Support for Qualcomm msm8660 target
Subsystems (3)
v2 cover Support for Qualcomm msm8660 target
These patches add support to the Qualcomm msm8660 target. It currently provides uniprocessor support only, though SMP support is forthcoming.
Abhijeet Dharmapurikar (2):
msm: irqs-8x60: interrupt map
msm: 8x60: setup correct handlers for private interrupts
Daniel Walker (2):
msm: dma: add stub functions for dma features not yet present on 8x60
msm: allow uart to be conditionally disabled
Gregory Bean (1):
msm: add MSM8x60 FFA support
Jeff Ohlstein (4):
msm: timer: support 8x60 timers
msm: clock: add dummy clock driver
msm: add build support for msm8x60 target
msm: physical offset for MSM8X60
Stepan Moskovchenko (3):
msm: Add MSM IOMMU support
msm: Platform initialization for the IOMMU driver
msm: Platform data for msm8x60 IOMMUs
Steve Muckle (8):
msm: create config option for proc-comm
msm: io: MSM8X60 io support
msm: initial irq definitions for MSM8X60
msm: MSM8X60 RUMI3 board support
msm: irq: rename existing entry-macro to entry-macro-vic
msm: 8x60: gic initialization fixup for RUMI
msm: add msm8x60_surf machine
msm: MSM8X60 simulator board support
arch/arm/mach-msm/Kconfig | 47 + arch/arm/mach-msm/Makefile | 17 +- arch/arm/mach-msm/board-msm8x60.c | 100 ++ arch/arm/mach-msm/clock-dummy.c | 54 + arch/arm/mach-msm/devices-msm8x60-iommu.c | 883 ++++++++++ arch/arm/mach-msm/include/mach/board.h | 2 + arch/arm/mach-msm/include/mach/debug-macro.S | 2 +- arch/arm/mach-msm/include/mach/dma.h | 10 +- arch/arm/mach-msm/include/mach/entry-macro-qgic.S | 88 + arch/arm/mach-msm/include/mach/entry-macro-vic.S | 37 + arch/arm/mach-msm/include/mach/entry-macro.S | 43 +- arch/arm/mach-msm/include/mach/io.h | 1 + arch/arm/mach-msm/include/mach/iommu.h | 103 ++ arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h | 1871 +++++++++++++++++++++ arch/arm/mach-msm/include/mach/irqs-8x60.h | 268 +++ arch/arm/mach-msm/include/mach/irqs.h | 2 + arch/arm/mach-msm/include/mach/memory.h | 2 + arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 97 ++ arch/arm/mach-msm/include/mach/msm_iomap.h | 4 + arch/arm/mach-msm/include/mach/smp.h | 39 + arch/arm/mach-msm/io.c | 15 + arch/arm/mach-msm/iommu.c | 597 +++++++ arch/arm/mach-msm/iommu_dev.c | 364 ++++ arch/arm/mach-msm/timer.c | 23 +- 24 files changed, 4629 insertions(+), 40 deletions(-) create mode 100644 arch/arm/mach-msm/board-msm8x60.c create mode 100644 arch/arm/mach-msm/clock-dummy.c create mode 100644 arch/arm/mach-msm/devices-msm8x60-iommu.c create mode 100644 arch/arm/mach-msm/include/mach/entry-macro-qgic.S create mode 100644 arch/arm/mach-msm/include/mach/entry-macro-vic.S create mode 100644 arch/arm/mach-msm/include/mach/iommu.h create mode 100644 arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h create mode 100644 arch/arm/mach-msm/include/mach/irqs-8x60.h create mode 100644 arch/arm/mach-msm/include/mach/msm_iomap-8x60.h create mode 100644 arch/arm/mach-msm/include/mach/smp.h create mode 100644 arch/arm/mach-msm/iommu.c create mode 100644 arch/arm/mach-msm/iommu_dev.c
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 1/20 msm: create config option for proc-comm
From: Steve Muckle <[email protected]>
Some builds may not support the proc-comm interface with the baseband processor.
--- arch/arm/mach-msm/Kconfig | 7 +++++++ arch/arm/mach-msm/Makefile | 7 ++----- 2 files changed, 9 insertions(+), 5 deletions(-)
arch/arm/mach-msm/Kconfig +7 -0
@@ -10,6 +10,7 @@ config ARCH_MSM7X00A select MSM_SMD select MSM_SMD_PKG3 select CPU_V6 + select MSM_PROC_COMM config ARCH_MSM7X30 bool "MSM7x30"
@@ -18,6 +19,7 @@ config ARCH_MSM7X30 select MSM_VIC select CPU_V7 select MSM_REMOTE_SPINLOCK_DEKKERS + select MSM_PROC_COMM config ARCH_QSD8X50 bool "QSD8X50"
@@ -26,6 +28,8 @@ config ARCH_QSD8X50 select MSM_VIC select CPU_V7 select MSM_REMOTE_SPINLOCK_LDREX + select MSM_PROC_COMM + endchoice config MSM_SOC_REV_A
@@ -103,6 +107,9 @@ endchoice config MSM_SMD_PKG3 bool +config MSM_PROC_COMM + bool + config MSM_SMD bool
arch/arm/mach-msm/Makefile +2 -5
@@ -1,9 +1,5 @@ -obj-y += proc_comm.o obj-y += io.o idle.o timer.o dma.o -obj-y += vreg.o obj-y += acpuclock-arm11.o -obj-y += clock.o clock-pcom.o -obj-y += gpio.o ifdef CONFIG_MSM_VIC obj-y += irq-vic.o
@@ -11,10 +7,11 @@ else obj-y += irq.o endif +obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o +obj-$(CONFIG_MSM_PROC_COMM) += clock.o gpio.c obj-$(CONFIG_ARCH_QSD8X50) += sirc.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o - obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 2/20 msm: io: MSM8X60 io support
In reply to Jeff OhlsteinFrom: Steve Muckle <[email protected]>
MSM8X60 has different IO mappings than previous MSMs.
--- arch/arm/mach-msm/include/mach/io.h | 1 + arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 57 +++++++++++++++++++++++ arch/arm/mach-msm/include/mach/msm_iomap.h | 4 ++ arch/arm/mach-msm/io.c | 15 ++++++ 4 files changed, 77 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
arch/arm/mach-msm/include/mach/io.h +1 -0
@@ -28,6 +28,7 @@ void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mvoid msm_map_qsd8x50_io (void );void msm_map_msm7x30_io (void ); +void msm_map_msm8x60_io (void );extern unsigned int msm_shared_ram_phys;
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h new file +57 -0
57 lines not on this page · raw message
arch/arm/mach-msm/include/mach/msm_iomap.h +4 -0
@@ -47,8 +47,12 @@#include "msm_iomap-7x30.h" #elif defined(CONFIG_ARCH_QSD8X50 )#include "msm_iomap-8x50.h" +#elif defined(CONFIG_ARCH_MSM8X60 ) +#include "msm_iomap-8x60.h" #else #include "msm_iomap-7x00.h" #endif + +#endif
arch/arm/mach-msm/io.c +15 -0
@@ -100,6 +100,21 @@ void __init msm_map_qsd8x50_io(void) }#endif /* CONFIG_ARCH_QSD8X50 */ +#ifdef CONFIG_ARCH_MSM8X60 +static struct map_desc msm8x60_io_desc[]__initdata = { +MSM_DEVICE (QGIC_DIST ), +MSM_DEVICE (QGIC_CPU ), +MSM_DEVICE (TMR ), +MSM_DEVICE (ACC ), +MSM_DEVICE (GCC ), +}; + +void __init msm_map_msm8x60_io (void ) +{ +iotable_init (msm8x60_io_desc,ARRAY_SIZE (msm8x60_io_desc)); +} +#endif /* CONFIG_ARCH_MSM8X60 */ +#ifdef CONFIG_ARCH_MSM7X30 static struct map_desc msm7x30_io_desc[]__initdata = { MSM_DEVICE(VIC),
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 3/20 msm: initial irq definitions for MSM8X60
In reply to Jeff OhlsteinFrom: Steve Muckle <[email protected]>
IRQ assignments are different for MSM8X60 than other existing MSMs.
--- arch/arm/mach-msm/include/mach/irqs-8x60.h | 43 ++++++++++++++++++++++++++++ arch/arm/mach-msm/include/mach/irqs.h | 2 + 2 files changed, 45 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-msm/include/mach/irqs-8x60.h
arch/arm/mach-msm/include/mach/irqs-8x60.h new file +43 -0
@@ -0,0 +1,43 @@ +/* Copyright (c) 2010 Code Aurora Forum. All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are met: +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* * Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the distribution. +* * Neither the name of Code Aurora nor +* the names of its contributors may be used to endorse or promote +* products derived from this software without specific prior written +* permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + +#ifndef __ASM_ARCH_MSM_IRQS_8X60_H +#define __ASM_ARCH_MSM_IRQS_8X60_H + +/* MSM ACPU Interrupt Numbers */ + +/* 0-15: STI/SGI (software triggered/generated interrupts) +* 16-31: PPI (private peripheral interrupts) +* 32+: SPI (shared peripheral interrupts) +*/ + +#define NR_GPIO_IRQS 173 +#define NR_MSM_IRQS 256 +#define NR_BOARD_IRQS 0 + +#endif
arch/arm/mach-msm/include/mach/irqs.h +2 -0
@@ -24,6 +24,8 @@#elif defined(CONFIG_ARCH_QSD8X50 )#include "irqs-8x50.h" #include "sirc.h" +#elif defined(CONFIG_ARCH_MSM8X60 ) +#include "irqs-8x60.h" #elif defined(CONFIG_ARCH_MSM_ARM11 )#include "irqs-7x00.h" #else
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
Re: [PATCH 03/20 v2] msm: initial irq definitions for MSM8X60
Quoted 6 lines · Jeff Ohlstein
arch/arm/mach-msm/include/mach/irqs-8x60.h new file +3
-0@@ -0,0 +1,43 @@ +/* Copyright (c) 2010 Code Aurora Forum. All rights reserved. +* +* Redistribution and use in source and binary forms, with or without
arch/arm/mach-msm/include/mach/irqs-8x60.h line 13
Quoted 10 lines
arch/arm/mach-msm/include/mach/irqs-8x60.h new file +10
-0+* modification, are permitted provided that the following conditions are met: +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* * Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the distribution. +* * Neither the name of Code Aurora nor +* the names of its contributors may be used to endorse or promote +* products derived from this software without specific prior written +* permission.
We missed another of these. Please be sure to carefully check that all of the files have the GPLv2 license text, not this license.
David
Signature · 2 lines
Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 4/20 msm: irqs-8x60: interrupt map
In reply to Jeff OhlsteinFrom: Abhijeet Dharmapurikar <[email protected]>
Define the interrupt map in irq-8x60.h
--- arch/arm/mach-msm/include/mach/irqs-8x60.h | 225 ++++++++++++++++++++++++++++ 1 files changed, 225 insertions(+), 0 deletions(-)
arch/arm/mach-msm/include/mach/irqs-8x60.h +225 -0
@@ -36,6 +36,231 @@* 32+: SPI (shared peripheral interrupts) */ +#define GIC_PPI_START 16 +#define GIC_SPI_START 32 + +#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 0) +#define INT_GP_TIMER_EXP (GIC_PPI_START + 1) +#define INT_GP_TIMER2_EXP (GIC_PPI_START + 2) +#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 3) +#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 4) +#define AVS_SVICINT (GIC_PPI_START + 5) +#define AVS_SVICINTSWDONE (GIC_PPI_START + 6) +#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 7) +#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 8) +#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 9) +#define SC_AVSCPUXDOWN (GIC_PPI_START + 10) +#define SC_AVSCPUXUP (GIC_PPI_START + 11) +#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 12) +/* PPI 13 to 15 are unused */ + + +#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0) +#define SC_SICL2IRPTREQ (GIC_SPI_START + 1) +#define SC_SICL2ACGIRPTREQ (GIC_SPI_START + 2) +#define NC (GIC_SPI_START + 3) +#define TLMM_SCSS_DIR_CONN_IRQ_0 (GIC_SPI_START + 4) +#define TLMM_SCSS_DIR_CONN_IRQ_1 (GIC_SPI_START + 5) +#define TLMM_SCSS_DIR_CONN_IRQ_2 (GIC_SPI_START + 6) +#define TLMM_SCSS_DIR_CONN_IRQ_3 (GIC_SPI_START + 7) +#define TLMM_SCSS_DIR_CONN_IRQ_4 (GIC_SPI_START + 8) +#define TLMM_SCSS_DIR_CONN_IRQ_5 (GIC_SPI_START + 9) +#define TLMM_SCSS_DIR_CONN_IRQ_6 (GIC_SPI_START + 10) +#define TLMM_SCSS_DIR_CONN_IRQ_7 (GIC_SPI_START + 11) +#define TLMM_SCSS_DIR_CONN_IRQ_8 (GIC_SPI_START + 12) +#define TLMM_SCSS_DIR_CONN_IRQ_9 (GIC_SPI_START + 13) +#define PM8058_SEC_IRQ_N (GIC_SPI_START + 14) +#define PM8901_SEC_IRQ_N (GIC_SPI_START + 15) +#define TLMM_SCSS_SUMMARY_IRQ (GIC_SPI_START + 16) +#define SPDM_RT_1_IRQ (GIC_SPI_START + 17) +#define SPDM_DIAG_IRQ (GIC_SPI_START + 18) +#define RPM_SCSS_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19) +#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20) +#define RPM_SCSS_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21) +#define RPM_SCSS_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22) +#define RPM_SCSS_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23) +#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24) +#define RPM_SCSS_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25) +#define RPM_SCSS_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26) +#define SSBI2_2_SC_CPU0_SECURE_INT (GIC_SPI_START + 27) +#define SSBI2_2_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 28) +#define SSBI2_1_SC_CPU0_SECURE_INT (GIC_SPI_START + 29) +#define SSBI2_1_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 30) +#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31) +#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32) +#define MARM_FIQ (GIC_SPI_START + 33) +#define MARM_IRQ (GIC_SPI_START + 34) +#define MARM_L2CC_IRQ (GIC_SPI_START + 35) +#define MARM_WDOG_EXPIRED (GIC_SPI_START + 36) +#define MARM_SCSS_GP_IRQ_0 (GIC_SPI_START + 37) +#define MARM_SCSS_GP_IRQ_1 (GIC_SPI_START + 38) +#define MARM_SCSS_GP_IRQ_2 (GIC_SPI_START + 39) +#define MARM_SCSS_GP_IRQ_3 (GIC_SPI_START + 40) +#define MARM_SCSS_GP_IRQ_4 (GIC_SPI_START + 41) +#define MARM_SCSS_GP_IRQ_5 (GIC_SPI_START + 42) +#define MARM_SCSS_GP_IRQ_6 (GIC_SPI_START + 43) +#define MARM_SCSS_GP_IRQ_7 (GIC_SPI_START + 44) +#define MARM_SCSS_GP_IRQ_8 (GIC_SPI_START + 45) +#define MARM_SCSS_GP_IRQ_9 (GIC_SPI_START + 46) +#define VPE_IRQ (GIC_SPI_START + 47) +#define VFE_IRQ (GIC_SPI_START + 48) +#define VCODEC_IRQ (GIC_SPI_START + 49) +#define TV_ENC_IRQ (GIC_SPI_START + 50) +#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51) +#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52) +#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53) +#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54) +#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55) +#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56) +#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57) +#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58) +#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59) +#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60) +#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61) +#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62) +#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63) +#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64) +#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65) +#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66) +#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67) +#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68) +#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69) +#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70) +#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71) +#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72) +#define ROT_IRQ (GIC_SPI_START + 73) +#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74) +#define MDP_IRQ (GIC_SPI_START + 75) +#define JPEGD_IRQ (GIC_SPI_START + 76) +#define JPEG_IRQ (GIC_SPI_START + 77) +#define MMSS_IMEM_IRQ (GIC_SPI_START + 78) +#define HDMI_IRQ (GIC_SPI_START + 79) +#define GFX3D_IRQ (GIC_SPI_START + 80) +#define GFX2D0_IRQ (GIC_SPI_START + 81) +#define DSI_IRQ (GIC_SPI_START + 82) +#define CSI_1_IRQ (GIC_SPI_START + 83) +#define CSI_0_IRQ (GIC_SPI_START + 84) +#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85) +#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86) +#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87) +#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88) +#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89) +#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90) +#define TOP_IMEM_IRQ (GIC_SPI_START + 91) +#define FABRIC_SYS_IRQ (GIC_SPI_START + 92) +#define FABRIC_APPS_IRQ (GIC_SPI_START + 93) +#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94) +#define SDC4_BAM_IRQ (GIC_SPI_START + 95) +#define SDC3_BAM_IRQ (GIC_SPI_START + 96) +#define SDC2_BAM_IRQ (GIC_SPI_START + 97) +#define SDC1_BAM_IRQ (GIC_SPI_START + 98) +#define FABRIC_SPS_IRQ (GIC_SPI_START + 99) +#define USB1_HS_IRQ (GIC_SPI_START + 100) +#define SDC4_IRQ_0 (GIC_SPI_START + 101) +#define SDC3_IRQ_0 (GIC_SPI_START + 102) +#define SDC2_IRQ_0 (GIC_SPI_START + 103) +#define SDC1_IRQ_0 (GIC_SPI_START + 104) +#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105) +#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106) +#define SPS_MTI_0 (GIC_SPI_START + 107) +#define SPS_MTI_1 (GIC_SPI_START + 108) +#define SPS_MTI_2 (GIC_SPI_START + 109) +#define SPS_MTI_3 (GIC_SPI_START + 110) +#define SPS_MTI_4 (GIC_SPI_START + 111) +#define SPS_MTI_5 (GIC_SPI_START + 112) +#define SPS_MTI_6 (GIC_SPI_START + 113) +#define SPS_MTI_7 (GIC_SPI_START + 114) +#define SPS_MTI_8 (GIC_SPI_START + 115) +#define SPS_MTI_9 (GIC_SPI_START + 116) +#define SPS_MTI_10 (GIC_SPI_START + 117) +#define SPS_MTI_11 (GIC_SPI_START + 118) +#define SPS_MTI_12 (GIC_SPI_START + 119) +#define SPS_MTI_13 (GIC_SPI_START + 120) +#define SPS_MTI_14 (GIC_SPI_START + 121) +#define SPS_MTI_15 (GIC_SPI_START + 122) +#define SPS_MTI_16 (GIC_SPI_START + 123) +#define SPS_MTI_17 (GIC_SPI_START + 124) +#define SPS_MTI_18 (GIC_SPI_START + 125) +#define SPS_MTI_19 (GIC_SPI_START + 126) +#define SPS_MTI_20 (GIC_SPI_START + 127) +#define SPS_MTI_21 (GIC_SPI_START + 128) +#define SPS_MTI_22 (GIC_SPI_START + 129) +#define SPS_MTI_23 (GIC_SPI_START + 130) +#define SPS_MTI_24 (GIC_SPI_START + 131) +#define SPS_MTI_25 (GIC_SPI_START + 132) +#define SPS_MTI_26 (GIC_SPI_START + 133) +#define SPS_MTI_27 (GIC_SPI_START + 134) +#define SPS_MTI_28 (GIC_SPI_START + 135) +#define SPS_MTI_29 (GIC_SPI_START + 136) +#define SPS_MTI_30 (GIC_SPI_START + 137) +#define SPS_MTI_31 (GIC_SPI_START + 138) +#define UXMC_EBI2_WR_ER_DONE_IRQ (GIC_SPI_START + 139) +#define UXMC_EBI2_OP_DONE_IRQ (GIC_SPI_START + 140) +#define USB2_IRQ (GIC_SPI_START + 141) +#define USB1_IRQ (GIC_SPI_START + 142) +#define TSSC_SSBI_IRQ (GIC_SPI_START + 143) +#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144) +#define TSSC_PENUP_IRQ (GIC_SPI_START + 145) +#define INT_UART1DM_IRQ (GIC_SPI_START + 146) +#define GSBI1_QUP_IRQ (GIC_SPI_START + 147) +#define INT_UART2DM_IRQ (GIC_SPI_START + 148) +#define GSBI2_QUP_IRQ (GIC_SPI_START + 149) +#define INT_UART3DM_IRQ (GIC_SPI_START + 150) +#define GSBI3_QUP_IRQ (GIC_SPI_START + 151) +#define INT_UART4DM_IRQ (GIC_SPI_START + 152) +#define GSBI4_QUP_IRQ (GIC_SPI_START + 153) +#define INT_UART5DM_IRQ (GIC_SPI_START + 154) +#define GSBI5_QUP_IRQ (GIC_SPI_START + 155) +#define INT_UART6DM_IRQ (GIC_SPI_START + 156) +#define GSBI6_QUP_IRQ (GIC_SPI_START + 157) +#define INT_UART7DM_IRQ (GIC_SPI_START + 158) +#define GSBI7_QUP_IRQ (GIC_SPI_START + 159) +#define INT_UART8DM_IRQ (GIC_SPI_START + 160) +#define GSBI8_QUP_IRQ (GIC_SPI_START + 161) +#define TSIF_TSPP_IRQ (GIC_SPI_START + 162) +#define TSIF_BAM_IRQ (GIC_SPI_START + 163) +#define TSIF2_IRQ (GIC_SPI_START + 164) +#define TSIF1_IRQ (GIC_SPI_START + 165) +#define INT_ADM1_MASTER (GIC_SPI_START + 166) +#define INT_ADM1_AARM (GIC_SPI_START + 167) +#define INT_ADM1_SD2 (GIC_SPI_START + 168) +#define INT_ADM1_SD3 (GIC_SPI_START + 169) +#define INT_ADM0_MASTER (GIC_SPI_START + 170) +#define INT_ADM0_AARM (GIC_SPI_START + 171) +#define INT_ADM0_SD2 (GIC_SPI_START + 172) +#define INT_ADM0_SD3 (GIC_SPI_START + 173) +#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174) +#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175) +#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176) +#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177) +#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178) +#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179) +#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180) +#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181) +#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182) +#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183) +#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184) +#define HSDDRX_SMICH0_IRQ (GIC_SPI_START + 185) +#define HSDDRX_EBI1_IRQ (GIC_SPI_START + 186) +#define SDC5_BAM_IRQ (GIC_SPI_START + 187) +#define SDC5_IRQ_0 (GIC_SPI_START + 188) +#define INT_UART9DM_IRQ (GIC_SPI_START + 189) +#define GSBI9_QUP_IRQ (GIC_SPI_START + 190) +#define INT_UART10DM_IRQ (GIC_SPI_START + 191) +#define GSBI10_QUP_IRQ (GIC_SPI_START + 192) +#define INT_UART11DM_IRQ (GIC_SPI_START + 193) +#define GSBI11_QUP_IRQ (GIC_SPI_START + 194) +#define INT_UART12DM_IRQ (GIC_SPI_START + 195) +#define GSBI12_QUP_IRQ (GIC_SPI_START + 196) +/*SPI 197 to 216 arent used in 8x60*/ +#define SMPSS_SPARE_1 (GIC_SPI_START + 217) +#define SMPSS_SPARE_2 (GIC_SPI_START + 218) +#define SMPSS_SPARE_3 (GIC_SPI_START + 219) +#define SMPSS_SPARE_4 (GIC_SPI_START + 220) +#define SMPSS_SPARE_5 (GIC_SPI_START + 221) +#define SMPSS_SPARE_6 (GIC_SPI_START + 222) +#define SMPSS_SPARE_7 (GIC_SPI_START + 223) +#define NR_GPIO_IRQS 173#define NR_MSM_IRQS 256#define NR_BOARD_IRQS 0
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 5/20 msm: timer: support 8x60 timers
In reply to Jeff Ohlstein--- arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 7 +++++++ arch/arm/mach-msm/timer.c | 23 +++++++++++++++++++++-- 2 files changed, 28 insertions(+), 2 deletions(-)
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +7 -0
@@ -54,4 +54,11 @@#define MSM_SHARED_RAM_BASE IOMEM(0xF0100000)#define MSM_SHARED_RAM_SIZE SZ_1M +#define MSM_TMR_BASE IOMEM(0xF0200000) +#define MSM_TMR_PHYS 0x02000000 +#define MSM_TMR_SIZE (SZ_1M) + +#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4) +#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24) +#endif
arch/arm/mach-msm/timer.c +21 -2
@@ -28,7 +28,6 @@#ifndef MSM_DGT_BASE #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)#endif -#define MSM_DGT_SHIFT (5)#define TIMER_MATCH_VAL 0x0000#define TIMER_COUNT_VAL 0x0004
@@ -36,12 +35,28 @@#define TIMER_ENABLE_CLR_ON_MATCH_EN 2#define TIMER_ENABLE_EN 1#define TIMER_CLEAR 0x000C - +#define DGT_CLK_CTL 0x0034 +enum { +DGT_CLK_CTL_DIV_1 =0 , +DGT_CLK_CTL_DIV_2 =1 , +DGT_CLK_CTL_DIV_3 =2 , +DGT_CLK_CTL_DIV_4 =3 , +};#define CSR_PROTECTION 0x0020#define CSR_PROTECTION_EN 1#define GPT_HZ 32768 + +#if defined(CONFIG_ARCH_QSD8X50 ) +#define DGT_HZ (19200000 / 4)/* 19.2 MHz / 4 by default */ +#define MSM_DGT_SHIFT (0) +#elif defined(CONFIG_ARCH_MSM7X30 ) || defined(CONFIG_ARCH_MSM8X60 ) +#define DGT_HZ (24576000 / 4)/* 24.576 MHz (LPXO) / 4 by default */ +#define MSM_DGT_SHIFT (0) +#else #define DGT_HZ 19200000/* 19.2 MHz or 600 KHz after shift */ +#define MSM_DGT_SHIFT (5) +#endif struct msm_clock {struct clock_event_device clockevent;
@@ -170,6 +185,10 @@ static void __init msm_timer_init(void)int i;int res; +#ifdef CONFIG_ARCH_MSM8X60 +writel (DGT_CLK_CTL_DIV_4 ,MSM_TMR_BASE +DGT_CLK_CTL ); +#endif +for (i =0 ; i <ARRAY_SIZE (msm_clocks); i++) {struct msm_clock *clock = &msm_clocks[i];struct clock_event_device *ce = &clock->clockevent;
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 6/20 msm: MSM8X60 RUMI3 board support
In reply to Jeff OhlsteinFrom: Steve Muckle <[email protected]>
Board configuration for MSM8X60 emulation on RUMI3.
--- arch/arm/mach-msm/Kconfig | 6 +++ arch/arm/mach-msm/Makefile | 1 - arch/arm/mach-msm/board-msm8x60.c | 58 ++++++++++++++++++++++++++++++++ arch/arm/mach-msm/include/mach/board.h | 2 + 4 files changed, 66 insertions(+), 1 deletions(-) create mode 100644 arch/arm/mach-msm/board-msm8x60.c
arch/arm/mach-msm/Kconfig +6 -0
@@ -78,6 +78,12 @@ config MACH_QSD8X50A_ST1_5 help Support for the Qualcomm ST1.5. +config MACH_MSM8X60_RUMI3 + depends on ARCH_MSM8X60 + bool "MSM8x60 RUMI3" + help + Support for the Qualcomm MSM8x60 RUMI3 emulator. + endmenu config MSM_DEBUG_UART
arch/arm/mach-msm/Makefile +0 -1
@@ -16,4 +16,3 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o d obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -
arch/arm/mach-msm/board-msm8x60.c new file +58 -0
58 lines not on this page · raw message
arch/arm/mach-msm/include/mach/board.h +2 -0
@@ -33,6 +33,8 @@ struct msm_acpu_clock_platform_datastruct clk ; +extern struct sys_timer msm_timer; +/* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices (void );
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 7/20 msm: irq: rename existing entry-macro to entry-macro-vic
In reply to Jeff OhlsteinFrom: Steve Muckle <[email protected]>
The existing MSM irq entry macro is specific to a VIC implementation. Renaming this makes room for irq support based on other interrupt controllers.
--- arch/arm/mach-msm/include/mach/entry-macro-qgic.S | 88 +++++++++++++++++++++ arch/arm/mach-msm/include/mach/entry-macro-vic.S | 37 +++++++++ arch/arm/mach-msm/include/mach/entry-macro.S | 43 +++------- arch/arm/mach-msm/include/mach/smp.h | 39 +++++++++ 4 files changed, 178 insertions(+), 29 deletions(-) create mode 100644 arch/arm/mach-msm/include/mach/entry-macro-qgic.S create mode 100644 arch/arm/mach-msm/include/mach/entry-macro-vic.S create mode 100644 arch/arm/mach-msm/include/mach/smp.h
arch/arm/mach-msm/include/mach/entry-macro-qgic.S new file +88 -0
@@ -0,0 +1,88 @@ +/* + * Low-level IRQ helper macros + * + * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Migrated the code from ARM MP port to be more consistant + * with interrupt processing , the following still holds true + * however, all interrupts are treated the same regardless of + * if they are local IPI or PPI + * + * Interrupts 0-15 are IPI + * 16-31 are PPI + * (16-18 are the timers) + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * A simple read from the controller will tell us the number of the + * highest priority enabled interrupt. We then just need to check + * whether it is in the valid range for an IRQ (0-1020 inclusive). + * + * Base ARM code assumes that the local (private) peripheral interrupts + * are not valid, we treat them differently, in that the privates are + * handled like normal shared interrupts with the exception that only + * one processor can register the interrupt and the handler must be + * the same for all processors. + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU, + 9-0 =int # */ + + bic \irqnr, \irqstat, #0x1c00 @mask src + cmp \irqnr, #15 + ldr \tmp, =1021 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #16 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm
arch/arm/mach-msm/include/mach/entry-macro-vic.S new file +37 -0
@@ -0,0 +1,37 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <[email protected]> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <mach/msm_iomap.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + @ enable imprecise aborts + cpsie a + mov \base, #MSM_VIC_BASE + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ 0xD0 has irq# or old irq# if the irq has been handled + @ 0xD4 has irq# or -1 if none pending *but* if you just + @ read 0xD4 you never get the first irq for some reason + ldr \irqnr, [\base, #0xD0] + ldr \irqnr, [\base, #0xD4] + cmp \irqnr, #0xffffffff + .endm
arch/arm/mach-msm/include/mach/entry-macro.S +14 -29
52 lines not on this page · raw message
arch/arm/mach-msm/include/mach/smp.h new file +39 -0
@@ -0,0 +1,39 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are met: +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* * Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the distribution. +* * Neither the name of Code Aurora nor +* the names of its contributors may be used to endorse or promote +* products derived from this software without specific prior written +* permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + +#ifndef __ASM_ARCH_MSM_SMP_H +#define __ASM_ARCH_MSM_SMP_H + +#include <asm/hardware/gic.h> + +static inline void smp_cross_call (const struct cpumask *mask) +{ +gic_raise_softirq (mask,1 ); +} + +#endif
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 8/20 msm: 8x60: gic initialization fixup for RUMI
In reply to Jeff OhlsteinFrom: Steve Muckle <[email protected]>
On RUMI platform STIs are not enabled by default, contrary to the GIC spec. The bits for STIs in the enable/enable clear registers are also RW instead of RO. STIs need to be enabled at initialization time.
--- arch/arm/mach-msm/board-msm8x60.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-)
arch/arm/mach-msm/board-msm8x60.c +20 -0
@@ -19,6 +19,7 @@#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h>
@@ -41,9 +42,28 @@ static void __init msm8x60_map_io(void)static void __init msm8x60_init_irq (void ) { +unsigned int i; +gic_dist_init (0 ,MSM_QGIC_DIST_BASE ,1 ); gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE ;gic_cpu_init (0 ,MSM_QGIC_CPU_BASE ); + +/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ +writel (0xFFFFD7FF ,MSM_QGIC_DIST_BASE +GIC_DIST_CONFIG +4 ); + +/* RUMI does not adhere to GIC spec by enabling STIs by default. +* Enable/clear is supposed to be RO for STIs, but is RW on RUMI. +*/ +writel (0x0000FFFF ,MSM_QGIC_DIST_BASE +GIC_DIST_ENABLE_SET ); + +/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet +* as they are configured as level, which does not play nice with +* handle_percpu_irq. +*/ +for (i =GIC_PPI_START ; i <GIC_SPI_START ; i++) { +if (i !=AVS_SVICINT && i !=AVS_SVICINTSWDONE ) +set_irq_handler (i, handle_percpu_irq); + } }static void __init msm8x60_init (void )
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 9/20 msm: clock: add dummy clock driver
In reply to Jeff OhlsteinNeed to add this until real clock support for 8x60 goes in, or else some drivers won't compile.
--- arch/arm/mach-msm/Makefile | 1 + arch/arm/mach-msm/clock-dummy.c | 54 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-msm/clock-dummy.c
arch/arm/mach-msm/Makefile +1 -0
@@ -7,6 +7,7 @@ else obj-y += irq.o endif +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o gpio.c obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
arch/arm/mach-msm/clock-dummy.c new file +54 -0
54 lines not on this page · raw message
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 10/20 msm: dma: add stub functions for dma features not yet present on 8x60
In reply to Jeff OhlsteinFrom: Daniel Walker <[email protected]>
--- arch/arm/mach-msm/include/mach/dma.h | 10 +++++++++- 1 files changed, 9 insertions(+), 1 deletions(-)
arch/arm/mach-msm/include/mach/dma.h +9 -1
@@ -32,10 +32,18 @@ struct msm_dmov_cmd {void *data; }; +#ifndef CONFIG_ARCH_MSM8X60 void msm_dmov_enqueue_cmd (unsigned id,struct msm_dmov_cmd *cmd);void msm_dmov_stop_cmd (unsigned id,struct msm_dmov_cmd *cmd,int graceful);int msm_dmov_exec_cmd (unsigned id,unsigned int cmdptr); - +#else +static inline +void msm_dmov_enqueue_cmd (unsigned id,struct msm_dmov_cmd *cmd) { } +static inline +void msm_dmov_stop_cmd (unsigned id,struct msm_dmov_cmd *cmd,int graceful) { } +static inline +int msm_dmov_exec_cmd (unsigned id,unsigned int cmdptr) {return -EIO ; } +#endif #define DMOV_SD0 (off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 11/20 msm: allow uart to be conditionally disabled
In reply to Jeff OhlsteinFrom: Daniel Walker <[email protected]>
Some MSM targets don't select the debug UART in this way. For those we need to disable this selection mechanism.
--- arch/arm/mach-msm/Kconfig | 8 ++++++++ arch/arm/mach-msm/include/mach/debug-macro.S | 2 +- 2 files changed, 9 insertions(+), 1 deletions(-)
arch/arm/mach-msm/Kconfig +8 -0
@@ -11,6 +11,7 @@ config ARCH_MSM7X00A select MSM_SMD_PKG3 select CPU_V6 select MSM_PROC_COMM + select HAS_MSM_DEBUG_UART_PHYS config ARCH_MSM7X30 bool "MSM7x30"
@@ -20,6 +21,7 @@ config ARCH_MSM7X30 select CPU_V7 select MSM_REMOTE_SPINLOCK_DEKKERS select MSM_PROC_COMM + select HAS_MSM_DEBUG_UART_PHYS config ARCH_QSD8X50 bool "QSD8X50"
@@ -29,6 +31,7 @@ config ARCH_QSD8X50 select CPU_V7 select MSM_REMOTE_SPINLOCK_LDREX select MSM_PROC_COMM + select HAS_MSM_DEBUG_UART_PHYS endchoice
@@ -40,6 +43,9 @@ config ARCH_MSM_ARM11 config ARCH_MSM_SCORPION bool +config HAS_MSM_DEBUG_UART_PHYS + bool + config MSM_VIC bool
@@ -92,6 +98,7 @@ config MSM_DEBUG_UART default 2 if MSM_DEBUG_UART2 default 3 if MSM_DEBUG_UART3 +if HAS_MSM_DEBUG_UART_PHYS choice prompt "Debug UART"
@@ -109,6 +116,7 @@ choice config MSM_DEBUG_UART3 bool "UART3" endchoice +endif config MSM_SMD_PKG3 bool
arch/arm/mach-msm/include/mach/debug-macro.S +1 -1
@@ -19,7 +19,7 @@ #include <mach/hardware.h> #include <mach/msm_iomap.h> -#ifdef CONFIG_MSM_DEBUG_UART +#ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS .macro addruart, rx, tmp @ see if the MMU is enabled and select appropriate base address mrc p15, 0, \rx, c1, c0
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 12/20 msm: add build support for msm8x60 target
In reply to Jeff Ohlstein--- arch/arm/mach-msm/Kconfig | 7 +++++++ arch/arm/mach-msm/Makefile | 8 +++++++- 2 files changed, 14 insertions(+), 1 deletions(-)
arch/arm/mach-msm/Kconfig +7 -0
@@ -33,6 +33,13 @@ config ARCH_QSD8X50 select MSM_PROC_COMM select HAS_MSM_DEBUG_UART_PHYS +config ARCH_MSM8X60 + bool "MSM8X60" + select ARM_GIC + select CPU_V7 + select MSM_V2_TLMM + select MACH_MSM8X60_RUMI3 if (!MACH_MSM8X60_RUMI3) + endchoice config MSM_SOC_REV_A
arch/arm/mach-msm/Makefile +7 -1
@@ -1,11 +1,16 @@ -obj-y += io.o idle.o timer.o dma.o +obj-y += io.o idle.o timer.o +ifndef CONFIG_ARCH_MSM8X60 obj-y += acpuclock-arm11.o +obj-y += dma.o +endif ifdef CONFIG_MSM_VIC obj-y += irq-vic.o else +ifndef CONFIG_ARCH_MSM8X60 obj-y += irq.o endif +endif obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
@@ -17,3 +22,4 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o d obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o +obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 13/20 msm: 8x60: setup correct handlers for private interrupts
In reply to Jeff OhlsteinFrom: Abhijeet Dharmapurikar <[email protected]>
Private Peripheral interrupts could be edge triggered or level triggered depending on the platform. Initialize handlers for these in board file.
--- arch/arm/mach-msm/board-msm8x60.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-msm/board-msm8x60.c +1 -1
@@ -44,7 +44,7 @@ static void __init msm8x60_init_irq(void) {unsigned int i; -gic_dist_init (0 ,MSM_QGIC_DIST_BASE ,1 ); +gic_dist_init (0 ,MSM_QGIC_DIST_BASE ,GIC_PPI_START ); gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE ;gic_cpu_init (0 ,MSM_QGIC_CPU_BASE );
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 14/20 msm: physical offset for MSM8X60
In reply to Jeff OhlsteinThe MSM8x60 has a different physical memory offset than other targets.
--- arch/arm/mach-msm/include/mach/memory.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/mach-msm/include/mach/memory.h +2 -0
@@ -23,6 +23,8 @@#define PHYS_OFFSET UL(0x20000000)#elif defined(CONFIG_ARCH_MSM7X30 )#define PHYS_OFFSET UL(0x00200000) +#elif defined(CONFIG_ARCH_MSM8X60 ) +#define PHYS_OFFSET UL(0x40200000)#else #define PHYS_OFFSET UL(0x10000000)#endif
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 15/20 msm: add msm8x60_surf machine
In reply to Jeff OhlsteinFrom: Steve Muckle <[email protected]>
--- arch/arm/mach-msm/Kconfig | 8 +++++++- arch/arm/mach-msm/board-msm8x60.c | 7 +++++++ 2 files changed, 14 insertions(+), 1 deletions(-)
arch/arm/mach-msm/Kconfig +7 -1
@@ -38,7 +38,7 @@ config ARCH_MSM8X60 select ARM_GIC select CPU_V7 select MSM_V2_TLMM - select MACH_MSM8X60_RUMI3 if (!MACH_MSM8X60_RUMI3) + select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3) endchoice
@@ -97,6 +97,12 @@ config MACH_MSM8X60_RUMI3 help Support for the Qualcomm MSM8x60 RUMI3 emulator. +config MACH_MSM8X60_SURF + depends on ARCH_MSM8X60 + bool "MSM8x60 SURF" + help + Support for the Qualcomm MSM8x60 SURF eval board. + endmenu config MSM_DEBUG_UART
arch/arm/mach-msm/board-msm8x60.c +7 -0
@@ -76,3 +76,10 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END + +MACHINE_START (MSM8X60_SURF ,"QCT MSM8X60 SURF" ) + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 16/20 msm: MSM8X60 simulator board support
In reply to Jeff OhlsteinFrom: Steve Muckle <[email protected]>
Board configuration for MSM8X60 simulation.
--- arch/arm/mach-msm/Kconfig | 8 +++++++- arch/arm/mach-msm/board-msm8x60.c | 10 +++++++++- 2 files changed, 16 insertions(+), 2 deletions(-)
arch/arm/mach-msm/Kconfig +7 -1
@@ -38,7 +38,7 @@ config ARCH_MSM8X60 select ARM_GIC select CPU_V7 select MSM_V2_TLMM - select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3) + select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM) endchoice
@@ -103,6 +103,12 @@ config MACH_MSM8X60_SURF help Support for the Qualcomm MSM8x60 SURF eval board. +config MACH_MSM8X60_SIM + depends on ARCH_MSM8X60 + bool "MSM8x60 Simulator" + help + Support for the Qualcomm MSM8x60 simulator. + endmenu config MSM_DEBUG_UART
arch/arm/mach-msm/board-msm8x60.c +9 -1
@@ -54,7 +54,8 @@ static void __init msm8x60_init_irq(void)/* RUMI does not adhere to GIC spec by enabling STIs by default. * Enable/clear is supposed to be RO for STIs, but is RW on RUMI. */ -writel (0x0000FFFF ,MSM_QGIC_DIST_BASE +GIC_DIST_ENABLE_SET ); +if (!machine_is_msm8x60_sim ()) +writel (0x0000FFFF ,MSM_QGIC_DIST_BASE +GIC_DIST_ENABLE_SET );/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet * as they are configured as level, which does not play nice with
@@ -83,3 +84,10 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END + +MACHINE_START (MSM8X60_SIM ,"QCT MSM8X60 SIMULATOR" ) + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 17/20 msm: add MSM8x60 FFA support
In reply to Jeff OhlsteinFrom: Gregory Bean <[email protected]>
The MSM8X60 FFA contains different components than the MSM8X60 SURF, and therefore requires a different ARCH type and machine ID.
--- arch/arm/mach-msm/Kconfig | 9 ++++++++- arch/arm/mach-msm/board-msm8x60.c | 7 +++++++ 2 files changed, 15 insertions(+), 1 deletions(-)
arch/arm/mach-msm/Kconfig +8 -1
@@ -38,7 +38,8 @@ config ARCH_MSM8X60 select ARM_GIC select CPU_V7 select MSM_V2_TLMM - select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM) + select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \ + && !MACH_MSM8X60_FFA) endchoice
@@ -109,6 +110,12 @@ config MACH_MSM8X60_SIM help Support for the Qualcomm MSM8x60 simulator. +config MACH_MSM8X60_FFA + depends on ARCH_MSM8X60 + bool "MSM8x60 FFA" + help + Support for the Qualcomm MSM8x60 FFA eval board. + endmenu config MSM_DEBUG_UART
arch/arm/mach-msm/board-msm8x60.c +7 -0
@@ -91,3 +91,10 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END + +MACHINE_START (MSM8X60_FFA ,"QCT MSM8X60 FFA" ) + .map_io = msm8x60_map_io, + .init_irq = msm8x60_init_irq, + .init_machine = msm8x60_init, + .timer = &msm_timer, +MACHINE_END
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 18/20 msm: Add MSM IOMMU support
In reply to Jeff OhlsteinFrom: Stepan Moskovchenko <[email protected]>
Add support for the IOMMUs found on the upcoming Qualcomm MSM8x60 chips. These IOMMUs allow virtualization of the address space used by most of the multimedia cores on these chips.
--- arch/arm/mach-msm/include/mach/iommu.h | 103 ++ arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h | 1871 ++++++++++++++++++++++++ arch/arm/mach-msm/iommu.c | 597 ++++++++ 3 files changed, 2571 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-msm/include/mach/iommu.h create mode 100644 arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h create mode 100644 arch/arm/mach-msm/iommu.c
arch/arm/mach-msm/include/mach/iommu.h new file +103 -0
@@ -0,0 +1,103 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 and +* only version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +* 02110-1301, USA. +*/ + +#ifndef MSM_IOMMU_H +#define MSM_IOMMU_H + +#include <linux/interrupt.h> + +/* Maximum number of Machine IDs that we are allowing to be mapped to the same +* context bank. The number of MIDs mapped to the same CB does not affect +* performance, but there is a practical limit on how many distinct MIDs may +* be present. These mappings are typically determined at design time and are +* not expected to change at run time. +*/ +#define MAX_NUM_MIDS 16 + +/** +* struct msm_iommu_dev - a single IOMMU hardware instance +* name Human-readable name given to this IOMMU HW instance +* clk_rate Rate to set for this IOMMU's clock, if applicable to this +* particular IOMMU. 0 means don't set a rate. +* -1 means it is an AXI clock with no valid rate +* +*/ +struct msm_iommu_dev { +const char *name; +int clk_rate; +}; + +/** +* struct msm_iommu_ctx_dev - an IOMMU context bank instance +* name Human-readable name given to this context bank +* num Index of this context bank within the hardware +* mids List of Machine IDs that are to be mapped into this context +* bank, terminated by -1. The MID is a set of signals on the +* AXI bus that identifies the function associated with a specific +* memory request. (See ARM spec). +*/ +struct msm_iommu_ctx_dev { +const char *name; +int num; +int mids[MAX_NUM_MIDS ]; +}; + + +/** +* struct msm_iommu_drvdata - A single IOMMU hardware instance +* @base: IOMMU config port base address (VA) +* @irq: Interrupt number +* +* A msm_iommu_drvdata holds the global driver data about a single piece +* of an IOMMU hardware instance. +*/ +struct msm_iommu_drvdata { +void __iomem *base; +int irq; +}; + +/** +* struct msm_iommu_ctx_drvdata - an IOMMU context bank instance +* @num: Hardware context number of this context +* @pdev: Platform device associated wit this HW instance +* @attached_elm: List element for domains to track which devices are +* attached to them +* +* A msm_iommu_ctx_drvdata holds the driver data for a single context bank +* within each IOMMU hardware instance +*/ +struct msm_iommu_ctx_drvdata { +int num; +struct platform_device *pdev; +struct list_head attached_elm; +}; + +/* +* Look up an IOMMU context device by its context name. NULL if none found. +* Useful for testing and drivers that do not yet fully have IOMMU stuff in +* their platform devices. +*/ +struct device *msm_iommu_get_ctx (const char *ctx_name); + +/* +* Interrupt handler for the IOMMU context fault interrupt. Hooking the +* interrupt is not supported in the API yet, but this will print an error +* message and dump useful IOMMU registers. +*/ +irqreturn_t msm_iommu_fault_handler (int irq,void *dev_id); + +#endif
arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h new file +1871 -0
1,871 lines not on this page · raw message
arch/arm/mach-msm/iommu.c new file +597 -0
597 lines not on this page · raw message
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 19/20 msm: Platform initialization for the IOMMU driver
In reply to Jeff OhlsteinFrom: Stepan Moskovchenko <[email protected]>
Register a driver for the MSM IOMMU devices and a driver for the translation context devices. Set up the global IOMMU registers and initialize the context banks.
--- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/iommu_dev.c | 364 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 365 insertions(+), 1 deletions(-) create mode 100644 arch/arm/mach-msm/iommu_dev.c
arch/arm/mach-msm/Makefile +1 -1
@@ -12,7 +12,7 @@ obj-y += irq.o endif endif -obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o gpio.c obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
arch/arm/mach-msm/iommu_dev.c new file +364 -0
364 lines not on this page · raw message
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
Re: [PATCH 19/20 v2] msm: Platform initialization for the IOMMU driver
Quoted 185 lines · Jeff Ohlstein
From: Stepan Moskovchenko <[email protected]>
Register a driver for the MSM IOMMU devices and a driver for the translation context devices. Set up the global IOMMU registers and initialize the context banks.
Signed-off-by Stepan Moskovchenko <[email protected]>--- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/iommu_dev.c | 364 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 365 insertions(+), 1 deletions(-) create mode 100644 arch/arm/mach-msm/iommu_dev.carch/arm/mach-msm/Makefile +1
-1@@ -12,7 +12,7 @@ obj-y += irq.o endif endif -obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o gpio.c obj-$(CONFIG_ARCH_QSD8X50) += sirc.oarch/arm/mach-msm/iommu_dev.c new file +153
-0@@ -0,0 +1,364 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 and +* only version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +* 02110-1301, USA. +*/ + +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/iommu.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/slab.h> + +#include <mach/iommu_hw-8xxx.h> +#include <mach/iommu.h> + +struct iommu_ctx_iter_data { +/* input */ +const char *name; + +/* output */ +struct device *dev; +}; + +static struct platform_device *msm_iommu_root_dev; + +static int each_iommu_ctx (struct device *dev,void *data) +{ +struct iommu_ctx_iter_data *res = data; +struct msm_iommu_ctx_dev *c = dev->platform_data; + +if (!res || !c || !c->name || !res->name) +return -EINVAL ; + +if (!strcmp (res->name, c->name)) { + res->dev = dev; +return 1 ; + } +return 0 ; +} + +static int each_iommu (struct device *dev,void *data) +{ +return device_for_each_child (dev, data, each_iommu_ctx); +} + +struct device *msm_iommu_get_ctx (const char *ctx_name) +{ +struct iommu_ctx_iter_data r; +int found; + +if (!msm_iommu_root_dev) { +pr_err ("No root IOMMU device.\n" ); + goto fail; + } + + r.name = ctx_name; + found =device_for_each_child (&msm_iommu_root_dev->dev, &r, each_iommu); + +if (!found) { +pr_err ("Could not find context <%s>\n" , ctx_name); + goto fail; + } + +return r.dev; +fail: +return NULL ; +} +EXPORT_SYMBOL (msm_iommu_get_ctx); + +static void msm_iommu_reset (void __iomem *base) +{ +int ctx, ncb; + +SET_RPUE (base,0 ); +SET_RPUEIE (base,0 ); +SET_ESRRESTORE (base,0 ); +SET_TBE (base,0 ); +SET_CR (base,0 ); +SET_SPDMBE (base,0 ); +SET_TESTBUSCR (base,0 ); +SET_TLBRSW (base,0 ); +SET_GLOBAL_TLBIALL (base,0 ); +SET_RPU_ACR (base,0 ); +SET_TLBLKCRWE (base,1 ); + ncb =GET_NCB (base)+1 ; + +for (ctx =0 ; ctx < ncb; ctx++) { +SET_BPRCOSH (base, ctx,0 ); +SET_BPRCISH (base, ctx,0 ); +SET_BPRCNSH (base, ctx,0 ); +SET_BPSHCFG (base, ctx,0 ); +SET_BPMTCFG (base, ctx,0 ); +SET_ACTLR (base, ctx,0 ); +SET_SCTLR (base, ctx,0 ); +SET_FSRRESTORE (base, ctx,0 ); +SET_TTBR0 (base, ctx,0 ); +SET_TTBR1 (base, ctx,0 ); +SET_TTBCR (base, ctx,0 ); +SET_BFBCR (base, ctx,0 ); +SET_PAR (base, ctx,0 ); +SET_FAR (base, ctx,0 ); +SET_CTX_TLBIALL (base, ctx,0 ); +SET_TLBFLPTER (base, ctx,0 ); +SET_TLBSLPTER (base, ctx,0 ); +SET_TLBLKCR (base, ctx,0 ); +SET_PRRR (base, ctx,0 ); +SET_NMRR (base, ctx,0 ); +SET_CONTEXTIDR (base, ctx,0 ); + } +} + +static int msm_iommu_probe (struct platform_device *pdev) +{ +struct resource *r; +struct clk *iommu_clk; +struct msm_iommu_drvdata *drvdata; +struct msm_iommu_dev *iommu_dev = pdev->dev.platform_data; +void __iomem *regs_base; +resource_size_t len; +int ret =0 , ncb, nm2v, irq; + +if (pdev->id !=-1 ) { + drvdata =kzalloc (sizeof (*drvdata),GFP_KERNEL ); + +if (!drvdata) { + ret = -ENOMEM ; + goto fail; + } + +if (!iommu_dev) { + ret = -ENODEV ; + goto fail; + } + +if (iommu_dev->clk_rate !=0 ) { + iommu_clk =clk_get (&pdev->dev,"iommu_clk" );
arch/arm/mach-msm/iommu_dev.c line 163
Quoted 10 lines
arch/arm/mach-msm/iommu_dev.c new file +10
-0+ +if (IS_ERR (iommu_clk)) { + ret = -ENODEV ; + goto fail; + } + +if (iommu_dev->clk_rate >0 ) +clk_set_rate (iommu_clk, iommu_dev->clk_rate); + +clk_enable (iommu_clk);
Steve,
What happens if clk_enable fails? Doesn't look like your handling that case here.
Daniel
Signature · 3 lines
Sent by an consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH 1/1 msm: Platform initialization for the IOMMU driver
Register a driver for the MSM IOMMU devices and a driver for the translation context devices. Set up the global IOMMU registers and initialize the context banks.
--- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/iommu_dev.c | 374 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 375 insertions(+), 1 deletions(-) create mode 100644 arch/arm/mach-msm/iommu_dev.c
arch/arm/mach-msm/Makefile +1 -1
@@ -12,7 +12,7 @@ obj-y += irq.o endif endif -obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o gpio.c obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
arch/arm/mach-msm/iommu_dev.c new file +374 -0
374 lines not on this page · raw message
--
1.7.3.1
Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
PATCH v2 20/20 msm: Platform data for msm8x60 IOMMUs
In reply to Jeff OhlsteinFrom: Stepan Moskovchenko <[email protected]>
Add the platform data for the IOMMUs found on the Qualcomm msm8x60 SoC.
--- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/devices-msm8x60-iommu.c | 883 +++++++++++++++++++++++ arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 33 + 3 files changed, 917 insertions(+), 1 deletions(-) create mode 100644 arch/arm/mach-msm/devices-msm8x60-iommu.c
arch/arm/mach-msm/Makefile +1 -1
@@ -12,7 +12,7 @@ obj-y += irq.o endif endif -obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o gpio.c obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
arch/arm/mach-msm/devices-msm8x60-iommu.c new file +883 -0
883 lines not on this page · raw message
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +33 -0
@@ -61,4 +61,37 @@#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4)#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24) +#define MSM_IOMMU_JPEGD_PHYS 0x07300000 +#define MSM_IOMMU_JPEGD_SIZE SZ_1M + +#define MSM_IOMMU_VPE_PHYS 0x07400000 +#define MSM_IOMMU_VPE_SIZE SZ_1M + +#define MSM_IOMMU_MDP0_PHYS 0x07500000 +#define MSM_IOMMU_MDP0_SIZE SZ_1M + +#define MSM_IOMMU_MDP1_PHYS 0x07600000 +#define MSM_IOMMU_MDP1_SIZE SZ_1M + +#define MSM_IOMMU_ROT_PHYS 0x07700000 +#define MSM_IOMMU_ROT_SIZE SZ_1M + +#define MSM_IOMMU_IJPEG_PHYS 0x07800000 +#define MSM_IOMMU_IJPEG_SIZE SZ_1M + +#define MSM_IOMMU_VFE_PHYS 0x07900000 +#define MSM_IOMMU_VFE_SIZE SZ_1M + +#define MSM_IOMMU_VCODEC_A_PHYS 0x07A00000 +#define MSM_IOMMU_VCODEC_A_SIZE SZ_1M + +#define MSM_IOMMU_VCODEC_B_PHYS 0x07B00000 +#define MSM_IOMMU_VCODEC_B_SIZE SZ_1M + +#define MSM_IOMMU_GFX3D_PHYS 0x07C00000 +#define MSM_IOMMU_GFX3D_SIZE SZ_1M + +#define MSM_IOMMU_GFX2D0_PHYS 0x07D00000 +#define MSM_IOMMU_GFX2D0_SIZE SZ_1M +#endif
Signature · 4 lines
1.7.2.1 Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.