Remove multiple uses of KERN_<level>

index 8ae808d..4640f72 100644
@@ -4037,7 +4037,7 @@ int mp_find_ioapic_pin(int ioapic, u32 gsi)
 static int bad_ioapic(unsigned long address)
 {
 	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+		printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded "
 		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
 		return 1;
 	}

index 80f9f36..97c5898 100644
@@ -1736,9 +1736,10 @@ static int __devinit eni_do_init(struct atm_dev *dev)
 		eprom = (base+EPROM_SIZE-sizeof(struct midway_eprom));
 		if (readl(&eprom->magic) != ENI155_MAGIC) {
 			printk("\n");
-			printk(KERN_ERR KERN_ERR DEV_LABEL "(itf %d): bad "
-			    "magic - expected 0x%x, got 0x%x\n",dev->number,
-			    ENI155_MAGIC,(unsigned) readl(&eprom->magic));
+			printk(KERN_ERR DEV_LABEL
+			       "(itf %d): bad magic - expected 0x%x, got 0x%x\n",
+			       dev->number, ENI155_MAGIC,
+			       (unsigned)readl(&eprom->magic));
 			error = -EINVAL;
 			goto unmap;
 		}

index bb0b365..3a1517a 100644
@@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
 
 		clear_bit(*old_keycode, dev->keybit);
 		set_bit(usage->code, dev->keybit);
-		dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+		dbg_hid("Assigned keycode %d to HID usage code %x\n",
 			usage->code, usage->hid);
 
 		/*

index 3b50954..0ebe4e8 100644
@@ -62,8 +62,8 @@ void c2_rnic_interrupt(struct c2_dev *c2dev)
 static void handle_mq(struct c2_dev *c2dev, u32 mq_index)
 {
 	if (c2dev->qptr_array[mq_index] == NULL) {
-		pr_debug(KERN_INFO "handle_mq: stray activity for mq_index=%d\n",
-			mq_index);
+		pr_debug("handle_mq: stray activity for mq_index=%d\n",
+			 mq_index);
 		return;
 	}
 

index 13c8887..d02dcc6 100644
@@ -1093,8 +1093,8 @@ static int tx_ack(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
 	PDBG("%s ep %p credits %u\n", __func__, ep, credits);
 
 	if (credits == 0) {
-		PDBG(KERN_ERR "%s 0 credit ack  ep %p state %u\n",
-			__func__, ep, state_read(&ep->com));
+		PDBG("%s 0 credit ack  ep %p state %u\n",
+		     __func__, ep, state_read(&ep->com));
 		return CPL_RET_BUF_DONE;
 	}
 

index 32d352a..8f812cf 100644
@@ -1762,8 +1762,8 @@ static int fw4_ack(struct c4iw_dev *dev, struct sk_buff *skb)
 	ep = lookup_tid(t, tid);
 	PDBG("%s ep %p tid %u credits %u\n", __func__, ep, ep->hwtid, credits);
 	if (credits == 0) {
-		PDBG(KERN_ERR "%s 0 credit ack ep %p tid %u state %u\n",
-			__func__, ep, ep->hwtid, state_read(&ep->com));
+		PDBG("%s 0 credit ack ep %p tid %u state %u\n",
+		     __func__, ep, ep->hwtid, state_read(&ep->com));
 		return 0;
 	}
 

index a9cf768..b77f999 100644
@@ -630,7 +630,7 @@ static void atp_complete_geyser_3_4(struct urb *urb)
 	/* Just update the base values (i.e. touchpad in untouched state) */
 	if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
 
-		dprintk(KERN_DEBUG "appletouch: updated base values\n");
+		dprintk("appletouch: updated base values\n");
 
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 		goto exit;

index 18db5a8..61ef34a 100644
@@ -10,6 +10,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>

@@ -225,8 +227,8 @@ static int i8042_flush(void)
 		udelay(50);
 		data = i8042_read_data();
 		i++;
-		dbg("%02x <- i8042 (flush, %s)", data,
-			str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (flush, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 	}
 
 	spin_unlock_irqrestore(&i8042_lock, flags);

@@ -253,32 +255,32 @@ static int __i8042_command(unsigned char *param, int command)
 	if (error)
 		return error;
 
-	dbg("%02x -> i8042 (command)", command & 0xff);
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
 		error = i8042_wait_write();
 		if (error)
 			return error;
-		dbg("%02x -> i8042 (parameter)", param[i]);
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
 		error = i8042_wait_read();
 		if (error) {
-			dbg("     -- i8042 (timeout)");
+			dbg("     -- i8042 (timeout)\n");
 			return error;
 		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			dbg("     -- i8042 (auxerr)");
+			dbg("     -- i8042 (auxerr)\n");
 			return -1;
 		}
 
 		param[i] = i8042_read_data();
-		dbg("%02x <- i8042 (return)", param[i]);
+		dbg("%02x <- i8042 (return)\n", param[i]);
 	}
 
 	return 0;

@@ -309,7 +311,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 	spin_lock_irqsave(&i8042_lock, flags);
 
 	if (!(retval = i8042_wait_write())) {
-		dbg("%02x -> i8042 (kbd-data)", c);
+		dbg("%02x -> i8042 (kbd-data)\n", c);
 		i8042_write_data(c);
 	}
 

@@ -355,17 +357,14 @@ static void i8042_port_close(struct serio *serio)
 
 	i8042_ctr &= ~irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING
-			"i8042.c: Can't write CTR while closing %s port.\n",
-			port_name);
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
 
 	udelay(50);
 
 	i8042_ctr &= ~disable_bit;
 	i8042_ctr |= irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
-			port_name);
+		pr_err("Can't reactivate %s port\n", port_name);
 
 	/*
 	 * See if there is any data appeared while we were messing with

@@ -456,7 +455,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
 		spin_unlock_irqrestore(&i8042_lock, flags);
-		if (irq) dbg("Interrupt %d, without any data", irq);
+		if (irq)
+			dbg("Interrupt %d, without any data\n", irq);
 		ret = 0;
 		goto out;
 	}

@@ -469,7 +469,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 
 		dfl = 0;
 		if (str & I8042_STR_MUXERR) {
-			dbg("MUX error, status is %02x, data is %02x", str, data);
+			dbg("MUX error, status is %02x, data is %02x\n",
+			    str, data);
 /*
  * When MUXERR condition is signalled the data register can only contain
  * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately

@@ -512,7 +513,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	port = &i8042_ports[port_no];
 	serio = port->exists ? port->serio : NULL;
 
-	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
 	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");

@@ -540,7 +541,7 @@ static int i8042_enable_kbd_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_KBDINT;
 		i8042_ctr |= I8042_CTR_KBDDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		pr_err("Failed to enable KBD port\n");
 		return -EIO;
 	}
 

@@ -559,7 +560,7 @@ static int i8042_enable_aux_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_AUXINT;
 		i8042_ctr |= I8042_CTR_AUXDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		pr_err("Failed to enable AUX port\n");
 		return -EIO;
 	}
 

@@ -641,7 +642,7 @@ static int __init i8042_check_mux(void)
 	if (i8042_set_mux_mode(true, &mux_version))
 		return -1;
 
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
 		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
 /*

@@ -651,7 +652,7 @@ static int __init i8042_check_mux(void)
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
+		pr_err("Failed to disable AUX port, can't use MUX\n");
 		return -EIO;
 	}
 

@@ -676,8 +677,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
-		dbg("%02x <- i8042 (aux_test_irq, %s)",
-			data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
 			complete(&i8042_aux_irq_delivered);

@@ -770,8 +771,8 @@ static int __init i8042_check_aux(void)
  */
 
 	if (i8042_toggle_aux(false)) {
-		printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
-		printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option.\n");
 	}
 
 	if (i8042_toggle_aux(true))

@@ -819,7 +820,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
-		dbg("     -- i8042 (aux irq test timeout)");
+		dbg("     -- i8042 (aux irq test timeout)\n");
 		i8042_flush();
 		retval = -1;
 	}

@@ -845,7 +846,7 @@ static int __init i8042_check_aux(void)
 static int i8042_controller_check(void)
 {
 	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
+		pr_err("No controller found\n");
 		return -ENODEV;
 	}
 

@@ -864,15 +865,15 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			pr_err("i8042 controller self test timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			param, I8042_RET_CTL_TEST);
+		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
+		       param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
 

@@ -883,8 +884,7 @@ static int i8042_controller_selftest(void)
 	 * and user will still get a working keyboard. This is especially
 	 * important on netbooks. On other arches we trust hardware more.
 	 */
-	printk(KERN_INFO
-		"i8042: giving up on controller selftest, continuing anyway...\n");
+	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
 	return -EIO;

@@ -909,8 +909,7 @@ static int i8042_controller_init(void)
 
 	do {
 		if (n >= 10) {
-			printk(KERN_ERR
-				"i8042.c: Unable to get stable CTR read.\n");
+			pr_err("Unable to get stable CTR read\n");
 			return -EIO;
 		}
 

@@ -918,8 +917,7 @@ static int i8042_controller_init(void)
 			udelay(50);
 
 		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
-			printk(KERN_ERR
-				"i8042.c: Can't read CTR while initializing i8042.\n");
+			pr_err("Can't read CTR while initializing i8042\n");
 			return -EIO;
 		}
 

@@ -943,7 +941,7 @@ static int i8042_controller_init(void)
 		if (i8042_unlock)
 			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
 		else
-			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+			pr_warn("Warning: Keylock active\n");
 	}
 	spin_unlock_irqrestore(&i8042_lock, flags);
 

@@ -970,7 +968,7 @@ static int i8042_controller_init(void)
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+		pr_err("Can't write CTR while initializing i8042\n");
 		return -EIO;
 	}
 

@@ -1000,7 +998,7 @@ static void i8042_controller_reset(void)
 	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+		pr_warn("Can't write CTR while resetting\n");
 
 /*
  * Disable MUX mode if present.

@@ -1021,7 +1019,7 @@ static void i8042_controller_reset(void)
  */
 
 	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+		pr_warn("Can't restore CTR\n");
 }
 
 

@@ -1045,14 +1043,14 @@ static long i8042_panic_blink(int state)
 	led = (state) ? 0x01 | 0x04 : 0;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
-	dbg("%02x -> i8042 (panic blink)", 0xed);
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
 	i8042_suppress_kbd_ack = 2;
 	i8042_write_data(0xed); /* set leds */
 	DELAY;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
 	DELAY;
-	dbg("%02x -> i8042 (panic blink)", led);
+	dbg("%02x -> i8042 (panic blink)\n", led);
 	i8042_write_data(led);
 	DELAY;
 	return delay;

@@ -1068,9 +1066,7 @@ static void i8042_dritek_enable(void)
 
 	error = i8042_command(&param, 0x1059);
 	if (error)
-		printk(KERN_WARNING
-			"Failed to enable DRITEK extension: %d\n",
-			error);
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
 }
 #endif
 

@@ -1105,10 +1101,10 @@ static int i8042_controller_resume(bool force_reset)
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+		pr_warn("Can't write CTR to resume, retrying...\n");
 		msleep(50);
 		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-			printk(KERN_ERR "i8042: CTR write retry failed\n");
+			pr_err("CTR write retry failed\n");
 			return -EIO;
 		}
 	}

@@ -1121,9 +1117,7 @@ static int i8042_controller_resume(bool force_reset)
 
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING
-				"i8042: failed to resume active multiplexor, "
-				"mouse won't work.\n");
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
 	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
 		i8042_enable_aux_port();
 

@@ -1268,7 +1262,7 @@ static void __init i8042_register_ports(void)
 
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
 		if (i8042_ports[i].serio) {
-			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+			pr_info("%s at %#lx,%#lx irq %d\n",
 				i8042_ports[i].serio->name,
 				(unsigned long) I8042_DATA_REG,
 				(unsigned long) I8042_COMMAND_REG,

index cbc1beb..f510950 100644
@@ -89,15 +89,20 @@
 #ifdef DEBUG
 static unsigned long i8042_start_time;
 #define dbg_init() do { i8042_start_time = jiffies; } while (0)
-#define dbg(format, arg...) 							\
-	do { 									\
-		if (i8042_debug)						\
-			printk(KERN_DEBUG __FILE__ ": " format " [%d]\n" ,	\
-	 			## arg, (int) (jiffies - i8042_start_time));	\
-	} while (0)
+#define dbg(format, arg...)						\
+do {									\
+	if (i8042_debug)						\
+		printk(KERN_DEBUG pr_fmt(format "[%d]"),		\
+		       ##arg, (int)(jiffies - i8042_start_time));	\
+} while (0)
+
 #else
 #define dbg_init() do { } while (0)
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...)						\
+do {									\
+	if (0)								\
+		printk(KERN_DEBUG pr_fmt(format), ##arg);		\
+} while (0)
 #endif
 
 #endif /* _I8042_H */

index 937e4b0..9883617 100644
@@ -52,13 +52,12 @@ static int max2165_write_reg(struct max2165_priv *priv, u8 reg, u8 data)
 	msg.addr = priv->config->i2c_address;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -EIO : 0;

@@ -78,14 +77,13 @@ static int max2165_read_reg(struct max2165_priv *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
+		dprintk("%s: reg=0x%02X, data=0x%02X\n",
 			__func__, reg, b1[0]);
 	return 0;
 }

index 43aac2f..1539ea1 100644
@@ -50,8 +50,7 @@ static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data)
 	msg2.addr = dev_addr;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%04X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1)

@@ -77,8 +76,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%04x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%04x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 

@@ -88,7 +86,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	*p_data = buf2[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
+		dprintk("%s: reg=0x%04X, data=0x%02X\n",
 			__func__, reg, buf2[0]);
 
 	return 0;

index 5ea28ae..8989f8f 100644
@@ -60,13 +60,12 @@ static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data)
 		msg.addr += 0x02;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -1 : 0;

@@ -91,15 +90,13 @@ static int lgs8gxx_read_reg(struct lgs8gxx_state *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -1;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, b1[0]);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, b1[0]);
 	return 0;
 }
 

index 0b336ca..f81a19f 100644
@@ -965,7 +965,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 		   an existing device. Weird...
 		   REVISIT: might no longer be needed */
 		rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
-		dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
+		dprintk("probe 0x%02x @ %s: %s\n",
 			msg_msi.addr, dev->i2c_adap.name,
 			(1 == rc) ? "yes" : "no");
 		break;

index 3e7d2fd..57e646b 100644
@@ -550,16 +550,16 @@ static int tvaudio_thread(void *data)
 		} else if (0 != dev->last_carrier) {
 			/* no carrier -- try last detected one as fallback */
 			carrier = dev->last_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [last detected]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [last detected]\n",
+				carrier/1000, carrier%1000);
 
 		} else {
 			/* no carrier + no fallback -- use default */
 			carrier = default_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [default]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [default]\n",
+				carrier/1000, carrier%1000);
 		}
 		tvaudio_setcarrier(dev,carrier,carrier);
 		dev->automute = 0;

index adedaa9..f8bed25 100644
@@ -1698,7 +1698,7 @@ int mvs_abort_task(struct sas_task *task)
 			struct task_status_struct *tstat;
 			u32 slot_idx = (u32)(slot - mvi->slot_info);
 			tstat = &task->task_status;
-			mv_dprintk(KERN_DEBUG "mv_abort_task() mvi=%p task=%p "
+			mv_dprintk("mv_abort_task() mvi=%p task=%p "
 				   "slot=%p slot_idx=x%x\n",
 				   mvi, task, slot, slot_idx);
 			tstat->stat = SAS_ABORTED_TASK;

index 7c316c3..b66d86a 100644
@@ -318,7 +318,7 @@ static long mddi_wait_interrupt_timeout(struct mddi_info *mddi,
 static void mddi_wait_interrupt(struct mddi_info *mddi, uint32_t intmask)
 {
 	if (mddi_wait_interrupt_timeout(mddi, intmask, HZ/10) == 0)
-		printk(KERN_INFO KERN_ERR "mddi_wait_interrupt %d, timeout "
+		printk(KERN_INFO "mddi_wait_interrupt %d, timeout "
 		       "waiting for %x, INT = %x, STAT = %x gotint = %x\n",
 		       current->pid, intmask, mddi_readl(INT), mddi_readl(STAT),
 		       mddi->got_int);

@@ -465,8 +465,7 @@ static int __init mddi_get_client_caps(struct mddi_info *mddi)
 
 		if (mddi->flags & FLAG_HAVE_CAPS)
 			break;
-		printk(KERN_INFO KERN_ERR "mddi_init, timeout waiting for "
-				"caps\n");
+		printk(KERN_INFO "mddi_init, timeout waiting for caps\n");
 	}
 	return mddi->flags & FLAG_HAVE_CAPS;
 }

index 2367fb3..a46a962 100644
@@ -7,6 +7,8 @@
  *
  */
 
+#define pr_fmt(fmt) "kdump: " fmt
+
 #include <linux/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/user.h>

@@ -506,8 +508,7 @@ static int __init parse_crash_elf64_headers(void)
 		ehdr.e_ehsize != sizeof(Elf64_Ehdr) ||
 		ehdr.e_phentsize != sizeof(Elf64_Phdr) ||
 		ehdr.e_phnum == 0) {
-		printk(KERN_WARNING "Warning: Core image elf header is not"
-					"sane\n");
+		pr_warn("Warning: Core image elf header is not sane\n");
 		return -EINVAL;
 	}
 

@@ -562,8 +563,7 @@ static int __init parse_crash_elf32_headers(void)
 		ehdr.e_ehsize != sizeof(Elf32_Ehdr) ||
 		ehdr.e_phentsize != sizeof(Elf32_Phdr) ||
 		ehdr.e_phnum == 0) {
-		printk(KERN_WARNING "Warning: Core image elf header is not"
-					"sane\n");
+		pr_warn("Warning: Core image elf header is not sane\n");
 		return -EINVAL;
 	}
 

@@ -606,8 +606,7 @@ static int __init parse_crash_elf_headers(void)
 	if (rc < 0)
 		return rc;
 	if (memcmp(e_ident, ELFMAG, SELFMAG) != 0) {
-		printk(KERN_WARNING "Warning: Core image elf header"
-					" not found\n");
+		pr_warn("Warning: Core image elf header not found\n");
 		return -EINVAL;
 	}
 

@@ -626,8 +625,7 @@ static int __init parse_crash_elf_headers(void)
 		/* Determine vmcore size. */
 		vmcore_size = get_vmcore_size_elf32(elfcorebuf);
 	} else {
-		printk(KERN_WARNING "Warning: Core image elf header is not"
-					" sane\n");
+		pr_warn("Warning: Core image elf header is not sane\n");
 		return -EINVAL;
 	}
 	return 0;

@@ -643,7 +641,7 @@ static int __init vmcore_init(void)
 		return rc;
 	rc = parse_crash_elf_headers();
 	if (rc) {
-		printk(KERN_WARNING "Kdump: vmcore not initialized\n");
+		pr_warn("vmcore not initialized\n");
 		return rc;
 	}