,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev)return r; } - r =dispc_set_clock_div (&dispc_cinfo); + r =dispc_set_clock_div (dssdev->channel, &dispc_cinfo);if (r) {DSSERR ("Failed to set dispc clocks\n" );return r;
drivers/video/omap2/dss/dss.h +5 -3
@@ -262,7 +262,8 @@ static inline void sdi_exit(void)int dsi_init (struct platform_device *pdev);void dsi_exit (void ); -void dsi_dump_clocks (struct seq_file *s); +void dsi_dump_clocks (enum omap_channel channel, +struct seq_file *s);void dsi_dump_irqs (struct seq_file *s);void dsi_dump_regs (struct seq_file *s);
@@ -431,8 +432,9 @@ void rfbi_dump_regs(struct seq_file *s);int rfbi_configure (int rfbi_module,int bpp,int lines);void rfbi_enable_rfbi (bool enable); -void rfbi_transfer_area (u16 width,u16 height, -void (callback )(void *data),void *data); +void rfbi_transfer_area (struct omap_dss_device *dssdev, +u16 width,u16 height, +void (callback )(void *data),void *data);void rfbi_set_timings (int rfbi_module,struct rfbi_timings *t);unsigned long rfbi_get_max_tx_rate (void );int rfbi_init_display (struct omap_dss_device *display);
drivers/video/omap2/dss/rfbi.c +12 -9
@@ -301,8 +301,8 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, }EXPORT_SYMBOL (omap_rfbi_write_pixels); -void rfbi_transfer_area (u16 width,u16 height, -void (callback )(void *data),void *data) +void rfbi_transfer_area (struct omap_dss_device *dssdev,u16 width, +u16 height,void (*callback)(void *data),void *data) {u32 l;
@@ -311,9 +311,9 @@ void rfbi_transfer_area(u16 width, u16 height,DSSDBG ("rfbi_transfer_area %dx%d\n" , width, height); -dispc_set_lcd_size (width, height); +dispc_set_lcd_size (dssdev->channel, width, height); -dispc_enable_channel (OMAP_DSS_CHANNEL_LCD , true); +dispc_enable_channel (dssdev->channel, true); rfbi.framedone_callback = callback; rfbi.framedone_callback_data = data;
@@ -887,7 +887,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,if (dssdev->manager->caps &OMAP_DSS_OVL_MGR_CAP_DISPC ) {dss_setup_partial_planes (dssdev, x, y, w, h, true); -dispc_set_lcd_size (*w, *h); +dispc_set_lcd_size (dssdev->channel, *w, *h); }return 0 ;
@@ -899,7 +899,7 @@ int omap_rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *), void *data) {if (dssdev->manager->caps &OMAP_DSS_OVL_MGR_CAP_DISPC ) { -rfbi_transfer_area (w, h, callback, data); +rfbi_transfer_area (dssdev, w, h, callback, data); }else {struct omap_overlay *ovl;void __iomem *addr;
@@ -1018,11 +1018,14 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev) goto err1; } -dispc_set_lcd_display_type (OMAP_DSS_LCD_DISPLAY_TFT ); +dispc_set_lcd_display_type (dssdev->channel, +OMAP_DSS_LCD_DISPLAY_TFT ); -dispc_set_parallel_interface_mode (OMAP_DSS_PARALLELMODE_RFBI ); +dispc_set_parallel_interface_mode (dssdev->channel, +OMAP_DSS_PARALLELMODE_RFBI ); -dispc_set_tft_data_lines (dssdev->ctrl.pixel_size); +dispc_set_tft_data_lines (dssdev->channel, + dssdev->ctrl.pixel_size); rfbi_configure(dssdev->phy.rfbi.channel, dssdev->ctrl.pixel_size,
drivers/video/omap2/dss/sdi.c +12 -10
@@ -35,12 +35,14 @@ static struct {struct regulator *vdds_sdi_reg; } sdi; -static void sdi_basic_init (void ) +static void sdi_basic_init (struct omap_dss_device *dssdev) { -dispc_set_parallel_interface_mode (OMAP_DSS_PARALLELMODE_BYPASS ); +dispc_set_parallel_interface_mode (dssdev->channel, +OMAP_DSS_PARALLELMODE_BYPASS ); -dispc_set_lcd_display_type (OMAP_DSS_LCD_DISPLAY_TFT ); -dispc_set_tft_data_lines (24 ); +dispc_set_lcd_display_type (dssdev->channel, +OMAP_DSS_LCD_DISPLAY_TFT ); +dispc_set_tft_data_lines (dssdev->channel,24 );dispc_lcd_enable_signal_polarity (1 ); }
@@ -68,20 +70,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)if (!sdi.skip_init)dss_clk_enable (DSS_CLK_ICK |DSS_CLK_FCK1 ); -sdi_basic_init (); +sdi_basic_init (dssdev);/* 15.5.9.1.2 */ dssdev->panel.config |=OMAP_DSS_LCD_RF |OMAP_DSS_LCD_ONOFF ; -dispc_set_pol_freq (dssdev->panel.config, dssdev->panel.acbi, - dssdev->panel.acb); +dispc_set_pol_freq (dssdev->channel, dssdev->panel.config, + dssdev->panel.acbi, dssdev->panel.acb);if (!sdi.skip_init) { r =dss_calc_clock_div (1 , t->pixel_clock *1000 , &dss_cinfo, &dispc_cinfo); }else { r =dss_get_clock_div (&dss_cinfo); - r =dispc_get_clock_div (&dispc_cinfo); + r =dispc_get_clock_div (dssdev->channel, &dispc_cinfo); }if (r)
@@ -102,13 +104,13 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev) } -dispc_set_lcd_timings (t); +dispc_set_lcd_timings (dssdev->channel, t); r =dss_set_clock_div (&dss_cinfo);if (r) goto err2; - r =dispc_set_clock_div (&dispc_cinfo); + r =dispc_set_clock_div (dssdev->channel, &dispc_cinfo);if (r) goto err2;
Signature · 1 line
1.7.0.4
RFC PATCH v3 4/4 OMAP: DSS2: Add new Overlay Manager
In reply to Archit TanejaFrom: Sumit Semwal <[email protected]>
Add new Overlay Manager in manager.c, make changes needed for secondary lcd channel
--- drivers/video/omap2/dss/dispc.c | 20 +++++----- drivers/video/omap2/dss/dss.h | 2 +- drivers/video/omap2/dss/manager.c | 73 +++++++++++++++++++++++-------------- drivers/video/omap2/dss/overlay.c | 14 ++++++- 4 files changed, 69 insertions(+), 40 deletions(-)
drivers/video/omap2/dss/dispc.c +10 -10
@@ -1593,7 +1593,7 @@ static int _dispc_setup_plane(enum omap_plane plane,bool ilace, enum omap_dss_rotation_type rotation_type, u8 rotation, int mirror, - u8 global_alpha) + u8 global_alpha, enum omap_channel channel) { const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;bool five_taps =0 ;
@@ -1692,8 +1692,8 @@ static int _dispc_setup_plane(enum omap_plane plane, five_taps = height > out_height *2 ;if (!five_taps) { - fclk =calc_fclk (OMAP_DSS_CHANNEL_LCD , width, height, - out_width, out_height); + fclk =calc_fclk (channel, width, height, out_width, + out_height);/* Try 5-tap filter if 3-tap fclk is too high */ if (cpu_is_omap34xx() && height > out_height &&
@@ -1707,9 +1707,8 @@ static int _dispc_setup_plane(enum omap_plane plane, }if (five_taps) - fclk =calc_fclk_five_taps (OMAP_DSS_CHANNEL_LCD , - width, height, out_width, out_height, - color_mode); + fclk =calc_fclk_five_taps (channel, width, height, + out_width, out_height, color_mode);DSSDBG ("required fclk rate = %lu Hz\n" , fclk);DSSDBG ("current fclk rate = %lu Hz\n" ,dispc_fclk_rate ());
@@ -3338,17 +3337,18 @@ int dispc_setup_plane(enum omap_plane plane,enum omap_color_mode color_mode, bool ilace, enum omap_dss_rotation_type rotation_type, - u8 rotation, bool mirror, u8 global_alpha) + u8 rotation, bool mirror, u8 global_alpha, + enum omap_channel channel) { int r = 0;DSSDBG ("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> " -"%dx%d, ilace %d, cmode %x, rot %d, mir %d\n" , +"%dx%d, ilace %d, cmode %x, rot %d, mir %d, chan %d\n" , plane, paddr, screen_width, pos_x, pos_y, width, height, out_width, out_height, ilace, color_mode, - rotation, mirror); + rotation, mirror, channel);enable_clocks (1 );
@@ -3360,7 +3360,7 @@ int dispc_setup_plane(enum omap_plane plane, color_mode, ilace, rotation_type, rotation, mirror, - global_alpha); + global_alpha, channel);enable_clocks (0 );
drivers/video/omap2/dss/dss.h +1 -1
@@ -360,7 +360,7 @@ int dispc_setup_plane(enum omap_plane plane,bool ilace, enum omap_dss_rotation_type rotation_type, u8 rotation, bool mirror, - u8 global_alpha); + u8 global_alpha, enum omap_channel channel);bool dispc_go_busy (enum omap_channel channel);void dispc_go (enum omap_channel channel);
drivers/video/omap2/dss/manager.c +46 -27
157 lines not on this page · raw message
drivers/video/omap2/dss/overlay.c +12 -2
@@ -623,12 +623,22 @@ void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)int i;struct omap_overlay_manager *lcd_mgr;struct omap_overlay_manager *tv_mgr; +struct omap_overlay_manager *lcd2_mgr =NULL ;struct omap_overlay_manager *mgr =NULL ; lcd_mgr =omap_dss_get_overlay_manager (OMAP_DSS_OVL_MGR_LCD ); tv_mgr =omap_dss_get_overlay_manager (OMAP_DSS_OVL_MGR_TV ); - -if (dssdev->type !=OMAP_DISPLAY_TYPE_VENC ) { +if (cpu_is_omap44xx ()) + lcd2_mgr =omap_dss_get_overlay_manager (OMAP_DSS_OVL_MGR_LCD2 ); + +if (dssdev->channel ==OMAP_DSS_CHANNEL_LCD2 ) { +if (!lcd2_mgr->device || force) { +if (lcd2_mgr->device) + lcd2_mgr->unset_device (lcd2_mgr); + lcd2_mgr->set_device (lcd2_mgr, dssdev); + mgr = lcd2_mgr; + } + }else if (dssdev->type !=OMAP_DISPLAY_TYPE_VENC ) {if (!lcd_mgr->device || force) {if (lcd_mgr->device) lcd_mgr->unset_device (lcd_mgr);
Signature · 1 line
1.7.0.4
Hi,
Quoted 18 lines · ext Archit Taneja
This patch series which incorporates changes in DSS2 to enable
omap_dss_deviceinstances to use the new Overlay Manager LCD2 in DISPC.On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. This channel's video port is a source port for RFBI, DSI2 and DPI. The Primary channel's video port is connected to RFBI and DSI1.
There is a set of regsiters for LCD2 channel similar to the existing LCD channel, like
DISPC_CONTROL2,DISPC_DIVISOR2,DISPC_CONFIG2and so on.In order to decide which LCD Overlay Manager to configure(LCD/LCD2), there is a need for the
omap_dss_deviceinstances to tell the interfacedrivers(DSI, DPI, RFBI etc)which LCD channel they want to connect to, so that the corresponding registers get configured. Therefore, a new enumomap_channelmember is introduced toomap_dss_device.
Quoted 7 lines
This design was made keeping in mind the possible addition of more Overlay Managers in future OMAPs, this code is also backward compatible with OMAP3 as
omap_dss_deviceinstances in OMAP3 will stick only withOMAP_DSS_CHANNEL_LCD.This will apply over the set of
dss_featureframework patches:
http://www.mail-archive.com/[email protected]/msg34768.html
The patchset makes dispc API changes in patch 2, but doesn't change any of the code that uses that API. This means that the kernel doesn't compile after applying patch 2.
The kernel has to be compilable and working after each patch, so that is not acceptable.
Fixing that in easy way would mean squashing the later patches together with patch 2, but that would result in a huge patch, and patch 2 is already very big. Thus I'd suggest doing the changes in smaller bits.
You could first add the register definitions, and make the changes in dispc.c to keep everything working. After that you could change the dispc functions, one by one or in small groups (depending on the amount of changes), and add the channel argument and adjusting the code using those functions in the same time.
This would solve the problem of keeping the kernel working, and would make the patches much more readable.
Tomi
Hi,
Quoted 46 lines · Tomi Valkeinen
Hi,
Quoted 16 lines · ext Archit Taneja
This patch series which incorporates changes in DSS2 to enable
omap_dss_deviceinstances to use the new Overlay Manager LCD2 in DISPC.On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. This channel's video port is a source port for RFBI, DSI2 and DPI. The Primary channel's video port is connected to RFBI and DSI1.
There is a set of regsiters for LCD2 channel similar to the existing LCD channel, like
DISPC_CONTROL2,DISPC_DIVISOR2,DISPC_CONFIG2and so on.In order to decide which LCD Overlay Manager to configure(LCD/LCD2), there is a need for the
omap_dss_deviceinstances to tell the interfacedrivers(DSI, DPI, RFBI etc)which LCD channel they want to connect to, so that the corresponding registers get configured. Therefore, a new enumomap_channelmember is introduced toomap_dss_device.Quoted 7 lines
This design was made keeping in mind the possible addition of more Overlay Managers in future OMAPs, this code is also backward compatible with OMAP3 as
omap_dss_deviceinstances in OMAP3 will stick only withOMAP_DSS_CHANNEL_LCD.This will apply over the set of
dss_featureframework patches:
http://www.mail-archive.com/[email protected]/msg34768.htmlThe patchset makes dispc API changes in patch 2, but doesn't change any of the code that uses that API. This means that the kernel doesn't compile after applying patch 2.
The kernel has to be compilable and working after each patch, so that is not acceptable.
Fixing that in easy way would mean squashing the later patches together with patch 2, but that would result in a huge patch, and patch 2 is already very big. Thus I'd suggest doing the changes in smaller bits.
You could first add the register definitions, and make the changes in
dispc.cto keep everything working. After that you could change the dispc functions, one by one or in small groups (depending on the amount of changes), and add the channel argument and adjusting the code using those functions in the same time.
Quoted 2 lines
This would solve the problem of keeping the kernel working, and would make the patches much more readable.
Thanks, will take care of this.
Archit