Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
Hi
After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120 (sometimes) doesn't work correctly.
I get random the following errors:
[ 53.216153] DVB: registering new adapter (saa7133[0]) [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.840013] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware uploading [ 58.280136] tda10048_firmware_upload: firmware uploaded [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264 [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.420157] tda18271_toggle_output: error -5 on line 47 [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns) [ 256.293639] eth0: link up. [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 263.523498] eth0: link down. [ 265.258740] eth0: link up. [ 266.460026] eth0: no IPv6 routers present [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9869.636178] tda18271_init: error -5 on line 826 [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9872.636232] tda18271_toggle_output: error -5 on line 47 [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9998.240178] tda18271_init: error -5 on line 826 [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [10001.240190] tda18271_toggle_output: error -5 on line 47
Any ideas?
Thanks
Quoted 4 lines · fabio tirapelle
Hi
After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120 (sometimes) doesn't work correctly.
Well, this is not an ACPI problem, so I'm not sure why you report it here.
thanks,
rui
Quoted 46 lines
I get random the following errors:
[ 53.216153] DVB: registering new adapter (saa7133[0]) [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.840013] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware uploading [ 58.280136] tda10048_firmware_upload: firmware uploaded [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264 [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.420157] tda18271_toggle_output: error -5 on line 47 [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns) [ 256.293639] eth0: link up. [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 263.523498] eth0: link down. [ 265.258740] eth0: link up. [ 266.460026] eth0: no IPv6 routers present [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9869.636178] tda18271_init: error -5 on line 826 [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9872.636232] tda18271_toggle_output: error -5 on line 47 [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9998.240178] tda18271_init: error -5 on line 826 [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [10001.240190] tda18271_toggle_output: error -5 on line 47Any ideas?
Thanks--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 15 lines · fabio tirapelle
Hi
After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120 (sometimes) doesn't work correctly.
I get random the following errors:[ 53.216153] DVB: registering new adapter (saa7133[0]) [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.840013] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware uploading [ 58.280136] tda10048_firmware_upload: firmware uploaded [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
Quoted 1 line
returned: -5
Can you collect the complete dmesg log, please? If you still have the 9.10 kernel and can collect a log from that for comparison, that would be great, too.
I don't see an indication that it's ACPI-related, so maybe [email protected] would be a better place. Please copy me, too :-)
Bjorn