OMAP2: Devkit8000: Fix mmc regulator failure
Subsystems (3)
PATCH 1/1 OMAP2: Devkit8000: Fix mmc regulator failure
This patch fixes the following error:
Quoted 1 line
regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
standby
Quoted 2 lines
twl_regtwl_reg.6: can't register VMMC1, -22twl_reg: probe of twl_reg.6 failed with error -22
Signed-off-by Thomas Weber <[email protected]>
--- arch/arm/mach-omap2/board-devkit8000.c | 3 --- 1 files changed, 0 insertions(+), 3 deletions(-)
arch/arm/mach-omap2/board-devkit8000.c +0 -3
@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, mmc[0 ].gpio_cd = gpio +0 ;omap2_hsmmc_init (mmc); -/* link regulators to MMC adapters */ - devkit8000_vmmc1_supply.dev = mmc[0 ].dev; -/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2 ].gpio = gpio +TWL4030_GPIO_MAX +1 ;
Signature · 1 line
1.7.3.2
Tony Lindgren
maintainerQuoted 6 lines · Thomas Weber
This patch fixes the following error:
Quoted 1 line
regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
standby
Quoted 2 lines
twl_regtwl_reg.6: can't register VMMC1, -22twl_reg: probe of twl_reg.6 failed with error -22
Adding this into omap-fixes.
Tony
Quoted 22 lines
Signed-off-by Thomas Weber <[email protected]>--- arch/arm/mach-omap2/board-devkit8000.c | 3 --- 1 files changed, 0 insertions(+), 3 deletions(-)arch/arm/mach-omap2/board-devkit8000.c +0
-3@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, mmc[0 ].gpio_cd = gpio +0 ;omap2_hsmmc_init (mmc); -/* link regulators to MMC adapters */ - devkit8000_vmmc1_supply.dev = mmc[0 ].dev; -/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2 ].gpio = gpio +TWL4030_GPIO_MAX +1 ;Signature · 1 line
1.7.3.2