Skip to contentSkip to conversation

ARM: pxa: Introduce pxa[23]xx_map_io

PATCH Superseded Marek Vasut 3 participants 21 messages Oct 9, 2010 – Oct 10, 2010

Subsystems (7)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/13 ARM: pxa: Introduce pxa[23]xx_map_io

This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA2xx and PXA3xx memory mapping.

Also, fixup for platforms broken after introducing pxa2xx_map_io() and pxa3xx_map_io() is included.

---
 arch/arm/mach-pxa/balloon3.c       |    2 +-
 arch/arm/mach-pxa/capc7117.c       |    2 +-
 arch/arm/mach-pxa/cm-x2xx.c        |    4 +-
 arch/arm/mach-pxa/cm-x300.c        |    2 +-
 arch/arm/mach-pxa/colibri-pxa270.c |    4 +-
 arch/arm/mach-pxa/colibri-pxa300.c |    2 +-
 arch/arm/mach-pxa/colibri-pxa320.c |    2 +-
 arch/arm/mach-pxa/corgi.c          |    6 ++--
 arch/arm/mach-pxa/csb726.c         |    2 +-
 arch/arm/mach-pxa/em-x270.c        |    4 +-
 arch/arm/mach-pxa/eseries.c        |   12 +++++-----
 arch/arm/mach-pxa/ezx.c            |   12 +++++-----
 arch/arm/mach-pxa/generic.c        |   37 ++++++++++++++++++++++++++++-------
 arch/arm/mach-pxa/generic.h        |    3 +-
 arch/arm/mach-pxa/gumstix.c        |    2 +-
 arch/arm/mach-pxa/h5000.c          |    2 +-
 arch/arm/mach-pxa/himalaya.c       |    2 +-
 arch/arm/mach-pxa/hx4700.c         |    2 +-
 arch/arm/mach-pxa/icontrol.c       |    2 +-
 arch/arm/mach-pxa/idp.c            |    2 +-
 arch/arm/mach-pxa/littleton.c      |    2 +-
 arch/arm/mach-pxa/lpd270.c         |    2 +-
 arch/arm/mach-pxa/lubbock.c        |    2 +-
 arch/arm/mach-pxa/magician.c       |    2 +-
 arch/arm/mach-pxa/mainstone.c      |    2 +-
 arch/arm/mach-pxa/mioa701.c        |    2 +-
 arch/arm/mach-pxa/mp900.c          |    2 +-
 arch/arm/mach-pxa/palmld.c         |    2 +-
 arch/arm/mach-pxa/palmt5.c         |    2 +-
 arch/arm/mach-pxa/palmtc.c         |    2 +-
 arch/arm/mach-pxa/palmte2.c        |    2 +-
 arch/arm/mach-pxa/palmtreo.c       |    4 +-
 arch/arm/mach-pxa/palmtx.c         |    2 +-
 arch/arm/mach-pxa/palmz72.c        |    2 +-
 arch/arm/mach-pxa/pcm027.c         |    2 +-
 arch/arm/mach-pxa/poodle.c         |    2 +-
 arch/arm/mach-pxa/raumfeld.c       |    6 ++--
 arch/arm/mach-pxa/saar.c           |    2 +-
 arch/arm/mach-pxa/spitz.c          |   12 ++++++----
 arch/arm/mach-pxa/stargate2.c      |    4 +-
 arch/arm/mach-pxa/tavorevb.c       |    2 +-
 arch/arm/mach-pxa/tavorevb3.c      |    2 +-
 arch/arm/mach-pxa/tosa.c           |    2 +-
 arch/arm/mach-pxa/trizeps4.c       |    2 +-
 arch/arm/mach-pxa/viper.c          |    2 +-
 arch/arm/mach-pxa/vpac270.c        |    2 +-
 arch/arm/mach-pxa/xcep.c           |    2 +-
 arch/arm/mach-pxa/z2.c             |    2 +-
 arch/arm/mach-pxa/zeus.c           |    2 +-
 arch/arm/mach-pxa/zylonite.c       |    2 +-
 50 files changed, 104 insertions(+), 80 deletions(-)
arch/arm/mach-pxa/balloon3.c +1 -1
index 79d0f6c..309bf27 100644
@@ -802,7 +802,7 @@ static struct map_desc balloon3_io_desc[] __initdata = {
 
 static void __init balloon3_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
 }
 
arch/arm/mach-pxa/capc7117.c +1 -1
index aae5446..4ef5e7a 100644
@@ -151,7 +151,7 @@ MACHINE_START(CAPC7117,
 	.phys_io = 0x40000000,
 	.boot_params = 0xa0000100,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io = pxa_map_io,
+	.map_io = pxa3xx_map_io,
 	.init_irq = pxa3xx_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = capc7117_init
arch/arm/mach-pxa/cm-x2xx.c +2 -2
index ad40e7b..c698836 100644
@@ -500,7 +500,7 @@ static struct map_desc cmx2xx_io_desc[] __initdata = {
 
 static void __init cmx2xx_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
 
 	it8152_base_address = CMX2XX_IT8152_VIRT;
@@ -508,7 +508,7 @@ static void __init cmx2xx_map_io(void)
 #else
 static void __init cmx2xx_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 }
 #endif
 
arch/arm/mach-pxa/cm-x300.c +1 -1
index 8e0b562..9ded46c 100644
@@ -859,7 +859,7 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
arch/arm/mach-pxa/colibri-pxa270.c +2 -2
index 98673ac..b02784d 100644
@@ -211,7 +211,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -221,7 +221,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
arch/arm/mach-pxa/colibri-pxa300.c +1 -1
index 40b6ac2..2b6532b 100644
@@ -190,7 +190,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
arch/arm/mach-pxa/colibri-pxa320.c +1 -1
index 99e850d..aafb49a 100644
@@ -259,7 +259,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
arch/arm/mach-pxa/corgi.c +3 -3
index 3fb0fc0..4fad783 100644
@@ -723,7 +723,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
@@ -735,7 +735,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
@@ -747,7 +747,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
arch/arm/mach-pxa/csb726.c +1 -1
index 91fd4fe..dab9d92 100644
@@ -275,7 +275,7 @@ MACHINE_START(CSB726, "Cogent CSB726")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.init_machine   = csb726_init,
 	.timer          = &pxa_timer,
arch/arm/mach-pxa/em-x270.c +2 -2
index 51286a7..b4625b9 100644
@@ -1303,7 +1303,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
@@ -1313,7 +1313,7 @@ MACHINE_START(EXEDA, "Compulab eXeda")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
arch/arm/mach-pxa/eseries.c +6 -6
index 4971ce1..ae15eab 100644
@@ -183,7 +183,7 @@ MACHINE_START(E330, "Toshiba e330")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -234,7 +234,7 @@ MACHINE_START(E350, "Toshiba e350")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -358,7 +358,7 @@ MACHINE_START(E400, "Toshiba e400")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -548,7 +548,7 @@ MACHINE_START(E740, "Toshiba e740")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -741,7 +741,7 @@ MACHINE_START(E750, "Toshiba e750")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -938,7 +938,7 @@ MACHINE_START(E800, "Toshiba e800")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
arch/arm/mach-pxa/ezx.c +6 -6
index f997e84..91310ab 100644
@@ -801,7 +801,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -868,7 +868,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -935,7 +935,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1128,7 +1128,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1195,7 +1195,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1236,7 +1236,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
arch/arm/mach-pxa/generic.c +29 -8
index 6451e9c..971f994 100644
@@ -91,17 +91,12 @@ EXPORT_SYMBOL(get_memclk_frequency_10khz);
  * Note 2: virtual 0xfffe0000-0xffffffff is reserved for the vector table
  *         and cache flush area.
  */
-static struct map_desc standard_io_desc[] __initdata = {
+static struct map_desc common_io_desc[] __initdata = {
   	{	/* Devs */
 		.virtual	=  0xf2000000,
 		.pfn		= __phys_to_pfn(0x40000000),
 		.length		= 0x02000000,
 		.type		= MT_DEVICE
-	}, {	/* Mem Ctl */
-		.virtual	=  0xf6000000,
-		.pfn		= __phys_to_pfn(0x48000000),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
 	}, {	/* Camera */
 		.virtual	=  0xfa000000,
 		.pfn		= __phys_to_pfn(0x50000000),
@@ -120,8 +115,34 @@ static struct map_desc standard_io_desc[] __initdata = {
 	}
 };
 
-void __init pxa_map_io(void)
+static struct map_desc pxa2xx_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	=  0xf6000000,
+		.pfn		= __phys_to_pfn(0x48000000),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	}
+};
+
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	=  0xf6000000,
+		.pfn		= __phys_to_pfn(0x4a000000),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init pxa2xx_map_io(void)
+{
+	iotable_init(common_io_desc, ARRAY_SIZE(common_io_desc));
+	iotable_init(pxa2xx_io_desc, ARRAY_SIZE(pxa2xx_io_desc));
+	get_clk_frequency_khz(1);
+}
+
+void __init pxa3xx_map_io(void)
 {
-	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+	iotable_init(common_io_desc, ARRAY_SIZE(common_io_desc));
+	iotable_init(pxa3xx_io_desc, ARRAY_SIZE(pxa3xx_io_desc));
 	get_clk_frequency_khz(1);
 }
arch/arm/mach-pxa/generic.h +2 -1
index 4b1ad27..4667232 100644
@@ -20,7 +20,8 @@ extern void __init pxa26x_init_irq(void);
 #endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
-extern void __init pxa_map_io(void);
+extern void __init pxa2xx_map_io(void);
+extern void __init pxa3xx_map_io(void);
 
 extern unsigned int get_clk_frequency_khz(int info);
 
arch/arm/mach-pxa/gumstix.c +1 -1
index 96c3451..3482351 100644
@@ -227,7 +227,7 @@ MACHINE_START(GUMSTIX, "Gumstix")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= gumstix_init,
arch/arm/mach-pxa/h5000.c +1 -1
index c1cab08..9048066 100644
@@ -204,7 +204,7 @@ MACHINE_START(H5400, "HP iPAQ H5000")
 	.phys_io = 0x40000000,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa2xx_map_io,
 	.init_irq = pxa25x_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = h5000_init,
arch/arm/mach-pxa/himalaya.c +1 -1
index f9a2e4b..6460afe 100644
@@ -162,7 +162,7 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
 	.phys_io = 0x40000000,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa2xx_map_io,
 	.init_irq = pxa25x_init_irq,
 	.init_machine = himalaya_init,
 	.timer = &pxa_timer,
arch/arm/mach-pxa/hx4700.c +1 -1
index 10104f1..0d73d77 100644
@@ -873,7 +873,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
 	.phys_io      = 0x40000000,
 	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params  = 0xa0000100,
-	.map_io       = pxa_map_io,
+	.map_io       = pxa2xx_map_io,
 	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
 	.init_machine = hx4700_init,
arch/arm/mach-pxa/icontrol.c +1 -1
index 5ccb0ce..9525976 100644
@@ -194,7 +194,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= icontrol_init
arch/arm/mach-pxa/idp.c +1 -1
index bc78c4d..80920be 100644
@@ -187,7 +187,7 @@ static struct map_desc idp_io_desc[] __initdata = {
 
 static void __init idp_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
 }
 
arch/arm/mach-pxa/littleton.c +1 -1
index eb58506..9fa46fc 100644
@@ -440,7 +440,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
arch/arm/mach-pxa/lpd270.c +1 -1
index fc9502e..f1685cc 100644
@@ -495,7 +495,7 @@ static struct map_desc lpd270_io_desc[] __initdata = {
 
 static void __init lpd270_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 
 	/* for use I SRAM as framebuffer.  */
arch/arm/mach-pxa/lubbock.c +1 -1
index 1956c23..e73fc1d 100644
@@ -549,7 +549,7 @@ static struct map_desc lubbock_io_desc[] __initdata = {
 
 static void __init lubbock_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
 
 	PCFR |= PCFR_OPDE;
arch/arm/mach-pxa/magician.c +1 -1
index 42a0c2b..3da95c1 100644
@@ -767,7 +767,7 @@ MACHINE_START(MAGICIAN, "HTC Magician")
 	.phys_io = 0x40000000,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa2xx_map_io,
 	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.init_machine = magician_init,
arch/arm/mach-pxa/mainstone.c +1 -1
index 126dca1..12f5e9e 100644
@@ -614,7 +614,7 @@ static struct map_desc mainstone_io_desc[] __initdata = {
 
 static void __init mainstone_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
 
  	/*	for use I SRAM as framebuffer.	*/
arch/arm/mach-pxa/mioa701.c +1 -1
index ffb3f5a..29fb0fd 100644
@@ -822,7 +822,7 @@ MACHINE_START(MIOA701, "MIO A701")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= &pxa_map_io,
+	.map_io		= &pxa2xx_map_io,
 	.init_irq	= &pxa27x_init_irq,
 	.init_machine	= mioa701_machine_init,
 	.timer		= &pxa_timer,
arch/arm/mach-pxa/mp900.c +1 -1
index 6d45039..2a8f2fa 100644
@@ -96,7 +96,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.boot_params	= 0xa0220100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.timer		= &pxa_timer,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= mp900c_init,
 MACHINE_END
arch/arm/mach-pxa/palmld.c +1 -1
index 3ff0c4a..2a07d65 100644
@@ -313,7 +313,7 @@ static struct map_desc palmld_io_desc[] __initdata = {
 
 static void __init palmld_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
 }
 
arch/arm/mach-pxa/palmt5.c +1 -1
index 5b9f766..16e166d 100644
@@ -205,7 +205,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.phys_io	= PALMT5_PHYS_IO_START,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
arch/arm/mach-pxa/palmtc.c +1 -1
index ce1104d..b64ed70 100644
@@ -415,7 +415,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
 	.phys_io	= 0x40000000,
 	.boot_params 	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmtc_init
arch/arm/mach-pxa/palmte2.c +1 -1
index 93c11a0..30ff350 100644
@@ -376,7 +376,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmte2_init
arch/arm/mach-pxa/palmtreo.c +2 -2
index f685a60..daa6992 100644
@@ -444,7 +444,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.phys_io        = TREO_PHYS_IO_START,
 	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -455,7 +455,7 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.phys_io        = TREO_PHYS_IO_START,
 	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
arch/arm/mach-pxa/palmtx.c +1 -1
index 89a3792..5beab29 100644
@@ -333,7 +333,7 @@ static struct map_desc palmtx_io_desc[] __initdata = {
 
 static void __init palmtx_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
arch/arm/mach-pxa/palmz72.c +1 -1
index 38f4425..efab229 100644
@@ -282,7 +282,7 @@ MACHINE_START(PALMZ72, "Palm Zire72")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= io_p2v(0x40000000),
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmz72_init
arch/arm/mach-pxa/pcm027.c +1 -1
index 90b08ba..992b850 100644
@@ -244,7 +244,7 @@ static void __init pcm027_init(void)
 
 static void __init pcm027_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 
 	/* initialize sleep mode regs (wake-up sources, etc) */
 	PGSR0 = 0x01308000;
arch/arm/mach-pxa/poodle.c +1 -1
index c04e025..824f529 100644
@@ -468,7 +468,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_poodle,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
arch/arm/mach-pxa/raumfeld.c +3 -3
index 67e04f4..2920144 100644
@@ -1087,7 +1087,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_controller_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -1099,7 +1099,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_connector_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -1111,7 +1111,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_speaker_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
arch/arm/mach-pxa/saar.c +1 -1
index 115b6f2..a2c9d28 100644
@@ -599,7 +599,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	.phys_io        = 0x40000000,
 	.boot_params    = 0xa0000100,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saar_init,
arch/arm/mach-pxa/spitz.c +7 -5
index 1cd99cb..3fa9c02 100644
@@ -27,6 +27,7 @@
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
+#include <linux/io.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -44,6 +45,7 @@
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl_pm.h>
+#include <mach/pxa-smemc.h>
 
 #include <plat/i2c.h>
 
@@ -930,8 +932,8 @@ static void spitz_poweroff(void)
 static void spitz_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
-	if ((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if ((__raw_readl(MSC0) & 0xffff0000) == 0x7ff00000)
+		__raw_writel((__raw_readl(MSC0) & 0xffff) | 0x7ee00000, MSC0);
 
 	spitz_poweroff();
 }
@@ -982,7 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
@@ -994,7 +996,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
@@ -1006,7 +1008,7 @@ MACHINE_START(AKITA, "SHARP Akita")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
arch/arm/mach-pxa/stargate2.c +2 -2
index 62de073..2f45af4 100644
@@ -1000,7 +1000,7 @@ static void __init stargate2_init(void)
 MACHINE_START(INTELMOTE2, "IMOTE 2")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
@@ -1012,7 +1012,7 @@ MACHINE_END
 MACHINE_START(STARGATE2, "Stargate 2")
 	.phys_io = 0x40000000,
 	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io = pxa_map_io,
+	.map_io = pxa2xx_map_io,
 	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.timer = &pxa_timer,
arch/arm/mach-pxa/tavorevb.c +1 -1
index 0f440c9..edade46 100644
@@ -492,7 +492,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	.phys_io        = 0x40000000,
 	.boot_params    = 0xa0000100,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = tavorevb_init,
arch/arm/mach-pxa/tavorevb3.c +1 -1
index 5eeba64..551e6a4 100644
@@ -128,7 +128,7 @@ static void __init evb3_init(void)
 MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= TAVOREVB3_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
arch/arm/mach-pxa/tosa.c +1 -1
index 3a06e98..86b6c7a 100644
@@ -955,7 +955,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup          = fixup_tosa,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa2xx_map_io,
 	.nr_irqs	= TOSA_NR_IRQS,
 	.init_irq       = pxa25x_init_irq,
 	.init_machine   = tosa_init,
arch/arm/mach-pxa/trizeps4.c +1 -1
index 0acff17..d4ecc25 100644
@@ -539,7 +539,7 @@ static void __init trizeps4_init(void)
 
 static void __init trizeps4_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
 	if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
arch/arm/mach-pxa/viper.c +1 -1
index e90114a..8015405 100644
@@ -983,7 +983,7 @@ static struct map_desc viper_io_desc[] __initdata = {
 
 static void __init viper_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 
 	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
 
arch/arm/mach-pxa/vpac270.c +1 -1
index 37d6173..07c35eb 100644
@@ -721,7 +721,7 @@ MACHINE_START(VPAC270, "Voipac PXA270")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= vpac270_init
arch/arm/mach-pxa/xcep.c +1 -1
index d3b4e3f..649e74b 100644
@@ -185,7 +185,7 @@ MACHINE_START(XCEP, "Iskratel XCEP")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.init_machine	= xcep_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
arch/arm/mach-pxa/z2.c +1 -1
index 8c44bc4..02bf4e5 100644
@@ -706,7 +706,7 @@ MACHINE_START(ZIPIT2, "Zipit Z2")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa2xx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= z2_init,
arch/arm/mach-pxa/zeus.c +1 -1
index 9da2b62..96a064f 100644
@@ -883,7 +883,7 @@ static struct map_desc zeus_io_desc[] __initdata = {
 
 static void __init zeus_map_io(void)
 {
-	pxa_map_io();
+	pxa2xx_map_io();
 
 	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
 
arch/arm/mach-pxa/zylonite.c +1 -1
index 69df3ed..908eed4 100644
@@ -414,7 +414,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
Signature · 1 line
1.7.1
#1 lore raw

PATCH 2/13 ARM: pxa: Access SMEMC via virtual addresses

This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well.

Also, various places in the kernel had to be patched to use __raw_read/__raw_write.

---
 arch/arm/mach-pxa/cm-x2xx.c                  |   13 +++--
 arch/arm/mach-pxa/cpufreq-pxa2xx.c           |   10 ++--
 arch/arm/mach-pxa/csb726.c                   |    7 ++-
 arch/arm/mach-pxa/generic.c                  |    9 ++--
 arch/arm/mach-pxa/h5000.c                    |    9 ++--
 arch/arm/mach-pxa/include/mach/pxa-smemc.h   |   74 ++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/pxa2xx-regs.h |   55 -------------------
 arch/arm/mach-pxa/lpd270.c                   |    3 +-
 arch/arm/mach-pxa/lubbock.c                  |    3 +-
 arch/arm/mach-pxa/mainstone.c                |    5 +-
 arch/arm/mach-pxa/pxa27x.c                   |    6 ++-
 arch/arm/mach-pxa/sleep.S                    |    2 +-
 arch/arm/mach-pxa/smemc.c                    |   51 ++++++------------
 arch/arm/mach-pxa/stargate2.c                |    3 +-
 arch/arm/mach-pxa/tosa.c                     |    7 ++-
 arch/arm/mach-pxa/trizeps4.c                 |    3 +-
 arch/arm/mach-pxa/xcep.c                     |    5 +-
 arch/arm/mach-pxa/zeus.c                     |    5 +-
 drivers/pcmcia/pxa2xx_base.c                 |   65 +++++++++++++++-------
 19 files changed, 189 insertions(+), 146 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/pxa-smemc.h
arch/arm/mach-pxa/cm-x2xx.c +7 -6
index c698836..2823466 100644
@@ -24,6 +24,7 @@
 #include <mach/pxa2xx-regs.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
+#include <mach/pxa-smemc.h>
 
 #include <asm/hardware/it8152.h>
 
@@ -392,9 +393,9 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
 	cmx2xx_pci_suspend();
 
 	/* save MSC registers */
-	sleep_save_msc[0] = MSC0;
-	sleep_save_msc[1] = MSC1;
-	sleep_save_msc[2] = MSC2;
+	sleep_save_msc[0] = __raw_readl(MSC0);
+	sleep_save_msc[1] = __raw_readl(MSC1);
+	sleep_save_msc[2] = __raw_readl(MSC2);
 
 	/* setup power saving mode registers */
 	PCFR = 0x0;
@@ -416,9 +417,9 @@ static int cmx2xx_resume(struct sys_device *dev)
 	cmx2xx_pci_resume();
 
 	/* restore MSC registers */
-	MSC0 = sleep_save_msc[0];
-	MSC1 = sleep_save_msc[1];
-	MSC2 = sleep_save_msc[2];
+	__raw_writel(sleep_save_msc[0], MSC0);
+	__raw_writel(sleep_save_msc[1], MSC1);
+	__raw_writel(sleep_save_msc[2], MSC2);
 
 	return 0;
 }
arch/arm/mach-pxa/cpufreq-pxa2xx.c +6 -4
index 58093d9..1af67ad 100644
@@ -38,8 +38,10 @@
 #include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>
+#include <linux/io.h>
 
 #include <mach/pxa2xx-regs.h>
+#include <mach/pxa-smemc.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
@@ -242,7 +244,7 @@ static void pxa27x_guess_max_freq(void)
 
 static void init_sdram_rows(void)
 {
-	uint32_t mdcnfg = MDCNFG;
+	uint32_t mdcnfg = __raw_readl(MDCNFG);
 	unsigned int drac2 = 0, drac0 = 0;
 
 	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
@@ -331,8 +333,8 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	 * we need to preset the smaller DRI before the change.	 If we're
 	 * speeding up we need to set the larger DRI value after the change.
 	 */
-	preset_mdrefr = postset_mdrefr = MDREFR;
-	if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+	if ((__raw_readl(MDREFR) & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
 		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
 		preset_mdrefr |= mdrefr_dri(new_freq_mem);
 	}
@@ -370,7 +372,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 3:		nop							\n\
 	  "
 		     : "=&r" (unused)
-		     : "r" (&MDREFR), "r" (cclkcfg),
+		     : "r" (MDREFR), "r" (cclkcfg),
 		       "r" (preset_mdrefr), "r" (postset_mdrefr)
 		     : "r4", "r5");
 	local_irq_restore(flags);
arch/arm/mach-pxa/csb726.c +4 -3
index dab9d92..317adbd 100644
@@ -27,6 +27,7 @@
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/audio.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -255,9 +256,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init csb726_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
-/*	MSC2 = 0x06697ff4; *//* none/SM501 */
-	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
arch/arm/mach-pxa/generic.c +5 -4
index 971f994..6d621bb 100644
@@ -28,6 +28,7 @@
 
 #include <mach/reset.h>
 #include <mach/gpio.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 
@@ -117,8 +118,8 @@ static struct map_desc common_io_desc[] __initdata = {
 
 static struct map_desc pxa2xx_io_desc[] __initdata = {
 	{	/* Mem Ctl */
-		.virtual	=  0xf6000000,
-		.pfn		= __phys_to_pfn(0x48000000),
+		.virtual	=  PXA_SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
 		.length		= 0x00200000,
 		.type		= MT_DEVICE
 	}
@@ -126,8 +127,8 @@ static struct map_desc pxa2xx_io_desc[] __initdata = {
 
 static struct map_desc pxa3xx_io_desc[] __initdata = {
 	{	/* Mem Ctl */
-		.virtual	=  0xf6000000,
-		.pfn		= __phys_to_pfn(0x4a000000),
+		.virtual	=  PXA_SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA3XX_SMEMC_BASE),
 		.length		= 0x00200000,
 		.type		= MT_DEVICE
 	}
arch/arm/mach-pxa/h5000.c +5 -4
index 9048066..3f69fce 100644
@@ -32,6 +32,7 @@
 #include <mach/pxa25x.h>
 #include <mach/h5000.h>
 #include <mach/udc.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 
@@ -172,11 +173,11 @@ static unsigned long h5000_pin_config[] __initdata = {
 
 static void fix_msc(void)
 {
-	MSC0 = 0x129c24f2;
-	MSC1 = 0x7ff424fa;
-	MSC2 = 0x7ff47ff4;
+	__raw_writel(0x129c24f2, MSC0);
+	__raw_writel(0x7ff424fa, MSC1);
+	__raw_writel(0x7ff47ff4, MSC2);
 
-	MDREFR |= 0x02080000;
+	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
 }
 
 /*
arch/arm/mach-pxa/include/mach/pxa-smemc.h new file +74 -0

74 lines not on this page · raw message

arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +0 -55

61 lines not on this page · raw message

arch/arm/mach-pxa/lpd270.c +2 -1
index f1685cc..40a219a 100644
@@ -46,6 +46,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -463,7 +464,7 @@ static void __init lpd270_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
 	/*
arch/arm/mach-pxa/lubbock.c +2 -1
index e73fc1d..e16450e 100644
@@ -50,6 +50,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pm.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -525,7 +526,7 @@ static void __init lubbock_init(void)
 	pxa_set_ac97_info(NULL);
 
 	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(BOOT_DEF & 1) ? 2 : 4;
+		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	/* Compensate for the nROMBT switch which swaps the flash banks */
 	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
 	       flashboot?"Flash":"ROM", flashboot);
arch/arm/mach-pxa/mainstone.c +3 -2
index 12f5e9e..f3ea1d7 100644
@@ -41,7 +41,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <plat/pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/gpio.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
@@ -51,6 +51,7 @@
 #include <mach/irda.h>
 #include <mach/ohci.h>
 #include <plat/pxa27x_keypad.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -565,7 +566,7 @@ static void __init mainstone_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	mst_flash_data[1].width = 4;
 
 	/* Compensate for SW7 which swaps the flash banks */
arch/arm/mach-pxa/pxa27x.c +4 -2
index 12e5b9f..b1b01e6 100644
@@ -17,6 +17,7 @@
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -27,6 +28,7 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
+#include <mach/pxa-smemc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -254,7 +256,7 @@ enum {
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(MDREFR);
+	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
 	SAVE(PCFR);
 
 	SAVE(CKEN);
@@ -263,7 +265,7 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 
 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	RESTORE(MDREFR);
+	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
 	RESTORE(PCFR);
 
 	PSSR = PSSR_RDH | PSSR_PH;
arch/arm/mach-pxa/sleep.S +1 -1
index 52c30b0..227df3a 100644
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
-
+#include <mach/pxa-smemc.h>
 #include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
arch/arm/mach-pxa/smemc.c +17 -34

77 lines not on this page · raw message

arch/arm/mach-pxa/stargate2.c +2 -1
index 2f45af4..61af9a0 100644
@@ -48,6 +48,7 @@
 #include <mach/udc.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x-udc.h>
+#include <mach/pxa-smemc.h>
 
 #include <linux/spi/spi.h>
 #include <linux/mfd/da903x.h>
@@ -976,7 +977,7 @@ static void __init stargate2_init(void)
 {
 	/* This is probably a board specific hack as this must be set
 	   prior to connecting the MFP stuff up. */
-	MECR &= ~MECR_NOS;
+	__raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
arch/arm/mach-pxa/tosa.c +5 -2
index 86b6c7a..1fe9e98 100644
@@ -46,6 +46,7 @@
 #include <mach/tosa_bt.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/audio.h>
+#include <mach/pxa-smemc.h>
 
 #include <asm/mach/arch.h>
 #include <mach/tosa.h>
@@ -893,9 +894,11 @@ static void tosa_poweroff(void)
 
 static void tosa_restart(char mode, const char *cmd)
 {
+	uint32_t msc0 = __raw_readl(MSC0);
+
 	/* Bootloader magic for a reboot */
-	if((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if((msc0 & 0xffff0000) == 0x7ff00000)
+		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
 
 	tosa_poweroff();
 }
arch/arm/mach-pxa/trizeps4.c +2 -1
index d4ecc25..881f77d 100644
@@ -47,6 +47,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/pxa-smemc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -542,7 +543,7 @@ static void __init trizeps4_map_io(void)
 	pxa2xx_map_io();
 	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
-	if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+	if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
 		/* if flash is 16 bit wide its a Trizeps4 WL */
 		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
 		trizeps4_flash_data[0].width = 2;
arch/arm/mach-pxa/xcep.c +3 -2
index 649e74b..bd8a38f 100644
@@ -31,6 +31,7 @@
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 
@@ -172,9 +173,9 @@ static void __init xcep_init(void)
 
 	/* See Intel XScale Developer's Guide for details */
 	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
-	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+	__raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
 	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
-	MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+	__raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
 
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 	pxa_set_i2c_info(&xcep_i2c_platform_data);
arch/arm/mach-pxa/zeus.c +3 -2
index 96a064f..cf410ba 100644
@@ -47,6 +47,7 @@
 #include <mach/audio.h>
 #include <mach/arcom-pcmcia.h>
 #include <mach/zeus.h>
+#include <mach/pxa-smemc.h>
 
 #include "generic.h"
 
@@ -828,8 +829,8 @@ static void __init zeus_init(void)
 	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
 
 	/* Fix timings for dm9000s (CS1/CS2)*/
-	MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
-	MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+	__raw_writel((MSC0 & 0xffff) | (dm9000_msc << 16), MSC0);
+	__raw_writel((MSC1 & 0xffff0000) | dm9000_msc, MSC1);
 
 	pm_power_off = zeus_power_off;
 	zeus_setup_apm();
drivers/pcmcia/pxa2xx_base.c +44 -21

138 lines not on this page · raw message

Signature · 1 line
1.7.1
maintainer
#2 lore raw

PATCH 2/13 ARM: pxa: Access SMEMC via virtual addresses

Quoted 744 lines · Marek Vasut

This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well.

Also, various places in the kernel had to be patched to use __raw_read/__raw_write.

---

?arch/arm/mach-pxa/cm-x2xx.c ? ? ? ? ? ? ? ? ?| ? 13 +++--
?arch/arm/mach-pxa/cpufreq-pxa2xx.c ? ? ? ? ? | ? 10 ++--
?arch/arm/mach-pxa/csb726.c ? ? ? ? ? ? ? ? ? | ? ?7 ++-
?arch/arm/mach-pxa/generic.c ? ? ? ? ? ? ? ? ?| ? ?9 ++--
?arch/arm/mach-pxa/h5000.c ? ? ? ? ? ? ? ? ? ?| ? ?9 ++--
?arch/arm/mach-pxa/include/mach/pxa-smemc.h ? | ? 74 ++++++++++++++++++++++++++
?arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | ? 55 -------------------
?arch/arm/mach-pxa/lpd270.c ? ? ? ? ? ? ? ? ? | ? ?3 +-
?arch/arm/mach-pxa/lubbock.c ? ? ? ? ? ? ? ? ?| ? ?3 +-
?arch/arm/mach-pxa/mainstone.c ? ? ? ? ? ? ? ?| ? ?5 +-
?arch/arm/mach-pxa/pxa27x.c ? ? ? ? ? ? ? ? ? | ? ?6 ++-
?arch/arm/mach-pxa/sleep.S ? ? ? ? ? ? ? ? ? ?| ? ?2 +-
?arch/arm/mach-pxa/smemc.c ? ? ? ? ? ? ? ? ? ?| ? 51 ++++++------------
?arch/arm/mach-pxa/stargate2.c ? ? ? ? ? ? ? ?| ? ?3 +-
?arch/arm/mach-pxa/tosa.c ? ? ? ? ? ? ? ? ? ? | ? ?7 ++-
?arch/arm/mach-pxa/trizeps4.c ? ? ? ? ? ? ? ? | ? ?3 +-
?arch/arm/mach-pxa/xcep.c ? ? ? ? ? ? ? ? ? ? | ? ?5 +-
?arch/arm/mach-pxa/zeus.c ? ? ? ? ? ? ? ? ? ? | ? ?5 +-
?drivers/pcmcia/pxa2xx_base.c ? ? ? ? ? ? ? ? | ? 65 +++++++++++++++-------

?19 files changed, 189 insertions(+), 146 deletions(-) ?create mode 100644 arch/arm/mach-pxa/include/mach/pxa-smemc.h

arch/arm/mach-pxa/cm-x2xx.c +0 -0
index c698836..2823466 100644
@@ -24,6 +24,7 @@

?#include <mach/pxa2xx-regs.h>
?#include <mach/audio.h>
?#include <mach/pxafb.h>
+#include <mach/pxa-smemc.h>

?#include <asm/hardware/it8152.h>

arch/arm/mach-pxa/cm-x2xx.c +0 -0
@@ -392,9 +393,9 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
 ? ? ? ?cmx2xx_pci_suspend();
 

? ? ? ?/* save MSC registers */
- ? ? ? sleep_save_msc[0] = MSC0;
- ? ? ? sleep_save_msc[1] = MSC1;
- ? ? ? sleep_save_msc[2] = MSC2;
+ ? ? ? sleep_save_msc[0] = __raw_readl(MSC0);
+ ? ? ? sleep_save_msc[1] = __raw_readl(MSC1);
+ ? ? ? sleep_save_msc[2] = __raw_readl(MSC2);

? ? ? ?/* setup power saving mode registers */
? ? ? ?PCFR = 0x0;

arch/arm/mach-pxa/cm-x2xx.c +0 -0
@@ -416,9 +417,9 @@ static int cmx2xx_resume(struct sys_device *dev)
 ? ? ? ?cmx2xx_pci_resume();
 

? ? ? ?/* restore MSC registers */
- ? ? ? MSC0 = sleep_save_msc[0];
- ? ? ? MSC1 = sleep_save_msc[1];
- ? ? ? MSC2 = sleep_save_msc[2];
+ ? ? ? __raw_writel(sleep_save_msc[0], MSC0);
+ ? ? ? __raw_writel(sleep_save_msc[1], MSC1);
+ ? ? ? __raw_writel(sleep_save_msc[2], MSC2);

? ? ? ?return 0;
?}

arch/arm/mach-pxa/cpufreq-pxa2xx.c +0 -0
index 58093d9..1af67ad 100644
@@ -38,8 +38,10 @@

?#include <linux/cpufreq.h>
?#include <linux/err.h>
?#include <linux/regulator/consumer.h>
+#include <linux/io.h>

?#include <mach/pxa2xx-regs.h>
+#include <mach/pxa-smemc.h>

?#ifdef DEBUG
?static unsigned int freq_debug;

arch/arm/mach-pxa/cpufreq-pxa2xx.c +1 -1
@@ -242,7 +244,7 @@ static void pxa27x_guess_max_freq(void)
 
 ?static void init_sdram_rows(void)
 ?{
- ? ? ? uint32_t mdcnfg = MDCNFG;
+ ? ? ? uint32_t mdcnfg = __raw_readl(MDCNFG);
 ? ? ? ?unsigned int drac2 = 0, drac0 = 0;
 
 ? ? ? ?if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
@@ -331,8 +333,8 @@ static int pxa_set_target(struct cpufreq_policy *policy,

? ? ? ? * we need to preset the smaller DRI before the change. ?If we're ? ? ? ? * speeding up we need to set the larger DRI value after the change. ? ? ? ? */
- ? ? ? preset_mdrefr = postset_mdrefr = MDREFR;
- ? ? ? if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+ ? ? ? preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+ ? ? ? if ((__raw_readl(MDREFR) & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) { ? ? ? ? ? ? ? ?preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
? ? ? ? ? ? ? ?preset_mdrefr |= mdrefr_dri(new_freq_mem);
? ? ? ?}

arch/arm/mach-pxa/cpufreq-pxa2xx.c +0 -0
@@ -370,7 +372,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 ?3: ? ? ? ? ? ? nop ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? \n\

? ? ? ? ?"
? ? ? ? ? ? ? ? ? ? : "=&r" (unused)
- ? ? ? ? ? ? ? ? ? ?: "r" (&MDREFR), "r" (cclkcfg),
+ ? ? ? ? ? ? ? ? ? ?: "r" (MDREFR), "r" (cclkcfg),
? ? ? ? ? ? ? ? ? ? ? "r" (preset_mdrefr), "r" (postset_mdrefr) ? ? ? ? ? ? ? ? ? ? : "r4", "r5");
? ? ? ?local_irq_restore(flags);

arch/arm/mach-pxa/csb726.c +0 -0
index dab9d92..317adbd 100644
@@ -27,6 +27,7 @@

?#include <mach/ohci.h>
?#include <mach/pxa2xx-regs.h>
?#include <mach/audio.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"
?#include "devices.h"

arch/arm/mach-pxa/csb726.c +3 -3
@@ -255,9 +256,9 @@ static struct platform_device *devices[] __initdata = {
 ?static void __init csb726_init(void)
 ?{
 ? ? ? ?pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/* ? ? MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
-/* ? ? MSC2 = 0x06697ff4; *//* none/SM501 */
- ? ? ? MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+/* ? ? __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/* ? ? __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+ ? ? ? __raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
 
 ? ? ? ?pxa_set_ffuart_info(NULL);
 ? ? ? ?pxa_set_btuart_info(NULL);
arch/arm/mach-pxa/generic.c +0 -0
index 971f994..6d621bb 100644
@@ -28,6 +28,7 @@
 

?#include <mach/reset.h>
?#include <mach/gpio.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"

arch/arm/mach-pxa/generic.c +0 -0
@@ -117,8 +118,8 @@ static struct map_desc common_io_desc[] __initdata = {
 
 ?static struct map_desc pxa2xx_io_desc[] __initdata = {

? ? ? ?{ ? ? ? /* Mem Ctl */
- ? ? ? ? ? ? ? .virtual ? ? ? ?= ?0xf6000000,
- ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(0x48000000),
+ ? ? ? ? ? ? ? .virtual ? ? ? ?= ?PXA_SMEMC_VIRT,
+ ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(PXA2XX_SMEMC_BASE), ? ? ? ? ? ? ? ?.length ? ? ? ? = 0x00200000,
? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE
? ? ? ?}

arch/arm/mach-pxa/generic.c +0 -0
@@ -126,8 +127,8 @@ static struct map_desc pxa2xx_io_desc[] __initdata = {
 
 ?static struct map_desc pxa3xx_io_desc[] __initdata = {

? ? ? ?{ ? ? ? /* Mem Ctl */
- ? ? ? ? ? ? ? .virtual ? ? ? ?= ?0xf6000000,
- ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(0x4a000000),
+ ? ? ? ? ? ? ? .virtual ? ? ? ?= ?PXA_SMEMC_VIRT,
+ ? ? ? ? ? ? ? .pfn ? ? ? ? ? ?= __phys_to_pfn(PXA3XX_SMEMC_BASE), ? ? ? ? ? ? ? ?.length ? ? ? ? = 0x00200000,
? ? ? ? ? ? ? ?.type ? ? ? ? ? = MT_DEVICE
? ? ? ?}

arch/arm/mach-pxa/h5000.c +0 -0
index 9048066..3f69fce 100644
@@ -32,6 +32,7 @@

?#include <mach/pxa25x.h>
?#include <mach/h5000.h>
?#include <mach/udc.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"

arch/arm/mach-pxa/h5000.c +4 -4
@@ -172,11 +173,11 @@ static unsigned long h5000_pin_config[] __initdata = {
 
 ?static void fix_msc(void)
 ?{
- ? ? ? MSC0 = 0x129c24f2;
- ? ? ? MSC1 = 0x7ff424fa;
- ? ? ? MSC2 = 0x7ff47ff4;
+ ? ? ? __raw_writel(0x129c24f2, MSC0);
+ ? ? ? __raw_writel(0x7ff424fa, MSC1);
+ ? ? ? __raw_writel(0x7ff47ff4, MSC2);
 
- ? ? ? MDREFR |= 0x02080000;
+ ? ? ? __raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
 ?}
 

?/*

arch/arm/mach-pxa/include/mach/pxa-smemc.h new file +74 -0
new file mode 100644
index 0000000..e3b270b
@@ -0,0 +1,74 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_SMEMC_REGS_H
+#define __PXA_SMEMC_REGS_H
+
+#define ? ? ? ?PXA2XX_SMEMC_BASE ? ? ? 0x48000000
+#define ? ? ? ?PXA3XX_SMEMC_BASE ? ? ? 0x4a000000
+#define ? ? ? ?PXA_SMEMC_VIRT ? ? ? ? ?0xf6000000
+
+#define MDCNFG ? ? ? ? (PXA_SMEMC_VIRT + 0x00) ?/* SDRAM Configuration Register 0 */
+#define MDREFR ? ? ? ? (PXA_SMEMC_VIRT + 0x04) ?/* SDRAM Refresh Control Register */
+#define MSC0 ? ? ? ? ? (PXA_SMEMC_VIRT + 0x08) ?/* Static Memory Control Register 0 */
+#define MSC1 ? ? ? ? ? (PXA_SMEMC_VIRT + 0x0C) ?/* Static Memory Control Register 1 */
+#define MSC2 ? ? ? ? ? (PXA_SMEMC_VIRT + 0x10) ?/* Static Memory Control Register 2 */
+#define MECR ? ? ? ? ? (PXA_SMEMC_VIRT + 0x14) ?/* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR ? ? ? ? ?(PXA_SMEMC_VIRT + 0x18) ?/* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG ? ? ? ? (PXA_SMEMC_VIRT + 0x1C) ?/* Synchronous Static Memory Control Register */
+#define SXMRS ? ? ? ? ?(PXA_SMEMC_VIRT + 0x24) ?/* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 ? ? ? ? (PXA_SMEMC_VIRT + 0x28) ?/* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 ? ? ? ? (PXA_SMEMC_VIRT + 0x2C) ?/* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 ? ? ? ? (PXA_SMEMC_VIRT + 0x30) ?/* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 ? ? ? ? (PXA_SMEMC_VIRT + 0x34) ?/* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 ? ? ? ? ?(PXA_SMEMC_VIRT + 0x38) ?/* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 ? ? ? ? ?(PXA_SMEMC_VIRT + 0x3C) ?/* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS ? ? ? ? ?(PXA_SMEMC_VIRT + 0x40) ?/* MRS value to be written to SDRAM */
+#define BOOT_DEF ? ? ? (PXA_SMEMC_VIRT + 0x44) ?/* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG ? ? ?(PXA_SMEMC_VIRT + 0x68) /* Clock Configuration */
+#define CSADRCFG0 ? ? ?(PXA_SMEMC_VIRT + 0x80) /* Address Configuration Register for CS0 */
+#define CSADRCFG1 ? ? ?(PXA_SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
+#define CSADRCFG2 ? ? ?(PXA_SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
+#define CSADRCFG3 ? ? ?(PXA_SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) ? ? ? (PXA_SMEMC_VIRT + 0x28 + ((s)<<2)) ?/* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) ? ? ? (PXA_SMEMC_VIRT + 0x30 + ((s)<<2)) ?/* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) ? ? ? ? ? ? ? ?(PXA_SMEMC_VIRT + 0x38 + ((s)<<2)) ?/* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS ? ? ? (1 << 0) ? ? ? ?/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT ? ? ? (1 << 1) ? ? ? ?/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0 ? ? (1 << 0) ? ? ? ?/* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 ? ? (1 << 1) ? ? ? ?/* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 ? ? (1 << 16) ? ? ? /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 ? ? (1 << 17) ? ? ? /* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4 ? (1 << 29) ? ? ? /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE ?(1 << 25) ? ? ? /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE ?(1 << 24) ? ? ? /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE ?(1 << 23) ? ? ? /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH ?(1 << 22) ? ? ? /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD ? ? (1 << 20) ? ? ? /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 ? (1 << 19) ? ? ? /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN ? (1 << 18) ? ? ? /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 ? (1 << 17) ? ? ? /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN ? (1 << 16) ? ? ? /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN ? (1 << 15) ? ? ? /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 ? (1 << 14) ? ? ? /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN ? (1 << 13) ? ? ? /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN ? (1 << 12) ? ? ? /* SDCKE0 Level Control/Status */
+
+#endif
arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +0 -0
index 4fcddd9..b98f236 100644
@@ -28,61 +28,6 @@

?#define PXA_CS5_PHYS ? 0x14000000

?/*
- * Memory controller
- */

arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +0 -53
-
-#define MDCNFG ? ? ? ? __REG(0x48000000) ?/* SDRAM Configuration Register 0 */
-#define MDREFR ? ? ? ? __REG(0x48000004) ?/* SDRAM Refresh Control Register */
-#define MSC0 ? ? ? ? ? __REG(0x48000008) ?/* Static Memory Control Register 0 */
-#define MSC1 ? ? ? ? ? __REG(0x4800000C) ?/* Static Memory Control Register 1 */
-#define MSC2 ? ? ? ? ? __REG(0x48000010) ?/* Static Memory Control Register 2 */
-#define MECR ? ? ? ? ? __REG(0x48000014) ?/* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR ? ? ? ? ?__REG(0x48000018) ?/* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG ? ? ? ? __REG(0x4800001C) ?/* Synchronous Static Memory Control Register */
-#define SXMRS ? ? ? ? ?__REG(0x48000024) ?/* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0 ? ? ? ? __REG(0x48000028) ?/* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1 ? ? ? ? __REG(0x4800002C) ?/* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0 ? ? ? ? __REG(0x48000030) ?/* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1 ? ? ? ? __REG(0x48000034) ?/* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0 ? ? ? ? ?__REG(0x48000038) ?/* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1 ? ? ? ? ?__REG(0x4800003C) ?/* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS ? ? ? ? ?__REG(0x48000040) ?/* MRS value to be written to SDRAM */
-#define BOOT_DEF ? ? ? __REG(0x48000044) ?/* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s) ? ? ? __REG2(0x48000028, (s)<<2 ) ?/* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s) ? ? ? __REG2(0x48000030, (s)<<2 ) ?/* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s) ? ? ? ? ? ? ? ?__REG2(0x48000038, (s)<<2 ) ?/* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS ? ? ? (1 << 0) ? ? ? ?/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT ? ? ? (1 << 1) ? ? ? ?/* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0 ? ? (1 << 0) ? ? ? ?/* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1 ? ? (1 << 1) ? ? ? ?/* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2 ? ? (1 << 16) ? ? ? /* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3 ? ? (1 << 17) ? ? ? /* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4 ? (1 << 29) ? ? ? /* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE ?(1 << 25) ? ? ? /* SDRAM Free-Running Control */
-#define MDREFR_K1FREE ?(1 << 24) ? ? ? /* SDRAM Free-Running Control */
-#define MDREFR_K0FREE ?(1 << 23) ? ? ? /* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH ?(1 << 22) ? ? ? /* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD ? ? (1 << 20) ? ? ? /* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2 ? (1 << 19) ? ? ? /* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN ? (1 << 18) ? ? ? /* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2 ? (1 << 17) ? ? ? /* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN ? (1 << 16) ? ? ? /* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN ? (1 << 15) ? ? ? /* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2 ? (1 << 14) ? ? ? /* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN ? (1 << 13) ? ? ? /* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN ? (1 << 12) ? ? ? /* SDCKE0 Level Control/Status */
-
-/*

?* Power Manager
?*/

arch/arm/mach-pxa/lpd270.c +0 -0
index f1685cc..40a219a 100644
@@ -46,6 +46,7 @@

?#include <mach/mmc.h>
?#include <mach/irda.h>
?#include <mach/ohci.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"
?#include "devices.h"

arch/arm/mach-pxa/lpd270.c +1 -1
@@ -463,7 +464,7 @@ static void __init lpd270_init(void)
 ? ? ? ?pxa_set_btuart_info(NULL);
 ? ? ? ?pxa_set_stuart_info(NULL);
 
- ? ? ? lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ ? ? ? lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 ? ? ? ?lpd270_flash_data[1].width = 4;
 

? ? ? ?/*

arch/arm/mach-pxa/lubbock.c +0 -0
index e73fc1d..e16450e 100644
@@ -50,6 +50,7 @@

?#include <mach/pxafb.h>
?#include <mach/mmc.h>
?#include <mach/pm.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"
?#include "clock.h"

arch/arm/mach-pxa/lubbock.c +0 -0
@@ -525,7 +526,7 @@ static void __init lubbock_init(void)
 ? ? ? ?pxa_set_ac97_info(NULL);
 

? ? ? ?lubbock_flash_data[0].width = lubbock_flash_data[1].width =
- ? ? ? ? ? ? ? (BOOT_DEF & 1) ? 2 : 4;
+ ? ? ? ? ? ? ? (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
? ? ? ?/* Compensate for the nROMBT switch which swaps the flash banks */ ? ? ? ?printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n", ? ? ? ? ? ? ? flashboot?"Flash":"ROM", flashboot);

arch/arm/mach-pxa/mainstone.c +0 -0
index 12f5e9e..f3ea1d7 100644
@@ -41,7 +41,7 @@

?#include <asm/mach/irq.h>
?#include <asm/mach/flash.h>

arch/arm/mach-pxa/mainstone.c +1 -1
-#include <plat/pxa27x.h>
+#include <mach/pxa27x.h>

?#include <mach/gpio.h>
?#include <mach/mainstone.h>
?#include <mach/audio.h>

arch/arm/mach-pxa/mainstone.c +0 -0
@@ -51,6 +51,7 @@

?#include <mach/irda.h>
?#include <mach/ohci.h>
?#include <plat/pxa27x_keypad.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"
?#include "devices.h"

arch/arm/mach-pxa/mainstone.c +1 -1
@@ -565,7 +566,7 @@ static void __init mainstone_init(void)
 ? ? ? ?pxa_set_btuart_info(NULL);
 ? ? ? ?pxa_set_stuart_info(NULL);
 
- ? ? ? mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ ? ? ? mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 ? ? ? ?mst_flash_data[1].width = 4;
 

? ? ? ?/* Compensate for SW7 which swaps the flash banks */

arch/arm/mach-pxa/pxa27x.c +0 -0
index 12e5b9f..b1b01e6 100644
@@ -17,6 +17,7 @@

?#include <linux/suspend.h>
?#include <linux/platform_device.h>
?#include <linux/sysdev.h>
+#include <linux/io.h>

?#include <mach/hardware.h>
?#include <asm/irq.h>

arch/arm/mach-pxa/pxa27x.c +0 -0
@@ -27,6 +28,7 @@

?#include <mach/ohci.h>
?#include <mach/pm.h>
?#include <mach/dma.h>
+#include <mach/pxa-smemc.h>
?#include <plat/i2c.h>

?#include "generic.h"

arch/arm/mach-pxa/pxa27x.c +2 -2
@@ -254,7 +256,7 @@ enum {
 
 ?void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 ?{
- ? ? ? SAVE(MDREFR);
+ ? ? ? sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
 ? ? ? ?SAVE(PCFR);
 
 ? ? ? ?SAVE(CKEN);
@@ -263,7 +265,7 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 
 ?void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 ?{
- ? ? ? RESTORE(MDREFR);
+ ? ? ? __raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
 ? ? ? ?RESTORE(PCFR);
 
 ? ? ? ?PSSR = PSSR_RDH | PSSR_PH;
arch/arm/mach-pxa/sleep.S +0 -0
index 52c30b0..227df3a 100644
@@ -14,7 +14,7 @@

?#include <linux/linkage.h>
?#include <asm/assembler.h>
?#include <mach/hardware.h>

arch/arm/mach-pxa/sleep.S +1 -1
-
+#include <mach/pxa-smemc.h>

?#include <mach/pxa2xx-regs.h>

?#define MDREFR_KDIV ? ?0x200a4000 ? ? ?// all banks

arch/arm/mach-pxa/smemc.c +0 -0
index d6f6904..91edda8 100644
@@ -9,50 +9,37 @@

?#include <linux/sysdev.h>

?#include <mach/hardware.h>

arch/arm/mach-pxa/smemc.c +1 -12
-
-#define SMEMC_PHYS_BASE ? ? ? ?(0x4A000000)
-#define SMEMC_PHYS_SIZE ? ? ? ?(0x90)
-
-#define MSC0 ? ? ? ? ? (0x08) ?/* Static Memory Controller Register 0 */
-#define MSC1 ? ? ? ? ? (0x0C) ?/* Static Memory Controller Register 1 */
-#define SXCNFG ? ? ? ? (0x1C) ?/* Synchronous Static Memory Control Register */
-#define MEMCLKCFG ? ? ?(0x68) ?/* Clock Configuration */
-#define CSADRCFG0 ? ? ?(0x80) ?/* Address Configuration Register for CS0 */
-#define CSADRCFG1 ? ? ?(0x84) ?/* Address Configuration Register for CS1 */
-#define CSADRCFG2 ? ? ?(0x88) ?/* Address Configuration Register for CS2 */
-#define CSADRCFG3 ? ? ?(0x8C) ?/* Address Configuration Register for CS3 */
+#include <mach/pxa-smemc.h>

?#ifdef CONFIG_PM

arch/arm/mach-pxa/smemc.c +0 -2
-static void __iomem *smemc_mmio_base;
-

?static unsigned long msc[2];
?static unsigned long sxcnfg, memclkcfg;
?static unsigned long csadrcfg[4];

?static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state) ?{
- ? ? ? msc[0] = __raw_readl(smemc_mmio_base + MSC0);
- ? ? ? msc[1] = __raw_readl(smemc_mmio_base + MSC1);
- ? ? ? sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
- ? ? ? memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
- ? ? ? csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
- ? ? ? csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
- ? ? ? csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
- ? ? ? csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+ ? ? ? msc[0] = __raw_readl(MSC0);
+ ? ? ? msc[1] = __raw_readl(MSC1);
+ ? ? ? sxcnfg = __raw_readl(SXCNFG);
+ ? ? ? memclkcfg = __raw_readl(MEMCLKCFG);
+ ? ? ? csadrcfg[0] = __raw_readl(CSADRCFG0);
+ ? ? ? csadrcfg[1] = __raw_readl(CSADRCFG1);
+ ? ? ? csadrcfg[2] = __raw_readl(CSADRCFG2);
+ ? ? ? csadrcfg[3] = __raw_readl(CSADRCFG3);

? ? ? ?return 0;
?}

?static int pxa3xx_smemc_resume(struct sys_device *dev) ?{
- ? ? ? __raw_writel(msc[0], smemc_mmio_base + MSC0);
- ? ? ? __raw_writel(msc[1], smemc_mmio_base + MSC1);
- ? ? ? __raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
- ? ? ? __raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
- ? ? ? __raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
- ? ? ? __raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
- ? ? ? __raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
- ? ? ? __raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+ ? ? ? __raw_writel(msc[0], MSC0);
+ ? ? ? __raw_writel(msc[1], MSC1);
+ ? ? ? __raw_writel(sxcnfg, SXCNFG);
+ ? ? ? __raw_writel(memclkcfg, MEMCLKCFG);
+ ? ? ? __raw_writel(csadrcfg[0], CSADRCFG0);
+ ? ? ? __raw_writel(csadrcfg[1], CSADRCFG1);
+ ? ? ? __raw_writel(csadrcfg[2], CSADRCFG2);
+ ? ? ? __raw_writel(csadrcfg[3], CSADRCFG3);

? ? ? ?return 0;
?}

arch/arm/mach-pxa/smemc.c +0 -4
@@ -73,10 +60,6 @@ static int __init smemc_init(void)
 ? ? ? ?int ret = 0;
 
 ? ? ? ?if (cpu_is_pxa3xx()) {
- ? ? ? ? ? ? ? smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
- ? ? ? ? ? ? ? if (smemc_mmio_base == NULL)
- ? ? ? ? ? ? ? ? ? ? ? return -ENODEV;
-
 ? ? ? ? ? ? ? ?ret = sysdev_class_register(&smemc_sysclass);
 ? ? ? ? ? ? ? ?if (ret)
 ? ? ? ? ? ? ? ? ? ? ? ?return ret;
arch/arm/mach-pxa/stargate2.c +0 -0
index 2f45af4..61af9a0 100644
@@ -48,6 +48,7 @@

?#include <mach/udc.h>
?#include <mach/pxa2xx_spi.h>
?#include <mach/pxa27x-udc.h>
+#include <mach/pxa-smemc.h>

?#include <linux/spi/spi.h>
?#include <linux/mfd/da903x.h>

arch/arm/mach-pxa/stargate2.c +0 -0
@@ -976,7 +977,7 @@ static void __init stargate2_init(void)
 ?{

? ? ? ?/* This is probably a board specific hack as this must be set ? ? ? ? ? prior to connecting the MFP stuff up. */
- ? ? ? MECR &= ~MECR_NOS;
+ ? ? ? __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);

? ? ? ?pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));

arch/arm/mach-pxa/tosa.c +0 -0
index 86b6c7a..1fe9e98 100644
@@ -46,6 +46,7 @@

?#include <mach/tosa_bt.h>
?#include <mach/pxa2xx_spi.h>
?#include <mach/audio.h>
+#include <mach/pxa-smemc.h>

?#include <asm/mach/arch.h>
?#include <mach/tosa.h>

arch/arm/mach-pxa/tosa.c +2 -0
@@ -893,9 +894,11 @@ static void tosa_poweroff(void)
 
 ?static void tosa_restart(char mode, const char *cmd)
 ?{
+ ? ? ? uint32_t msc0 = __raw_readl(MSC0);
+

? ? ? ?/* Bootloader magic for a reboot */
- ? ? ? if((MSC0 & 0xffff0000) == 0x7ff00000)
- ? ? ? ? ? ? ? MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+ ? ? ? if((msc0 & 0xffff0000) == 0x7ff00000)
+ ? ? ? ? ? ? ? __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);

? ? ? ?tosa_poweroff();
?}

arch/arm/mach-pxa/trizeps4.c +0 -0
index d4ecc25..881f77d 100644
@@ -47,6 +47,7 @@

?#include <mach/mmc.h>
?#include <mach/irda.h>
?#include <mach/ohci.h>
+#include <mach/pxa-smemc.h>
?#include <plat/i2c.h>

?#include "generic.h"

arch/arm/mach-pxa/trizeps4.c +1 -1
@@ -542,7 +543,7 @@ static void __init trizeps4_map_io(void)
 ? ? ? ?pxa2xx_map_io();
 ? ? ? ?iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
- ? ? ? if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+ ? ? ? if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {

? ? ? ? ? ? ? ?/* if flash is 16 bit wide its a Trizeps4 WL */ ? ? ? ? ? ? ? ?__machine_arch_type = MACH_TYPE_TRIZEPS4WL; ? ? ? ? ? ? ? ?trizeps4_flash_data[0].width = 2;

arch/arm/mach-pxa/xcep.c +0 -0
index 649e74b..bd8a38f 100644
@@ -31,6 +31,7 @@

?#include <mach/hardware.h>
?#include <mach/pxa2xx-regs.h>
?#include <mach/mfp-pxa25x.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"

arch/arm/mach-pxa/xcep.c +0 -0
@@ -172,9 +173,9 @@ static void __init xcep_init(void)
 

? ? ? ?/* See Intel XScale Developer's Guide for details */
? ? ? ?/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
- ? ? ? MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+ ? ? ? __raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1); ? ? ? ?/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
- ? ? ? MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+ ? ? ? __raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);

? ? ? ?platform_add_devices(ARRAY_AND_SIZE(devices)); ? ? ? ?pxa_set_i2c_info(&xcep_i2c_platform_data);

arch/arm/mach-pxa/zeus.c +0 -0
index 96a064f..cf410ba 100644
@@ -47,6 +47,7 @@

?#include <mach/audio.h>
?#include <mach/arcom-pcmcia.h>
?#include <mach/zeus.h>
+#include <mach/pxa-smemc.h>

?#include "generic.h"

arch/arm/mach-pxa/zeus.c +0 -0
@@ -828,8 +829,8 @@ static void __init zeus_init(void)
 ? ? ? ?pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
 

? ? ? ?/* Fix timings for dm9000s (CS1/CS2)*/
- ? ? ? MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
- ? ? ? MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+ ? ? ? __raw_writel((MSC0 & 0xffff) | (dm9000_msc << 16), MSC0);
+ ? ? ? __raw_writel((MSC1 & 0xffff0000) | dm9000_msc, MSC1);

? ? ? ?pm_power_off = zeus_power_off;
? ? ? ?zeus_setup_apm();

drivers/pcmcia/pxa2xx_base.c +0 -0
index ae07b4d..65a8b6f 100644
@@ -26,6 +26,7 @@

?#include <linux/platform_device.h>

?#include <mach/hardware.h>
+#include <mach/pxa-smemc.h>
?#include <asm/io.h>
?#include <asm/irq.h>
?#include <asm/system.h>

drivers/pcmcia/pxa2xx_base.c +15 -4
@@ -116,37 +117,49 @@ static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz,
 
 ?static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
 ?{
- ? ? ? MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ ? ? ? uint32_t val;
+
+ ? ? ? val = ((pxa2xx_mcxx_setup(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
 ? ? ? ? ? ? ? ?| ((pxa2xx_mcxx_asst(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
 ? ? ? ? ? ? ? ?| ((pxa2xx_mcxx_hold(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
+ ? ? ? __raw_writel(val, MCMEM(sock));
+
 ? ? ? ?return 0;
 ?}
 
 ?static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
 ?{
- ? ? ? MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ ? ? ? uint32_t val;
+
+ ? ? ? val = ((pxa2xx_mcxx_setup(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
 ? ? ? ? ? ? ? ?| ((pxa2xx_mcxx_asst(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
 ? ? ? ? ? ? ? ?| ((pxa2xx_mcxx_hold(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
+ ? ? ? __raw_writel(val, MCIO(sock));
+
 ? ? ? ?return 0;
 ?}
 
 ?static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
 ?{
- ? ? ? MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ ? ? ? uint32_t val;
+
+ ? ? ? val = ((pxa2xx_mcxx_setup(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
 ? ? ? ? ? ? ? ?| ((pxa2xx_mcxx_asst(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
 ? ? ? ? ? ? ? ?| ((pxa2xx_mcxx_hold(speed, clock)
 ? ? ? ? ? ? ? ?& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
+ ? ? ? __raw_writel(val, MCATT(sock));
+
 ? ? ? ?return 0;
 ?}
 
@@ -205,19 +218,18 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 ?static void pxa2xx_configure_sockets(struct device *dev)
 ?{
 ? ? ? ?struct pcmcia_low_level *ops = dev->platform_data;
-

? ? ? ?/*
? ? ? ? * We have at least one socket, so set MECR:CIT ? ? ? ? * (Card Is There)
? ? ? ? */
- ? ? ? MECR |= MECR_CIT;
+ ? ? ? uint32_t mecr = MECR_CIT;

Quoted 9 lines

? ? ? ?/* Set MECR:NOS (Number Of Sockets) */
? ? ? ?if ((ops->first + ops->nr) > 1 ||
? ? ? ? ? ?machine_is_viper() || machine_is_arcom_zeus())
- ? ? ? ? ? ? ? MECR |= MECR_NOS;
- ? ? ? else
- ? ? ? ? ? ? ? MECR &= ~MECR_NOS;
+ ? ? ? ? ? ? ? mecr |= MECR_NOS;
+
+ ? ? ? __raw_writel(mecr, MECR);

In original, it only wants MECR |= MECR_NOS. But now, it becomes MECR = MECR_NOS. The meaning is changed.

Quoted 65 lines

?}

?static const char *skt_names[] = {

drivers/pcmcia/pxa2xx_base.c +24 -14
@@ -272,14 +284,24 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
 ? ? ? ?struct soc_pcmcia_socket *skt;
 
 ? ? ? ?ops = (struct pcmcia_low_level *)dev->dev.platform_data;
- ? ? ? if (!ops)
- ? ? ? ? ? ? ? return -ENODEV;
+ ? ? ? if (!ops) {
+ ? ? ? ? ? ? ? ret = -ENODEV;
+ ? ? ? ? ? ? ? goto err0;
+ ? ? ? }
+
+ ? ? ? if (cpu_is_pxa320() && ops->nr > 1) {
+ ? ? ? ? ? ? ? dev_err(&dev->dev, "pxa320 supports only one pcmcia slot");
+ ? ? ? ? ? ? ? ret = -EINVAL;
+ ? ? ? ? ? ? ? goto err0;
+ ? ? ? }
 
 ? ? ? ?pxa2xx_drv_pcmcia_ops(ops);
 
 ? ? ? ?sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
- ? ? ? if (!sinfo)
- ? ? ? ? ? ? ? return -ENOMEM;
+ ? ? ? if (!sinfo) {
+ ? ? ? ? ? ? ? ret = -ENOMEM;
+ ? ? ? ? ? ? ? goto err0;
+ ? ? ? }
 
 ? ? ? ?sinfo->nskt = ops->nr;
 
@@ -295,18 +317,19 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
 
 ? ? ? ? ? ? ? ?ret = pxa2xx_drv_pcmcia_add_one(skt);
 ? ? ? ? ? ? ? ?if (ret)
- ? ? ? ? ? ? ? ? ? ? ? break;
+ ? ? ? ? ? ? ? ? ? ? ? goto err1;
 ? ? ? ?}
 
- ? ? ? if (ret) {
- ? ? ? ? ? ? ? while (--i >= 0)
- ? ? ? ? ? ? ? ? ? ? ? soc_pcmcia_remove_one(&sinfo->skt[i]);
- ? ? ? ? ? ? ? kfree(sinfo);
- ? ? ? } else {
- ? ? ? ? ? ? ? pxa2xx_configure_sockets(&dev->dev);
- ? ? ? ? ? ? ? dev_set_drvdata(&dev->dev, sinfo);
- ? ? ? }
+ ? ? ? pxa2xx_configure_sockets(&dev->dev);
+ ? ? ? dev_set_drvdata(&dev->dev, sinfo);
 
+ ? ? ? return 0;
+
+err1:
+ ? ? ? while (--i >= 0)
+ ? ? ? ? ? ? ? soc_pcmcia_remove_one(&sinfo->skt[i]);
+ ? ? ? kfree(sinfo);
+err0:
 ? ? ? ?return ret;
 ?}
 
--

1.7.1

#3 lore raw

PATCH 2/13 ARM: pxa: Access SMEMC via virtual addresses

Dne Ne 10. ??jna 2010 02:31:24 Haojian Zhuang napsal(a):

Quoted 11 lines · Marek Vasut
Quoted 10 lines

This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well.

Also, various places in the kernel had to be patched to use __raw_read/__raw_write.

---

[SNIP]

Quoted 13 lines
Quoted 13 lines
(quoted diff) +0 -0
@@ -205,19 +218,18 @@ pxa2xx_pcmcia_frequency_change(struct

soc_pcmcia_socket *skt, static void pxa2xx_configure_sockets(struct device *dev)

 {
       struct pcmcia_low_level *ops = dev->platform_data;
drivers/pcmcia/pxa2xx_base.c +1 -2
-
       /*
        * We have at least one socket, so set MECR:CIT
        * (Card Is There)
        */
-       MECR |= MECR_CIT;
+       uint32_t mecr = MECR_CIT;
Quoted 12 lines

drivers/pcmcia/pxa2xx_base.c pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, · line 232

Quoted 9 lines
       /* Set MECR:NOS (Number Of Sockets) */
       if ((ops->first + ops->nr) > 1 ||
           machine_is_viper() || machine_is_arcom_zeus())
drivers/pcmcia/pxa2xx_base.c +3 -3
-               MECR |= MECR_NOS;
-       else
-               MECR &= ~MECR_NOS;
+               mecr |= MECR_NOS;
+
+       __raw_writel(mecr, MECR);

In original, it only wants MECR |= MECR_NOS. But now, it becomes MECR = MECR_NOS. The meaning is changed.

The meaning is actually still the same, check the datasheet.

I admit the logic has changed a bit though.

Are you fine with having it this way ?

Cheers

Quoted 65 lines
Quoted 65 lines

}

static const char *skt_names[] = {

drivers/pcmcia/pxa2xx_base.c +23 -14
@@ -272,14 +284,24 @@ static int pxa2xx_drv_pcmcia_probe(struct
 platform_device *dev) struct soc_pcmcia_socket *skt;
 
       ops = (struct pcmcia_low_level *)dev->dev.platform_data;
-       if (!ops)
-               return -ENODEV;
+       if (!ops) {
+               ret = -ENODEV;
+               goto err0;
+       }
+
+       if (cpu_is_pxa320() && ops->nr > 1) {
+               dev_err(&dev->dev, "pxa320 supports only one pcmcia
 slot"); +               ret = -EINVAL;
+               goto err0;
+       }
 
       pxa2xx_drv_pcmcia_ops(ops);
 
       sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
-       if (!sinfo)
-               return -ENOMEM;
+       if (!sinfo) {
+               ret = -ENOMEM;
+               goto err0;
+       }
 
       sinfo->nskt = ops->nr;
@@ -295,18 +317,19 @@ static int pxa2xx_drv_pcmcia_probe(struct
 platform_device *dev)
 
               ret = pxa2xx_drv_pcmcia_add_one(skt);
               if (ret)
-                       break;
+                       goto err1;
       }
 
-       if (ret) {
-               while (--i >= 0)
-                       soc_pcmcia_remove_one(&sinfo->skt[i]);
-               kfree(sinfo);
-       } else {
-               pxa2xx_configure_sockets(&dev->dev);
-               dev_set_drvdata(&dev->dev, sinfo);
-       }
+       pxa2xx_configure_sockets(&dev->dev);
+       dev_set_drvdata(&dev->dev, sinfo);
 
+       return 0;
+
+err1:
+       while (--i >= 0)
+               soc_pcmcia_remove_one(&sinfo->skt[i]);
+       kfree(sinfo);
+err0:
       return ret;
 }
 
--

1.7.1

#4 lore raw

PATCH 3/13 ARM: pxa: Toradex Colibri PXA270 CF support

In reply to Marek Vasut

This driver also contains structures to eventually support PXA320. This is planned to be added in a later patch.

---
 arch/arm/mach-pxa/colibri-pxa270-evalboard.c |   18 ++
 drivers/pcmcia/Kconfig                       |    2 +-
 drivers/pcmcia/Makefile                      |    1 +
 drivers/pcmcia/pxa2xx_colibri.c              |  214 ++++++++++++++++++++++++++
 4 files changed, 234 insertions(+), 1 deletions(-)
 create mode 100644 drivers/pcmcia/pxa2xx_colibri.c
arch/arm/mach-pxa/colibri-pxa270-evalboard.c +18 -0
index 0f3b632..6177ff5 100644
@@ -51,6 +51,24 @@ static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
 	GPIO89_USBH1_PEN,
 	GPIO119_USBH2_PWR,
 	GPIO120_USBH2_PEN,
+
+	/* PCMCIA */
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+	GPIO104_PSKTSEL,
+	GPIO53_GPIO,	/* RESET */
+	GPIO83_GPIO,	/* BVD1 */
+	GPIO82_GPIO,	/* BVD2 */
+	GPIO1_GPIO,	/* READY */
+	GPIO84_GPIO,	/* DETECT */
+	GPIO107_GPIO,	/* PPEN */
 };
 
 /******************************************************************************
drivers/pcmcia/Kconfig +1 -1
index c80a7a6..e9acf03 100644
@@ -215,7 +215,7 @@ config PCMCIA_PXA2XX
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
-		    || MACH_VPAC270 || MACH_BALLOON3)
+		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI)
 	select PCMCIA_SOC_COMMON
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
drivers/pcmcia/Makefile +1 -0
index 8d9386a..2fee7ef 100644
@@ -70,6 +70,7 @@ pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
 pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
 
drivers/pcmcia/pxa2xx_colibri.c new file +214 -0

214 lines not on this page · raw message

Signature · 1 line
1.7.1
#5 lore raw

PATCH 4/13 ARM: pxa: Push Colibri evalboard MFP into module files

In reply to Marek Vasut

This change -- pushing the MFP configuration back into Module files -- is necessary because some evalboards can be used with multiple modules, where MFP differs from module to module. Therefore MFP isn't board-specific, but module-specific and the module should preconfigure itself for the board.

(And there is also the C preprocesor limitation and conflicting #define-s)

---
 arch/arm/mach-pxa/Kconfig                    |    8 +-
 arch/arm/mach-pxa/colibri-pxa270-evalboard.c |   61 ++++-----------
 arch/arm/mach-pxa/colibri-pxa270-income.c    |   47 -----------
 arch/arm/mach-pxa/colibri-pxa270.c           |   96 ++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa300.c           |   61 ++++++---------
 arch/arm/mach-pxa/colibri-pxa320.c           |  112 ++++++++++----------------
 arch/arm/mach-pxa/colibri-pxa3xx.c           |   49 -----------
 arch/arm/mach-pxa/include/mach/colibri.h     |    6 ++
 8 files changed, 188 insertions(+), 252 deletions(-)
arch/arm/mach-pxa/Kconfig +4 -4
index dd235ec..b44d613 100644
@@ -232,10 +232,6 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
-config MACH_COLIBRI_PXA270_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
-	depends on MACH_COLIBRI
-
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
 	depends on MACH_COLIBRI
@@ -253,6 +249,10 @@ config MACH_COLIBRI320
 	select PXA3xx
 	select CPU_PXA320
 
+config MACH_COLIBRI_PXA270_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support"
+	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
 config MACH_VPAC270
 	bool "Voipac PXA270"
 	select PXA27x
arch/arm/mach-pxa/colibri-pxa270-evalboard.c +15 -46

100 lines not on this page · raw message

arch/arm/mach-pxa/colibri-pxa270-income.c +0 -47

59 lines not on this page · raw message

arch/arm/mach-pxa/colibri-pxa270.c +96 -0

111 lines not on this page · raw message

arch/arm/mach-pxa/colibri-pxa300.c +24 -37

86 lines not on this page · raw message

arch/arm/mach-pxa/colibri-pxa320.c +43 -69

146 lines not on this page · raw message

arch/arm/mach-pxa/colibri-pxa3xx.c +0 -49

55 lines not on this page · raw message

arch/arm/mach-pxa/include/mach/colibri.h +6 -0
index 58dada1..63a948a 100644
@@ -59,5 +59,11 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 #define GPIO0_COLIBRI_PXA270_SD_DETECT	0
 #define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
+/* GPIO definitions for Colibri PXA300/310 */
+#define GPIO39_COLIBRI_PXA300_SD_DETECT	39
+
+/* GPIO definitions for Colibri PXA320 */
+#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
+
 #endif /* _COLIBRI_H_ */
 
Signature · 1 line
1.7.1
#6 lore raw

PATCH 5/13 ARM: pxa: Add M41T00 RTC support into Colibri evalboard

In reply to Marek Vasut
---
 arch/arm/mach-pxa/colibri-pxa270-evalboard.c |   23 +++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa270.c           |    4 ++++
 arch/arm/mach-pxa/colibri-pxa300.c           |    4 ++++
 arch/arm/mach-pxa/colibri-pxa320.c           |    4 ++++
 4 files changed, 35 insertions(+), 0 deletions(-)
arch/arm/mach-pxa/colibri-pxa270-evalboard.c +23 -0
index e1a2b52..7f27aec 100644
@@ -19,6 +19,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
+#include <linux/i2c.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
@@ -26,6 +27,8 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 
+#include <plat/i2c.h>
+
 #include "generic.h"
 #include "devices.h"
 
@@ -87,6 +90,25 @@ static void __init colibri_pxa270_uhc_init(void)
 static inline void colibri_pxa270_uhc_init(void) {}
 #endif
 
+/******************************************************************************
+ * I2C RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata colibri_pxa270_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("m41t00", 0x68),
+	},
+};
+
+static void __init colibri_pxa270_rtc_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_pxa270_i2c_devs));
+}
+#else
+static inline void colibri_pxa270_rtc_init(void) {}
+#endif
+
 void __init colibri_pxa270_evalboard_init(void)
 {
 	pxa_set_ffuart_info(NULL);
@@ -95,4 +117,5 @@ void __init colibri_pxa270_evalboard_init(void)
 
 	colibri_pxa270_mmc_init();
 	colibri_pxa270_uhc_init();
+	colibri_pxa270_rtc_init();
 }
arch/arm/mach-pxa/colibri-pxa270.c +4 -0
index f2b740d..bab2545 100644
@@ -73,6 +73,10 @@ static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
 	GPIO1_GPIO,	/* READY */
 	GPIO84_GPIO,	/* DETECT */
 	GPIO107_GPIO,	/* PPEN */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
 };
 #else
 static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
arch/arm/mach-pxa/colibri-pxa300.c +4 -0
index 17cfe2f..bd9da55 100644
@@ -46,6 +46,10 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
 	/* UHC */
 	GPIO0_2_USBH_PEN,
 	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 #else
 static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
arch/arm/mach-pxa/colibri-pxa320.c +4 -0
index 9d8178c..1c64e00 100644
@@ -69,6 +69,10 @@ static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
 	/* UHC */
 	GPIO2_2_USBH_PEN,
 	GPIO3_2_USBH_PWR,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
 };
 #else
 static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
Signature · 1 line
1.7.1
#7 lore raw

PATCH 6/13 ARM: pxa: Rename Colibri evalboard

In reply to Marek Vasut

Rename colibri-pxa270-evalboard to colibri-evalboard as this board is used with all Colibri modules.

---
 arch/arm/mach-pxa/Kconfig                    |    2 +-
 arch/arm/mach-pxa/Makefile                   |    2 +-
 arch/arm/mach-pxa/colibri-evalboard.c        |  121 ++++++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa270-evalboard.c |  121 --------------------------
 arch/arm/mach-pxa/colibri-pxa270.c           |    6 +-
 arch/arm/mach-pxa/colibri-pxa300.c           |    4 +-
 arch/arm/mach-pxa/colibri-pxa320.c           |    4 +-
 arch/arm/mach-pxa/include/mach/colibri.h     |    8 +-
 8 files changed, 134 insertions(+), 134 deletions(-)
 create mode 100644 arch/arm/mach-pxa/colibri-evalboard.c
 delete mode 100644 arch/arm/mach-pxa/colibri-pxa270-evalboard.c
arch/arm/mach-pxa/Kconfig +1 -1
index b44d613..e0ac5aa 100644
@@ -249,7 +249,7 @@ config MACH_COLIBRI320
 	select PXA3xx
 	select CPU_PXA320
 
-config MACH_COLIBRI_PXA270_EVALBOARD
+config MACH_COLIBRI_EVALBOARD
 	bool "Toradex Colibri Evaluation Carrier Board support"
 	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 
arch/arm/mach-pxa/Makefile +1 -1
index e2f89c2..3197756 100644
@@ -60,7 +60,7 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
 obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
arch/arm/mach-pxa/colibri-evalboard.c new file +121 -0

121 lines not on this page · raw message

arch/arm/mach-pxa/colibri-pxa270-evalboard.c deleted +0 -121

121 lines not on this page · raw message

arch/arm/mach-pxa/colibri-pxa270.c +3 -3
index bab2545..7edd963 100644
@@ -35,7 +35,7 @@
 /******************************************************************************
  * Evaluation board MFP
  ******************************************************************************/
-#ifdef	 CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
 static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -281,10 +281,10 @@ static void __init colibri_pxa270_init(void)
 	colibri_pxa270_tsc_init();
 
 	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_PXA270_EVALBOARD:
+	case COLIBRI_EVALBOARD:
 		pxa2xx_mfp_config(ARRAY_AND_SIZE(
 			colibri_pxa270_evalboard_pin_config));
-		colibri_pxa270_evalboard_init();
+		colibri_evalboard_init();
 		break;
 	case COLIBRI_PXA270_INCOME:
 		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
arch/arm/mach-pxa/colibri-pxa300.c +2 -2
index bd9da55..39c5c39 100644
@@ -32,7 +32,7 @@
 #include "devices.h"
 
 
-#ifdef CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
 static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
 	/* MMC */
 	GPIO7_MMC1_CLK,
@@ -173,7 +173,7 @@ void __init colibri_pxa300_init(void)
 
 	/* Evalboard init */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
-	colibri_pxa270_evalboard_init();
+	colibri_evalboard_init();
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
arch/arm/mach-pxa/colibri-pxa320.c +2 -2
index 1c64e00..07f32c6 100644
@@ -35,7 +35,7 @@
 #include "generic.h"
 #include "devices.h"
 
-#ifdef	CONFIG_MACH_COLIBRI_PXA270_EVALBOARD
+#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
 static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
 	/* MMC */
 	GPIO22_MMC1_CLK,
@@ -229,7 +229,7 @@ void __init colibri_pxa320_init(void)
 
 	/* Evalboard init */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
-	colibri_pxa270_evalboard_init();
+	colibri_evalboard_init();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
arch/arm/mach-pxa/include/mach/colibri.h +4 -4
index 63a948a..388a96f 100644
@@ -9,14 +9,14 @@
  */
 
 enum {
-	COLIBRI_PXA270_EVALBOARD = 0,
+	COLIBRI_EVALBOARD = 0,
 	COLIBRI_PXA270_INCOME,
 };
 
-#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
-extern void colibri_pxa270_evalboard_init(void);
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
 #else
-static inline void colibri_pxa270_evalboard_init(void) {}
+static inline void colibri_evalboard_init(void) {}
 #endif
 
 #if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
Signature · 1 line
1.7.1
#8 lore raw

PATCH 7/13 ARM: pxa: Colibri PXA320 PCMCIA driver

In reply to Marek Vasut
---
 arch/arm/mach-pxa/colibri-pxa320.c |   21 +++++++++++++++++++++
 drivers/pcmcia/Kconfig             |    3 ++-
 drivers/pcmcia/Makefile            |    1 +
 drivers/pcmcia/pxa2xx_colibri.c    |   17 ++++++++++++++++-
 4 files changed, 40 insertions(+), 2 deletions(-)
arch/arm/mach-pxa/colibri-pxa320.c +21 -0
index 07f32c6..4c8945d 100644
@@ -73,6 +73,27 @@ static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
 	/* I2C */
 	GPIO32_I2C_SCL,
 	GPIO33_I2C_SDA,
+
+	/* PCMCIA */
+	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
+	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
+	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
+	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
+	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
+	GPIO27_GPIO,		/* RDnWR ; input/tristate */
+	GPIO50_GPIO,		/* PREG ; input/tristate */
+	GPIO2_RDY,
+	GPIO5_NPIOR,
+	GPIO6_NPIOW,
+	GPIO7_NPIOS16,
+	GPIO8_NPWAIT,
+	GPIO29_GPIO,		/* PRDY (READY GPIO) */
+	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
+	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
+	GPIO77_GPIO,		/* PRST (RESET GPIO) */
+	GPIO53_GPIO,		/* PBVD1 */
+	GPIO79_GPIO,		/* PBVD2 */
+	GPIO54_GPIO,		/* POE */
 };
 #else
 static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
drivers/pcmcia/Kconfig +2 -1
index e9acf03..de886f3 100644
@@ -215,7 +215,8 @@ config PCMCIA_PXA2XX
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
-		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI)
+		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
+		    || MACH_COLIBRI320)
 	select PCMCIA_SOC_COMMON
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
drivers/pcmcia/Makefile +1 -0
index 2fee7ef..9a44a90 100644
@@ -71,6 +71,7 @@ pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
 pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
 pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI320)		+= pxa2xx_colibri.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
 
drivers/pcmcia/pxa2xx_colibri.c +16 -1
index 4ed876c..c3f7219 100644
@@ -27,6 +27,13 @@
 #define	COLIBRI270_DETECT_GPIO	84
 #define	COLIBRI270_READY_GPIO	1
 
+#define	COLIBRI320_RESET_GPIO	77
+#define	COLIBRI320_PPEN_GPIO	57
+#define	COLIBRI320_BVD1_GPIO	53
+#define	COLIBRI320_BVD2_GPIO	79
+#define	COLIBRI320_DETECT_GPIO	81
+#define	COLIBRI320_READY_GPIO	29
+
 static struct {
 	int	reset_gpio;
 	int	ppen_gpio;
@@ -186,6 +193,14 @@ static int __init colibri_pcmcia_init(void)
 		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI270_BVD2_GPIO;
 		colibri_pcmcia_gpio.detect_gpio	= COLIBRI270_DETECT_GPIO;
 		colibri_pcmcia_gpio.ready_gpio	= COLIBRI270_READY_GPIO;
+	/* Colibri PXA320 */
+	} else if (machine_is_colibri320()) {
+		colibri_pcmcia_gpio.reset_gpio	= COLIBRI320_RESET_GPIO;
+		colibri_pcmcia_gpio.ppen_gpio	= COLIBRI320_PPEN_GPIO;
+		colibri_pcmcia_gpio.bvd1_gpio	= COLIBRI320_BVD1_GPIO;
+		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI320_BVD2_GPIO;
+		colibri_pcmcia_gpio.detect_gpio	= COLIBRI320_DETECT_GPIO;
+		colibri_pcmcia_gpio.ready_gpio	= COLIBRI320_READY_GPIO;
 	}
 
 	ret = platform_device_add_data(colibri_pcmcia_device,
@@ -209,6 +224,6 @@ module_init(colibri_pcmcia_init);
 module_exit(colibri_pcmcia_exit);
 
 MODULE_AUTHOR("Marek Vasut <[email protected]>");
-MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270");
+MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
 MODULE_ALIAS("platform:pxa2xx-pcmcia");
 MODULE_LICENSE("GPL");
Signature · 1 line
1.7.1
#9 lore raw

PATCH 8/13 ARM: pxa: Modularize Palm Tungsten|C

In reply to Marek Vasut
---
 arch/arm/mach-pxa/palmtc.c |  147 ++++++++++++++++++++++++++++++++++---------
 1 files changed, 116 insertions(+), 31 deletions(-)
arch/arm/mach-pxa/palmtc.c +116 -31
index b64ed70..2576e63 100644
@@ -25,6 +25,7 @@
 #include <linux/power_supply.h>
 #include <linux/gpio_keys.h>
 #include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -116,6 +117,7 @@ static unsigned long palmtc_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data palmtc_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
@@ -124,9 +126,18 @@ static struct pxamci_platform_data palmtc_mci_platform_data = {
 	.detect_delay_ms	= 200,
 };
 
+static void __init palmtc_mmc_init(void)
+{
+	pxa_set_mci_info(&palmtc_mci_platform_data);
+}
+#else
+static inline void palmtc_mmc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmtc_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
 };
@@ -144,9 +155,18 @@ static struct platform_device palmtc_pxa_keys = {
 	},
 };
 
+static void __init palmtc_keys_init(void)
+{
+	platform_device_register(&palmtc_pxa_keys);
+}
+#else
+static inline void palmtc_keys_init(void) {}
+#endif
+
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
 static int palmtc_backlight_init(struct device *dev)
 {
 	int ret;
@@ -196,17 +216,35 @@ static struct platform_device palmtc_backlight = {
 	},
 };
 
+static void __init palmtc_pwm_init(void)
+{
+	platform_device_register(&palmtc_backlight);
+}
+#else
+static inline void palmtc_pwm_init(void) {}
+#endif
+
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
 static struct pxaficp_platform_data palmtc_ficp_platform_data = {
 	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
+static void __init palmtc_irda_init(void)
+{
+	pxa_set_ficp_info(&palmtc_ficp_platform_data);
+}
+#else
+static inline void palmtc_irda_init(void) {}
+#endif
+
 /******************************************************************************
  * Keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 static const uint32_t palmtc_matrix_keys[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(0, 1, KEY_X),
@@ -290,27 +328,63 @@ static struct platform_device palmtc_keyboard = {
 		.platform_data = &palmtc_keypad_platform_data,
 	},
 };
+static void __init palmtc_mkp_init(void)
+{
+	platform_device_register(&palmtc_keyboard);
+}
+#else
+static inline void palmtc_mkp_init(void) {}
+#endif
 
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
 };
 
+static struct platform_device palmtc_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtc_udc_info,
+	},
+};
+
+static void __init palmtc_udc_init(void)
+{
+	platform_device_register(&palmtc_gpio_vbus);
+};
+#else
+static inline void palmtc_udc_init(void) {}
+#endif
+
 /******************************************************************************
  * Touchscreen / Battery / GPIO-extender
  ******************************************************************************/
-static struct platform_device palmtc_ucb1400_core = {
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device palmtc_ucb1400_device = {
 	.name	= "ucb1400_core",
 	.id	= -1,
 };
 
+static void __init palmtc_ts_init(void)
+{
+	pxa_set_ac97_info(NULL);
+	platform_device_register(&palmtc_ucb1400_device);
+}
+#else
+static inline void palmtc_ts_init(void) {}
+#endif
+
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct resource palmtc_flash_resource = {
 	.start	= PXA_CS0_PHYS,
 	.end	= PXA_CS0_PHYS + SZ_16M - 1,
@@ -356,24 +430,33 @@ static struct platform_device palmtc_flash = {
 	},
 };
 
+static void __init palmtc_nor_init(void)
+{
+	platform_device_register(&palmtc_flash);
+}
+#else
+static inline void palmtc_nor_init(void) {}
+#endif
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info palmtc_lcd_modes[] = {
-{
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-},
+	{
+		.pixclock	= 115384,
+		.xres		= 320,
+		.yres		= 320,
+		.bpp		= 16,
+
+		.left_margin	= 27,
+		.right_margin	= 7,
+		.upper_margin	= 7,
+		.lower_margin	= 8,
+
+		.hsync_len	= 6,
+		.vsync_len	= 1,
+	},
 };
 
 static struct pxafb_mach_info palmtc_lcd_screen = {
@@ -382,17 +465,17 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+static void __init palmtc_lcd_init(void)
+{
+	set_pxa_fb_info(&palmtc_lcd_screen);
+}
+#else
+static inline void palmtc_lcd_init(void) {}
+#endif
+
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&palmtc_backlight,
-	&palmtc_ucb1400_core,
-	&palmtc_keyboard,
-	&palmtc_pxa_keys,
-	&palmtc_flash,
-};
-
 static void __init palmtc_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
@@ -402,13 +485,15 @@ static void __init palmtc_init(void)
 	pxa_set_stuart_info(NULL);
 	pxa_set_hwuart_info(NULL);
 
-	set_pxa_fb_info(&palmtc_lcd_screen);
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-	pxa_set_udc_info(&palmtc_udc_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palmtc_mmc_init();
+	palmtc_keys_init();
+	palmtc_pwm_init();
+	palmtc_irda_init();
+	palmtc_mkp_init();
+	palmtc_udc_init();
+	palmtc_ts_init();
+	palmtc_nor_init();
+	palmtc_lcd_init();
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
Signature · 1 line
1.7.1
#10 lore raw

PATCH 9/13 UCB1400: Pass ucb1400-gpio data through ac97 bus

In reply to Marek Vasut
---
 drivers/gpio/ucb1400_gpio.c |   19 ++++++-------------
 drivers/mfd/ucb1400_core.c  |    5 +++++
 include/linux/ucb1400.h     |   19 ++++++-------------
 3 files changed, 17 insertions(+), 26 deletions(-)
drivers/gpio/ucb1400_gpio.c +6 -13
index 50e6bd1..fba45a5 100644
@@ -12,8 +12,6 @@
 #include <linux/module.h>
 #include <linux/ucb1400.h>
 
-struct ucb1400_gpio_data *ucbdata;
-
 static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
 {
 	struct ucb1400_gpio *gpio;
@@ -50,7 +48,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	struct ucb1400_gpio *ucb = dev->dev.platform_data;
 	int err = 0;
 
-	if (!(ucbdata && ucbdata->gpio_offset)) {
+	if (!(ucb && ucb->gpio_offset)) {
 		err = -EINVAL;
 		goto err;
 	}
@@ -58,7 +56,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, ucb);
 
 	ucb->gc.label = "ucb1400_gpio";
-	ucb->gc.base = ucbdata->gpio_offset;
+	ucb->gc.base = ucb->gpio_offset;
 	ucb->gc.ngpio = 10;
 	ucb->gc.owner = THIS_MODULE;
 
@@ -72,8 +70,8 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
 	if (err)
 		goto err;
 
-	if (ucbdata && ucbdata->gpio_setup)
-		err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
+	if (ucb && ucb->gpio_setup)
+		err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
 
 err:
 	return err;
@@ -85,8 +83,8 @@ static int ucb1400_gpio_remove(struct platform_device *dev)
 	int err = 0;
 	struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
 
-	if (ucbdata && ucbdata->gpio_teardown) {
-		err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+	if (ucb && ucb->gpio_teardown) {
+		err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
 		if (err)
 			return err;
 	}
@@ -113,11 +111,6 @@ static void __exit ucb1400_gpio_exit(void)
 	platform_driver_unregister(&ucb1400_gpio_driver);
 }
 
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
-{
-	ucbdata = data;
-}
-
 module_init(ucb1400_gpio_init);
 module_exit(ucb1400_gpio_exit);
 
drivers/mfd/ucb1400_core.c +5 -0
index d73f84b..63f4969 100644
@@ -75,6 +75,11 @@ static int ucb1400_core_probe(struct device *dev)
 
 	/* GPIO */
 	ucb_gpio.ac97 = ac97;
+	if (pdata) {
+		ucb_gpio.gpio_setup = pdata->gpio_setup;
+		ucb_gpio.gpio_teardown = pdata->gpio_teardown;
+		ucb_gpio.gpio_offset = pdata->gpio_offset;
+	}
 	ucb->ucb1400_gpio = platform_device_alloc("ucb1400_gpio", -1);
 	if (!ucb->ucb1400_gpio) {
 		err = -ENOMEM;
include/linux/ucb1400.h +6 -13
index 1b47909..1a6bfdd 100644
@@ -83,15 +83,12 @@
 #define UCB_ID			0x7e
 #define UCB_ID_1400             0x4304
 
-struct ucb1400_gpio_data {
-	int gpio_offset;
-	int (*gpio_setup)(struct device *dev, int ngpio);
-	int (*gpio_teardown)(struct device *dev, int ngpio);
-};
-
 struct ucb1400_gpio {
 	struct gpio_chip	gc;
 	struct snd_ac97		*ac97;
+	int			gpio_offset;
+	int (*gpio_setup)(struct device *dev, int ngpio);
+	int (*gpio_teardown)(struct device *dev, int ngpio);
 };
 
 struct ucb1400_ts {
@@ -112,6 +109,9 @@ struct ucb1400 {
 
 struct ucb1400_pdata {
 	int	irq;
+	int	gpio_offset;
+	int (*gpio_setup)(struct device *dev, int ngpio);
+	int (*gpio_teardown)(struct device *dev, int ngpio);
 };
 
 static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
@@ -163,11 +163,4 @@ static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
 
 unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
 			      int adcsync);
-
-#ifdef CONFIG_GPIO_UCB1400
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
-#else
-static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {}
-#endif
-
 #endif
Signature · 1 line
1.7.1
#11 lore raw

PATCH 10/13 ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270

In reply to Marek Vasut
---
 arch/arm/mach-pxa/vpac270.c |   12 +++++-------
 1 files changed, 5 insertions(+), 7 deletions(-)
arch/arm/mach-pxa/vpac270.c +5 -7
index 07c35eb..6278578 100644
@@ -430,20 +430,18 @@ static inline void vpac270_eth_init(void) {}
  ******************************************************************************/
 #if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
 	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
 	.irq		= IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
 };
 
+static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
+	.reset_gpio	= 95,
+	.codec_pdata	= { &vpac270_ucb1400_pdata, },
+};
+
 static struct platform_device vpac270_ucb1400_device = {
 	.name		= "ucb1400_core",
 	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
 };
 
 static void __init vpac270_ts_init(void)
Signature · 1 line
1.7.1
#12 lore raw

PATCH 11/13 ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC

In reply to Marek Vasut
---
 arch/arm/mach-pxa/palmtc.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)
arch/arm/mach-pxa/palmtc.c +9 -1
index 2576e63..8fbd8e0 100644
@@ -367,6 +367,14 @@ static inline void palmtc_udc_init(void) {}
  ******************************************************************************/
 #if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
 	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct ucb1400_pdata palmtc_ucb1400_pdata = {
+	.gpio_offset	= PALMTC_UCB1400_GPIO_OFFSET,
+};
+
+static pxa2xx_audio_ops_t palmtc_ac97_pdata = {
+	.codec_pdata	= { &palmtc_ucb1400_pdata, },
+};
+
 static struct platform_device palmtc_ucb1400_device = {
 	.name	= "ucb1400_core",
 	.id	= -1,
@@ -374,7 +382,7 @@ static struct platform_device palmtc_ucb1400_device = {
 
 static void __init palmtc_ts_init(void)
 {
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmtc_ac97_pdata);
 	platform_device_register(&palmtc_ucb1400_device);
 }
 #else
Signature · 1 line
1.7.1
#13 lore raw

PATCH 12/13 ARM: pxa: Add gpio-leds and vibrator support to PalmTC

In reply to Marek Vasut
---
 arch/arm/mach-pxa/palmtc.c |   41 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 41 insertions(+), 0 deletions(-)
arch/arm/mach-pxa/palmtc.c +41 -0
index 8fbd8e0..c299a97 100644
@@ -390,6 +390,46 @@ static inline void palmtc_ts_init(void) {}
 #endif
 
 /******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led palmtc_gpio_leds[] = {
+{
+	.name			= "palmtc:green:user",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMTC_LED_POWER,
+	.active_low		= 1,
+}, {
+	.name			= "palmtc:vibra:vibra",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
+	.active_low		= 1,
+}
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+	.leds		= palmtc_gpio_leds,
+	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtc_gpio_led_info,
+	}
+};
+
+static void __init palmtc_leds_init(void)
+{
+	platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
+/******************************************************************************
  * NOR Flash
  ******************************************************************************/
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
@@ -502,6 +542,7 @@ static void __init palmtc_init(void)
 	palmtc_ts_init();
 	palmtc_nor_init();
 	palmtc_lcd_init();
+	palmtc_leds_init();
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
Signature · 1 line
1.7.1
maintainer
#14 lore raw

PATCH 12/13 ARM: pxa: Add gpio-leds and vibrator support to PalmTC

Quoted 18 lines · Marek Vasut

---
?arch/arm/mach-pxa/palmtc.c | ? 41 +++++++++++++++++++++++++++++++++++++++++ ?1 files changed, 41 insertions(+), 0 deletions(-)

arch/arm/mach-pxa/palmtc.c +0 -0
index 8fbd8e0..c299a97 100644
@@ -390,6 +390,46 @@ static inline void palmtc_ts_init(void) {}

?#endif

?/******************************************************************************
+ * LEDs
+ ******************************************************************************/

arch/arm/mach-pxa/palmtc.c +3 -0
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led palmtc_gpio_leds[] = {
+{

arch/arm/mach-pxa/palmtc.c

Quoted 10 lines
arch/arm/mach-pxa/palmtc.c +10 -0
+ ? ? ? .name ? ? ? ? ? ? ? ? ? = "palmtc:green:user",
+ ? ? ? .default_trigger ? ? ? ?= "none",
+ ? ? ? .gpio ? ? ? ? ? ? ? ? ? = GPIO_NR_PALMTC_LED_POWER,
+ ? ? ? .active_low ? ? ? ? ? ? = 1,
+}, {
+ ? ? ? .name ? ? ? ? ? ? ? ? ? = "palmtc:vibra:vibra",
+ ? ? ? .default_trigger ? ? ? ?= "none",
+ ? ? ? .gpio ? ? ? ? ? ? ? ? ? = GPIO_NR_PALMTC_VIBRA_POWER,
+ ? ? ? .active_low ? ? ? ? ? ? = 1,
+}

Do you need to use a tab before contents in structure?

Quoted 40 lines
arch/arm/mach-pxa/palmtc.c +25 -0
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+ ? ? ? .leds ? ? ? ? ? = palmtc_gpio_leds,
+ ? ? ? .num_leds ? ? ? = ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+ ? ? ? .name ? = "leds-gpio",
+ ? ? ? .id ? ? = -1,
+ ? ? ? .dev ? ?= {
+ ? ? ? ? ? ? ? .platform_data ?= &palmtc_gpio_led_info,
+ ? ? ? }
+};
+
+static void __init palmtc_leds_init(void)
+{
+ ? ? ? platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
+/******************************************************************************

?* NOR Flash ?******************************************************************************/ ?#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)

arch/arm/mach-pxa/palmtc.c +1 -1
@@ -502,6 +542,7 @@ static void __init palmtc_init(void)
 ? ? ? ?palmtc_ts_init();
 ? ? ? ?palmtc_nor_init();
 ? ? ? ?palmtc_lcd_init();
+ ? ? ? palmtc_leds_init();
 ?};
 
 ?MACHINE_START(PALMTC, "Palm Tungsten|C")
--

1.7.1

#15 lore raw

PATCH 12/13 ARM: pxa: Add gpio-leds and vibrator support to PalmTC

Dne Ne 10. ??jna 2010 02:34:48 Haojian Zhuang napsal(a):

Quoted 25 lines · Marek Vasut
Quoted 24 lines
---
 arch/arm/mach-pxa/palmtc.c |   41

+++++++++++++++++++++++++++++++++++++++++ 1 files changed, 41 insertions(+), 0 deletions(-)

arch/arm/mach-pxa/palmtc.c +1 -0
index 8fbd8e0..c299a97 100644
@@ -390,6 +390,46 @@ static inline void palmtc_ts_init(void) {}
 #endif
 
 /***********************************************************************
 ******* + * LEDs
+
 ************************************************************************
 ******/ +#if defined(CONFIG_LEDS_GPIO) ||

defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led palmtc_gpio_leds[] = {

arch/arm/mach-pxa/palmtc.c +5 -0
+{
+       .name                   = "palmtc:green:user",
+       .default_trigger        = "none",
+       .gpio                   = GPIO_NR_PALMTC_LED_POWER,
+       .active_low             = 1,
Quoted 8 lines

arch/arm/mach-pxa/palmtc.c static inline void palmtc_ts_init(void) {} · line 407

Quoted 6 lines
arch/arm/mach-pxa/palmtc.c +6 -0
+}, {
+       .name                   = "palmtc:vibra:vibra",
+       .default_trigger        = "none",
+       .gpio                   = GPIO_NR_PALMTC_VIBRA_POWER,
+       .active_low             = 1,
+}

Do you need to use a tab before contents in structure?

I dunno if checkpatch warns about it, but I'm used to it and it looks better.

Quoted 40 lines
Quoted 40 lines
arch/arm/mach-pxa/palmtc.c +25 -0
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+       .leds           = palmtc_gpio_leds,
+       .num_leds       = ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+       .name   = "leds-gpio",
+       .id     = -1,
+       .dev    = {
+               .platform_data  = &palmtc_gpio_led_info,
+       }
+};
+
+static void __init palmtc_leds_init(void)
+{
+       platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
+/***********************************************************************

******* * NOR Flash
************************************************************************
******/ #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) @@ -502,6 +542,7 @@ static void __init palmtc_init(void)

       palmtc_ts_init();
       palmtc_nor_init();
       palmtc_lcd_init();

+ palmtc_leds_init();
};

MACHINE_START(PALMTC, "Palm Tungsten|C")
--
1.7.1

#16 lore raw

PATCH 13/13 ARM: pxa: Fix pxa2xx-flash section mismatch

In reply to Marek Vasut
---
 drivers/mtd/maps/pxa2xx-flash.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/mtd/maps/pxa2xx-flash.c +1 -1
index dd90880..d8ae634 100644
@@ -51,7 +51,7 @@ struct pxa2xx_flash_info {
 static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
 {
 	struct flash_platform_data *flash = pdev->dev.platform_data;
 	struct pxa2xx_flash_info *info;
Signature · 1 line
1.7.1
maintainer
#17 lore raw

PATCH 13/13 ARM: pxa: Fix pxa2xx-flash section mismatch

Quoted 19 lines · Marek Vasut

---
?drivers/mtd/maps/pxa2xx-flash.c | ? ?2 +-
?1 files changed, 1 insertions(+), 1 deletions(-)

drivers/mtd/maps/pxa2xx-flash.c +1 -2
index dd90880..d8ae634 100644
@@ -51,7 +51,7 @@ struct pxa2xx_flash_info {
 ?static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
 ?{
 ? ? ? ?struct flash_platform_data *flash = pdev->dev.platform_data;
 ? ? ? ?struct pxa2xx_flash_info *info;
--
Quoted 3 lines

1.7.1

Acked.

#18 lore raw

PATCH 13/13 ARM: pxa: Fix pxa2xx-flash section mismatch

Dne Ne 10. ??jna 2010 02:32:42 Haojian Zhuang napsal(a):

Quoted 14 lines · Marek Vasut
Quoted 13 lines
---
 drivers/mtd/maps/pxa2xx-flash.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
(quoted diff) +0 -0

b/drivers/mtd/maps/pxa2xx-flash.c index dd90880..d8ae634 100644

drivers/mtd/maps/pxa2xx-flash.c +0 -0
@@ -51,7 +51,7 @@ struct pxa2xx_flash_info {
 static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 
Quoted 9 lines
Quoted 7 lines
drivers/mtd/maps/pxa2xx-flash.c +1 -2
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
 {
       struct flash_platform_data *flash = pdev->dev.platform_data;
       struct pxa2xx_flash_info *info;
--

1.7.1

Acked.

Can you please send me a formal acked-by line for the patches you acked ? Thanks and sorry for the bugging :)

#19 lore raw

PATCH 1/13 ARM: pxa: Introduce pxa[23]xx_map_io

In reply to Marek Vasut

Hi Marek,

Quoted 29 lines · Marek Vasut

This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA2xx and PXA3xx memory mapping.

Also, fixup for platforms broken after introducing pxa2xx_map_io() and pxa3xx_map_io() is included.

---

arch/arm/mach-pxa/spitz.c +2 -0
index 1cd99cb..3fa9c02 100644
@@ -27,6 +27,7 @@
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
+#include <linux/io.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -44,6 +45,7 @@
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl_pm.h>
+#include <mach/pxa-smemc.h>
 
 #include <plat/i2c.h>
 

arch/arm/mach-pxa/spitz.c static void spitz_poweroff(void) · line 936

Quoted 7 lines
arch/arm/mach-pxa/spitz.c +2 -2
@@ -930,8 +932,8 @@ static void spitz_poweroff(void)
 static void spitz_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
-	if ((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if ((__raw_readl(MSC0) & 0xffff0000) == 0x7ff00000)
+		__raw_writel((__raw_readl(MSC0) & 0xffff) | 0x7ee00000, MSC0);

I believe, this is not related to the subject...

Signature · 2 lines
Regards,
Igor.
#20 lore raw

PATCH 1/13 ARM: pxa: Introduce pxa[23]xx_map_io

Dne Ne 10. ??jna 2010 09:38:29 Igor Grinberg napsal(a):

Quoted 41 lines

Hi Marek,

Quoted 38 lines · Marek Vasut

This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA2xx and PXA3xx memory mapping.

Also, fixup for platforms broken after introducing pxa2xx_map_io() and pxa3xx_map_io() is included.

---

arch/arm/mach-pxa/spitz.c +1 -0
index 1cd99cb..3fa9c02 100644
@@ -27,6 +27,7 @@
 
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
 
+#include <linux/io.h>
 

#include <asm/setup.h>
#include <asm/mach-types.h>

arch/arm/mach-pxa/spitz.c +1 -0
@@ -44,6 +45,7 @@
 
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl_pm.h>
 
+#include <mach/pxa-smemc.h>
 

#include <plat/i2c.h>

arch/arm/mach-pxa/spitz.c +0 -0
@@ -930,8 +932,8 @@ static void spitz_poweroff(void)
 
 static void spitz_restart(char mode, const char *cmd)
 {
 
Quoted 8 lines

arch/arm/mach-pxa/spitz.c static void spitz_poweroff(void) · line 936

Quoted 6 lines
arch/arm/mach-pxa/spitz.c +2 -2
 	/* Bootloader magic for a reboot */
 
-	if ((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if ((__raw_readl(MSC0) & 0xffff0000) == 0x7ff00000)
+		__raw_writel((__raw_readl(MSC0) & 0xffff) | 0x7ee00000, MSC0);

I believe, this is not related to the subject...

Thanks a lot, I got this fixed in my tree, will send a v2.