Skip to contentSkip to conversation

synclink_gt fix per device locking

PATCH New Paul Fulghum 1 participant 1 message Oct 20, 2010 Char and misc drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 synclink_gt fix per device locking

Fix a long standing bug with per device locking.

Each device has an associated spinlock for synchronizing access to hardware and state information with the ISR. A single hardware card has one or more devices.

Bug: Non ISR code correctly acquires and releases the per device lock. ISR incorrectly always acquires and releases the lock of the first device on the card.

The decoupled and list based nature of the ISR and deferred processing interaction allowed this to work in normal operation. Exceptional events like an application forcing hardware shutdown, reset, or reconfiguration while active can trigger the bug.

Fixed ISR to acquire and release the per device lock.

One exception is manipulation of the GPIO card resource which is global and effectively owned by the first device of the card. Non-ISR access to GPIO resource is changed to use lock of first device on card.

drivers/char/synclink_gt.c +15 -13
@@ -2353,26 +2353,27 @@ static irqreturn_t slgt_interrupt(int du
 
 	DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
 
-	spin_lock(&info->lock);
-
 	while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
 		DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
 		info->irq_occurred = true;
 		for(i=0; i < info->port_count ; i++) {
 			if (info->port_array[i] == NULL)
 				continue;
+			spin_lock(&info->port_array[i]->lock);
 			if (gsr & (BIT8 << i))
 				isr_serial(info->port_array[i]);
 			if (gsr & (BIT16 << (i*2)))
 				isr_rdma(info->port_array[i]);
 			if (gsr & (BIT17 << (i*2)))
 				isr_tdma(info->port_array[i]);
+			spin_unlock(&info->port_array[i]->lock);
 		}
 	}
 
 	if (info->gpio_present) {
 		unsigned int state;
 		unsigned int changed;
+		spin_lock(&info->lock);
 		while ((changed = rd_reg32(info, IOSR)) != 0) {
 			DBGISR(("%s iosr=%08x\n", info->device_name, changed));
 			/* read latched state of GPIO signals */
@@ -2384,22 +2385,24 @@ static irqreturn_t slgt_interrupt(int du
 					isr_gpio(info->port_array[i], changed, state);
 			}
 		}
+		spin_unlock(&info->lock);
 	}
 
 	for(i=0; i < info->port_count ; i++) {
 		struct slgt_info *port = info->port_array[i];
-
-		if (port && (port->port.count || port->netcount) &&
+		if (port == NULL)
+			continue;
+		spin_lock(&port->lock);
+		if ((port->port.count || port->netcount) &&
 		    port->pending_bh && !port->bh_running &&
 		    !port->bh_requested) {
 			DBGISR(("%s bh queued\n", port->device_name));
 			schedule_work(&port->task);
 			port->bh_requested = true;
 		}
+		spin_unlock(&port->lock);
 	}
 
-	spin_unlock(&info->lock);
-
 	DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
 	return IRQ_HANDLED;
 }
@@ -2902,7 +2905,7 @@ static int set_gpio(struct slgt_info *in
 		 info->device_name, gpio.state, gpio.smask,
 		 gpio.dir, gpio.dmask));
 
-	spin_lock_irqsave(&info->lock,flags);
+	spin_lock_irqsave(&info->port_array[0]->lock, flags);
 	if (gpio.dmask) {
 		data = rd_reg32(info, IODR);
 		data |= gpio.dmask & gpio.dir;
@@ -2915,7 +2918,7 @@ static int set_gpio(struct slgt_info *in
 		data &= ~(gpio.smask & ~gpio.state);
 		wr_reg32(info, IOVR, data);
 	}
-	spin_unlock_irqrestore(&info->lock,flags);
+	spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
 
 	return 0;
 }
@@ -3016,7 +3019,7 @@ static int wait_gpio(struct slgt_info *i
 		return -EINVAL;
 	init_cond_wait(&wait, gpio.smask);
 
-	spin_lock_irqsave(&info->lock, flags);
+	spin_lock_irqsave(&info->port_array[0]->lock, flags);
 	/* enable interrupts for watched pins */
 	wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
 	/* get current pin states */
@@ -3028,20 +3031,20 @@ static int wait_gpio(struct slgt_info *i
 	} else {
 		/* wait for target state */
 		add_cond_wait(&info->gpio_wait_q, &wait);
-		spin_unlock_irqrestore(&info->lock, flags);
+		spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
 		schedule();
 		if (signal_pending(current))
 			rc = -ERESTARTSYS;
 		else
 			gpio.state = wait.data;
-		spin_lock_irqsave(&info->lock, flags);
+		spin_lock_irqsave(&info->port_array[0]->lock, flags);
 		remove_cond_wait(&info->gpio_wait_q, &wait);
 	}
 
 	/* disable all GPIO interrupts if no waiting processes */
 	if (info->gpio_wait_q == NULL)
 		wr_reg32(info, IOER, 0);
-	spin_unlock_irqrestore(&info->lock,flags);
+	spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
 
 	if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
 		rc = -EFAULT;
@@ -3572,7 +3575,6 @@ static void device_init(int adapter_num,
 
 		/* copy resource information from first port to others */
 		for (i = 1; i < port_count; ++i) {
-			port_array[i]->lock      = port_array[0]->lock;
 			port_array[i]->irq_level = port_array[0]->irq_level;
 			port_array[i]->reg_addr  = port_array[0]->reg_addr;
 			alloc_dma_bufs(port_array[i]);