ARM: s3c2440: mini2440: Add support for new LCD's.
Subsystems (2)
PATCH 1/1 ARM: s3c2440: mini2440: Add support for new LCD's.
This patch add support for new mini2440 board LCD's:
3.5" TFT + TS (TD035STED4)
5.6" TFT (Innolux AT056TN52).
Code overtaken from mini2440 kernel:git://repo.or.cz/linux-2.6/mini2440.git
Signed-off-by Marek Belisko <[email protected]>
--- arch/arm/mach-s3c2440/mach-mini2440.c | 24 ++++++++++++++++++++++++ 1 files changed, 24 insertions(+), 0 deletions(-)
arch/arm/mach-s3c2440/mach-mini2440.c +24 -0
@@ -185,6 +185,30 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { .lcdcon5 = (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_HWSWP), }, + [3] = { /* mini2440 + 3.5" TFT + TS -- New model as Nov 2009 "T35" */ +_LCD_DECLARE ( +7 ,/* The 3.5 is quite fast */ +240 ,21 ,25 ,6 ,/* x timing */ +320 ,2 ,4 ,2 ,/* y timing */ + 40), /* refresh rate */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | +S3C2410_LCDCON5_INVVLINE | +S3C2410_LCDCON5_INVVFRAME | +S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_PWREN), + }, + [4] = { /* mini2440 + 5.6" TFT + touchscreen -- Innolux AT056TN52 */ +/* be sure the "power" jumper is set accordingly ! */ +_LCD_DECLARE ( +10 ,/* the 5.3" runs slower */ +640 ,41 ,68 ,22 ,/* x timing */ +480 ,26 ,6 ,2 ,/* y timing */ + 40), /* refresh rate */ + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | +S3C2410_LCDCON5_INVVLINE | +S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN), + }, };/* todo - put into gpio header */
Signature · 1 line
1.7.1