omap3evm: move common config options to new file
RFC v2 2/3 omap3evm: move common config options to new file
This patch moves common config options to a new
file. Common options can now be included in other
board configs for this evm.
Signed-off-by Sanjeev Premi <[email protected]>
--- include/configs/omap3_evm.h | 210 ++-------------------------------- include/configs/omap3_evm_common.h | 226 ++++++++++++++++++++++++++++++++++++ 2 files changed, 234 insertions(+), 202 deletions(-) create mode 100644 include/configs/omap3_evm_common.h
include/configs/omap3_evm.h +8 -202
@@ -1,6 +1,8 @@/* -* (C) Copyright 2006-2008 -* Texas Instruments. +* Configuration settings for the TI OMAP3 EVM board. +* +* Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/ +* * Author : * Manikandan Pillai <[email protected]> * Derived from Beagle Board and 3430 SDP code by
@@ -9,8 +11,6 @@* * Manikandan Pillai <[email protected]> * -* Configuration settings for the TI OMAP3 EVM board. -* * See file CREDITS for list of people who contributed to this * project. *
@@ -30,192 +30,10 @@* MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __OMAP3EVM_CONFIG_H +#define __OMAP3EVM_CONFIG_H -/* -* High level configuration options -*/ -#define CONFIG_ARMV7 1/* This is an ARM V7 CPU core */ -#define CONFIG_OMAP 1/* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1/* which is a 34XX */ -#define CONFIG_OMAP3430 1/* which is in a 3430 */ -#define CONFIG_OMAP3_EVM 1/* working with EVM */ -#define CONFIG_SDRC 1/* chip has SDRC controller */ -#define CONFIG_OMAP3_MICRON_DDR 1 -#define CONFIG_TWL4030_POWER 1 - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap3.h> - -#undef CONFIG_USE_IRQ/* no support for IRQs */ - -/* -* Clock related definitions -*/ -#define V_OSCK 26000000/* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -/* -* OMAP3 has 12 GP timers, they can be driven by the system clock -* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). -* This rate is divided by a local divisor. -*/ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* -* Size of malloc() pool -*/ -#define CONFIG_ENV_SIZE (128 << 10)/* 128 KiB */ -/* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128/* bytes reserved for */ -/* initial data */ -/* -* Stack sizes -* -* The stack sizes are set up in start.S using the settings below -*/ -#define CONFIG_STACKSIZE (128 << 10)/* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10)/* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10)/* FIQ stack 4 KiB */ -#endif - -/* -* Physical Memory Map -* Note 1: CS1 may or may not be populated -* Note 2: SDRAM size is expected to be at least 32MB -*/ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* Limits for memtest */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000)/* 31MB */ -/* -* SDRAM Bank Allocation method -*/ -#define SDRC_R_B_C 1 - -/* -* Default load address -*/ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/* -* NS16550 Configuration -*/ -#define V_NS16550_CLK 48000000/* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* -* select serial console configuration -*/ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SERIAL1 1/* UART1 on OMAP3 EVM */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* -* Size of Console IO Buffer -*/ -#define CONFIG_SYS_CBSIZE 256 - -/* -* Size of print buffer -*/ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* -* Size of bootarg buffer -*/ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* -* I2C -*/ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 - -/* -* PISMO support -*/ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -/* Max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 520 - -/* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 - -#define CONFIG_SYS_FLASH_BASE boot_flash_base - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP -#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* Reserve 2 sectors */ - -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off -#define CONFIG_ENV_ADDR boot_flash_env_addr - -/* -* Start location of environment -*/ -#define ONENAND_ENV_OFFSET 0x260000 -#define SMNAND_ENV_OFFSET 0x260000 - -/* -* NAND -*/ -/* Physical address to access NAND */ -#define CONFIG_SYS_NAND_ADDR NAND_BASE - -/* Physical address to access NAND@CS0 */ -#define CONFIG_SYS_NAND_BASE NAND_BASE - -/* Max number of NAND devices */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* Timeout values (in ticks) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ - CONFIG_SYS_MAX_NAND_DEVICE) - -#define CONFIG_SYS_JFFS2_MEM_NAND -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* Start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -/* Size of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE 0xf980000 - -#define CONFIG_SYS_NO_FLASH +#include "omap3_evm_common.h" /* * MMC
@@ -264,22 +82,11 @@#endif /* CONFIG_USB_OMAP3 */ -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif -/* * U-boot features */ #define CONFIG_SYS_LONGHELP 1#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT "OMAP3_EVM # " -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_MAXARGS 16/* max args for a command */ #define CONFIG_DISPLAY_CPUINFO 1#define CONFIG_DISPLAY_BOARDINFO 1
@@ -346,7 +153,6 @@ extern unsigned int boot_flash_type;* Environment and boot command */ #define CONFIG_BOOTDELAY 10 -#define CONFIG_BOOTFILE uImage#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \
@@ -382,4 +188,4 @@ extern unsigned int boot_flash_type;"fi; " \ "else run nandboot; fi" -#endif /* __CONFIG_H */ +#endif /* __OMAP3EVM_CONFIG_H */
include/configs/omap3_evm_common.h new file +226 -0
226 lines not on this page · raw message
Signature · 1 line
1.7.2.2