Skip to contentSkip to conversation

binutils_2.20.1.bb: Updates to use libtool 2.4 macros

PATCH In review Khem Raj 2 participants 3 messages Oct 8, 2010

lore
Share & tools
lore

Khem Raj

author
#0 lore raw

PATCH 7/7 binutils_2.20.1.bb: Updates to use libtool 2.4 macros

This patch is needed to get binutils compiling with libtool 2.4

* Use this patch conditionally only if libtool 2.4 is selected

---
 .../binutils-2.20.1/libtool-2.4-update.patch       |31174 ++++++++++++++++++++
 recipes/binutils/binutils_2.20.1.bb                |    4 +-
 2 files changed, 31176 insertions(+), 2 deletions(-)
 create mode 100644 recipes/binutils/binutils-2.20.1/libtool-2.4-update.patch
recipes/binutils/binutils-2.20.1/libtool-2.4-update.patch new file +31174 -0
new file mode 100644
index 0000000..dcb20e9
@@ -0,0 +1,31174 @@
+Index: binutils-2.20.1/ltmain.sh
+===================================================================
+--- binutils-2.20.1.orig/ltmain.sh
++++ binutils-2.20.1/ltmain.sh
+@@ -1,9 +1,9 @@
+-# Generated from ltmain.m4sh.
+ 
+-# ltmain.sh (GNU libtool) 2.2.6
++# libtool (GNU libtool) 2.4
+ # Written by Gordon Matzigkeit <[email protected]>, 1996
+ 
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
++# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+ # This is free software; see the source for copying conditions.  There is NO
+ # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ 
+@@ -32,50 +32,56 @@
+ #
+ # Provide generalized library-building support services.
+ #
+-#     --config             show all configuration variables
+-#     --debug              enable verbose shell tracing
+-# -n, --dry-run            display commands without modifying any files
+-#     --features           display basic configuration information and exit
+-#     --mode=MODE          use operation mode MODE
+-#     --preserve-dup-deps  don't remove duplicate dependency libraries
+-#     --quiet, --silent    don't print informational messages
+-#     --tag=TAG            use configuration variables from tag TAG
+-# -v, --verbose            print informational messages (default)
+-#     --version            print version information
+-# -h, --help               print short or long help message
++#       --config             show all configuration variables
++#       --debug              enable verbose shell tracing
++#   -n, --dry-run            display commands without modifying any files
++#       --features           display basic configuration information and exit
++#       --mode=MODE          use operation mode MODE
++#       --preserve-dup-deps  don't remove duplicate dependency libraries
++#       --quiet, --silent    don't print informational messages
++#       --no-quiet, --no-silent
++#                            print informational messages (default)
++#       --tag=TAG            use configuration variables from tag TAG
++#   -v, --verbose            print more informational messages than default
++#       --no-verbose         don't print the extra informational messages
++#       --version            print version information
++#   -h, --help, --help-all   print short, long, or detailed help message
+ #
+ # MODE must be one of the following:
+ #
+-#       clean              remove files from the build directory
+-#       compile            compile a source file into a libtool object
+-#       execute            automatically set library path, then run a program
+-#       finish             complete the installation of libtool libraries
+-#       install            install libraries or executables
+-#       link               create a library or an executable
+-#       uninstall          remove libraries from an installed directory
++#         clean              remove files from the build directory
++#         compile            compile a source file into a libtool object
++#         execute            automatically set library path, then run a program
++#         finish             complete the installation of libtool libraries
++#         install            install libraries or executables
++#         link               create a library or an executable
++#         uninstall          remove libraries from an installed directory
+ #
+-# MODE-ARGS vary depending on the MODE.
++# MODE-ARGS vary depending on the MODE.  When passed as first option,
++# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+ # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+ #
+ # When reporting a bug, please describe a test case to reproduce it and
+ # include the following information:
+ #
+-#       host-triplet:	$host
+-#       shell:		$SHELL
+-#       compiler:		$LTCC
+-#       compiler flags:		$LTCFLAGS
+-#       linker:		$LD (gnu? $with_gnu_ld)
+-#       $progname:		(GNU libtool) 2.2.6
+-#       automake:		$automake_version
+-#       autoconf:		$autoconf_version
++#         host-triplet:	$host
++#         shell:		$SHELL
++#         compiler:		$LTCC
++#         compiler flags:		$LTCFLAGS
++#         linker:		$LD (gnu? $with_gnu_ld)
++#         $progname:	(GNU libtool) 2.4
++#         automake:	$automake_version
++#         autoconf:	$autoconf_version
+ #
+ # Report bugs to <[email protected]>.
++# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
++# General help using GNU software: <http://www.gnu.org/gethelp/>.
+ 
+-PROGRAM=ltmain.sh
++PROGRAM=libtool
+ PACKAGE=libtool
+-VERSION=2.2.6
++VERSION=2.4
+ TIMESTAMP=""
+-package_revision=1.3012
++package_revision=1.3293
+ 
+ # Be Bourne compatible
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+@@ -91,10 +97,15 @@ fi
+ BIN_SH=xpg4; export BIN_SH # for Tru64
+ DUALCASE=1; export DUALCASE # for MKS sh
+ 
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++$1
++_LTECHO_EOF'
++}
++
+ # NLS nuisances: We save the old values to restore during execute mode.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+ lt_user_locale=
+ lt_safe_locale=
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+@@ -107,24 +118,33 @@ do
+ 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ 	fi"
+ done
++LC_ALL=C
++LANGUAGE=C
++export LANGUAGE LC_ALL
+ 
+ $lt_unset CDPATH
+ 
+ 
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
+ 
+ 
+ 
+ : ${CP="cp -f"}
+-: ${ECHO="echo"}
+-: ${EGREP="/usr/bin/grep -E"}
+-: ${FGREP="/usr/bin/grep -F"}
+-: ${GREP="/usr/bin/grep"}
++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
++: ${EGREP="/bin/grep -E"}
++: ${FGREP="/bin/grep -F"}
++: ${GREP="/bin/grep"}
+ : ${LN_S="ln -s"}
+ : ${MAKE="make"}
+ : ${MKDIR="mkdir"}
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
+-: ${SED="/opt/local/bin/gsed"}
++: ${SED="/bin/sed"}
+ : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+ : ${Xsed="$SED -e 1s/^X//"}
+ 
+@@ -144,6 +164,27 @@ IFS=" 	$lt_nl"
+ dirname="s,/[^/]*$,,"
+ basename="s,^.*/,,"
+ 
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++} # func_dirname may be replaced by extended shell implementation
++
++
++# func_basename file
++func_basename ()
++{
++    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
++} # func_basename may be replaced by extended shell implementation
++
++
+ # func_dirname_and_basename file append nondir_replacement
+ # perform func_basename and func_dirname in a single function
+ # call:
+@@ -158,24 +199,41 @@ basename="s,^.*/,,"
+ # those functions but instead duplicate the functionality here.
+ func_dirname_and_basename ()
+ {
+-  # Extract subdirectory from the argument.
+-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+-  if test "X$func_dirname_result" = "X${1}"; then
+-    func_dirname_result="${3}"
+-  else
+-    func_dirname_result="$func_dirname_result${2}"
+-  fi
+-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+-}
++    # Extract subdirectory from the argument.
++    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
++} # func_dirname_and_basename may be replaced by extended shell implementation
++
++
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++    case ${2} in
++      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++    esac
++} # func_stripname may be replaced by extended shell implementation
+ 
+-# Generated shell functions inserted here.
+ 
+ # These SED scripts presuppose an absolute path with a trailing slash.
+-pathcar="s,^/\([^/]*\).*$,\1,"
+-pathcdr="s,^/[^/]*,,"
+-removedotparts="s@/\(\./\)\{1,\}@/@g;s,/\.$,/,"
+-collapseslashes="s@/\{1,\}@/@g"
+-finalslash="s,/*$,/,"
++pathcar='s,^/\([^/]*\).*$,\1,'
++pathcdr='s,^/[^/]*,,'
++removedotparts=':dotsl
++		s@/\./@/@g
++		t dotsl
++		s,/\.$,/,'
++collapseslashes='s@/\{1,\}@/@g'
++finalslash='s,/*$,/,'
+ 
+ # func_normal_abspath PATH
+ # Remove doubled-up and trailing slashes, "." path components,
+@@ -315,21 +373,9 @@ func_relative_path ()
+   fi
+ }
+ 
+-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+-# is ksh but when the shell is invoked as "sh" and the current value of
+-# the _XPG environment variable is not equal to 1 (one), the special
+-# positional parameter $0, within a function call, is the name of the
+-# function.
+-progpath="$0"
+-
+ # The name of this program:
+-# In the unlikely event $progname began with a '-', it would play havoc with
+-# func_echo (imagine progname=-n), so we prepend ./ in that case:
+ func_dirname_and_basename "$progpath"
+ progname=$func_basename_result
+-case $progname in
+-  -*) progname=./$progname ;;
+-esac
+ 
+ # Make sure we have an absolute path for reexecution:
+ case $progpath in
+@@ -360,6 +406,15 @@ sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+ # Same as above, but do not quote variable references.
+ double_quote_subst='s/\(["`\\]\)/\\\1/g'
+ 
++# Sed substitution that turns a string into a regex matching for the
++# string literally.
++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
++
++# Sed substitution that converts a w32 file name or path
++# which contains forward slashes, into one that contains
++# (escaped) backslashes.  A very naive implementation.
++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
++
+ # Re-`\' parameter expansions in output of double_quote_subst that were
+ # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+ # in input to double_quote_subst, that '$' was protected from expansion.
+@@ -388,7 +443,7 @@ opt_warning=:
+ # name if it has been set yet.
+ func_echo ()
+ {
+-    $ECHO "$progname${mode+: }$mode: $*"
++    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+ }
+ 
+ # func_verbose arg...
+@@ -403,18 +458,25 @@ func_verbose ()
+     :
+ }
+ 
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++    $ECHO "$*"
++}
++
+ # func_error arg...
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+-    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
++    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ }
+ 
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+-    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
++    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+ 
+     # bash bug again:
+     :
+@@ -471,9 +533,9 @@ func_mkdir_p ()
+         case $my_directory_path in */*) ;; *) break ;; esac
+ 
+         # ...otherwise throw away the child directory and loop
+-        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
++        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+       done
+-      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
++      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ 
+       save_mkdir_p_IFS="$IFS"; IFS=':'
+       for my_dir in $my_dir_list; do
+@@ -523,7 +585,7 @@ func_mktempdir ()
+         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+     fi
+ 
+-    $ECHO "X$my_tmpdir" | $Xsed
++    $ECHO "$my_tmpdir"
+ }
+ 
+ 
+@@ -537,7 +599,7 @@ func_quote_for_eval ()
+ {
+     case $1 in
+       *[\\\`\"\$]*)
+-	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
++	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+       *)
+         func_quote_for_eval_unquoted_result="$1" ;;
+     esac
+@@ -564,7 +626,7 @@ func_quote_for_expand ()
+ {
+     case $1 in
+       *[\\\`\"]*)
+-	my_arg=`$ECHO "X$1" | $Xsed \
++	my_arg=`$ECHO "$1" | $SED \
+ 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+       *)
+         my_arg="$1" ;;
+@@ -633,15 +695,39 @@ func_show_eval_locale ()
+     fi
+ }
+ 
+-
+-
++# func_tr_sh
++# Turn $1 into a string suitable for a shell variable name.
++# Result is stored in $func_tr_sh_result.  All characters
++# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
++# if $1 begins with a digit, a '_' is prepended as well.
++func_tr_sh ()
++{
++  case $1 in
++  [0-9]* | *[!a-zA-Z0-9_]*)
++    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
++    ;;
++  * )
++    func_tr_sh_result=$1
++    ;;
++  esac
++}
+ 
+ 
+ # func_version
+ # Echo version message to standard output and exit.
+ func_version ()
+ {
+-    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
++    $opt_debug
++
++    $SED -n '/(C)/!b go
++	:more
++	/\./!{
++	  N
++	  s/\n# / /
++	  b more
++	}
++	:go
++	/^# '$PROGRAM' (GNU /,/# warranty; / {
+         s/^# //
+ 	s/^# *$//
+         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+@@ -654,22 +740,28 @@ func_version ()
+ # Echo short help message to standard output and exit.
+ func_usage ()
+ {
+-    $SED -n '/^# Usage:/,/# -h/ {
++    $opt_debug
++
++    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+         s/^# //
+ 	s/^# *$//
+ 	s/\$progname/'$progname'/
+ 	p
+     }' < "$progpath"
+-    $ECHO
++    echo
+     $ECHO "run \`$progname --help | more' for full usage"
+     exit $?
+ }
+ 
+-# func_help
+-# Echo long help message to standard output and exit.
++# func_help [NOEXIT]
++# Echo long help message to standard output and exit,
++# unless 'noexit' is passed as argument.
+ func_help ()
+ {
++    $opt_debug
++
+     $SED -n '/^# Usage:/,/# Report bugs to/ {
++	:print
+         s/^# //
+ 	s/^# *$//
+ 	s*\$progname*'$progname'*
+@@ -682,8 +774,15 @@ func_help ()
+ 	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ 	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ 	p
+-     }' < "$progpath"
+-    exit $?
++	d
++     }
++     /^# .* home page:/b print
++     /^# General help using/b print
++     ' < "$progpath"
++    ret=$?
++    if test -z "$1"; then
++      exit $ret
++    fi
+ }
+ 
+ # func_missing_arg argname
+@@ -691,63 +790,106 @@ func_help ()
+ # exit_cmd.
+ func_missing_arg ()
+ {
+-    func_error "missing argument for $1"
++    $opt_debug
++
++    func_error "missing argument for $1."
+     exit_cmd=exit
+ }
+ 
+-exit_cmd=:
+ 
++# func_split_short_opt shortopt
++# Set func_split_short_opt_name and func_split_short_opt_arg shell
++# variables after splitting SHORTOPT after the 2nd character.
++func_split_short_opt ()
++{
++    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
++    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
++
++    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
++    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
++} # func_split_short_opt may be replaced by extended shell implementation
++
++
++# func_split_long_opt longopt
++# Set func_split_long_opt_name and func_split_long_opt_arg shell
++# variables after splitting LONGOPT at the `=' sign.
++func_split_long_opt ()
++{
++    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
++    my_sed_long_arg='1s/^--[^=]*=//'
++
++    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
++    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
++} # func_split_long_opt may be replaced by extended shell implementation
+ 
++exit_cmd=:
+ 
+ 
+ 
+-# Check that we have a working $ECHO.
+-if test "X$1" = X--no-reexec; then
+-  # Discard the --no-reexec flag, and continue.
+-  shift
+-elif test "X$1" = X--fallback-echo; then
+-  # Avoid inline document here, it may be left over
+-  :
+-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+-  # Yippee, $ECHO works!
+-  :
+-else
+-  # Restart under the correct shell, and then maybe $ECHO will work.
+-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+-fi
+ 
+-if test "X$1" = X--fallback-echo; then
+-  # used as fallback echo
+-  shift
+-  cat <<EOF
+-$*
+-EOF
+-  exit $EXIT_SUCCESS
+-fi
+ 
+ magic="%%%MAGIC variable%%%"
+ magic_exe="%%%MAGIC EXE variable%%%"
+ 
+ # Global variables.
+-# $mode is unset
+ nonopt=
+-execute_dlfiles=
+ preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
+ extracted_archives=
+ extracted_serial=0
+ 
+-opt_dry_run=false
+-opt_duplicate_deps=false
+-opt_silent=false
+-opt_debug=:
+-
+ # If this variable is set in any of the actions, the command in it
+ # will be execed at the end.  This prevents here-documents from being
+ # left over by shells.
+ exec_cmd=
+ 
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++    eval "${1}=\$${1}\${2}"
++} # func_append may be replaced by extended shell implementation
++
++# func_append_quoted var value
++# Quote VALUE and append to the end of shell variable VAR, separated
++# by a space.
++func_append_quoted ()
++{
++    func_quote_for_eval "${2}"
++    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
++} # func_append_quoted may be replaced by extended shell implementation
++
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++    func_arith_result=`expr "${@}"`
++} # func_arith may be replaced by extended shell implementation
++
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
++} # func_len may be replaced by extended shell implementation
++
++
++# func_lo2o object
++func_lo2o ()
++{
++    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
++} # func_lo2o may be replaced by extended shell implementation
++
++
++# func_xform libobj-or-source
++func_xform ()
++{
++    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
++} # func_xform may be replaced by extended shell implementation
++
++
+ # func_fatal_configuration arg...
+ # Echo program name prefixed message to standard error, followed by
+ # a configuration failure hint, and exit.
+@@ -781,16 +923,16 @@ func_config ()
+ # Display the features supported by this script.
+ func_features ()
+ {
+-    $ECHO "host: $host"
++    echo "host: $host"
+     if test "$build_libtool_libs" = yes; then
+-      $ECHO "enable shared libraries"
++      echo "enable shared libraries"
+     else
+-      $ECHO "disable shared libraries"
++      echo "disable shared libraries"
+     fi
+     if test "$build_old_libs" = yes; then
+-      $ECHO "enable static libraries"
++      echo "enable static libraries"
+     else
+-      $ECHO "disable static libraries"
++      echo "disable static libraries"
+     fi
+ 
+     exit $?
+@@ -837,117 +979,204 @@ func_enable_tag ()
+   esac
+ }
+ 
+-# Parse options once, thoroughly.  This comes as soon as possible in
+-# the script to make things like `libtool --version' happen quickly.
++# func_check_version_match
++# Ensure that we are using m4 macros, and libtool script from the same
++# release of libtool.
++func_check_version_match ()
+ {
++  if test "$package_revision" != "$macro_revision"; then
++    if test "$VERSION" != "$macro_version"; then
++      if test -z "$macro_version"; then
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from an older release.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++      else
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++      fi
++    else
++      cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
++$progname: but the definition of this LT_INIT comes from revision $macro_revision.
++$progname: You should recreate aclocal.m4 with macros from revision $package_revision
++$progname: of $PACKAGE $VERSION and run autoconf again.
++_LT_EOF
++    fi
++
++    exit $EXIT_MISMATCH
++  fi
++}
++
++
++# Shorthand for --mode=foo, only valid as the first argument
++case $1 in
++clean|clea|cle|cl)
++  shift; set dummy --mode clean ${1+"$@"}; shift
++  ;;
++compile|compil|compi|comp|com|co|c)
++  shift; set dummy --mode compile ${1+"$@"}; shift
++  ;;
++execute|execut|execu|exec|exe|ex|e)
++  shift; set dummy --mode execute ${1+"$@"}; shift
++  ;;
++finish|finis|fini|fin|fi|f)
++  shift; set dummy --mode finish ${1+"$@"}; shift
++  ;;
++install|instal|insta|inst|ins|in|i)
++  shift; set dummy --mode install ${1+"$@"}; shift
++  ;;
++link|lin|li|l)
++  shift; set dummy --mode link ${1+"$@"}; shift
++  ;;
++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
++  shift; set dummy --mode uninstall ${1+"$@"}; shift
++  ;;
++esac
++
++
++
++# Option defaults:
++opt_debug=:
++opt_dry_run=false
++opt_config=false
++opt_preserve_dup_deps=false
++opt_features=false
++opt_finish=false
++opt_help=false
++opt_help_all=false
++opt_silent=:
++opt_verbose=:
++opt_silent=false
++opt_verbose=false
+ 
+-  # Shorthand for --mode=foo, only valid as the first argument
+-  case $1 in
+-  clean|clea|cle|cl)
+-    shift; set dummy --mode clean ${1+"$@"}; shift
+-    ;;
+-  compile|compil|compi|comp|com|co|c)
+-    shift; set dummy --mode compile ${1+"$@"}; shift
+-    ;;
+-  execute|execut|execu|exec|exe|ex|e)
+-    shift; set dummy --mode execute ${1+"$@"}; shift
+-    ;;
+-  finish|finis|fini|fin|fi|f)
+-    shift; set dummy --mode finish ${1+"$@"}; shift
+-    ;;
+-  install|instal|insta|inst|ins|in|i)
+-    shift; set dummy --mode install ${1+"$@"}; shift
+-    ;;
+-  link|lin|li|l)
+-    shift; set dummy --mode link ${1+"$@"}; shift
+-    ;;
+-  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+-    shift; set dummy --mode uninstall ${1+"$@"}; shift
+-    ;;
+-  esac
+ 
+-  # Parse non-mode specific arguments:
+-  while test "$#" -gt 0; do
++# Parse options once, thoroughly.  This comes as soon as possible in the
++# script to make things like `--version' happen as quickly as we can.
++{
++  # this just eases exit handling
++  while test $# -gt 0; do
+     opt="$1"
+     shift
+-
+     case $opt in
+-      --config)		func_config					;;
+-
+-      --debug)		preserve_args="$preserve_args $opt"
++      --debug|-x)	opt_debug='set -x'
+ 			func_echo "enabling shell trace mode"
+-			opt_debug='set -x'
+ 			$opt_debug
+ 			;;
+-
+-      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+-			execute_dlfiles="$execute_dlfiles $1"
+-			shift
++      --dry-run|--dryrun|-n)
++			opt_dry_run=:
+ 			;;
+-
+-      --dry-run | -n)	opt_dry_run=:					;;
+-      --features)       func_features					;;
+-      --finish)		mode="finish"					;;
+-
+-      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+-			case $1 in
+-			  # Valid mode arguments:
+-			  clean)	;;
+-			  compile)	;;
+-			  execute)	;;
+-			  finish)	;;
+-			  install)	;;
+-			  link)		;;
+-			  relink)	;;
+-			  uninstall)	;;
+-
+-			  # Catch anything else as an error
+-			  *) func_error "invalid argument for $opt"
+-			     exit_cmd=exit
+-			     break
+-			     ;;
+-		        esac
+-
+-			mode="$1"
++      --config)
++			opt_config=:
++func_config
++			;;
++      --dlopen|-dlopen)
++			optarg="$1"
++			opt_dlopen="${opt_dlopen+$opt_dlopen
++}$optarg"
+ 			shift
+ 			;;
+-
+       --preserve-dup-deps)
+-			opt_duplicate_deps=:				;;
+-
+-      --quiet|--silent)	preserve_args="$preserve_args $opt"
+-			opt_silent=:
++			opt_preserve_dup_deps=:
+ 			;;
+-
+-      --verbose| -v)	preserve_args="$preserve_args $opt"
++      --features)
++			opt_features=:
++func_features
++			;;
++      --finish)
++			opt_finish=:
++set dummy --mode finish ${1+"$@"}; shift
++			;;
++      --help)
++			opt_help=:
++			;;
++      --help-all)
++			opt_help_all=:
++opt_help=': help-all'
++			;;
++      --mode)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_mode="$optarg"
++case $optarg in
++  # Valid mode arguments:
++  clean|compile|execute|finish|install|link|relink|uninstall) ;;
++
++  # Catch anything else as an error
++  *) func_error "invalid argument for $opt"
++     exit_cmd=exit
++     break
++     ;;
++esac
++			shift
++			;;
++      --no-silent|--no-quiet)
+ 			opt_silent=false
++func_append preserve_args " $opt"
+ 			;;
+-
+-      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+-			preserve_args="$preserve_args $opt $1"
+-			func_enable_tag "$1"	# tagname is set here
++      --no-verbose)
++			opt_verbose=false
++func_append preserve_args " $opt"
++			;;
++      --silent|--quiet)
++			opt_silent=:
++func_append preserve_args " $opt"
++        opt_verbose=false
++			;;
++      --verbose|-v)
++			opt_verbose=:
++func_append preserve_args " $opt"
++opt_silent=false
++			;;
++      --tag)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_tag="$optarg"
++func_append preserve_args " $opt $optarg"
++func_enable_tag "$optarg"
+ 			shift
+ 			;;
+ 
++      -\?|-h)		func_usage				;;
++      --help)		func_help				;;
++      --version)	func_version				;;
++
+       # Separate optargs to long options:
+-      -dlopen=*|--mode=*|--tag=*)
+-			func_opt_split "$opt"
+-			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
++      --*=*)
++			func_split_long_opt "$opt"
++			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ 			shift
+ 			;;
+ 
+-      -\?|-h)		func_usage					;;
+-      --help)		opt_help=:					;;
+-      --version)	func_version					;;
+-
+-      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
+-
+-      *)		nonopt="$opt"
+-			break
++      # Separate non-argument short options:
++      -\?*|-h*|-n*|-v*)
++			func_split_short_opt "$opt"
++			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
++			shift
+ 			;;
++
++      --)		break					;;
++      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
++      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+     esac
+   done
+ 
++  # Validate options:
++
++  # save first non-option argument
++  if test "$#" -gt 0; then
++    nonopt="$opt"
++    shift
++  fi
++
++  # preserve --debug
++  test "$opt_debug" = : || func_append preserve_args " --debug"
+ 
+   case $host in
+     *cygwin* | *mingw* | *pw32* | *cegcc*)
+@@ -955,82 +1184,44 @@ func_enable_tag ()
+       opt_duplicate_compiler_generated_deps=:
+       ;;
+     *)
+-      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
++      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+       ;;
+   esac
+ 
+-  # Having warned about all mis-specified options, bail out if
+-  # anything was wrong.
+-  $exit_cmd $EXIT_FAILURE
+-}
++  $opt_help || {
++    # Sanity checks first:
++    func_check_version_match
+ 
+-# func_check_version_match
+-# Ensure that we are using m4 macros, and libtool script from the same
+-# release of libtool.
+-func_check_version_match ()
+-{
+-  if test "$package_revision" != "$macro_revision"; then
+-    if test "$VERSION" != "$macro_version"; then
+-      if test -z "$macro_version"; then
+-        cat >&2 <<_LT_EOF
+-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+-$progname: definition of this LT_INIT comes from an older release.
+-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+-$progname: and run autoconf again.
+-_LT_EOF
+-      else
+-        cat >&2 <<_LT_EOF
+-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+-$progname: and run autoconf again.
+-_LT_EOF
+-      fi
+-    else
+-      cat >&2 <<_LT_EOF
+-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+-$progname: of $PACKAGE $VERSION and run autoconf again.
+-_LT_EOF
++    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++      func_fatal_configuration "not configured to build any kind of library"
+     fi
+ 
+-    exit $EXIT_MISMATCH
+-  fi
+-}
+-
++    # Darwin sucks
++    eval std_shrext=\"$shrext_cmds\"
+ 
+-## ----------- ##
+-##    Main.    ##
+-## ----------- ##
+-
+-$opt_help || {
+-  # Sanity checks first:
+-  func_check_version_match
+-
+-  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+-    func_fatal_configuration "not configured to build any kind of library"
+-  fi
++    # Only execute mode is allowed to have -dlopen flags.
++    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
++      func_error "unrecognized option \`-dlopen'"
++      $ECHO "$help" 1>&2
++      exit $EXIT_FAILURE
++    fi
+ 
+-  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
++    # Change the help message to a mode-specific one.
++    generic_help="$help"
++    help="Try \`$progname --help --mode=$opt_mode' for more information."
++  }
+ 
+ 
+-  # Darwin sucks
+-  eval std_shrext=\"$shrext_cmds\"
++  # Bail if the options were screwed
++  $exit_cmd $EXIT_FAILURE
++}
+ 
+ 
+-  # Only execute mode is allowed to have -dlopen flags.
+-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+-    func_error "unrecognized option \`-dlopen'"
+-    $ECHO "$help" 1>&2
+-    exit $EXIT_FAILURE
+-  fi
+ 
+-  # Change the help message to a mode-specific one.
+-  generic_help="$help"
+-  help="Try \`$progname --help --mode=$mode' for more information."
+-}
+ 
++## ----------- ##
++##    Main.    ##
++## ----------- ##
+ 
+ # func_lalib_p file
+ # True iff FILE is a libtool `.la' library or `.lo' object file.
+@@ -1095,12 +1286,9 @@ func_ltwrapper_executable_p ()
+ # temporary ltwrapper_script.
+ func_ltwrapper_scriptname ()
+ {
+-    func_ltwrapper_scriptname_result=""
+-    if func_ltwrapper_executable_p "$1"; then
+-	func_dirname_and_basename "$1" "" "."
+-	func_stripname '' '.exe' "$func_basename_result"
+-	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+-    fi
++    func_dirname_and_basename "$1" "" "."
++    func_stripname '' '.exe' "$func_basename_result"
++    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ }
+ 
+ # func_ltwrapper_p file
+@@ -1146,6 +1334,37 @@ func_source ()
+ }
+ 
+ 
++# func_resolve_sysroot PATH
++# Replace a leading = in PATH with a sysroot.  Store the result into
++# func_resolve_sysroot_result
++func_resolve_sysroot ()
++{
++  func_resolve_sysroot_result=$1
++  case $func_resolve_sysroot_result in
++  =*)
++    func_stripname '=' '' "$func_resolve_sysroot_result"
++    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
++    ;;
++  esac
++}
++
++# func_replace_sysroot PATH
++# If PATH begins with the sysroot, replace it with = and
++# store the result into func_replace_sysroot_result.
++func_replace_sysroot ()
++{
++  case "$lt_sysroot:$1" in
++  ?*:"$lt_sysroot"*)
++    func_stripname "$lt_sysroot" '' "$1"
++    func_replace_sysroot_result="=$func_stripname_result"
++    ;;
++  *)
++    # Including no sysroot.
++    func_replace_sysroot_result=$1
++    ;;
++  esac
++}
++
+ # func_infer_tag arg
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+@@ -1158,13 +1377,15 @@ func_infer_tag ()
+     if test -n "$available_tags" && test -z "$tagname"; then
+       CC_quoted=
+       for arg in $CC; do
+-        func_quote_for_eval "$arg"
+-	CC_quoted="$CC_quoted $func_quote_for_eval_result"
++	func_append_quoted CC_quoted "$arg"
+       done
++      CC_expanded=`func_echo_all $CC`
++      CC_quoted_expanded=`func_echo_all $CC_quoted`
+       case $@ in
+       # Blanks in the command may have been stripped by the calling shell,
+       # but not from the CC environment variable when configure was run.
+-      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
++      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+       # Blanks at the start of $base_compile will cause this to fail
+       # if we don't check for them as well.
+       *)
+@@ -1175,11 +1396,13 @@ func_infer_tag ()
+ 	    CC_quoted=
+ 	    for arg in $CC; do
+ 	      # Double-quote args containing other shell metacharacters.
+-	      func_quote_for_eval "$arg"
+-	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
++	      func_append_quoted CC_quoted "$arg"
+ 	    done
++	    CC_expanded=`func_echo_all $CC`
++	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+ 	    case "$@ " in
+-	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
++	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ 	      # The compiler in the base compile command matches
+ 	      # the one in the tagged configuration.
+ 	      # Assume this is the tagged configuration we want.
+@@ -1242,6 +1465,486 @@ EOF
+     }
+ }
+ 
++
++##################################################
++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
++##################################################
++
++# func_convert_core_file_wine_to_w32 ARG
++# Helper function used by file name conversion functions when $build is *nix,
++# and $host is mingw, cygwin, or some other w32 environment. Relies on a
++# correctly configured wine environment available, with the winepath program
++# in $build's $PATH.
++#
++# ARG is the $build file name to be converted to w32 format.
++# Result is available in $func_convert_core_file_wine_to_w32_result, and will
++# be empty on error (or when ARG is empty)
++func_convert_core_file_wine_to_w32 ()
++{
++  $opt_debug
++  func_convert_core_file_wine_to_w32_result="$1"
++  if test -n "$1"; then
++    # Unfortunately, winepath does not exit with a non-zero error code, so we
++    # are forced to check the contents of stdout. On the other hand, if the
++    # command is not found, the shell will set an exit code of 127 and print
++    # *an error message* to stdout. So we must check for both error code of
++    # zero AND non-empty stdout, which explains the odd construction:
++    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
++    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
++      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
++        $SED -e "$lt_sed_naive_backslashify"`
++    else
++      func_convert_core_file_wine_to_w32_result=
++    fi
++  fi
++}
++# end: func_convert_core_file_wine_to_w32
++
++
++# func_convert_core_path_wine_to_w32 ARG
++# Helper function used by path conversion functions when $build is *nix, and
++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
++# configured wine environment available, with the winepath program in $build's
++# $PATH. Assumes ARG has no leading or trailing path separator characters.
++#
++# ARG is path to be converted from $build format to win32.
++# Result is available in $func_convert_core_path_wine_to_w32_result.
++# Unconvertible file (directory) names in ARG are skipped; if no directory names
++# are convertible, then the result may be empty.
++func_convert_core_path_wine_to_w32 ()
++{
++  $opt_debug
++  # unfortunately, winepath doesn't convert paths, only file names
++  func_convert_core_path_wine_to_w32_result=""
++  if test -n "$1"; then
++    oldIFS=$IFS
++    IFS=:
++    for func_convert_core_path_wine_to_w32_f in $1; do
++      IFS=$oldIFS
++      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
++      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
++        if test -z "$func_convert_core_path_wine_to_w32_result"; then
++          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
++        else
++          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
++        fi
++      fi
++    done
++    IFS=$oldIFS
++  fi
++}
++# end: func_convert_core_path_wine_to_w32
++
++
++# func_cygpath ARGS...
++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
++# (2), returns the Cygwin file name or path in func_cygpath_result (input
++# file name or path is assumed to be in w32 format, as previously converted
++# from $build's *nix or MSYS format). In case (3), returns the w32 file name
++# or path in func_cygpath_result (input file name or path is assumed to be in
++# Cygwin format). Returns an empty string on error.
++#
++# ARGS are passed to cygpath, with the last one being the file name or path to
++# be converted.
++#
++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
++# environment variable; do not put it in $PATH.
++func_cygpath ()
++{
++  $opt_debug
++  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
++    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
++    if test "$?" -ne 0; then
++      # on failure, ensure result is empty
++      func_cygpath_result=
++    fi
++  else
++    func_cygpath_result=
++    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
++  fi
++}
++#end: func_cygpath
++
++
++# func_convert_core_msys_to_w32 ARG
++# Convert file name or path ARG from MSYS format to w32 format.  Return
++# result in func_convert_core_msys_to_w32_result.
++func_convert_core_msys_to_w32 ()
++{
++  $opt_debug
++  # awkward: cmd appends spaces to result
++  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
++    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
++}
++#end: func_convert_core_msys_to_w32
++
++
++# func_convert_file_check ARG1 ARG2
++# Verify that ARG1 (a file name in $build format) was converted to $host
++# format in ARG2. Otherwise, emit an error message, but continue (resetting
++# func_to_host_file_result to ARG1).
++func_convert_file_check ()
++{
++  $opt_debug
++  if test -z "$2" && test -n "$1" ; then
++    func_error "Could not determine host file name corresponding to"
++    func_error "  \`$1'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback:
++    func_to_host_file_result="$1"
++  fi
++}
++# end func_convert_file_check
++
++
++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
++# Verify that FROM_PATH (a path in $build format) was converted to $host
++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
++# func_to_host_file_result to a simplistic fallback value (see below).
++func_convert_path_check ()
++{
++  $opt_debug
++  if test -z "$4" && test -n "$3"; then
++    func_error "Could not determine the host path corresponding to"
++    func_error "  \`$3'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback.  This is a deliberately simplistic "conversion" and
++    # should not be "improved".  See libtool.info.
++    if test "x$1" != "x$2"; then
++      lt_replace_pathsep_chars="s|$1|$2|g"
++      func_to_host_path_result=`echo "$3" |
++        $SED -e "$lt_replace_pathsep_chars"`
++    else
++      func_to_host_path_result="$3"
++    fi
++  fi
++}
++# end func_convert_path_check
++
++
++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
++# and appending REPL if ORIG matches BACKPAT.
++func_convert_path_front_back_pathsep ()
++{
++  $opt_debug
++  case $4 in
++  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
++    ;;
++  esac
++  case $4 in
++  $2 ) func_append func_to_host_path_result "$3"
++    ;;
++  esac
++}
++# end func_convert_path_front_back_pathsep
++
++
++##################################################
++# $build to $host FILE NAME CONVERSION FUNCTIONS #
++##################################################
++# invoked via `$to_host_file_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# Result will be available in $func_to_host_file_result.
++
++
++# func_to_host_file ARG
++# Converts the file name ARG from $build format to $host format. Return result
++# in func_to_host_file_result.
++func_to_host_file ()
++{
++  $opt_debug
++  $to_host_file_cmd "$1"
++}
++# end func_to_host_file
++
++
++# func_to_tool_file ARG LAZY
++# converts the file name ARG from $build format to toolchain format. Return
++# result in func_to_tool_file_result.  If the conversion in use is listed
++# in (the comma separated) LAZY, no conversion takes place.
++func_to_tool_file ()
++{
++  $opt_debug
++  case ,$2, in
++    *,"$to_tool_file_cmd",*)
++      func_to_tool_file_result=$1
++      ;;
++    *)
++      $to_tool_file_cmd "$1"
++      func_to_tool_file_result=$func_to_host_file_result
++      ;;
++  esac
++}
++# end func_to_tool_file
++
++
++# func_convert_file_noop ARG
++# Copy ARG to func_to_host_file_result.
++func_convert_file_noop ()
++{
++  func_to_host_file_result="$1"
++}
++# end func_convert_file_noop
++
++
++# func_convert_file_msys_to_w32 ARG
++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_file_result.
++func_convert_file_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_w32
++
++
++# func_convert_file_cygwin_to_w32 ARG
++# Convert file name ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_file_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
++    # LT_CYGPATH in this case.
++    func_to_host_file_result=`cygpath -m "$1"`
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_cygwin_to_w32
++
++
++# func_convert_file_nix_to_w32 ARG
++# Convert file name ARG from *nix to w32 format.  Requires a wine environment
++# and a working winepath. Returns result in func_to_host_file_result.
++func_convert_file_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_file_wine_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_w32
++
++
++# func_convert_file_msys_to_cygwin ARG
++# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_file_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_msys_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_cygwin
++
++
++# func_convert_file_nix_to_cygwin ARG
++# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
++# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
++# in func_to_host_file_result.
++func_convert_file_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
++    func_convert_core_file_wine_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_cygwin
++
++
++#############################################
++# $build to $host PATH CONVERSION FUNCTIONS #
++#############################################
++# invoked via `$to_host_path_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# The result will be available in $func_to_host_path_result.
++#
++# Path separators are also converted from $build format to $host format.  If
++# ARG begins or ends with a path separator character, it is preserved (but
++# converted to $host format) on output.
++#
++# All path conversion functions are named using the following convention:
++#   file name conversion function    : func_convert_file_X_to_Y ()
++#   path conversion function         : func_convert_path_X_to_Y ()
++# where, for any given $build/$host combination the 'X_to_Y' value is the
++# same.  If conversion functions are added for new $build/$host combinations,
++# the two new functions must follow this pattern, or func_init_to_host_path_cmd
++# will break.
++
++
++# func_init_to_host_path_cmd
++# Ensures that function "pointer" variable $to_host_path_cmd is set to the
++# appropriate value, based on the value of $to_host_file_cmd.
++to_host_path_cmd=
++func_init_to_host_path_cmd ()
++{
++  $opt_debug
++  if test -z "$to_host_path_cmd"; then
++    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
++    to_host_path_cmd="func_convert_path_${func_stripname_result}"
++  fi
++}
++
++
++# func_to_host_path ARG
++# Converts the path ARG from $build format to $host format. Return result
++# in func_to_host_path_result.
++func_to_host_path ()
++{
++  $opt_debug
++  func_init_to_host_path_cmd
++  $to_host_path_cmd "$1"
++}
++# end func_to_host_path
++
++
++# func_convert_path_noop ARG
++# Copy ARG to func_to_host_path_result.
++func_convert_path_noop ()
++{
++  func_to_host_path_result="$1"
++}
++# end func_convert_path_noop
++
++
++# func_convert_path_msys_to_w32 ARG
++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_path_result.
++func_convert_path_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from ARG.  MSYS
++    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
++    # and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_msys_to_w32
++
++
++# func_convert_path_cygwin_to_w32 ARG
++# Convert path ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_path_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_cygwin_to_w32
++
++
++# func_convert_path_nix_to_w32 ARG
++# Convert path ARG from *nix to w32 format.  Requires a wine environment and
++# a working winepath.  Returns result in func_to_host_file_result.
++func_convert_path_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_nix_to_w32
++
++
++# func_convert_path_msys_to_cygwin ARG
++# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_path_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_msys_to_cygwin
++
++
++# func_convert_path_nix_to_cygwin ARG
++# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
++# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
++# func_to_host_file_result.
++func_convert_path_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from
++    # ARG. msys behavior is inconsistent here, cygpath turns them
++    # into '.;' and ';.', and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_nix_to_cygwin
++
++
+ # func_mode_compile arg...
+ func_mode_compile ()
+ {
+@@ -1282,12 +1985,12 @@ func_mode_compile ()
+ 	  ;;
+ 
+ 	-pie | -fpie | -fPIE)
+-          pie_flag="$pie_flag $arg"
++          func_append pie_flag " $arg"
+ 	  continue
+ 	  ;;
+ 
+ 	-shared | -static | -prefer-pic | -prefer-non-pic)
+-	  later="$later $arg"
++	  func_append later " $arg"
+ 	  continue
+ 	  ;;
+ 
+@@ -1308,15 +2011,14 @@ func_mode_compile ()
+ 	  save_ifs="$IFS"; IFS=','
+ 	  for arg in $args; do
+ 	    IFS="$save_ifs"
+-	    func_quote_for_eval "$arg"
+-	    lastarg="$lastarg $func_quote_for_eval_result"
++	    func_append_quoted lastarg "$arg"
+ 	  done
+ 	  IFS="$save_ifs"
+ 	  func_stripname ' ' '' "$lastarg"
+ 	  lastarg=$func_stripname_result
+ 
+ 	  # Add the arguments to base_compile.
+-	  base_compile="$base_compile $lastarg"
++	  func_append base_compile " $lastarg"
+ 	  continue
+ 	  ;;
+ 
+@@ -1332,8 +2034,7 @@ func_mode_compile ()
+       esac    #  case $arg_mode
+ 
+       # Aesthetically quote the previous argument.
+-      func_quote_for_eval "$lastarg"
+-      base_compile="$base_compile $func_quote_for_eval_result"
++      func_append_quoted base_compile "$lastarg"
+     done # for arg
+ 
+     case $arg_mode in
+@@ -1358,7 +2059,7 @@ func_mode_compile ()
+     *.[cCFSifmso] | \
+     *.ada | *.adb | *.ads | *.asm | \
+     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+-    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
++    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+       func_xform "$libobj"
+       libobj=$func_xform_result
+       ;;
+@@ -1433,7 +2134,7 @@ func_mode_compile ()
+     # Calculate the filename of the output object if compiler does
+     # not support -o with -c
+     if test "$compiler_c_o" = no; then
+-      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
++      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+       lockfile="$output_obj.lock"
+     else
+       output_obj=
+@@ -1464,17 +2165,16 @@ compiler."
+ 	$opt_dry_run || $RM $removelist
+ 	exit $EXIT_FAILURE
+       fi
+-      removelist="$removelist $output_obj"
++      func_append removelist " $output_obj"
+       $ECHO "$srcfile" > "$lockfile"
+     fi
+ 
+     $opt_dry_run || $RM $removelist
+-    removelist="$removelist $lockfile"
++    func_append removelist " $lockfile"
+     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+ 
+-    if test -n "$fix_srcfile_path"; then
+-      eval srcfile=\"$fix_srcfile_path\"
+-    fi
++    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
++    srcfile=$func_to_tool_file_result
+     func_quote_for_eval "$srcfile"
+     qsrcfile=$func_quote_for_eval_result
+ 
+@@ -1494,7 +2194,7 @@ compiler."
+ 
+       if test -z "$output_obj"; then
+ 	# Place PIC objects in $objdir
+-	command="$command -o $lobj"
++	func_append command " -o $lobj"
+       fi
+ 
+       func_show_eval_locale "$command"	\
+@@ -1541,11 +2241,11 @@ compiler."
+ 	command="$base_compile $qsrcfile $pic_flag"
+       fi
+       if test "$compiler_c_o" = yes; then
+-	command="$command -o $obj"
++	func_append command " -o $obj"
+       fi
+ 
+       # Suppress compiler output if we already did a PIC compilation.
+-      command="$command$suppress_output"
++      func_append command "$suppress_output"
+       func_show_eval_locale "$command" \
+         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+ 
+@@ -1590,13 +2290,13 @@ compiler."
+ }
+ 
+ $opt_help || {
+-test "$mode" = compile && func_mode_compile ${1+"$@"}
++  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ }
+ 
+ func_mode_help ()
+ {
+     # We need to display help for each of the modes.
+-    case $mode in
++    case $opt_mode in
+       "")
+         # Generic help is extracted from the usage comments
+         # at the start of this file.
+@@ -1627,10 +2327,11 @@ This mode accepts the following addition
+ 
+   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+   -no-suppress      do not suppress compiler output for multiple passes
+-  -prefer-pic       try to building PIC objects only
+-  -prefer-non-pic   try to building non-PIC objects only
++  -prefer-pic       try to build PIC objects only
++  -prefer-non-pic   try to build non-PIC objects only
+   -shared           do not build a \`.o' file suitable for static linking
+   -static           only build a \`.o' file suitable for static linking
++  -Wc,FLAG          pass FLAG directly to the compiler
+ 
+ COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+ from the given SOURCEFILE.
+@@ -1683,7 +2384,7 @@ either the \`install' or \`cp' program.
+ 
+ The following components of INSTALL-COMMAND are treated specially:
+ 
+-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
++  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+ 
+ The rest of the components are interpreted as arguments to that command (only
+ BSD-compatible install options are recognized)."
+@@ -1733,6 +2434,11 @@ The following components of LINK-COMMAND
+   -version-info CURRENT[:REVISION[:AGE]]
+                     specify library version info [each variable defaults to 0]
+   -weak LIBNAME     declare that the target provides the LIBNAME interface
++  -Wc,FLAG
++  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
++  -Wl,FLAG
++  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
++  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+ 
+ All other options (arguments beginning with \`-') are ignored.
+ 
+@@ -1766,18 +2472,44 @@ Otherwise, only FILE itself is deleted u
+         ;;
+ 
+       *)
+-        func_fatal_help "invalid operation mode \`$mode'"
++        func_fatal_help "invalid operation mode \`$opt_mode'"
+         ;;
+     esac
+ 
+-    $ECHO
++    echo
+     $ECHO "Try \`$progname --help' for more information about other modes."
+-
+-    exit $?
+ }
+ 
+-  # Now that we've collected a possible --mode arg, show help if necessary
+-  $opt_help && func_mode_help
++# Now that we've collected a possible --mode arg, show help if necessary
++if $opt_help; then
++  if test "$opt_help" = :; then
++    func_mode_help
++  else
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	func_mode_help
++      done
++    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	echo
++	func_mode_help
++      done
++    } |
++    sed '1d
++      /^When reporting/,/^Report/{
++	H
++	d
++      }
++      $x
++      /information about other modes/d
++      /more detailed .*MODE/d
++      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
++  fi
++  exit $?
++fi
+ 
+ 
+ # func_mode_execute arg...
+@@ -1790,13 +2522,16 @@ func_mode_execute ()
+       func_fatal_help "you must specify a COMMAND"
+ 
+     # Handle -dlopen flags immediately.
+-    for file in $execute_dlfiles; do
++    for file in $opt_dlopen; do
+       test -f "$file" \
+ 	|| func_fatal_help "\`$file' is not a file"
+ 
+       dir=
+       case $file in
+       *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
+ 	# Check to see that this really is a libtool archive.
+ 	func_lalib_unsafe_p "$file" \
+ 	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+@@ -1818,7 +2553,7 @@ func_mode_execute ()
+ 	dir="$func_dirname_result"
+ 
+ 	if test -f "$dir/$objdir/$dlname"; then
+-	  dir="$dir/$objdir"
++	  func_append dir "/$objdir"
+ 	else
+ 	  if test ! -f "$dir/$dlname"; then
+ 	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+@@ -1859,7 +2594,7 @@ func_mode_execute ()
+     for file
+     do
+       case $file in
+-      -*) ;;
++      -* | *.la | *.lo ) ;;
+       *)
+ 	# Do a test to see if this is really a libtool program.
+ 	if func_ltwrapper_script_p "$file"; then
+@@ -1875,8 +2610,7 @@ func_mode_execute ()
+ 	;;
+       esac
+       # Quote arguments (to preserve shell metacharacters).
+-      func_quote_for_eval "$file"
+-      args="$args $func_quote_for_eval_result"
++      func_append_quoted args "$file"
+     done
+ 
+     if test "X$opt_dry_run" = Xfalse; then
+@@ -1901,29 +2635,66 @@ func_mode_execute ()
+       # Display what would be done.
+       if test -n "$shlibpath_var"; then
+ 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+-	$ECHO "export $shlibpath_var"
++	echo "export $shlibpath_var"
+       fi
+       $ECHO "$cmd$args"
+       exit $EXIT_SUCCESS
+     fi
+ }
+ 
+-test "$mode" = execute && func_mode_execute ${1+"$@"}
++test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
++
+ 
++# func_mode_finish arg...
++func_mode_finish ()
++{
++    $opt_debug
++    libs=
++    libdirs=
++    admincmds=
++
++    for opt in "$nonopt" ${1+"$@"}
++    do
++      if test -d "$opt"; then
++	func_append libdirs " $opt"
++
++      elif test -f "$opt"; then
++	if func_lalib_unsafe_p "$opt"; then
++	  func_append libs " $opt"
++	else
++	  func_warning "\`$opt' is not a valid libtool archive"
++	fi
++
++      else
++	func_fatal_error "invalid argument \`$opt'"
++      fi
++    done
++
++    if test -n "$libs"; then
++      if test -n "$lt_sysroot"; then
++        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
++        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
++      else
++        sysroot_cmd=
++      fi
+ 
+-# func_mode_finish arg...
+-func_mode_finish ()
+-{
+-    $opt_debug
+-    libdirs="$nonopt"
+-    admincmds=
++      # Remove sysroot references
++      if $opt_dry_run; then
++        for lib in $libs; do
++          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
++        done
++      else
++        tmpdir=`func_mktempdir`
++        for lib in $libs; do
++	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
++	    > $tmpdir/tmp-la
++	  mv -f $tmpdir/tmp-la $lib
++	done
++        ${RM}r "$tmpdir"
++      fi
++    fi
+ 
+     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+-      for dir
+-      do
+-	libdirs="$libdirs $dir"
+-      done
+-
+       for libdir in $libdirs; do
+ 	if test -n "$finish_cmds"; then
+ 	  # Do each command in the finish commands.
+@@ -1933,7 +2704,7 @@ func_mode_finish ()
+ 	if test -n "$finish_eval"; then
+ 	  # Do the single finish_eval.
+ 	  eval cmds=\"$finish_eval\"
+-	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
++	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+        $cmds"
+ 	fi
+       done
+@@ -1942,53 +2713,55 @@ func_mode_finish ()
+     # Exit here if they wanted silent mode.
+     $opt_silent && exit $EXIT_SUCCESS
+ 
+-    $ECHO "X----------------------------------------------------------------------" | $Xsed
+-    $ECHO "Libraries have been installed in:"
+-    for libdir in $libdirs; do
+-      $ECHO "   $libdir"
+-    done
+-    $ECHO
+-    $ECHO "If you ever happen to want to link against installed libraries"
+-    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+-    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+-    $ECHO "flag during linking and do at least one of the following:"
+-    if test -n "$shlibpath_var"; then
+-      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+-      $ECHO "     during execution"
+-    fi
+-    if test -n "$runpath_var"; then
+-      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+-      $ECHO "     during linking"
+-    fi
+-    if test -n "$hardcode_libdir_flag_spec"; then
+-      libdir=LIBDIR
+-      eval flag=\"$hardcode_libdir_flag_spec\"
++    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++      echo "----------------------------------------------------------------------"
++      echo "Libraries have been installed in:"
++      for libdir in $libdirs; do
++	$ECHO "   $libdir"
++      done
++      echo
++      echo "If you ever happen to want to link against installed libraries"
++      echo "in a given directory, LIBDIR, you must either use libtool, and"
++      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++      echo "flag during linking and do at least one of the following:"
++      if test -n "$shlibpath_var"; then
++	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
++	echo "     during execution"
++      fi
++      if test -n "$runpath_var"; then
++	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
++	echo "     during linking"
++      fi
++      if test -n "$hardcode_libdir_flag_spec"; then
++	libdir=LIBDIR
++	eval flag=\"$hardcode_libdir_flag_spec\"
+ 
+-      $ECHO "   - use the \`$flag' linker flag"
+-    fi
+-    if test -n "$admincmds"; then
+-      $ECHO "   - have your system administrator run these commands:$admincmds"
+-    fi
+-    if test -f /etc/ld.so.conf; then
+-      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+-    fi
+-    $ECHO
++	$ECHO "   - use the \`$flag' linker flag"
++      fi
++      if test -n "$admincmds"; then
++	$ECHO "   - have your system administrator run these commands:$admincmds"
++      fi
++      if test -f /etc/ld.so.conf; then
++	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++      fi
++      echo
+ 
+-    $ECHO "See any operating system documentation about shared libraries for"
+-    case $host in
+-      solaris2.[6789]|solaris2.1[0-9])
+-        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+-	$ECHO "pages."
+-	;;
+-      *)
+-        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+-        ;;
+-    esac
+-    $ECHO "X----------------------------------------------------------------------" | $Xsed
++      echo "See any operating system documentation about shared libraries for"
++      case $host in
++	solaris2.[6789]|solaris2.1[0-9])
++	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
++	  echo "pages."
++	  ;;
++	*)
++	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
++	  ;;
++      esac
++      echo "----------------------------------------------------------------------"
++    fi
+     exit $EXIT_SUCCESS
+ }
+ 
+-test "$mode" = finish && func_mode_finish ${1+"$@"}
++test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+ 
+ 
+ # func_mode_install arg...
+@@ -1999,7 +2772,7 @@ func_mode_install ()
+     # install_prog (especially on Windows NT).
+     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+        # Allow the use of GNU shtool's install command.
+-       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
++       case $nonopt in *shtool*) :;; *) false;; esac; then
+       # Aesthetically quote it.
+       func_quote_for_eval "$nonopt"
+       install_prog="$func_quote_for_eval_result "
+@@ -2013,7 +2786,12 @@ func_mode_install ()
+     # The real first argument should be the name of the installation program.
+     # Aesthetically quote it.
+     func_quote_for_eval "$arg"
+-    install_prog="$install_prog$func_quote_for_eval_result"
++    func_append install_prog "$func_quote_for_eval_result"
++    install_shared_prog=$install_prog
++    case " $install_prog " in
++      *[\\\ /]cp\ *) install_cp=: ;;
++      *) install_cp=false ;;
++    esac
+ 
+     # We need to accept at least all the BSD install flags.
+     dest=
+@@ -2023,10 +2801,12 @@ func_mode_install ()
+     install_type=
+     isdir=no
+     stripme=
++    no_mode=:
+     for arg
+     do
++      arg2=
+       if test -n "$dest"; then
+-	files="$files $dest"
++	func_append files " $dest"
+ 	dest=$arg
+ 	continue
+       fi
+@@ -2034,10 +2814,9 @@ func_mode_install ()
+       case $arg in
+       -d) isdir=yes ;;
+       -f)
+-	case " $install_prog " in
+-	*[\\\ /]cp\ *) ;;
+-	*) prev=$arg ;;
+-	esac
++	if $install_cp; then :; else
++	  prev=$arg
++	fi
+ 	;;
+       -g | -m | -o)
+ 	prev=$arg
+@@ -2051,6 +2830,10 @@ func_mode_install ()
+       *)
+ 	# If the previous option needed an argument, then skip it.
+ 	if test -n "$prev"; then
++	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
++	    arg2=$install_override_mode
++	    no_mode=false
++	  fi
+ 	  prev=
+ 	else
+ 	  dest=$arg
+@@ -2061,7 +2844,11 @@ func_mode_install ()
+ 
+       # Aesthetically quote the argument.
+       func_quote_for_eval "$arg"
+-      install_prog="$install_prog $func_quote_for_eval_result"
++      func_append install_prog " $func_quote_for_eval_result"
++      if test -n "$arg2"; then
++	func_quote_for_eval "$arg2"
++      fi
++      func_append install_shared_prog " $func_quote_for_eval_result"
+     done
+ 
+     test -z "$install_prog" && \
+@@ -2070,6 +2857,13 @@ func_mode_install ()
+     test -n "$prev" && \
+       func_fatal_help "the \`$prev' option requires an argument"
+ 
++    if test -n "$install_override_mode" && $no_mode; then
++      if $install_cp; then :; else
++	func_quote_for_eval "$install_override_mode"
++	func_append install_shared_prog " -m $func_quote_for_eval_result"
++      fi
++    fi
++
+     if test -z "$files"; then
+       if test -z "$dest"; then
+ 	func_fatal_help "no file or destination specified"
+@@ -2124,10 +2918,13 @@ func_mode_install ()
+       case $file in
+       *.$libext)
+ 	# Do the static libraries later.
+-	staticlibs="$staticlibs $file"
++	func_append staticlibs " $file"
+ 	;;
+ 
+       *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
+ 	# Check to see that this really is a libtool archive.
+ 	func_lalib_unsafe_p "$file" \
+ 	  || func_fatal_help "\`$file' is not a valid libtool archive"
+@@ -2141,23 +2938,30 @@ func_mode_install ()
+ 	if test "X$destdir" = "X$libdir"; then
+ 	  case "$current_libdirs " in
+ 	  *" $libdir "*) ;;
+-	  *) current_libdirs="$current_libdirs $libdir" ;;
++	  *) func_append current_libdirs " $libdir" ;;
+ 	  esac
+ 	else
+ 	  # Note the libdir as a future libdir.
+ 	  case "$future_libdirs " in
+ 	  *" $libdir "*) ;;
+-	  *) future_libdirs="$future_libdirs $libdir" ;;
++	  *) func_append future_libdirs " $libdir" ;;
+ 	  esac
+ 	fi
+ 
+ 	func_dirname "$file" "/" ""
+ 	dir="$func_dirname_result"
+-	dir="$dir$objdir"
++	func_append dir "$objdir"
+ 
+ 	if test -n "$relink_command"; then
++      # Strip any trailing slash from the destination.
++      func_stripname '' '/' "$libdir"
++      destlibdir=$func_stripname_result
++
++      func_stripname '' '/' "$destdir"
++      s_destdir=$func_stripname_result
++
+ 	  # Determine the prefix the user has applied to our future dir.
+-	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
++	  inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
+ 
+ 	  # Don't allow the user to place us outside of our expected
+ 	  # location b/c this prevents finding dependent libraries that
+@@ -2170,9 +2974,9 @@ func_mode_install ()
+ 
+ 	  if test -n "$inst_prefix_dir"; then
+ 	    # Stick the inst_prefix_dir data into the link command.
+-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ 	  else
+-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ 	  fi
+ 
+ 	  func_warning "relinking \`$file'"
+@@ -2190,7 +2994,7 @@ func_mode_install ()
+ 	  test -n "$relink_command" && srcname="$realname"T
+ 
+ 	  # Install the shared library and build the symlinks.
+-	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
++	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 	      'exit $?'
+ 	  tstripme="$stripme"
+ 	  case $host_os in
+@@ -2230,7 +3034,7 @@ func_mode_install ()
+ 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+ 
+ 	# Maybe install the static library, too.
+-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
++	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ 	;;
+ 
+       *.lo)
+@@ -2330,7 +3134,7 @@ func_mode_install ()
+ 	    if test -f "$lib"; then
+ 	      func_source "$lib"
+ 	    fi
+-	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
++	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ 	    if test -n "$libdir" && test ! -f "$libfile"; then
+ 	      func_warning "\`$lib' has not been installed in \`$libdir'"
+ 	      finalize=no
+@@ -2349,7 +3153,7 @@ func_mode_install ()
+ 		file="$func_basename_result"
+ 	        outputname="$tmpdir/$file"
+ 	        # Replace the output file specification.
+-	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
++	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+ 
+ 	        $opt_silent || {
+ 	          func_quote_for_expand "$relink_command"
+@@ -2368,7 +3172,7 @@ func_mode_install ()
+ 	    }
+ 	  else
+ 	    # Install the binary that we compiled earlier.
+-	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
++	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ 	  fi
+ 	fi
+ 
+@@ -2427,7 +3231,7 @@ func_mode_install ()
+     fi
+ }
+ 
+-test "$mode" = install && func_mode_install ${1+"$@"}
++test "$opt_mode" = install && func_mode_install ${1+"$@"}
+ 
+ 
+ # func_generate_dlsyms outputname originator pic_p
+@@ -2470,6 +3274,22 @@ func_generate_dlsyms ()
+ extern \"C\" {
+ #endif
+ 
++#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
++#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
++#endif
++
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++   relocations are performed -- see ld's documentation on pseudo-relocs.  */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data.  */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
++
+ /* External symbol declarations for the compiler. */\
+ "
+ 
+@@ -2479,10 +3299,11 @@ extern \"C\" {
+ 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+ 
+ 	  # Add our own program objects to the symbol list.
+-	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ 	  for progfile in $progfiles; do
+-	    func_verbose "extracting global C symbols from \`$progfile'"
+-	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
++	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
++	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
++	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ 	  done
+ 
+ 	  if test -n "$exclude_expsyms"; then
+@@ -2518,7 +3339,7 @@ extern \"C\" {
+ 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ 	      eval '$MV "$nlist"T "$nlist"'
+ 	      case $host in
+-	        *cygwin | *mingw* | *cegcc* )
++	        *cygwin* | *mingw* | *cegcc* )
+ 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ 	          ;;
+@@ -2531,10 +3352,52 @@ extern \"C\" {
+ 	  func_verbose "extracting global C symbols from \`$dlprefile'"
+ 	  func_basename "$dlprefile"
+ 	  name="$func_basename_result"
+-	  $opt_dry_run || {
+-	    eval '$ECHO ": $name " >> "$nlist"'
+-	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+-	  }
++          case $host in
++	    *cygwin* | *mingw* | *cegcc* )
++	      # if an import library, we need to obtain dlname
++	      if func_win32_import_lib_p "$dlprefile"; then
++	        func_tr_sh "$dlprefile"
++	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
++	        dlprefile_dlbasename=""
++	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
++	          # Use subshell, to avoid clobbering current variable values
++	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
++	          if test -n "$dlprefile_dlname" ; then
++	            func_basename "$dlprefile_dlname"
++	            dlprefile_dlbasename="$func_basename_result"
++	          else
++	            # no lafile. user explicitly requested -dlpreopen <import library>.
++	            $sharedlib_from_linklib_cmd "$dlprefile"
++	            dlprefile_dlbasename=$sharedlib_from_linklib_result
++	          fi
++	        fi
++	        $opt_dry_run || {
++	          if test -n "$dlprefile_dlbasename" ; then
++	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
++	          else
++	            func_warning "Could not compute DLL name from $name"
++	            eval '$ECHO ": $name " >> "$nlist"'
++	          fi
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
++	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
++	        }
++	      else # not an import lib
++	        $opt_dry_run || {
++	          eval '$ECHO ": $name " >> "$nlist"'
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	        }
++	      fi
++	    ;;
++	    *)
++	      $opt_dry_run || {
++	        eval '$ECHO ": $name " >> "$nlist"'
++	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	      }
++	    ;;
++          esac
+ 	done
+ 
+ 	$opt_dry_run || {
+@@ -2562,36 +3425,19 @@ extern \"C\" {
+ 	  if test -f "$nlist"S; then
+ 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ 	  else
+-	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
++	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ 	  fi
+ 
+-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
++	  echo >> "$output_objdir/$my_dlsyms" "\
+ 
+ /* The mapping between symbol names and symbols.  */
+ typedef struct {
+   const char *name;
+   void *address;
+ } lt_dlsymlist;
+-"
+-	  case $host in
+-	  *cygwin* | *mingw* | *cegcc* )
+-	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+-/* DATA imports from DLLs on WIN32 con't be const, because
+-   runtime relocations are performed -- see ld's documentation
+-   on pseudo-relocs.  */"
+-	    lt_dlsym_const= ;;
+-	  *osf5*)
+-	    echo >> "$output_objdir/$my_dlsyms" "\
+-/* This system does not cope well with relocations in const data */"
+-	    lt_dlsym_const= ;;
+-	  *)
+-	    lt_dlsym_const=const ;;
+-	  esac
+-
+-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+-extern $lt_dlsym_const lt_dlsymlist
++extern LT_DLSYM_CONST lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[];
+-$lt_dlsym_const lt_dlsymlist
++LT_DLSYM_CONST lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[] =
+ {\
+   { \"$my_originator\", (void *) 0 },"
+@@ -2604,7 +3450,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[]
+ 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ 	    ;;
+ 	  esac
+-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
++	  echo >> "$output_objdir/$my_dlsyms" "\
+   {0, (void *) 0}
+ };
+ 
+@@ -2647,7 +3493,7 @@ static const void *lt_preloaded_setup()
+ 	for arg in $LTCFLAGS; do
+ 	  case $arg in
+ 	  -pie | -fpie | -fPIE) ;;
+-	  *) symtab_cflags="$symtab_cflags $arg" ;;
++	  *) func_append symtab_cflags " $arg" ;;
+ 	  esac
+ 	done
+ 
+@@ -2662,16 +3508,16 @@ static const void *lt_preloaded_setup()
+ 	case $host in
+ 	*cygwin* | *mingw* | *cegcc* )
+ 	  if test -f "$output_objdir/$my_outputname.def"; then
+-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ 	  else
+-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ 	  fi
+ 	  ;;
+ 	*)
+-	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+-	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
++	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ 	  ;;
+ 	esac
+ 	;;
+@@ -2685,8 +3531,8 @@ static const void *lt_preloaded_setup()
+       # really was required.
+ 
+       # Nullify the symbol file.
+-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
++      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
++      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+     fi
+ }
+ 
+@@ -2696,6 +3542,7 @@ static const void *lt_preloaded_setup()
+ # Need a lot of goo to handle *both* DLLs and import libs
+ # Has to be a shell function in order to 'eat' the argument
+ # that is supplied when $file_magic_command is called.
++# Despite the name, also deal with 64 bit binaries.
+ func_win32_libid ()
+ {
+   $opt_debug
+@@ -2706,9 +3553,11 @@ func_win32_libid ()
+     win32_libid_type="x86 archive import"
+     ;;
+   *ar\ archive*) # could be an import, or static
++    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+-      win32_nmres=`eval $NM -f posix -A $1 |
++       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
++      func_to_tool_file "$1" func_convert_file_msys_to_w32
++      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ 	$SED -n -e '
+ 	    1,100{
+ 		/ I /{
+@@ -2737,6 +3586,131 @@ func_win32_libid ()
+   $ECHO "$win32_libid_type"
+ }
+ 
++# func_cygming_dll_for_implib ARG
++#
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib ()
++{
++  $opt_debug
++  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
++}
++
++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
++#
++# The is the core of a fallback implementation of a
++# platform-specific function to extract the name of the
++# DLL associated with the specified import library LIBNAME.
++#
++# SECTION_NAME is either .idata$6 or .idata$7, depending
++# on the platform and compiler that created the implib.
++#
++# Echos the name of the DLL associated with the
++# specified import library.
++func_cygming_dll_for_implib_fallback_core ()
++{
++  $opt_debug
++  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
++  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
++    $SED '/^Contents of section '"$match_literal"':/{
++      # Place marker at beginning of archive member dllname section
++      s/.*/====MARK====/
++      p
++      d
++    }
++    # These lines can sometimes be longer than 43 characters, but
++    # are always uninteresting
++    /:[	 ]*file format pe[i]\{,1\}-/d
++    /^In archive [^:]*:/d
++    # Ensure marker is printed
++    /^====MARK====/p
++    # Remove all lines with less than 43 characters
++    /^.\{43\}/!d
++    # From remaining lines, remove first 43 characters
++    s/^.\{43\}//' |
++    $SED -n '
++      # Join marker and all lines until next marker into a single line
++      /^====MARK====/ b para
++      H
++      $ b para
++      b
++      :para
++      x
++      s/\n//g
++      # Remove the marker
++      s/^====MARK====//
++      # Remove trailing dots and whitespace
++      s/[\. \t]*$//
++      # Print
++      /./p' |
++    # we now have a list, one entry per line, of the stringified
++    # contents of the appropriate section of all members of the
++    # archive which possess that section. Heuristic: eliminate
++    # all those which have a first or second character that is
++    # a '.' (that is, objdump's representation of an unprintable
++    # character.) This should work for all archives with less than
++    # 0x302f exports -- but will fail for DLLs whose name actually
++    # begins with a literal '.' or a single character followed by
++    # a '.'.
++    #
++    # Of those that remain, print the first one.
++    $SED -e '/^\./d;/^.\./d;q'
++}
++
++# func_cygming_gnu_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is a GNU/binutils-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_gnu_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
++  test -n "$func_cygming_gnu_implib_tmp"
++}
++
++# func_cygming_ms_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is an MS-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_ms_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
++  test -n "$func_cygming_ms_implib_tmp"
++}
++
++# func_cygming_dll_for_implib_fallback ARG
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++#
++# This fallback implementation is for use when $DLLTOOL
++# does not support the --identify-strict option.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib_fallback ()
++{
++  $opt_debug
++  if func_cygming_gnu_implib_p "$1" ; then
++    # binutils import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
++  elif func_cygming_ms_implib_p "$1" ; then
++    # ms-generated import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
++  else
++    # unknown
++    sharedlib_from_linklib_result=""
++  fi
++}
+ 
+ 
+ # func_extract_an_archive dir oldlib
+@@ -2745,7 +3719,18 @@ func_extract_an_archive ()
+     $opt_debug
+     f_ex_an_ar_dir="$1"; shift
+     f_ex_an_ar_oldlib="$1"
+-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
++    if test "$lock_old_archive_extraction" = yes; then
++      lockfile=$f_ex_an_ar_oldlib.lock
++      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++	func_echo "Waiting for $lockfile to be removed"
++	sleep 2
++      done
++    fi
++    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
++		   'stat=$?; rm -f "$lockfile"; exit $stat'
++    if test "$lock_old_archive_extraction" = yes; then
++      $opt_dry_run || rm -f "$lockfile"
++    fi
+     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+      :
+     else
+@@ -2816,7 +3801,7 @@ func_extract_archives ()
+ 	    darwin_file=
+ 	    darwin_files=
+ 	    for darwin_file in $darwin_filelist; do
+-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
++	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ 	      $LIPO -create -output "$darwin_file" $darwin_files
+ 	    done # $darwin_filelist
+ 	    $RM -rf unfat-$$
+@@ -2831,25 +3816,30 @@ func_extract_archives ()
+         func_extract_an_archive "$my_xdir" "$my_xabs"
+ 	;;
+       esac
+-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
++      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+     done
+ 
+     func_extract_archives_result="$my_oldobjs"
+ }
+ 
+ 
+-
+-# func_emit_wrapper_part1 [arg=no]
++# func_emit_wrapper [arg=no]
+ #
+-# Emit the first part of a libtool wrapper script on stdout.
+-# For more information, see the description associated with
+-# func_emit_wrapper(), below.
+-func_emit_wrapper_part1 ()
+-{
+-	func_emit_wrapper_part1_arg1=no
+-	if test -n "$1" ; then
+-	  func_emit_wrapper_part1_arg1=$1
+-	fi
++# Emit a libtool wrapper script on stdout.
++# Don't directly open a file because we may want to
++# incorporate the script contents within a cygwin/mingw
++# wrapper executable.  Must ONLY be called from within
++# func_mode_link because it depends on a number of variables
++# set therein.
++#
++# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
++# variable will take.  If 'yes', then the emitted script
++# will assume that the directory in which it is stored is
++# the $objdir directory.  This is a cygwin/mingw-specific
++# behavior.
++func_emit_wrapper ()
++{
++	func_emit_wrapper_arg1=${1-no}
+ 
+ 	$ECHO "\
+ #! $SHELL
+@@ -2865,7 +3855,6 @@ func_emit_wrapper_part1 ()
+ 
+ # Sed substitution that helps us do robust quoting.  It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='${SED} -e 1s/^X//'
+ sed_quote_subst='$sed_quote_subst'
+ 
+ # Be Bourne compatible
+@@ -2896,31 +3885,132 @@ if test \"\$libtool_install_magic\" = \"
+ else
+   # When we are sourced in execute mode, \$file and \$ECHO are already set.
+   if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-    ECHO=\"$qecho\"
+-    file=\"\$0\"
+-    # Make sure echo works.
+-    if test \"X\$1\" = X--no-reexec; then
+-      # Discard the --no-reexec flag, and continue.
+-      shift
+-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+-      # Yippee, \$ECHO works!
+-      :
+-    else
+-      # Restart under the correct shell, and then maybe \$ECHO will work.
+-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+-    fi
+-  fi\
++    file=\"\$0\""
++
++    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
++    $ECHO "\
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++\$1
++_LTECHO_EOF'
++}
++    ECHO=\"$qECHO\"
++  fi
++
++# Very basic option parsing. These options are (a) specific to
++# the libtool wrapper, (b) are identical between the wrapper
++# /script/ and the wrapper /executable/ which is used only on
++# windows platforms, and (c) all begin with the string "--lt-"
++# (application programs are unlikely to have options which match
++# this pattern).
++#
++# There are only two supported options: --lt-debug and
++# --lt-dump-script. There is, deliberately, no --lt-help.
++#
++# The first argument to this parsing function should be the
++# script's $0 value, followed by "$@".
++lt_option_debug=
++func_parse_lt_options ()
++{
++  lt_script_arg0=\$0
++  shift
++  for lt_opt
++  do
++    case \"\$lt_opt\" in
++    --lt-debug) lt_option_debug=1 ;;
++    --lt-dump-script)
++        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
++        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
++        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
++        cat \"\$lt_dump_D/\$lt_dump_F\"
++        exit 0
++      ;;
++    --lt-*)
++        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
++        exit 1
++      ;;
++    esac
++  done
++
++  # Print the debug banner immediately:
++  if test -n \"\$lt_option_debug\"; then
++    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
++  fi
++}
++
++# Used when --lt-debug. Prints its arguments to stdout
++# (redirection is the responsibility of the caller)
++func_lt_dump_args ()
++{
++  lt_dump_args_N=1;
++  for lt_arg
++  do
++    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
++    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
++  done
++}
++
++# Core function for launching the target application
++func_exec_program_core ()
++{
+ "
+-	$ECHO "\
++  case $host in
++  # Backslashes separate directories on plain windows
++  *-*-mingw | *-*-os2* | *-cegcc*)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
++"
++    ;;
++
++  *)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir/\$program\" \${1+\"\$@\"}
++"
++    ;;
++  esac
++  $ECHO "\
++      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
++      exit 1
++}
++
++# A function to encapsulate launching the target application
++# Strips options in the --lt-* namespace from \$@ and
++# launches target application with the remaining arguments.
++func_exec_program ()
++{
++  for lt_wr_arg
++  do
++    case \$lt_wr_arg in
++    --lt-*) ;;
++    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
++    esac
++    shift
++  done
++  func_exec_program_core \${1+\"\$@\"}
++}
++
++  # Parse options
++  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+ 
+   # Find the directory that this script lives in.
+-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
++  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+ 
+   # Follow symbolic links until we get to the real thisdir.
+-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
++  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+   while test -n \"\$file\"; do
+-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
++    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+ 
+     # If there was a directory component, then change thisdir.
+     if test \"x\$destdir\" != \"x\$file\"; then
+@@ -2930,30 +4020,13 @@ else
+       esac
+     fi
+ 
+-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
++    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
++    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+   done
+-"
+-}
+-# end: func_emit_wrapper_part1
+-
+-# func_emit_wrapper_part2 [arg=no]
+-#
+-# Emit the second part of a libtool wrapper script on stdout.
+-# For more information, see the description associated with
+-# func_emit_wrapper(), below.
+-func_emit_wrapper_part2 ()
+-{
+-	func_emit_wrapper_part2_arg1=no
+-	if test -n "$1" ; then
+-	  func_emit_wrapper_part2_arg1=$1
+-	fi
+-
+-	$ECHO "\
+ 
+   # Usually 'no', except on cygwin/mingw when embedded into
+   # the cwrapper.
+-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
++  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+     # special case for '.'
+     if test \"\$thisdir\" = \".\"; then
+@@ -2961,7 +4034,7 @@ func_emit_wrapper_part2 ()
+     fi
+     # remove .libs from thisdir
+     case \"\$thisdir\" in
+-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
++    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+     $objdir )   thisdir=. ;;
+     esac
+   fi
+@@ -3016,6 +4089,18 @@ func_emit_wrapper_part2 ()
+ 
+   if test -f \"\$progdir/\$program\"; then"
+ 
++	# fixup the dll searchpath if we need to.
++	#
++	# Fix the DLL searchpath if we need to.  Do this before prepending
++	# to shlibpath, because on Windows, both are PATH and uninstalled
++	# libraries must come first.
++	if test -n "$dllsearchpath"; then
++	  $ECHO "\
++    # Add the dll search path components to the executable PATH
++    PATH=$dllsearchpath:\$PATH
++"
++	fi
++
+ 	# Export our shlibpath_var if we have one.
+ 	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ 	  $ECHO "\
+@@ -3024,253 +4109,28 @@ func_emit_wrapper_part2 ()
+ 
+     # Some systems cannot cope with colon-terminated $shlibpath_var
+     # The second colon is a workaround for a bug in BeOS R4 sed
+-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
++    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+ 
+     export $shlibpath_var
+ "
+ 	fi
+ 
+-	# fixup the dll searchpath if we need to.
+-	if test -n "$dllsearchpath"; then
+-	  $ECHO "\
+-    # Add the dll search path components to the executable PATH
+-    PATH=$dllsearchpath:\$PATH
+-"
+-	fi
+-
+ 	$ECHO "\
+     if test \"\$libtool_execute_magic\" != \"$magic\"; then
+       # Run the actual program with our arguments.
+-"
+-	case $host in
+-	# Backslashes separate directories on plain windows
+-	*-*-mingw | *-*-os2* | *-cegcc*)
+-	  $ECHO "\
+-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+-"
+-	  ;;
+-
+-	*)
+-	  $ECHO "\
+-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+-"
+-	  ;;
+-	esac
+-	$ECHO "\
+-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+-      exit 1
++      func_exec_program \${1+\"\$@\"}
+     fi
+   else
+     # The program doesn't exist.
+-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+-    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+-    exit 1
+-  fi
+-fi\
+-"
+-}
+-# end: func_emit_wrapper_part2
+-
+-
+-# func_emit_wrapper [arg=no]
+-#
+-# Emit a libtool wrapper script on stdout.
+-# Don't directly open a file because we may want to
+-# incorporate the script contents within a cygwin/mingw
+-# wrapper executable.  Must ONLY be called from within
+-# func_mode_link because it depends on a number of variables
+-# set therein.
+-#
+-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+-# variable will take.  If 'yes', then the emitted script
+-# will assume that the directory in which it is stored is
+-# the $objdir directory.  This is a cygwin/mingw-specific
+-# behavior.
+-func_emit_wrapper ()
+-{
+-	func_emit_wrapper_arg1=no
+-	if test -n "$1" ; then
+-	  func_emit_wrapper_arg1=$1
+-	fi
+-
+-	# split this up so that func_emit_cwrapperexe_src
+-	# can call each part independently.
+-	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+-	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+-}
+-
+-
+-# func_to_host_path arg
+-#
+-# Convert paths to host format when used with build tools.
+-# Intended for use with "native" mingw (where libtool itself
+-# is running under the msys shell), or in the following cross-
+-# build environments:
+-#    $build          $host
+-#    mingw (msys)    mingw  [e.g. native]
+-#    cygwin          mingw
+-#    *nix + wine     mingw
+-# where wine is equipped with the `winepath' executable.
+-# In the native mingw case, the (msys) shell automatically
+-# converts paths for any non-msys applications it launches,
+-# but that facility isn't available from inside the cwrapper.
+-# Similar accommodations are necessary for $host mingw and
+-# $build cygwin.  Calling this function does no harm for other
+-# $host/$build combinations not listed above.
+-#
+-# ARG is the path (on $build) that should be converted to
+-# the proper representation for $host. The result is stored
+-# in $func_to_host_path_result.
+-func_to_host_path ()
+-{
+-  func_to_host_path_result="$1"
+-  if test -n "$1" ; then
+-    case $host in
+-      *mingw* )
+-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+-        case $build in
+-          *mingw* ) # actually, msys
+-            # awkward: cmd appends spaces to result
+-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+-            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+-              $SED -e "$lt_sed_naive_backslashify"`
+-            ;;
+-          *cygwin* )
+-            func_to_host_path_tmp1=`cygpath -w "$1"`
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

recipes/binutils/binutils_2.20.1.bb +2 -2
index d87ea9f..5154e2d 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.7.1

Part of the diff is not shown here. View the raw message.

author
#2 lore raw
Quoted 4 lines · Henning Heinold

Hi,

hm why is binutils not copy over this file?

because we dont autoreconf it. I tried to autoreconf it but it needs autoconf 2.65 then I overrode it
but resulting configure would not run. So we have to do manually once what autoreconf should have done
after .m4 upgrades.

Quoted 7 lines

Bye Henning

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel