Skip to contentSkip to conversation

scsi-disk: Complete rerror/werror support

PATCH In review Kevin Wolf 2 participants 7 messages Oct 29, 2010 Block layer

lore
Share & tools
lore

Kevin Wolf

author
#0 lore raw

v2 cover scsi-disk: Complete rerror/werror support

SCSI disks currently only support werror for write requests. This series adds rerror for failed read requests and respects werror also for flushes.

v2:
- Addressed Stefan's comments on patch 1/4

Kevin Wolf (4):
scsi-disk: Implement rerror option
block: Allow bdrv_flush to return errors
scsi-disk: Complete failed requests in scsi_disk_emulate_command
scsi-disk: Implement werror for flushes

 block.c           |   21 +++++++--
 block.h           |    2 +-
 block/blkdebug.c  |    4 +-
 block/blkverify.c |    4 +-
 block/cow.c       |    4 +-
 block/qcow.c      |    4 +-
 block/qcow2.c     |    4 +-
 block/raw-posix.c |    4 +-
 block/raw-win32.c |    9 +++-
 block/raw.c       |    4 +-
 block/vdi.c       |    4 +-
 block/vmdk.c      |    4 +-
 block_int.h       |    2 +-
 blockdev.c        |    6 +-
 hw/scsi-disk.c    |  138 +++++++++++++++++++++++++++++++++++------------------
 15 files changed, 140 insertions(+), 74 deletions(-)
Signature · 1 line
1.7.2.3
author
#1 lore raw

PATCH v2 1/4 scsi-disk: Implement rerror option

This implements the rerror option for SCSI disks.

It also includes minor changes to the write path where the same code is used that was criticized in the review for the changes to the read path required for rerror support.

---
 blockdev.c     |    6 ++--
 hw/scsi-disk.c |  100 +++++++++++++++++++++++++++++++++++++-------------------
 2 files changed, 69 insertions(+), 37 deletions(-)
blockdev.c +3 -3
index ff7602b..6cb179a 100644
@@ -314,7 +314,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
     on_write_error = BLOCK_ERR_STOP_ENOSPC;
     if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
         if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type != IF_NONE) {
-            fprintf(stderr, "werror is no supported by this format\n");
+            fprintf(stderr, "werror is not supported by this format\n");
             return NULL;
         }
 
@@ -326,8 +326,8 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
 
     on_read_error = BLOCK_ERR_REPORT;
     if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
-        if (type != IF_IDE && type != IF_VIRTIO && type != IF_NONE) {
-            fprintf(stderr, "rerror is no supported by this format\n");
+        if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI && type != IF_NONE) {
+            fprintf(stderr, "rerror is not supported by this format\n");
             return NULL;
         }
 
hw/scsi-disk.c +66 -34

177 lines not on this page · raw message

Signature · 1 line
1.7.2.3
Reviewed-by on v2 1/4
#2 lore raw

[Qemu-devel] Re: [PATCH v2 1/4] scsi-disk: Implement rerror option

Quoted 11 lines · Kevin Wolf

This implements the rerror option for SCSI disks.

It also includes minor changes to the write path where the same code is used that was criticized in the review for the changes to the read path required for rerror support.

---
 blockdev.c     |    6 ++--
 hw/scsi-disk.c |  100 +++++++++++++++++++++++++++++++++++++-------------------

 2 files changed, 69 insertions(+), 37 deletions(-)

Looks good.

author
#3 lore raw

PATCH v2 2/4 block: Allow bdrv_flush to return errors

In reply to Kevin Wolf

This changes bdrv_flush to return 0 on success and -errno in case of failure. It's a requirement for implementing proper error handle in users of bdrv_flush.

---
 block.c           |   21 +++++++++++++++++----
 block.h           |    2 +-
 block/blkdebug.c  |    4 ++--
 block/blkverify.c |    4 ++--
 block/cow.c       |    4 ++--
 block/qcow.c      |    4 ++--
 block/qcow2.c     |    4 ++--
 block/raw-posix.c |    4 ++--
 block/raw-win32.c |    9 ++++++++-
 block/raw.c       |    4 ++--
 block/vdi.c       |    4 ++--
 block/vmdk.c      |    4 ++--
 block_int.h       |    2 +-
 13 files changed, 45 insertions(+), 25 deletions(-)
block.c +17 -4
index 985d0b7..6b505fb 100644
@@ -1453,14 +1453,27 @@ const char *bdrv_get_device_name(BlockDriverState *bs)
     return bs->device_name;
 }
 
-void bdrv_flush(BlockDriverState *bs)
+int bdrv_flush(BlockDriverState *bs)
 {
     if (bs->open_flags & BDRV_O_NO_FLUSH) {
-        return;
+        return 0;
+    }
+
+    if (bs->drv && bs->drv->bdrv_flush) {
+        return bs->drv->bdrv_flush(bs);
     }
 
-    if (bs->drv && bs->drv->bdrv_flush)
-        bs->drv->bdrv_flush(bs);
+    /*
+     * Some block drivers always operate in either writethrough or unsafe mode
+     * and don't support bdrv_flush therefore. Usually qemu doesn't know how
+     * the server works (because the behaviour is hardcoded or depends on
+     * server-side configuration), so we can't ensure that everything is safe
+     * on disk. Returning an error doesn't work because that would break guests
+     * even if the server operates in writethrough mode.
+     *
+     * Let's hope the user knows what he's doing.
+     */
+    return 0;
 }
 
 void bdrv_flush_all(void)
block.h +1 -1
index a4facf2..78ecfac 100644
@@ -142,7 +142,7 @@ BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
         BlockDriverCompletionFunc *cb, void *opaque);
 
 /* Ensure contents are flushed to disk.  */
-void bdrv_flush(BlockDriverState *bs);
+int bdrv_flush(BlockDriverState *bs);
 void bdrv_flush_all(void);
 void bdrv_close_all(void);
 
block/blkdebug.c +2 -2
index 4d6ff0a..cd9eb80 100644
@@ -397,9 +397,9 @@ static void blkdebug_close(BlockDriverState *bs)
     }
 }
 
-static void blkdebug_flush(BlockDriverState *bs)
+static int blkdebug_flush(BlockDriverState *bs)
 {
-    bdrv_flush(bs->file);
+    return bdrv_flush(bs->file);
 }
 
 static BlockDriverAIOCB *blkdebug_aio_flush(BlockDriverState *bs,
block/blkverify.c +2 -2
index b2a12fe..0a8d691 100644
@@ -116,12 +116,12 @@ static void blkverify_close(BlockDriverState *bs)
     s->test_file = NULL;
 }
 
-static void blkverify_flush(BlockDriverState *bs)
+static int blkverify_flush(BlockDriverState *bs)
 {
     BDRVBlkverifyState *s = bs->opaque;
 
     /* Only flush test file, the raw file is not important */
-    bdrv_flush(s->test_file);
+    return bdrv_flush(s->test_file);
 }
 
 static int64_t blkverify_getlength(BlockDriverState *bs)
block/cow.c +2 -2
index eedcc48..4cf543c 100644
@@ -282,9 +282,9 @@ exit:
     return ret;
 }
 
-static void cow_flush(BlockDriverState *bs)
+static int cow_flush(BlockDriverState *bs)
 {
-    bdrv_flush(bs->file);
+    return bdrv_flush(bs->file);
 }
 
 static QEMUOptionParameter cow_create_options[] = {
block/qcow.c +2 -2
index 816103d..9cd547d 100644
@@ -910,9 +910,9 @@ static int qcow_write_compressed(BlockDriverState *bs, int64_t sector_num,
     return 0;
 }
 
-static void qcow_flush(BlockDriverState *bs)
+static int qcow_flush(BlockDriverState *bs)
 {
-    bdrv_flush(bs->file);
+    return bdrv_flush(bs->file);
 }
 
 static BlockDriverAIOCB *qcow_aio_flush(BlockDriverState *bs,
block/qcow2.c +2 -2
index b816d87..537c479 100644
@@ -1148,9 +1148,9 @@ static int qcow_write_compressed(BlockDriverState *bs, int64_t sector_num,
     return 0;
 }
 
-static void qcow_flush(BlockDriverState *bs)
+static int qcow_flush(BlockDriverState *bs)
 {
-    bdrv_flush(bs->file);
+    return bdrv_flush(bs->file);
 }
 
 static BlockDriverAIOCB *qcow_aio_flush(BlockDriverState *bs,
block/raw-posix.c +2 -2
index d0393e0..d0960b8 100644
@@ -734,10 +734,10 @@ static int raw_create(const char *filename, QEMUOptionParameter *options)
     return result;
 }
 
-static void raw_flush(BlockDriverState *bs)
+static int raw_flush(BlockDriverState *bs)
 {
     BDRVRawState *s = bs->opaque;
-    qemu_fdatasync(s->fd);
+    return qemu_fdatasync(s->fd);
 }
 
 
block/raw-win32.c +8 -1
index 503ed39..7f32778 100644
@@ -150,7 +150,14 @@ static int raw_write(BlockDriverState *bs, int64_t sector_num,
 static void raw_flush(BlockDriverState *bs)
 {
     BDRVRawState *s = bs->opaque;
-    FlushFileBuffers(s->hfile);
+    int ret;
+
+    ret = FlushFileBuffers(s->hfile);
+    if (ret != 0) {
+        return -EIO;
+    }
+
+    return 0;
 }
 
 static void raw_close(BlockDriverState *bs)
block/raw.c +2 -2
index 9108779..1980deb 100644
@@ -39,9 +39,9 @@ static void raw_close(BlockDriverState *bs)
 {
 }
 
-static void raw_flush(BlockDriverState *bs)
+static int raw_flush(BlockDriverState *bs)
 {
-    bdrv_flush(bs->file);
+    return bdrv_flush(bs->file);
 }
 
 static BlockDriverAIOCB *raw_aio_flush(BlockDriverState *bs,
block/vdi.c +2 -2
index f72633c..3b51e53 100644
@@ -900,10 +900,10 @@ static void vdi_close(BlockDriverState *bs)
 {
 }
 
-static void vdi_flush(BlockDriverState *bs)
+static int vdi_flush(BlockDriverState *bs)
 {
     logout("\n");
-    bdrv_flush(bs->file);
+    return bdrv_flush(bs->file);
 }
 
 
block/vmdk.c +2 -2
index 2d4ba42..872aeba 100644
@@ -823,9 +823,9 @@ static void vmdk_close(BlockDriverState *bs)
     qemu_free(s->l2_cache);
 }
 
-static void vmdk_flush(BlockDriverState *bs)
+static int vmdk_flush(BlockDriverState *bs)
 {
-    bdrv_flush(bs->file);
+    return bdrv_flush(bs->file);
 }
 
 
block_int.h +1 -1
index 87e60b8..3c3adb5 100644
@@ -59,7 +59,7 @@ struct BlockDriver {
                       const uint8_t *buf, int nb_sectors);
     void (*bdrv_close)(BlockDriverState *bs);
     int (*bdrv_create)(const char *filename, QEMUOptionParameter *options);
-    void (*bdrv_flush)(BlockDriverState *bs);
+    int (*bdrv_flush)(BlockDriverState *bs);
     int (*bdrv_is_allocated)(BlockDriverState *bs, int64_t sector_num,
                              int nb_sectors, int *pnum);
     int (*bdrv_set_key)(BlockDriverState *bs, const char *key);
Signature · 1 line
1.7.2.3
author
#4 lore raw

PATCH v2 3/4 scsi-disk: Complete failed requests in scsi_disk_emulate_command

In reply to Kevin Wolf

This pulls the request completion for error cases from the caller to scsi_disk_emulate_command. This should not change semantics, but allows to reuse scsi_handle_write_error() for flushes in the next patch.

---
 hw/scsi-disk.c |   21 ++++++++++-----------
 1 files changed, 10 insertions(+), 11 deletions(-)
hw/scsi-disk.c +10 -11
index 43a5b59..96acfe3 100644
@@ -784,8 +784,9 @@ static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf)
     return toclen;
 }
 
-static int scsi_disk_emulate_command(SCSIRequest *req, uint8_t *outbuf)
+static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
 {
+    SCSIRequest *req = &r->req;
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
     uint64_t nb_sectors;
     int buflen = 0;
@@ -943,12 +944,12 @@ static int scsi_disk_emulate_command(SCSIRequest *req, uint8_t *outbuf)
     return buflen;
 
 not_ready:
-    scsi_req_set_status(req, CHECK_CONDITION, NOT_READY);
-    return 0;
+    scsi_command_complete(r, CHECK_CONDITION, NOT_READY);
+    return -1;
 
 illegal_request:
-    scsi_req_set_status(req, CHECK_CONDITION, ILLEGAL_REQUEST);
-    return 0;
+    scsi_command_complete(r, CHECK_CONDITION, ILLEGAL_REQUEST);
+    return -1;
 }
 
 /* Execute a scsi command.  Returns the length of the data expected by the
@@ -1056,14 +1057,12 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
     case REPORT_LUNS:
     case VERIFY:
     case REZERO_UNIT:
-        rc = scsi_disk_emulate_command(&r->req, outbuf);
-        if (rc > 0) {
-            r->iov.iov_len = rc;
-        } else {
-            scsi_req_complete(&r->req);
-            scsi_remove_request(r);
+        rc = scsi_disk_emulate_command(r, outbuf);
+        if (rc < 0) {
             return 0;
         }
+
+        r->iov.iov_len = rc;
         break;
     case READ_6:
     case READ_10:
Signature · 1 line
1.7.2.3
author
#5 lore raw

PATCH v2 4/4 scsi-disk: Implement werror for flushes

In reply to Kevin Wolf
---
 hw/scsi-disk.c |   17 ++++++++++++++++-
 1 files changed, 16 insertions(+), 1 deletions(-)
hw/scsi-disk.c +16 -1
index 96acfe3..6815239 100644
@@ -45,6 +45,7 @@ do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
 #define SCSI_REQ_STATUS_RETRY_TYPE_MASK 0x06
 #define SCSI_REQ_STATUS_RETRY_READ      0x00
 #define SCSI_REQ_STATUS_RETRY_WRITE     0x02
+#define SCSI_REQ_STATUS_RETRY_FLUSH     0x04
 
 typedef struct SCSIDiskState SCSIDiskState;
 
@@ -74,6 +75,7 @@ struct SCSIDiskState
 };
 
 static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
+static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf);
 
 static SCSIDiskReq *scsi_new_request(SCSIDiskState *s, uint32_t tag,
         uint32_t lun)
@@ -316,6 +318,8 @@ static void scsi_dma_restart_bh(void *opaque)
         r = DO_UPCAST(SCSIDiskReq, req, req);
         if (r->status & SCSI_REQ_STATUS_RETRY) {
             int status = r->status;
+            int ret;
+
             r->status &=
                 ~(SCSI_REQ_STATUS_RETRY | SCSI_REQ_STATUS_RETRY_TYPE_MASK);
 
@@ -326,6 +330,11 @@ static void scsi_dma_restart_bh(void *opaque)
             case SCSI_REQ_STATUS_RETRY_WRITE:
                 scsi_write_request(r);
                 break;
+            case SCSI_REQ_STATUS_RETRY_FLUSH:
+                ret = scsi_disk_emulate_command(r, r->iov.iov_base);
+                if (ret == 0) {
+                    scsi_command_complete(r, GOOD, NO_SENSE);
+                }
             }
         }
     }
@@ -790,6 +799,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
     uint64_t nb_sectors;
     int buflen = 0;
+    int ret;
 
     switch (req->cmd.buf[0]) {
     case TEST_UNIT_READY:
@@ -880,7 +890,12 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
         buflen = 8;
 	break;
     case SYNCHRONIZE_CACHE:
-        bdrv_flush(s->bs);
+        ret = bdrv_flush(s->bs);
+        if (ret < 0) {
+            if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_FLUSH)) {
+                return -1;
+            }
+        }
         break;
     case GET_CONFIGURATION:
         memset(outbuf, 0, 8);
Signature · 1 line
1.7.2.3
#6 lore raw
In reply to Kevin Wolf
Quoted 5 lines · Kevin Wolf

SCSI disks currently only support werror for write requests. This series adds rerror for failed read requests and respects werror also for flushes.

v2:
- Addressed Stefan's comments on patch 1/4

Looks good.

Stefan