mx35pdk: add debug board support
Subsystems (2)
PATCH v3 1/1 mx35pdk: add debug board support
From: Xiao Jiang <[email protected]>
Enable debug board support for mx35pdk.
---
Change since v2:
- s/board/debugboard per Bacuch's comment.
Change since v1:
- Add MXC_DEBUG_BOARD in Kconfig per Fabio's comment.
- Redefinition EXPIO_PARENT_INT per Fabio's comment.
arch/arm/mach-mx3/Kconfig | 1 + arch/arm/mach-mx3/mach-mx35_3ds.c | 8 ++++++++ 2 files changed, 9 insertions(+), 0 deletions(-)
arch/arm/mach-mx3/Kconfig +1 -0
@@ -139,6 +139,7 @@ config MACH_ARMADILLO5X0 config MACH_MX35_3DS bool "Support MX35PDK platform" select ARCH_MX35 + select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_IMX_UART default n help
arch/arm/mach-mx3/mach-mx35_3ds.c +8 -0
@@ -35,10 +35,14 @@#include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> +#include <mach/irqs.h> +#include <mach/3ds_debugboard.h> #include "devices-imx35.h" #include "devices.h" +#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) +static const struct imxuart_platform_data uart_pdata__initconst = { .flags =IMXUART_HAVE_RTSCTS , };
@@ -95,6 +99,10 @@ static void __init mxc_board_init(void)imx35_add_imx_uart0 (&uart_pdata);mxc_register_device (&mxc_otg_udc_device, &usb_pdata); + +if (mxc_expio_init (MX35_CS5_BASE_ADDR ,EXPIO_PARENT_INT )) +pr_warn ("Init of the debugboard failed, all " +"devices on the debugboard are unusable.\n" ); }static void __init mx35pdk_timer_init (void )
Signature · 1 line
1.6.3.3
PATCH v3 1/1 mx35pdk: add debug board support
Hi Sascha,
Could you apply the patch in your tree, I have regenrated the patch based on for-rmk-next branch of your tree, pls check the attached patch.
Thanks,
Xiao Jiang
2010/10/21 <[email protected]>
Quoted 62 lines
From: Xiao Jiang <[email protected]>
Enable debug board support for mx35pdk.
Signed-off-by Xiao Jiang <[email protected]>Signed-off-by Fabio Estevam <[email protected]>---
Change since v2:
- s/board/debugboard per Bacuch's comment.Change since v1:
- AddMXC_DEBUG_BOARDinKconfigper Fabio's comment.
- RedefinitionEXPIO_PARENT_INTper Fabio's comment.arch/arm/mach-mx3/Kconfig | 1 + arch/arm/mach-mx3/mach-mx35_3ds.c | 8 ++++++++ 2 files changed, 9 insertions(+), 0 deletions(-)arch/arm/mach-mx3/Kconfig +1
-0@@ -139,6 +139,7 @@ config MACH_ARMADILLO5X0 config MACH_MX35_3DS bool "Support MX35PDK platform" select ARCH_MX35 + select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_IMX_UART default n helparch/arm/mach-mx3/mach-mx35_3ds.c +8
-1@@ -35,10 +35,14 @@#include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> +#include <mach/irqs.h> +#include <mach/3ds_debugboard.h> #include "devices-imx35.h" #include "devices.h" +#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) +static const struct imxuart_platform_data uart_pdata__initconst = { .flags =IMXUART_HAVE_RTSCTS , };@@ -95,6 +99,10 @@ static void __init mxc_board_init(void)imx35_add_imx_uart0 (&uart_pdata);mxc_register_device (&mxc_otg_udc_device, &usb_pdata); + +if (mxc_expio_init (MX35_CS5_BASE_ADDR ,EXPIO_PARENT_INT )) +pr_warn ("Init of the debugboard failed, all " +"devices on the debugboard are unusable.\n" ); }static void __init mx35pdk_timer_init (void ) --
Quoted 3 lines
1.6.3.3
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20101022/863e0fe4/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-mx35pdk-add-debug-board-support-based-rmk-next.patch
Type: application/octet-stream
Size: 1814 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20101022/863e0fe4/attachment.obj>
PATCH v3 1/1 mx35pdk: add debug board support
Xiao,
Quoted 4 lines · xiao jiang
Hi Sascha,
Could you apply the patch in your tree, I have regenrated the patch based on for-rmk-next branch of your tree, pls check the attached patch.
This patch is in imx-for-2.6.37 git tree now.
Regards,
Fabio Estevam
PATCH v3 1/1 mx35pdk: add debug board support
Good to know! :0
Thanks,
Xiao Jiang
2010/10/22, Fabio Estevam <[email protected]>:
Quoted 15 lines
Xiao,
Quoted 5 lines · xiao jiang
Hi Sascha,
Could you apply the patch in your tree, I have regenrated the patch based on
for-rmk-next branch of your tree, pls check the attached patch.This patch is in imx-for-2.6.37 git tree now.
Regards,
Fabio Estevam