Skip to contentSkip to conversation

Remove config.mk for da8xxevm based boards.

PATCH New Sughosh Ganu 3 participants 3 messages Oct 22, 2010 – Oct 26, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Remove config.mk for da8xxevm based boards.

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file.

---
 board/davinci/da8xxevm/config.mk |   43 --------------------------------------
 include/configs/da830evm.h       |    1 +
 include/configs/da850evm.h       |    1 +
 3 files changed, 2 insertions(+), 43 deletions(-)
 delete mode 100644 board/davinci/da8xxevm/config.mk
board/davinci/da8xxevm/config.mk deleted +0 -43
deleted file mode 100644
index e176f7d..0000000
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
-#
-# Copyright (C) 2007 Sergey Kubushyn <[email protected]>
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <[email protected]>
-# David Mueller, ELSOFT AG, <[email protected]>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Texas Instruments DA8xx EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# DA8xx EVM has 1 bank of 64 MB SDRAM (2 16Meg x16 chips).
-# Physical Address:
-# C000'0000 to C400'0000
-#
-# Linux-Kernel is expected to be at C000'8000, entry C000'8000
-# (mem base + reserved)
-#
-# we load ourself to C108 '0000
-
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0xC1080000
include/configs/da830evm.h +1 -0
index 160ece2..4d93482 100644
@@ -42,6 +42,7 @@
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
+#define CONFIG_SYS_TEXT_BASE		0xc1080000
 
 /*
  * Memory Info
include/configs/da850evm.h +1 -0
index 7bf6336..523002d 100644
@@ -40,6 +40,7 @@
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE		0xc1080000
 
 /*
  * Memory Info
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 1/1 Remove config.mk for da8xxevm based boards.

Quoted 4 lines · Sughosh Ganu

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file.

Applies cleanly to fff6ec382c139eb242bd85356e66a0bc43becb63. No checkstyle warnings.

Tested with da850evm + nand and env.oob.

Best Regards,
Ben Gardiner

---
Nanometrics Inc.
http://www.nanometrics.ca

#2 lore raw

PATCH 1/1 Remove config.mk for da8xxevm based boards.

In reply to Sughosh Ganu

Dear Sughosh Ganu,

Quoted 10 lines · In message <[email protected]> you…

Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file.

---
 board/davinci/da8xxevm/config.mk |   43 --------------------------------------
 include/configs/da830evm.h       |    1 +
 include/configs/da850evm.h       |    1 +
 3 files changed, 2 insertions(+), 43 deletions(-)
 delete mode 100644 board/davinci/da8xxevm/config.mk

Applied, thanks.

Dear Sandeep, hope it's OK that I pulled this directly.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
How many QA engineers does it take to screw in a lightbulb? 3:  1  to
screw it in and 2 to say "I told you so" when it doesn't work.