OMAP3: Display Support

This patch series adds the Display Support for OMAP3 platforms and the corresponding changes in the board files.

Version2:
- Optimised to configure INTBR from gpio to PWM1 mode setting and enabling of the PWM1 mode only when its not in PWM1 mode.

Kishore Y (2):
OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3
OMAP3: Enable display on ZOOM2/3/3630SDP

 arch/arm/mach-omap2/Makefile                  |    3 +
 arch/arm/mach-omap2/board-3630sdp.c           |    1 +
 arch/arm/mach-omap2/board-zoom-display.c      |  167 +++++++++++++++++++++++++
 arch/arm/mach-omap2/board-zoom-peripherals.c  |   49 +++++++-
 arch/arm/mach-omap2/board-zoom2.c             |    1 +
 arch/arm/mach-omap2/board-zoom3.c             |    1 +
 arch/arm/mach-omap2/include/mach/board-zoom.h |    2 +
 7 files changed, 222 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-zoom-display.c

From: Kishore Y <[email protected]>

Board-zoom-display.c added as a common file for display functionality on boards zoom2, zoom3 and 3630sdp.

---
 arch/arm/mach-omap2/Makefile                  |    3 +
 arch/arm/mach-omap2/board-zoom-display.c      |  168 +++++++++++++++++++++++++
 arch/arm/mach-omap2/board-zoom-peripherals.c  |   49 +++++++-
 arch/arm/mach-omap2/include/mach/board-zoom.h |    2 +
 4 files changed, 220 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-zoom-display.c

index 88d3a1e..95e0ecf 100644
@@ -132,16 +132,19 @@ obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
+					   board-zoom-display.o \
 					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
+					   board-zoom-display.o \
 					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
+					   board-zoom-display.o \
 					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \

index 3af69d2..8d8eeb2 100644
@@ -3,9 +3,11 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <plat/display.h>
 
 #define ZOOM_NAND_CS    0
 
 extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs);
 extern int __init zoom_debugboard_init(void);
 extern void __init zoom_peripherals_init(void);
+extern void __init zoom_display_init(void);

1.5.6.3

From: Kishore Y <[email protected]>

Enable Display on zoom2, zoom3 and 3630sdp boards.

---
 arch/arm/mach-omap2/board-3630sdp.c |    1 +
 arch/arm/mach-omap2/board-zoom2.c   |    1 +
 arch/arm/mach-omap2/board-zoom3.c   |    1 +
 3 files changed, 3 insertions(+), 0 deletions(-)

index b359c3f..d6ba94a 100644
@@ -210,6 +210,7 @@ static void __init omap_sdp_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	omap_serial_init();
 	zoom_peripherals_init();
+	zoom_display_init();
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();

index 3ad9ecf..1db4d95 100644
@@ -138,6 +138,7 @@ static void __init omap_zoom2_init(void)
 	board_nand_init(zoom_nand_partitions,
 			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
+	zoom_display_init();
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")

index 6ca0b83..6e012f6 100644
@@ -117,6 +117,7 @@ static void __init omap_zoom_init(void)
 	board_nand_init(zoom_nand_partitions,
 			 ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
+	zoom_display_init();
 
 	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
 	usb_ehci_init(&ehci_pdata);

1.5.6.3

Hi,

This patch set doesn't seem to apply to the latest kernel, conflicts in arch/arm/mach-omap2/board-zoom-peripherals.c and arch/arm/mach-omap2/include/mach/board-zoom.h. Can you rebase and resend?

Tomi

Sure,
Will rebase and post it out soon.
Warm Regards,
Samreen