Skip to contentSkip to conversation

arm1136, qong: add support for ELF relocations

PATCH New Heiko Schocher 3 participants 8 messages Oct 12, 2010 – Oct 13, 2010 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm1136, qong: add support for ELF relocations

---
 arch/arm/cpu/arm1136/start.S    |  171 ++++++++++++++++++++++-----------------
 arch/arm/cpu/arm1136/u-boot.lds |    8 ++
 include/configs/qong.h          |    2 +-
 3 files changed, 105 insertions(+), 76 deletions(-)
arch/arm/cpu/arm1136/start.S +96 -75
index 494768e..a86114b 100644
@@ -89,48 +89,35 @@ _end_vect:
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
  */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
-
-.globl _bss_end
-_bss_end:
-	.word _end
-
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _datarel_start
-_datarel_start:
-	.word __datarel_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+	.word __bss_start - _start
 
-.globl _datarelrolocal_start
-_datarelrolocal_start:
-	.word __datarelrolocal_start
+.globl _bss_end_ofs
+_bss_end_ofs:
+	.word _end - _start
 
-.globl _datarellocal_start
-_datarellocal_start:
-	.word __datarellocal_start
+.globl _datarel_start_ofs
+_datarel_start_ofs:
+	.word __datarel_start - _start
 
-.globl _datarelro_start
-_datarelro_start:
-	.word __datarelro_start
+.globl _datarelrolocal_start_ofs
+_datarelrolocal_start_ofs:
+	.word __datarelrolocal_start - _start
 
-.globl _got_start
-_got_start:
-	.word __got_start
+.globl _datarellocal_start_ofs
+_datarellocal_start_ofs:
+	.word __datarellocal_start - _start
 
-.globl _got_end
-_got_end:
-	.word __got_end
-#endif
+.globl _datarelro_start_ofs
+_datarelro_start_ofs:
+	.word __datarelro_start - _start
 
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
@@ -225,9 +212,8 @@ stack_setup:
 
 	adr	r0, _start
 	ldr	r2, _TEXT_BASE
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot	    */
-	add	r2, r0, r2		/* r2 <- source end address	    */
+	ldr	r3, _bss_start_ofs
+	add	r2, r0, r3		/* r2 <- source end address	    */
 	cmp	r0, r6
 	beq	clear_bss
 
@@ -239,36 +225,54 @@ copy_loop:
 	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
-	/* fix got entries */
-	ldr	r1, _TEXT_BASE
-	mov	r0, r7			/* reloc addr */
-	ldr	r2, _got_start		/* addr in Flash */
-	ldr	r3, _got_end		/* addr in Flash */
-	sub	r3, r3, r1
-	add	r3, r3, r0
-	sub	r2, r2, r1
-	add	r2, r2, r0
-
+	/*
+	 * fix .rel.dyn relocations
+	 */
+	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
+	sub	r9, r7, r0		/* r9 <- relocation offset */
+	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
+	add	r10, r10, r0		/* r10 <- sym table in FLASH */
+	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
+	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
+	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
+	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
 fixloop:
-	ldr	r4, [r2]
-	sub	r4, r4, r1
-	add	r4, r4, r0
-	str	r4, [r2]
-	add	r2, r2, #4
+	ldr	r0, [r2]	/* r0 <- location to fix up, IN FLASH! */
+	add	r0, r9		/* r0 <- location to fix up in RAM */
+	ldr	r1, [r2, #4]
+	and	r8, r1, #0xff
+	cmp	r8, #23		/* relative fixup? */
+	beq	fixrel
+	cmp	r8, #2		/* absolute fixup? */
+	beq	fixabs
+	/* ignore unknown type of fixup */
+	b	fixnext
+fixabs:
+	/* absolute fix: set location to (offset) symbol value */
+	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
+	add	r1, r10, r1		/* r1 <- address of symbol in table */
+	ldr	r1, [r1, #4]		/* r1 <- symbol value */
+	add	r1, r9			/* r1 <- relocated sym addr */
+	b	fixnext
+fixrel:
+	/* relative fix: increase location by offset */
+	ldr	r1, [r0]
+	add	r1, r1, r9
+fixnext:
+	str	r1, [r0]
+	add	r2, r2, #8	/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
-	bne	fixloop
+	ble	fixloop
 #endif
 #endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start
-	ldr	r1, _bss_end
+	ldr	r0, _bss_start_ofs
+	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
 	mov	r4, r7			/* reloc addr */
-	sub	r0, r0, r3
 	add	r0, r0, r4
-	sub	r1, r1, r3
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
@@ -283,24 +287,34 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
  * initialization, now running from RAM.
  */
 #ifdef CONFIG_NAND_SPL
-	ldr     pc, _nand_boot
-
-_nand_boot: .word nand_boot
+	ldr     r0, _nand_boot_ofs
+	adr	r1, _start
+	add	pc, r0, r1
+_nand_boot_ofs
+	: .word nand_boot - _start
 #else
 jump_2_ram:
-	ldr	r0, _TEXT_BASE
-	ldr	r2, _board_init_r
-	sub	r2, r2, r0
-	add	r2, r2, r7	/* position from board_init_r in RAM */
+	ldr	r0, _board_init_r_ofs
+	adr	r1, _start
+	add	r0, r0, r1
+	add	lr, r0, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
 	mov	r1, r7		/* dest_addr */
 	/* jump to it ... */
-	mov	lr, r2
 	mov	pc, lr
 
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+	.word board_init_r - _start
 #endif
+
+_rel_dyn_start_ofs:
+	.word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+	.word __rel_dyn_end - _start
+_dynsym_start_ofs:
+	.word __dynsym_start - _start
+
 #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
 /*
  * the actual reset code
@@ -375,8 +389,11 @@ stack_setup:
 	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
 
 clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment	    */
-	ldr	r1, _bss_end		/* stop here			    */
+	adr	r2, _start
+	ldr	r0, _bss_start_ofs	/* find start of bss segment        */
+	add	r0, r0, r2
+	ldr	r1, _bss_end_ofs	/* stop here                        */
+	add	r1, r1, r2
 	mov	r2, #0x00000000		/* clear			    */
 
 #ifndef CONFIG_PRELOADER
@@ -386,15 +403,19 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	bne	clbss_l
 #endif
 
-	ldr	pc, _start_armboot
+	ldr	r0, _start_armboot_ofs
+	adr	r1, _start
+	add	r0, r0, r1
+	ldr	pc, r0
 
+_start_armboot_ofs:
 #ifdef CONFIG_NAND_SPL
-_start_armboot: .word nand_boot
+	.word nand_boot - _start
 #else
 #ifdef CONFIG_ONENAND_IPL
-_start_armboot: .word start_oneboot
+	.word start_oneboot - _start
 #else
-_start_armboot: .word start_armboot
+	.word start_armboot - _start
 #endif /* CONFIG_ONENAND_IPL */
 #endif /* CONFIG_NAND_SPL */
 
@@ -487,7 +508,7 @@ cpu_init_crit:
 #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, IRQ_STACK_START_IN		@ set base 2 words into abort stack
 #else
-	ldr	r2, _armboot_start
+	adr	r2, _start
 	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
 	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 #endif
@@ -524,8 +545,8 @@ cpu_init_crit:
 #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack (enter in banked mode)
 #else
-	ldr	r13, _armboot_start		@ setup our mode stack (enter in banked mode)
-	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
+	adr	r13, _start			@ setup our mode stack (enter in banked mode)
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
 	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
 #endif
 
arch/arm/cpu/arm1136/u-boot.lds +8 -0
index 1db4b49..99bd6d5 100644
@@ -59,6 +59,14 @@ SECTIONS
 		*(.data.rel.ro)
 	}
 
+	. = ALIGN(4);
+	__rel_dyn_start = .;
+	.rel.dyn : { *(.rel.dyn) }
+	__rel_dyn_end = .;
+
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
+
 	__got_start = .;
 	. = ALIGN(4);
 	.got : { *(.got) }
include/configs/qong.h +1 -1
index cbb53dd..c474112 100644
@@ -283,7 +283,7 @@ extern int qong_nand_rdy(void *chip);
 	"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
 
 /* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+#define	CONFIG_RELOC_FIXUP_WORKS
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_END		IRAM_SIZE
Signature · 1 line
1.7.2.3
#1 lore raw

PATCH 1/1 arm1136, qong: add support for ELF relocations

Le 12/10/2010 13:31, Heiko Schocher a ?crit :

Quoted 3 lines

---

I assume this is [ELF_RELOC], not [NEW_RELOC], right? I'm asking because using the same tag for all "elf_reloc" branch related patches makes it easier to find them all back.

arch/arm/cpu/arm1136/u-boot.lds SECTIONS · line 72

Quoted 8 lines
arch/arm/cpu/arm1136/u-boot.lds +3 -0
 
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
+
  	__got_start = .;
  	. = ALIGN(4);
  	.got : { *(.got) }

Do you need to keep .got in the linker file? I think it can be removed.

You could also add

	/DISCARD/ : { *(.dynstr*) }
	/DISCARD/ : { *(.dynamic*) }
	/DISCARD/ : { *(.plt*) }
	/DISCARD/ : { *(.interp*) }
	/DISCARD/ : { *(.gnu*) }

At the end of the sections statement.

include/configs/qong.h extern int qong_nand_rdy(void *chip); · line 286

Quoted 3 lines
include/configs/qong.h +1 -0
 
+#define	CONFIG_RELOC_FIXUP_WORKS

I believe this is now common to all ARMs, hence unneeded in config files.

Amicalement,

Signature · 1 line
Albert.
#2 lore raw

PATCH 1/1 arm1136, qong: add support for ELF relocations

Dear Albert ARIBAUD,

Quoted 22 lines · In message <[email protected]> you wrote:

Le 12/10/2010 13:31, Heiko Schocher a ?crit :

Quoted 3 lines

---

I assume this is [ELF_RELOC], not [NEW_RELOC], right? I'm asking because using the same tag for all "elf_reloc" branch related patches makes it easier to find them all back.

arch/arm/cpu/arm1136/u-boot.lds SECTIONS · line 72

Quoted 8 lines
arch/arm/cpu/arm1136/u-boot.lds +3 -0
 
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
+
  	__got_start = .;
  	. = ALIGN(4);
  	.got : { *(.got) }

Do you need to keep .got in the linker file? I think it can be removed.

You could also add

Quoted 7 lines
	/DISCARD/ : { *(.dynstr*) }
	/DISCARD/ : { *(.dynamic*) }
	/DISCARD/ : { *(.plt*) }
	/DISCARD/ : { *(.interp*) }
	/DISCARD/ : { *(.gnu*) }

At the end of the sections statement.

Agreed.

Heiko, can you please retest / resubmit? Thanks.

Quoted 5 lines

include/configs/qong.h extern int qong_nand_rdy(void *chip); · line 286

Quoted 3 lines
include/configs/qong.h +1 -0
 
+#define	CONFIG_RELOC_FIXUP_WORKS

I believe this is now common to all ARMs, hence unneeded in config files.

This should then be done for all board, i. e. in a separate commit.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The day-to-day travails of the IBM programmer are so amusing to  most
of us who are fortunate enough never to have been one - like watching
Charlie Chaplin trying to cook a shoe.
#3 lore raw

PATCH 1/1 arm1136, qong: add support for ELF relocations

Hello Wolfgang,

Quoted 32 lines · Wolfgang Denk

Dear Albert ARIBAUD,

Quoted 19 lines · In message <[email protected]> you wrote:

Le 12/10/2010 13:31, Heiko Schocher a ?crit :

Quoted 3 lines

---

I assume this is [ELF_RELOC], not [NEW_RELOC], right? I'm asking because using the same tag for all "elf_reloc" branch related patches makes it easier to find them all back.

arch/arm/cpu/arm1136/u-boot.lds SECTIONS · line 72

Quoted 7 lines
arch/arm/cpu/arm1136/u-boot.lds +3 -0
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
+
  	__got_start = .;
  	. = ALIGN(4);
  	.got : { *(.got) }

Do you need to keep .got in the linker file? I think it can be removed.

You could also add

Quoted 7 lines
	/DISCARD/ : { *(.dynstr*) }
	/DISCARD/ : { *(.dynamic*) }
	/DISCARD/ : { *(.plt*) }
	/DISCARD/ : { *(.interp*) }
	/DISCARD/ : { *(.gnu*) }

At the end of the sections statement.

Agreed.

Quoted 7 lines

Heiko, can you please retest / resubmit? Thanks.

Quoted 3 lines

include/configs/qong.h extern int qong_nand_rdy(void *chip); · line 286

Quoted 2 lines
include/configs/qong.h +1 -0
+#define	CONFIG_RELOC_FIXUP_WORKS

I believe this is now common to all ARMs, hence unneeded in config files.

This should then be done for all board, i. e. in a separate commit.

This should be done in arch/arm/include/asm/config.h

Hmm.. as I have to fix this patch for qong board, should I do a patchseries which removes first CONFIG_RELOC_FIXUP_WORKS in config files and then a second, which converts the qong board for elf relocation?

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#4 lore raw

PATCH 1/1 arm1136, qong: add support for ELF relocations

In reply to Albert ARIBAUD

Hello Albert,

Quoted 8 lines · Albert ARIBAUD

Le 12/10/2010 13:31, Heiko Schocher a ?crit :

Quoted 3 lines

---

I assume this is [ELF_RELOC], not [NEW_RELOC], right? I'm asking because using the same tag for all "elf_reloc" branch related patches makes it easier to find them all back.

Ups, you are right, fix this.

Quoted 10 lines

arch/arm/cpu/arm1136/u-boot.lds SECTIONS · line 72

Quoted 8 lines
arch/arm/cpu/arm1136/u-boot.lds +3 -0
 
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
+
  	__got_start = .;
  	. = ALIGN(4);
  	.got : { *(.got) }

Do you need to keep .got in the linker file? I think it can be removed.

Hmm.. think you are right, I try this, thanks.

Quoted 9 lines

You could also add

	/DISCARD/ : { *(.dynstr*) }
	/DISCARD/ : { *(.dynamic*) }
	/DISCARD/ : { *(.plt*) }
	/DISCARD/ : { *(.interp*) }
	/DISCARD/ : { *(.gnu*) }

At the end of the sections statement.

Ok.

Quoted 5 lines

include/configs/qong.h extern int qong_nand_rdy(void *chip); · line 286

Quoted 3 lines
include/configs/qong.h +1 -0
 
+#define	CONFIG_RELOC_FIXUP_WORKS

I believe this is now common to all ARMs, hence unneeded in config files.

Hmm.. instead we should remove in arch/arm/include/asm/config.h

24 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) 25 /* Relocation to SDRAM works on all ARM boards */ 26 #define CONFIG_RELOC_FIXUP_WORKS
27 #endif

this #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ... #endif

And remove for all arm board, which now define CONFIG_RELOC_FIXUP_WORKS this in the config file. If you are OK with that, I can make such a patch.

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#5 lore raw

PATCH 1/1 arm1136, qong: add support for ELF relocations

Le 13/10/2010 07:27, Heiko Schocher a ?crit :

Quoted 4 lines
Quoted 3 lines
Quoted 1 line

+#define CONFIG_RELOC_FIXUP_WORKS

I believe this is now common to all ARMs, hence unneeded in config files.

Quoted 8 lines

Hmm.. instead we should remove in arch/arm/include/asm/config.h

24 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) 25 /* Relocation to SDRAM works on all ARM boards */ 26 #define CONFIG_RELOC_FIXUP_WORKS
27 #endif

this #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ... #endif

This is already done in my first patchset -- unless I did it wrong of course.

Amicalement,

Signature · 1 line
Albert.
#6 lore raw

PATCH v2 1/1 arm1136, qong: add support for ELF relocations

In reply to Heiko Schocher
---
 arch/arm/cpu/arm1136/start.S    |  171 ++++++++++++++++++++++-----------------
 arch/arm/cpu/arm1136/u-boot.lds |   15 +++-
 include/configs/qong.h          |    1 -
 3 files changed, 108 insertions(+), 79 deletions(-)

changes since v1:
- fixed [ELF_RELOC] in subject messsage
- added to discard unneeded sections in lds file
- removed CONFIG_RELOC_FIXUP_WORKS define in
board config.

arch/arm/cpu/arm1136/start.S +96 -75
index 494768e..a86114b 100644
@@ -89,48 +89,35 @@ _end_vect:
 _TEXT_BASE:
 	.word	TEXT_BASE
 
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _armboot_start
-_armboot_start:
-	.word _start
-#endif
-
 /*
  * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
  */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
-
-.globl _bss_end
-_bss_end:
-	.word _end
-
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-.globl _datarel_start
-_datarel_start:
-	.word __datarel_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+	.word __bss_start - _start
 
-.globl _datarelrolocal_start
-_datarelrolocal_start:
-	.word __datarelrolocal_start
+.globl _bss_end_ofs
+_bss_end_ofs:
+	.word _end - _start
 
-.globl _datarellocal_start
-_datarellocal_start:
-	.word __datarellocal_start
+.globl _datarel_start_ofs
+_datarel_start_ofs:
+	.word __datarel_start - _start
 
-.globl _datarelro_start
-_datarelro_start:
-	.word __datarelro_start
+.globl _datarelrolocal_start_ofs
+_datarelrolocal_start_ofs:
+	.word __datarelrolocal_start - _start
 
-.globl _got_start
-_got_start:
-	.word __got_start
+.globl _datarellocal_start_ofs
+_datarellocal_start_ofs:
+	.word __datarellocal_start - _start
 
-.globl _got_end
-_got_end:
-	.word __got_end
-#endif
+.globl _datarelro_start_ofs
+_datarelro_start_ofs:
+	.word __datarelro_start - _start
 
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
@@ -225,9 +212,8 @@ stack_setup:
 
 	adr	r0, _start
 	ldr	r2, _TEXT_BASE
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot	    */
-	add	r2, r0, r2		/* r2 <- source end address	    */
+	ldr	r3, _bss_start_ofs
+	add	r2, r0, r3		/* r2 <- source end address	    */
 	cmp	r0, r6
 	beq	clear_bss
 
@@ -239,36 +225,54 @@ copy_loop:
 	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
-	/* fix got entries */
-	ldr	r1, _TEXT_BASE
-	mov	r0, r7			/* reloc addr */
-	ldr	r2, _got_start		/* addr in Flash */
-	ldr	r3, _got_end		/* addr in Flash */
-	sub	r3, r3, r1
-	add	r3, r3, r0
-	sub	r2, r2, r1
-	add	r2, r2, r0
-
+	/*
+	 * fix .rel.dyn relocations
+	 */
+	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
+	sub	r9, r7, r0		/* r9 <- relocation offset */
+	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
+	add	r10, r10, r0		/* r10 <- sym table in FLASH */
+	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
+	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
+	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
+	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
 fixloop:
-	ldr	r4, [r2]
-	sub	r4, r4, r1
-	add	r4, r4, r0
-	str	r4, [r2]
-	add	r2, r2, #4
+	ldr	r0, [r2]	/* r0 <- location to fix up, IN FLASH! */
+	add	r0, r9		/* r0 <- location to fix up in RAM */
+	ldr	r1, [r2, #4]
+	and	r8, r1, #0xff
+	cmp	r8, #23		/* relative fixup? */
+	beq	fixrel
+	cmp	r8, #2		/* absolute fixup? */
+	beq	fixabs
+	/* ignore unknown type of fixup */
+	b	fixnext
+fixabs:
+	/* absolute fix: set location to (offset) symbol value */
+	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
+	add	r1, r10, r1		/* r1 <- address of symbol in table */
+	ldr	r1, [r1, #4]		/* r1 <- symbol value */
+	add	r1, r9			/* r1 <- relocated sym addr */
+	b	fixnext
+fixrel:
+	/* relative fix: increase location by offset */
+	ldr	r1, [r0]
+	add	r1, r1, r9
+fixnext:
+	str	r1, [r0]
+	add	r2, r2, #8	/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
-	bne	fixloop
+	ble	fixloop
 #endif
 #endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start
-	ldr	r1, _bss_end
+	ldr	r0, _bss_start_ofs
+	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
 	mov	r4, r7			/* reloc addr */
-	sub	r0, r0, r3
 	add	r0, r0, r4
-	sub	r1, r1, r3
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
@@ -283,24 +287,34 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
  * initialization, now running from RAM.
  */
 #ifdef CONFIG_NAND_SPL
-	ldr     pc, _nand_boot
-
-_nand_boot: .word nand_boot
+	ldr     r0, _nand_boot_ofs
+	adr	r1, _start
+	add	pc, r0, r1
+_nand_boot_ofs
+	: .word nand_boot - _start
 #else
 jump_2_ram:
-	ldr	r0, _TEXT_BASE
-	ldr	r2, _board_init_r
-	sub	r2, r2, r0
-	add	r2, r2, r7	/* position from board_init_r in RAM */
+	ldr	r0, _board_init_r_ofs
+	adr	r1, _start
+	add	r0, r0, r1
+	add	lr, r0, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
 	mov	r1, r7		/* dest_addr */
 	/* jump to it ... */
-	mov	lr, r2
 	mov	pc, lr
 
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+	.word board_init_r - _start
 #endif
+
+_rel_dyn_start_ofs:
+	.word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+	.word __rel_dyn_end - _start
+_dynsym_start_ofs:
+	.word __dynsym_start - _start
+
 #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
 /*
  * the actual reset code
@@ -375,8 +389,11 @@ stack_setup:
 	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
 
 clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment	    */
-	ldr	r1, _bss_end		/* stop here			    */
+	adr	r2, _start
+	ldr	r0, _bss_start_ofs	/* find start of bss segment        */
+	add	r0, r0, r2
+	ldr	r1, _bss_end_ofs	/* stop here                        */
+	add	r1, r1, r2
 	mov	r2, #0x00000000		/* clear			    */
 
 #ifndef CONFIG_PRELOADER
@@ -386,15 +403,19 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	bne	clbss_l
 #endif
 
-	ldr	pc, _start_armboot
+	ldr	r0, _start_armboot_ofs
+	adr	r1, _start
+	add	r0, r0, r1
+	ldr	pc, r0
 
+_start_armboot_ofs:
 #ifdef CONFIG_NAND_SPL
-_start_armboot: .word nand_boot
+	.word nand_boot - _start
 #else
 #ifdef CONFIG_ONENAND_IPL
-_start_armboot: .word start_oneboot
+	.word start_oneboot - _start
 #else
-_start_armboot: .word start_armboot
+	.word start_armboot - _start
 #endif /* CONFIG_ONENAND_IPL */
 #endif /* CONFIG_NAND_SPL */
 
@@ -487,7 +508,7 @@ cpu_init_crit:
 #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, IRQ_STACK_START_IN		@ set base 2 words into abort stack
 #else
-	ldr	r2, _armboot_start
+	adr	r2, _start
 	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
 	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 #endif
@@ -524,8 +545,8 @@ cpu_init_crit:
 #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack (enter in banked mode)
 #else
-	ldr	r13, _armboot_start		@ setup our mode stack (enter in banked mode)
-	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
+	adr	r13, _start			@ setup our mode stack (enter in banked mode)
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
 	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
 #endif
 
arch/arm/cpu/arm1136/u-boot.lds +12 -3
index 1db4b49..31f43f0 100644
@@ -59,11 +59,14 @@ SECTIONS
 		*(.data.rel.ro)
 	}
 
-	__got_start = .;
 	. = ALIGN(4);
-	.got : { *(.got) }
+	__rel_dyn_start = .;
+	.rel.dyn : { *(.rel.dyn) }
+	__rel_dyn_end = .;
+
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
 
-	__got_end = .;
 	. = .;
 	__u_boot_cmd_start = .;
 	.u_boot_cmd : { *(.u_boot_cmd) }
@@ -73,4 +76,10 @@ SECTIONS
 	__bss_start = .;
 	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
+
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
 }
include/configs/qong.h +0 -1
index cbb53dd..ab4f754 100644
@@ -283,7 +283,6 @@ extern int qong_nand_rdy(void *chip);
 	"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
 
 /* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_END		IRAM_SIZE
Signature · 1 line
1.7.2.3
#7 lore raw

PATCH v2 1/1 arm1136, qong: add support for ELF relocations

Dear Heiko Schocher,

Quoted 8 lines · In message <[email protected]> you wrote:
---
 arch/arm/cpu/arm1136/start.S    |  171 ++++++++++++++++++++++-----------------
 arch/arm/cpu/arm1136/u-boot.lds |   15 +++-
 include/configs/qong.h          |    1 -
 3 files changed, 108 insertions(+), 79 deletions(-)

Applied to u-boot-arm, elf_reloc branch. Thanks.

Best regards,

Wolfgang Denk

Signature · 3 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de