Skip to contentSkip to conversation

reply-to and reply-to-sender

mlmmj Morten Bressendorff Schmidt 5 participants 12 messages Oct 22, 2010 – Oct 23, 2010

lore
Share & tools
lore
#0 lore raw

Hi

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

./morten

#1 lore raw
Quoted 4 lines · Morten Bressendorff Schmidt

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

Quoted 8 lines

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

This is a mailclient issue. What email programs are you using?

Signature · 4 lines
Mads Martin Joergensen, http://mmj.dk
"Why make things difficult, when it is possible to make them cryptic
 and totally illogical, with just a little bit more effort?"
                                 -- A. P. J.
#2 lore raw
In reply to Morten Bressendorff Schmidt

Thx...

evolution
2.30.3-1ubuntu7

I'll try other clients in a moment

./morten

Quoted 17 lines · Mads Martin Jørgensen
Quoted 4 lines · Morten Bressendorff Schmidt

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

Quoted 8 lines

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

This is a mailclient issue. What email programs are you using?

#3 lore raw
In reply to Morten Bressendorff Schmidt

Same in Thunderbird, so must be something I did og did not dodo...

Reply to sender/reply to all works for mlmmj-list, but the reply-to hasn't been set on that it seems...

This is my customheaders:
//--------------------------------------
X-Mailinglist: mlmmj-test__example_org
Reply-To: [email protected]
//--------------------------------------

./morten

P.S. Substituted my own domain... Duh!

Quoted 17 lines · Mads Martin Jørgensen
Quoted 4 lines · Morten Bressendorff Schmidt

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

Quoted 8 lines

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

This is a mailclient issue. What email programs are you using?

#4 lore raw
In reply to Morten Bressendorff Schmidt

2010/10/22 Mads Martin Jørgensen <[email protected]>

Quoted 9 lines
Quoted 7 lines · Morten Bressendorff Schmidt

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

Quoted 9 lines
Quoted 5 lines

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

This is a mailclient issue. What email programs are you using?

hmm ... before saying it is the client: show the mailheaders of your received mail. Decisions of a client are based on these :-)

Franky

#5 lore raw
In reply to Morten Bressendorff Schmidt

Thx

Here is what I think you mean:

//-----------------------------------------------------
Return-path: <[email protected]>
X-original-to: [email protected]
Delivered-to: [email protected]
Received: by example.org (Postfix, from userid 116) id 51D72AB03E9; Fri, 22 Oct 2010 15:14:10 +0200 (CEST)
X-spam-checker-version: SpamAssassin 3.3.1 (2010-03-16) on frink X-spam-level:·
X-spam-status: No, score=-1.9 required=5.0 testsºYES_00,RCVD_IN_DNSWL_NONE, TVD_SPACE_RATIO autolearn=ham version=3.3.1
Received: from frink (localhost [127.0.0.1]) by example.org (Postfix) with SMTP id 8D36CAB03E7 for <[email protected]>; Fri, 22 Oct 2010 15:14:09 +0200 (CEST)
X-original-to: [email protected]
Delivered-to: [email protected]
Received: by example.org (Postfix, from userid 116) id 30940AB03E9; Fri, 22 Oct 2010 15:14:09 +0200 (CEST)
Received: from pasmtpB.tele.dk (pasmtpb.tele.dk [ip.ad.dr.ess]) by example.org (Postfix) with ESMTP id 67F74AB03E7 for <[email protected]>; Fri, 22 Oct 2010 15:14:08 +0200 (CEST)
Received: from [ip.add.res.s] (unknown [ip.add.re.ss]) by pasmtpB.tele.dk (Postfix) with ESMTP id 21FC4E30B69 for <[email protected]>; Fri, 22 Oct 2010 15:14:08 +0200 (CEST)
Subject: [mlmmj-test] test
From: Morten Bressendorff Schmidt <[email protected]>
To: mlmmj-test <[email protected]>
Content-type: text/plain
Date: Fri, 22 Oct 2010 15:14:08 +0200
Message-id: <1287753248.2377.33.camel@mbs-laptop>
X-mailinglist: mlmmj-test__example.org
Sender: [email protected]
List-id: <mlmmj-test.example.org>
List-help: <mailto:[email protected]>
List-post: <mailto:[email protected]>
List-subscribe: <mailto:[email protected]>
List-unsubscribe: <mailto:[email protected]>
Mime-version: 1.0
X-mailer: Evolution 2.30.3·
Content-transfer-encoding: 7bit
X-evolution-source: imap://[email protected]/ //-----------------------------------------------------

Substituted email- and ip-addresses, I hope ;)

./morten

Quoted 29 lines · Franky Van Liedekerke

2010/10/22 Mads Martin Jørgensen <[email protected]>

        On Fri, Oct 22, 2010 at 1:48 PM, Morten Bressendorff Schmidt
        <[email protected]> wrote:
        > It's probably me... but...
        >
        > mlmmj ubuntu-package 1.2.17-1.1
        >
        > If I set "Reply-To" to be the mailinglist created, then
        replies go to
        > the list.... fine!
        >
        > But when I use "Reply to sender" in my mailprograms, the
        reply still
        > goes to the mailinglist, not to the person who actually
        wrote the
        > mail...
        >
        > Is what I wan't possible?
        
        
        This is a mailclient issue. What email programs are you using?

hmm ... before saying it is the client: show the mailheaders of your received mail. Decisions of a client are based on these :-)

Franky

#6 lore raw
In reply to Morten Bressendorff Schmidt

IIRC, the Reply-To header is meant to mean what to reply to when replying to the sender. It is designed to be set by the sender, not by the list, to indicate they want replies to them sent elsewhere.

(Many lists set a Reply-To header though. This can make sense if there's never really any reason to reply to the sender, but it's still not technically correct, and many people recommend against it.)

To get a reply-to-list behaviour, you should include a List-Post header (and other List-* headers are also recommended).

RFC2369, RFC2919.

Ben.

Quoted 20 lines · Morten Bressendorff Schmidt

Hi

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

./morten

#7 lore raw
In reply to Morten Bressendorff Schmidt

Thx Ben

Did that just a couple of minutes ago ;)

./morten

Quoted 38 lines · Ben Schmidt

IIRC, the Reply-To header is meant to mean what to reply to when replying to the sender. It is designed to be set by the sender, not by the list, to indicate they want replies to them sent elsewhere.

(Many lists set a Reply-To header though. This can make sense if there's never really any reason to reply to the sender, but it's still not technically correct, and many people recommend against it.)

To get a reply-to-list behaviour, you should include a List-Post header (and other List-* headers are also recommended).

RFC2369, RFC2919.

Ben.

Quoted 20 lines · Morten Bressendorff Schmidt

Hi

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

./morten

#8 lore raw
In reply to Morten Bressendorff Schmidt

Did it help?

In a future release, I hope to include a bunch of sensible defaults for this kind of stuff, to make it easier for people to get it right. Or at the very least, include a list of best practices in the documentation.

Ben.

Quoted 49 lines · Morten Bressendorff Schmidt

Thx Ben

Did that just a couple of minutes ago ;)

./morten

Quoted 38 lines · Ben Schmidt

IIRC, the Reply-To header is meant to mean what to reply to when replying to the sender. It is designed to be set by the sender, not by the list, to indicate they want replies to them sent elsewhere.

(Many lists set a Reply-To header though. This can make sense if there's never really any reason to reply to the sender, but it's still not technically correct, and many people recommend against it.)

To get a reply-to-list behaviour, you should include a List-Post header (and other List-* headers are also recommended).

RFC2369, RFC2919.

Ben.

Quoted 20 lines · Morten Bressendorff Schmidt

Hi

It's probably me... but...

mlmmj ubuntu-package 1.2.17-1.1

If I set "Reply-To" to be the mailinglist created, then replies go to the list.... fine!

But when I use "Reply to sender" in my mailprograms, the reply still goes to the mailinglist, not to the person who actually wrote the mail...

Is what I wan't possible?

./morten

#9 lore raw
In reply to Morten Bressendorff Schmidt
Quoted 6 lines · Ben Schmidt

To get a reply-to-list behaviour, you should include a List-Post header (and other List-* headers are also recommended).

RFC2369, RFC2919.

Ben.

Can you elaborate? If my list is [email protected], what should I set as header in MLMMJ, so that people don't reply to me by default?

Thomas

#10 lore raw
In reply to Morten Bressendorff Schmidt
Quoted 4 lines · Thomas Goirand
Quoted 3 lines · Ben Schmidt

To get a reply-to-list behaviour, you should include a List-Post header (and other List-* headers are also recommended).

Quoted 8 lines
Quoted 3 lines

RFC2369, RFC2919.

Ben.

Can you elaborate? If my list is [email protected], what should I set as header in MLMMJ, so that people don't reply to me by default?

Thomas

When I say 'get a reply-to-list behaviour' I mean 'have that kind of reply made available as an option', not that it will be the default.

And I believe if you actually follow the standards, that's all you can do.

I believe the thinking behind the standards is that whether reply to author or reply to list is the default should be dictated by the mail client or user preference, not the mail/list.

There are heaps of people (myself included) who think this is something that a list should be able to dictate. And some (myself included) do abuse Reply-To in order to get that behaviour. When you do so, though, you do lose the ability to reply to the author--particularly if the author actually set a Reply-To header, as it will have been lost, and mail sent to the From address might not go anywhere useful.

Of course the Sender header is typically abused by mailing lists, too. Though the standards clearly say it should be the address of a real person responsible for sending the mail, which, at a stretch, could be the mailing list owner, more often than not, the mailing list posting address is used, by my observation.

Unforunately email standards and email practice don't always have too strong a connection. This is another good reason to try to document this stuff, and/or provide reasonable defaults with Mlmmj, IMHO, as it is pretty hard to sort this kind of stuff out since neither following the spec nor doing 'what everyone else does' is necessarily best.

(Disclaimer: I'm far from an expert!)

Smiles,

Ben.

#11 lore raw
In reply to Morten Bressendorff Schmidt
Quoted 20 lines · On Sat, 23 Oct 2010 01:44:42 +1100 Ben Schmidt <[email protected]>…
Quoted 4 lines · Thomas Goirand
Quoted 3 lines · Ben Schmidt

To get a reply-to-list behaviour, you should include a List-Post header (and other List-* headers are also recommended).

Quoted 8 lines
Quoted 3 lines

RFC2369, RFC2919.

Ben.

Can you elaborate? If my list is [email protected], what should I set as header in MLMMJ, so that people don't reply to me by default?

Thomas

When I say 'get a reply-to-list behaviour' I mean 'have that kind of reply made available as an option', not that it will be the default.

And I believe if you actually follow the standards, that's all you can do.

<snip>

Quoted 5 lines

(Disclaimer: I'm far from an expert!)

Smiles,

Ben.

What you can try: set the "Sender" mailheader to you personally, and the reply-to to the list. In your case the Sender header was also set to the list. That should work ...

Franky