usb: makefile cleanup
Subsystems (9)
PATCH 1/1 usb: makefile cleanup
For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file.
None of the dependencies are modified.
---
** Rebased onto linux-next **
Although they are not without a trace amount of subjectiveness, the changes made are intended to increase readability.
drivers/usb/atm/Makefile | 4 +- drivers/usb/c67x00/Makefile | 6 +- drivers/usb/core/Makefile | 19 +++------ drivers/usb/early/Makefile | 2 +- drivers/usb/gadget/Makefile | 39 +++++++++---------- drivers/usb/host/Makefile | 19 +++++---- drivers/usb/host/whci/Kbuild | 2 +- drivers/usb/misc/Makefile | 44 +++++++++++----------- drivers/usb/misc/sisusbvga/Makefile | 3 +- drivers/usb/mon/Makefile | 2 +- drivers/usb/musb/Makefile | 71 ++++++++-------------------------- drivers/usb/otg/Makefile | 7 +-- drivers/usb/serial/Makefile | 9 ++-- drivers/usb/storage/Makefile | 34 ++++++++-------- drivers/usb/wusbcore/Makefile | 17 ++++---- 15 files changed, 116 insertions(+), 162 deletions(-)
drivers/usb/atm/Makefile +2 -2
@@ -2,10 +2,10 @@ # Makefile for USB ATM/xDSL drivers # +ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG + obj-$(CONFIG_USB_CXACRU) += cxacru.o obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o obj-$(CONFIG_USB_UEAGLEATM) += ueagle-atm.o obj-$(CONFIG_USB_ATM) += usbatm.o obj-$(CONFIG_USB_XUSBATM) += xusbatm.o - -ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
drivers/usb/c67x00/Makefile +3 -3
@@ -2,8 +2,8 @@ # Makefile for Cypress C67X00 USB Controller # -ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG +ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG -obj-$(CONFIG_USB_C67X00_HCD) += c67x00.o +obj-$(CONFIG_USB_C67X00_HCD) += c67x00.o -c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o +c67x00-y := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
drivers/usb/core/Makefile +7 -12
@@ -2,18 +2,13 @@ # Makefile for USB Core files and filesystem # -usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \ - config.o file.o buffer.o sysfs.o endpoint.o \ - devio.o notify.o generic.o quirks.o devices.o - -ifeq ($(CONFIG_PCI),y) - usbcore-objs += hcd-pci.o -endif +ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG -ifeq ($(CONFIG_USB_DEVICEFS),y) - usbcore-objs += inode.o -endif +usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o +usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o +usbcore-y += devio.o notify.o generic.o quirks.o devices.o -obj-$(CONFIG_USB) += usbcore.o +usbcore-$(CONFIG_PCI) += hcd-pci.o +usbcore-$(CONFIG_USB_DEVICEFS) += inode.o -ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG +obj-$(CONFIG_USB) += usbcore.o
drivers/usb/early/Makefile +1 -1
@@ -2,4 +2,4 @@ # Makefile for early USB devices # -obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o +obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o
drivers/usb/gadget/Makefile +18 -21
@@ -1,7 +1,7 @@ # # USB peripheral controller drivers # -ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG +ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o obj-$(CONFIG_USB_NET2280) += net2280.o
@@ -16,10 +16,8 @@ obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o -fsl_usb2_udc-objs := fsl_udc_core.o -ifeq ($(CONFIG_ARCH_MXC),y) -fsl_usb2_udc-objs += fsl_mxc_udc.o -endif +fsl_usb2_udc-y := fsl_udc_core.o +fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
@@ -30,21 +28,21 @@ obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o # # USB gadget drivers # -g_zero-objs := zero.o -g_audio-objs := audio.o -g_ether-objs := ether.o -g_serial-objs := serial.o -g_midi-objs := gmidi.o -gadgetfs-objs := inode.o -g_file_storage-objs := file_storage.o -g_mass_storage-objs := mass_storage.o -g_printer-objs := printer.o -g_cdc-objs := cdc2.o -g_multi-objs := multi.o -g_hid-objs := hid.o -g_dbgp-objs := dbgp.o -g_nokia-objs := nokia.o -g_webcam-objs := webcam.o +g_zero-y := zero.o +g_audio-y := audio.o +g_ether-y := ether.o +g_serial-y := serial.o +g_midi-y := gmidi.o +gadgetfs-y := inode.o +g_file_storage-y := file_storage.o +g_mass_storage-y := mass_storage.o +g_printer-y := printer.o +g_cdc-y := cdc2.o +g_multi-y := multi.o +g_hid-y := hid.o +g_dbgp-y := dbgp.o +g_nokia-y := nokia.o +g_webcam-y := webcam.o obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_AUDIO) += g_audio.o
@@ -62,4 +60,3 @@ obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o obj-$(CONFIG_USB_G_MULTI) += g_multi.o obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o -
drivers/usb/host/Makefile +10 -9
@@ -2,15 +2,17 @@ # Makefile for USB Host Controller Drivers # -ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG +ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG -isp1760-objs := isp1760-hcd.o isp1760-if.o -fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \ - fhci-tds.o fhci-sched.o -ifeq ($(CONFIG_FHCI_DEBUG),y) -fhci-objs += fhci-dbg.o -endif -xhci-hcd-objs := xhci.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o +isp1760-y := isp1760-hcd.o isp1760-if.o + +fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o +fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o + +fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o + +xhci-hcd-y := xhci.o xhci-mem.o xhci-pci.o +xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o obj-$(CONFIG_USB_WHCI_HCD) += whci/
@@ -32,4 +34,3 @@ obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o -
drivers/usb/host/whci/Kbuild +1 -1
@@ -3,7 +3,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o whci-hcd-y := \ asl.o \ debug.o \ - hcd.o \ + hcd.o \ hw.o \ init.o \ int.o \
drivers/usb/misc/Makefile +22 -22
49 lines not on this page · raw message
drivers/usb/misc/sisusbvga/Makefile +1 -2
@@ -4,5 +4,4 @@ obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o -sisusbvga-objs := sisusb.o sisusb_init.o sisusb_con.o - +sisusbvga-y := sisusb.o sisusb_init.o sisusb_con.o
drivers/usb/mon/Makefile +1 -1
@@ -2,6 +2,6 @@ # Makefile for USB monitor # -usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o +usbmon-y := mon_main.o mon_stat.o mon_text.o mon_bin.o obj-$(CONFIG_USB_MON) += usbmon.o
drivers/usb/musb/Makefile +17 -54
94 lines not on this page · raw message
drivers/usb/otg/Makefile +3 -4
@@ -2,6 +2,9 @@ # OTG infrastructure and transceiver drivers # +ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG +ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG + # infrastructure obj-$(CONFIG_USB_OTG_UTILS) += otg.o
@@ -12,7 +15,3 @@ obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o obj-$(CONFIG_USB_ULPI) += ulpi.o - -ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG -ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG -
drivers/usb/serial/Makefile +4 -5
@@ -6,10 +6,10 @@ obj-$(CONFIG_USB_SERIAL) += usbserial.o -usbserial-obj-$(CONFIG_USB_SERIAL_CONSOLE) += console.o -usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o +usbserial-y := usb-serial.o generic.o bus.o -usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) +usbserial-$(CONFIG_USB_SERIAL_CONSOLE) += console.o +usbserial-$(CONFIG_USB_EZUSB) += ezusb.o obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
@@ -59,6 +59,5 @@ obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o -obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o +obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o -
drivers/usb/storage/Makefile +17 -17
@@ -5,21 +5,21 @@ # Rewritten to use lists instead of if-statements. # -ccflags-y := -Idrivers/scsi +ccflags-y := -Idrivers/scsi obj-$(CONFIG_USB_UAS) += uas.o obj-$(CONFIG_USB_STORAGE) += usb-storage.o -usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o +usb-storage-y := scsiglue.o protocol.o transport.o usb.o +usb-storage-y += initializers.o sierra_ms.o option_ms.o -usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ - initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y) +usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o ifeq ($(CONFIG_USB_LIBUSUAL),) - usb-storage-objs += usual-tables.o + usb-storage-y += usual-tables.o else obj-$(CONFIG_USB) += usb-libusual.o - usb-libusual-objs := libusual.o usual-tables.o + usb-libusual-y := libusual.o usual-tables.o endif obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
@@ -34,14 +34,14 @@ obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o -ums-alauda-objs := alauda.o -ums-cypress-objs := cypress_atacb.o -ums-datafab-objs := datafab.o -ums-freecom-objs := freecom.o -ums-isd200-objs := isd200.o -ums-jumpshot-objs := jumpshot.o -ums-karma-objs := karma.o -ums-onetouch-objs := onetouch.o -ums-sddr09-objs := sddr09.o -ums-sddr55-objs := sddr55.o -ums-usbat-objs := shuttle_usbat.o +ums-alauda-y := alauda.o +ums-cypress-y := cypress_atacb.o +ums-datafab-y := datafab.o +ums-freecom-y := freecom.o +ums-isd200-y := isd200.o +ums-jumpshot-y := jumpshot.o +ums-karma-y := karma.o +ums-onetouch-y := onetouch.o +ums-sddr09-y := sddr09.o +ums-sddr55-y := sddr55.o +ums-usbat-y := shuttle_usbat.o
drivers/usb/wusbcore/Makefile +9 -8
@@ -1,9 +1,11 @@ +ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG + obj-$(CONFIG_USB_WUSB) += wusbcore.o obj-$(CONFIG_USB_HWA_HCD) += wusb-wa.o obj-$(CONFIG_USB_WUSB_CBAF) += wusb-cbaf.o -wusbcore-objs := \ +wusbcore-y := \ crypto.o \ devconnect.o \ dev-sysfs.o \
@@ -14,11 +16,10 @@ wusbcore-objs := \ security.o \ wusbhc.o -wusb-cbaf-objs := cbaf.o +wusb-cbaf-y := cbaf.o -wusb-wa-objs := wa-hc.o \ - wa-nep.o \ - wa-rpipe.o \ - wa-xfer.o - -ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG +wusb-wa-y := \ + wa-hc.o \ + wa-nep.o \ + wa-rpipe.o \ + wa-xfer.o
Signature · 1 line
1.7.2.3
Hi,
Quoted 9 lines · matt mooney
For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file.
None of the dependencies are modified.
Signed-off-by matt mooney <[email protected]>Acked-by Sam Ravnborg <[email protected]>
for musb parts:
Signature · 1 line
balbi