Skip to contentSkip to conversation

Raspberry Pi Compute Module 5 support

DISCUSSION Jonas Kvinge 3 participants 7 messages Jun 5, 2025 – Jun 15, 2025

lore
Share & tools
lore
#0 lore raw

Hi,
I'm trying to boot openSUSE Linux on an CM5 using a sourcekit io board
(https://sourcekit.cc/#/).
u-boot seem to be stuck with the logo on the upper right corner, no text.
I re-built u-boot using the latest source from git from the next branch and also set CONFIG_LOG in make menuconfig, but still no text.

Is the CM5 supported by u-boot?

Jonas

#1 lore raw

You need to take raspberry  ( custodian version)

Making sure you're not a bot!

| 
| 
|  | 

Making sure you're not a bot!

|

|

|

 But it is still missing the device tree fro bcm7712 ( RPI 5 is bcm7712)But you can Dow load the dtb file from the pre built dtb file from raspberry pi images and  use those  device tree sources ( using a dtc )

On Thursday, June 5, 2025 at 02:13:24 PM PDT, Jonas Kvinge <[email protected]> wrote:

Hi,
I'm trying to boot openSUSE Linux on an CM5 using a sourcekit io board
(https://sourcekit.cc/#/).
u-boot seem to be stuck with the logo on the upper right corner, no text.
I re-built u-boot using the latest source from git from the next branch and also set CONFIG_LOG in make menuconfig, but still no text.

Is the CM5 supported by u-boot?

Jonas

#2 lore raw

Which branch? The master branch is 1 year old.

Quoted 37 lines · Jojan

You need to take raspberry  ( custodian version)

Making sure you're not a bot! [1]

Making sure you're not a bot!
[1]

But it is still missing the device tree fro bcm7712 ( RPI 5 is bcm7712)
But you can Dow load the dtb file from the pre built dtb file from raspberry pi images

and  use those  device tree sources ( using a dtc )

On Thursday, June 5, 2025 at 02:13:24 PM PDT, Jonas Kvinge <[email protected]> wrote:

Hi,
I'm trying to boot openSUSE Linux on an CM5 using a sourcekit io board
(https://sourcekit.cc/#/).
u-boot seem to be stuck with the logo on the upper right corner, no text.
I re-built u-boot using the latest source from git from the next branch
and also set CONFIG_LOG in make menuconfig, but still no text.

Quoted 5 lines

Is the CM5 supported by u-boot?

Jonas

[1] Making sure you're not a bot!
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi

#3 lore raw

Master is ok. But it won’t work as is. You need to have rpi5 configuration and the dts files. I did it a year back. But since  did not have bcm7712 dts files, I took the dtb file from the raspberry pi images ( it has a pre built dtb file, and extracted dts)
dtc -I dtb -O dts -o <output.dts> -i< input.dtb>

On Saturday, June 7, 2025 at 03:26:31 AM PDT, Jonas Kvinge <[email protected]> wrote:

Which branch? The master branch is 1 year old.
On Thu, 2025-06-05 at 21:52 +0000, Jojan wrote:
You need to take raspberry  ( custodian version)

Making sure you're not a bot!

| 
| 
|  | 

Making sure you're not a bot!

|

|

|

 But it is still missing the device tree fro bcm7712 ( RPI 5 is bcm7712)But you can Dow load the dtb file from the pre built dtb file from raspberry pi images and  use those  device tree sources ( using a dtc )

On Thursday, June 5, 2025 at 02:13:24 PM PDT, Jonas Kvinge <[email protected]> wrote:

Hi,
I'm trying to boot openSUSE Linux on an CM5 using a sourcekit io board
(https://sourcekit.cc/#/).
u-boot seem to be stuck with the logo on the upper right corner, no text.
I re-built u-boot using the latest source from git from the next branch and also set CONFIG_LOG in make menuconfig, but still no text.

Is the CM5 supported by u-boot?

Jonas

#4 lore raw

I've never heard of bcm7712, it's not
on https://github.com/raspberrypi/firmware/tree/master/boot
Or do you mean bcm2712?

I managed to get u-boot v2025.04 to load by setting boot delay to -2, same issue as described here:
https://lists.denx.de/pipermail/u-boot/2024-December/576043.html

What are the changes does the custodian version have that are needed? It seems like it's not up to date with the new version u-boot.

Jonas

Quoted 70 lines · Jojan


Master is ok. But it won’t work as is. You need to have rpi5 configuration and the dts files. I did it a year back. But since  did not have bcm7712 dts files, I took the dtb file from the raspberry pi images ( it has a pre built dtb file, and extracted dts)

dtc -I dtb -O dts -o <output.dts> -i< input.dtb>




 On Saturday, June 7, 2025 at 03:26:31 AM PDT, Jonas Kvinge <[email protected]> wrote:


Which branch? The master branch is 1 year old.

Quoted 40 lines · Jojan

You need to take raspberry  ( custodian version)

Making sure you're not a bot!

Making sure you're not a bot!


But it is still missing the device tree fro bcm7712 ( RPI 5 is bcm7712)
But you can Dow load the dtb file from the pre built dtb file from raspberry pi images

and  use those  device tree sources ( using a dtc )




 On Thursday, June 5, 2025 at 02:13:24 PM PDT, Jonas Kvinge <[email protected]> wrote:


Hi,
I'm trying to boot openSUSE Linux on an CM5 using a sourcekit io board
(https://sourcekit.cc/#/).
u-boot seem to be stuck with the logo on the upper right corner, no text.
I re-built u-boot using the latest source from git from the next branch
and also set CONFIG_LOG in make menuconfig, but still no text.

Quoted 5 lines

Is the CM5 supported by u-boot?

Jonas


#5 lore raw

Sorry I mean 2712Raspebrry -P 4 , that the U-boot support as of now includes , bcm2711.dtsi
bcm2711-rpi-4-b.dts:#include "bcm2711.dtsi"

However RPi-5 uses broadcom 2712 chips.These dts files are not available in u-boot.Howver you can get it from other places and modify / inroduce in your device tree source and configure correctly.

On Saturday, June 7, 2025 at 11:19:28 AM PDT, Jonas Kvinge <[email protected]> wrote:

I've never heard of bcm7712, it's not
on https://github.com/raspberrypi/firmware/tree/master/boot
Or do you mean bcm2712?

I managed to get u-boot v2025.04 to load  by setting boot delay to -2, same issue as described here:
https://lists.denx.de/pipermail/u-boot/2024-December/576043.html

What are the changes does the custodian version have that are needed? It seems like it's not up to date with the new version u-boot.

Jonas

Quoted 70 lines · Jojan


Master is ok. But it won’t work as is. You need to have rpi5 configuration and the dts files. I did it a year back. But since  did not have bcm7712 dts files, I took the dtb file from the raspberry pi images ( it has a pre built dtb file, and extracted dts)

dtc -I dtb -O dts -o <output.dts> -i< input.dtb>




 On Saturday, June 7, 2025 at 03:26:31 AM PDT, Jonas Kvinge <[email protected]> wrote:


Which branch? The master branch is 1 year old.

Quoted 40 lines · Jojan

You need to take raspberry  ( custodian version)

Making sure you're not a bot!

Making sure you're not a bot!


But it is still missing the device tree fro bcm7712 ( RPI 5 is bcm7712)
But you can Dow load the dtb file from the pre built dtb file from raspberry pi images

and  use those  device tree sources ( using a dtc )




 On Thursday, June 5, 2025 at 02:13:24 PM PDT, Jonas Kvinge <[email protected]> wrote:


Hi,
I'm trying to boot openSUSE Linux on an CM5 using a sourcekit io board
(https://sourcekit.cc/#/).
u-boot seem to be stuck with the logo on the upper right corner, no text.
I re-built u-boot using the latest source from git from the next branch
and also set CONFIG_LOG in make menuconfig, but still no text.

Quoted 5 lines

Is the CM5 supported by u-boot?

Jonas


#6 lore raw
Quoted 5 lines · Jojan

Sorry I mean 2712Raspebrry -P 4 , that the U-boot support as of now includes , bcm2711.dtsi
bcm2711-rpi-4-b.dts:#include "bcm2711.dtsi"

However RPi-5 uses broadcom 2712 chips.These dts files are not available in u-boot.Howver you can get it from other places and modify / inroduce in your device tree source and configure correctly.

By default it will use the DT passed from the previous firmware, the advantage of this is it deals with any of the overlays and other pieces applied.

Quoted 88 lines · Jonas Kvinge

I've never heard of bcm7712, it's not
on https://github.com/raspberrypi/firmware/tree/master/boot
Or do you mean bcm2712?

I managed to get u-boot v2025.04 to load by setting boot delay to -2, same issue as described here:
https://lists.denx.de/pipermail/u-boot/2024-December/576043.html

What are the changes does the custodian version have that are needed? It seems like it's not up to date with the new version u-boot.

Jonas

Quoted 70 lines · Jojan

Master is ok. But it won’t work as is. You need to have rpi5 configuration and the dts files. I did it a year back. But since did not have bcm7712 dts files, I took the dtb file from the raspberry pi images ( it has a pre built dtb file, and extracted dts)

dtc -I dtb -O dts -o <output.dts> -i< input.dtb>

On Saturday, June 7, 2025 at 03:26:31 AM PDT, Jonas Kvinge
<[email protected]> wrote:

Which branch? The master branch is 1 year old.

Quoted 45 lines · Jojan

You need to take raspberry ( custodian version)

Making sure you're not a bot!

Making sure you're not a bot!

But it is still missing the device tree fro bcm7712 ( RPI 5 is bcm7712)
But you can Dow load the dtb file from the pre built dtb file from raspberry pi images

and use those device tree sources ( using a dtc )

On Thursday, June 5, 2025 at 02:13:24 PM PDT, Jonas Kvinge
<[email protected]> wrote:

Hi,
I'm trying to boot openSUSE Linux on an CM5 using a sourcekit io board
(https://sourcekit.cc/#/).
u-boot seem to be stuck with the logo on the upper right corner, no text.
I re-built u-boot using the latest source from git from the next branch
and also set CONFIG_LOG in make menuconfig, but still no text.

Is the CM5 supported by u-boot?

Jonas