Skip to contentSkip to conversation

usb: USB3.0 ch11 definitions

PATCH Superseded Tatyana Brokhman 1 participant 1 message Nov 1, 2010

Subsystems (2)
USB Arm Qualcomm mailing list

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Tatyana Brokhman

author
#0 lore raw

PATCH v5 1/3 usb: USB3.0 ch11 definitions

Adding hub SuperSpeed usb definitions as defined by ch10 of the USB3.0 spec.

Signed-off-by Tatyana Brokhman <[email protected]>
---
 include/linux/usb/ch11.h |   47 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/usb/hcd.h  |    4 +++
 2 files changed, 51 insertions(+), 0 deletions(-)
include/linux/usb/ch11.h +47 -0
index 119194c..10ec069 100644
@@ -28,6 +28,13 @@
 #define HUB_STOP_TT		11
 
 /*
+ * Hub class additional requests defined by USB 3.0 spec
+ * See USB 3.0 spec Table 10-6
+ */
+#define HUB_SET_DEPTH		12
+#define HUB_GET_PORT_ERR_COUNT	13
+
+/*
  * Hub Class feature numbers
  * See USB 2.0 spec Table 11-17
  */

@@ -56,6 +63,20 @@
 #define USB_PORT_FEAT_C_PORT_L1         23
 
 /*
+ * Port feature selectors added by USB 3.0 spec.
+ * See USB 3.0 spec Table 10-7
+ */
+#define USB_PORT_FEAT_LINK_STATE		5
+#define USB_PORT_FEAT_U1_TIMEOUT		23
+#define USB_PORT_FEAT_U2_TIMEOUT		24
+#define USB_PORT_FEAT_C_LINK_STATE		25
+#define USB_PORT_FEAT_C_CONFIG_ERR		26
+#define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
+#define USB_PORT_FEAT_BH_PORT_RESET		28
+#define USB_PORT_FEAT_C_BH_PORT_RESET		29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT	30
+
+/*
  * Hub Status and Hub Change results
  * See USB 2.0 spec Table 11-19 and Table 11-20
  */

@@ -84,6 +105,32 @@ struct usb_port_status {
 #define USB_PORT_STAT_SUPER_SPEED	0x8000	/* Linux-internal */
 
 /*
+ * Additions to wPortStatus bit field from USB 3.0
+ * See USB 3.0 spec Table 10-10
+ */
+#define USB_PORT_STAT_LINK_STATE	0x01e0
+#define USB_SS_PORT_STAT_POWER		0x0200
+#define USB_PORT_STAT_SPEED_5GBPS	0x0000
+/* Valid only if port is enabled */
+
+/*
+ * Definitions for PORT_LINK_STATE values
+ * (bits 5-8) in wPortStatus
+ */
+#define USB_SS_PORT_LS_U0		0x0000
+#define USB_SS_PORT_LS_U1		0x0020
+#define USB_SS_PORT_LS_U2		0x0040
+#define USB_SS_PORT_LS_U3		0x0060
+#define USB_SS_PORT_LS_SS_DISABLED	0x0080
+#define USB_SS_PORT_LS_RX_DETECT	0x00a0
+#define USB_SS_PORT_LS_SS_INACTIVE	0x00c0
+#define USB_SS_PORT_LS_POLLING		0x00e0
+#define USB_SS_PORT_LS_RECOVERY		0x0100
+#define USB_SS_PORT_LS_HOT_RESET	0x0120
+#define USB_SS_PORT_LS_COMP_MOD		0x0140
+#define USB_SS_PORT_LS_LOOPBACK		0x0160
+
+/*
  * wPortChange bit field
  * See USB 2.0 spec Table 11-22
  * Bits 0 to 4 shown, bits 5 to 15 are reserved
include/linux/usb/hcd.h +4 -0
index 3b571f1..d7738de 100644
@@ -469,6 +469,10 @@ extern void usb_ep0_reinit(struct usb_device *);
 
 /*-------------------------------------------------------------------------*/
 
+/* class requests from USB 3.0 hub spec, table 10-5 */
+#define SetHubDepth		(0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount	(0x8000 | HUB_GET_PORT_ERR_COUNT)
+
 /*
  * Generic bandwidth allocation constants/support
  */
Signature · 5 lines
1.6.3.3

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.