Ability to set reference clock as module parameter
PATCH v2 1/1 Ability to set reference clock as module parameter
v2 Cleaned changes from development
Option to set reference clock as module param, debugfs readonly permanent MAC address
Signed-off-by Gery Kahn <[email protected]>
--- arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +- drivers/net/wireless/wl12xx/wl1271.h | 3 ++- drivers/net/wireless/wl12xx/wl1271_debugfs.c | 5 ++++- drivers/net/wireless/wl12xx/wl1271_main.c | 3 +++ drivers/net/wireless/wl12xx/wl1271_sdio.c | 9 ++++++++- 5 files changed, 18 insertions(+), 4 deletions(-)
arch/arm/mach-omap2/board-zoom-peripherals.c +1 -1
@@ -190,7 +190,7 @@ static struct platform_device omap_vwlan_device = {struct wl12xx_platform_data omap_zoom_wlan_data__initdata = { .irq =OMAP_GPIO_IRQ (OMAP_ZOOM_WLAN_IRQ_GPIO ),/* ZOOM ref clock is 26 MHz */ - .board_ref_clock =1 , + .board_ref_clock =WL12XX_REFCLOCK_26 , };static struct omap2_hsmmc_info mmc[]__initdata = {
drivers/net/wireless/wl12xx/wl1271.h +1 -0
@@ -273,6 +273,7 @@ struct wl1271_debugfs {struct dentry *retry_count;struct dentry *excessive_retries; +struct dentry *ref_clk;struct dentry *gpio_power; };
drivers/net/wireless/wl12xx/wl1271_debugfs.c +4 -1
@@ -35,7 +35,6 @@#define WL1271_DEBUGFS_STATS_LIFETIME 1000/* debugfs macros idea from mac80211 */ - #define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...) \ static ssize_t name## _read(struct file *file, char __user *userbuf, \ size_t count, loff_t *ppos) \
@@ -219,6 +218,8 @@ DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");DEBUGFS_READONLY_FILE (retry_count,20 ,"%u" , wl->stats.retry_count);DEBUGFS_READONLY_FILE (excessive_retries,20 ,"%u" , wl->stats.excessive_retries); +DEBUGFS_READONLY_FILE (ref_clk,3 ,"%d" , wl->ref_clock); +static ssize_t tx_queue_len_read (struct file *file,char __user *userbuf,size_t count,loff_t *ppos)
@@ -390,6 +391,7 @@ static void wl1271_debugfs_delete_files(struct wl1271 *wl)DEBUGFS_DEL (tx_queue_len);DEBUGFS_DEL (retry_count);DEBUGFS_DEL (excessive_retries); +DEBUGFS_DEL (ref_clk);DEBUGFS_DEL (gpio_power); }
@@ -492,6 +494,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl)DEBUGFS_ADD (tx_queue_len, wl->debugfs.rootdir);DEBUGFS_ADD (retry_count, wl->debugfs.rootdir);DEBUGFS_ADD (excessive_retries, wl->debugfs.rootdir); +DEBUGFS_ADD (ref_clk, wl->debugfs.rootdir);DEBUGFS_ADD (gpio_power, wl->debugfs.rootdir);
drivers/net/wireless/wl12xx/wl1271_main.c +3 -0
@@ -946,6 +946,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,memcpy (wl->mac_addr, vif->addr,ETH_ALEN ); +/* update MAC address in wiphy struct */ +memcpy (wiphy->perm_addr, vif->addr,ETH_ALEN ); +if (wl->state !=WL1271_STATE_OFF ) {wl1271_error ("cannot start because not in off state: %d" , wl->state);
drivers/net/wireless/wl12xx/wl1271_sdio.c +8 -1
@@ -44,6 +44,10 @@#define SDIO_DEVICE_ID_TI_WL1271 0x4076#endif +static int modparam_ref_clk; +module_param_named (ref_clk, modparam_ref_clk, int,0444 ); +MODULE_PARM_DESC (ref_clk,"Set reference clock" ); +static const struct sdio_device_id wl1271_devices[] = { {SDIO_DEVICE (SDIO_VENDOR_ID_TI ,SDIO_DEVICE_ID_TI_WL1271 ) }, {}
@@ -237,7 +241,10 @@ static int __devinit wl1271_probe(struct sdio_func *func, } wl->irq = wlan_data->irq; - wl->ref_clock = wlan_data->board_ref_clock; +if (modparam_ref_clk) + wl->ref_clock = modparam_ref_clk; +else + wl->ref_clock = wlan_data->board_ref_clock; ret =request_irq (wl->irq, wl1271_irq,0 ,DRIVER_NAME , wl);if (ret <0 ) {
Signature · 1 line
1.7.0.4
Quoted 7 lines · ext Gery Kahn
v2 Cleaned changes from development
Option to set reference clock as module param, debugfs readonly permanent MAC address
Signed-off-by Gery Kahn <[email protected]>---
Linville already mentioned once, please *always* include "wl1271:" in front of the patch subject, so that we know what the patches are about.
Signature · 2 lines
Cheers, Luca.