Skip to contentSkip to conversation

: hvmloader: fix off-by-one-bit error when initialising PCI devices

PATCH New Gianni Tedesco 1 participant 1 message Nov 10, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 : hvmloader: fix off-by-one-bit error when initialising PCI devices

hvmloader is responsible for - amoungst other things - initialising the PCI device BARs prior to loading the guest BIOS. The previous code only probed for devfn up to 128. The lower 3 bits are function IDs so this meant that only devices in slots 0-15 were actually being initialized.

tools/firmware/hvmloader/hvmloader.c +3 -3
diff -r 7188d1e4b0e1 tools/firmware/hvmloader/hvmloader.c
@@ -196,7 +196,7 @@ static void pci_setup(void)
     outb(0x4d1, (uint8_t)(PCI_ISA_IRQ_MASK >> 8));
 
     /* Scan the PCI bus and map resources. */
-    for ( devfn = 0; devfn < 128; devfn++ )
+    for ( devfn = 0; devfn < 256; devfn++ )
     {
         class     = pci_readw(devfn, PCI_CLASS_DEVICE);
         vendor_id = pci_readw(devfn, PCI_VENDOR_ID);
@@ -470,7 +470,7 @@ static int scan_etherboot_nic(uint32_t c
     uint16_t class, vendor_id, device_id;
     int rom_size = 0;
 
-    for ( devfn = 0; (devfn < 128) && !rom_size; devfn++ )
+    for ( devfn = 0; (devfn < 256) && !rom_size; devfn++ )
     {
         class     = pci_readw(devfn, PCI_CLASS_DEVICE);
         vendor_id = pci_readw(devfn, PCI_VENDOR_ID);
@@ -497,7 +497,7 @@ static int pci_load_option_roms(uint32_t
     uint16_t vendor_id, device_id;
     uint8_t devfn, class;
 
-    for ( devfn = 0; devfn < 128; devfn++ )
+    for ( devfn = 0; devfn < 256; devfn++ )
     {
         class     = pci_readb(devfn, PCI_CLASS_DEVICE + 1);
         vendor_id = pci_readw(devfn, PCI_VENDOR_ID);