Skip to contentSkip to conversation

x86: Remove old nmi_watchdog

PATCH Superseded Don Zickus 3 participants 10 messages Nov 12, 2010 – Nov 18, 2010

Subsystems (7)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Don Zickus

author
#0 lore raw

cover x86: Remove old nmi_watchdog

Ingo asked me to remove the old nmi_watchdog to minimize the amount of code duplication we have to do for recent fixes. All the functionality needed by the old nmi watchdog should be available in perf now.

This is done in two parts. The first part is simply remove the old code and leave stubs for the functions that were removed. This mimics the behaviour of the new nmi watchdog.

The second parts removes all the stub functions, which is probably a little more intrusive, but basically dead code anyway.

The only small piece left is the perf counter reservation code. That can't be removed until oprofile is modified to sit on top of perf (if that is possible).

Compile tested for 32/64 bit with the lockup detector turned on and off. Tested on 32/64 bit machines to make sure they still boot properly.

NOTE: This patch will clash with my nmi rewrite patch series. I don't which patch series will go in first. I can refresh either one once one of them is merged.

Don Zickus (2):
x86, nmi_watchdog: remove the old nmi_watchdog x86, nmi_watchdog: remove all stub function calls from old
nmi_watchdog

 arch/x86/include/asm/nmi.h             |   51 ---
 arch/x86/include/asm/smpboot_hooks.h   |    1 -
 arch/x86/include/asm/timer.h           |    6 -
 arch/x86/kernel/apic/Makefile          |    5 +-
 arch/x86/kernel/apic/apic.c            |   15 +-
 arch/x86/kernel/apic/hw_nmi.c          |   16 +-
 arch/x86/kernel/apic/io_apic.c         |   46 ---
 arch/x86/kernel/apic/nmi.c             |  567 ----------------------------
 arch/x86/kernel/cpu/perf_event.c       |    9 -
 arch/x86/kernel/cpu/perfctr-watchdog.c |  642 --------------------------------
 arch/x86/kernel/smpboot.c              |   11 -
 arch/x86/kernel/time.c                 |   18 -
 arch/x86/kernel/traps.c                |   11 -
 arch/x86/oprofile/nmi_timer_int.c      |    3 -
 drivers/acpi/acpica/nsinit.c           |    2 -
 drivers/watchdog/hpwdt.c               |    7 +-
 include/linux/nmi.h                    |    8 +-
 kernel/sysctl.c                        |   16 -
 18 files changed, 7 insertions(+), 1427 deletions(-)
 delete mode 100644 arch/x86/kernel/apic/nmi.c
Signature · 1 line
1.7.2.3
author
#1 lore raw

PATCH 1/2 x86, nmi_watchdog: remove the old nmi_watchdog

Now that we have a new nmi_watchdog that is more generic and sits on top of the perf subsystem, we really do not need the old nmi_watchdog any more.

In addition, the old nmi_watchdog doesn't really work if you are using the default clocksource, hpet. The old nmi_watchdog code relied on local apic interrupts to determine if the cpu is still alive. With hpet as the clocksource, these interrupts don't increment any more and the old nmi_watchdog triggers false postives.

This piece removes the old nmi_watchdog code and stubs out any variables and functions calls. The stubs are the same ones used by the new nmi_watchdog code, so it should be well tested.

---
 arch/x86/include/asm/nmi.h    |    4 -
 arch/x86/kernel/apic/Makefile |    5 +-
 arch/x86/kernel/apic/hw_nmi.c |    6 +-
 arch/x86/kernel/apic/nmi.c    |  567 -----------------------------------------
 arch/x86/kernel/traps.c       |    9 -
 include/linux/nmi.h           |    6 +-
 kernel/sysctl.c               |   16 --
 7 files changed, 5 insertions(+), 608 deletions(-)
 delete mode 100644 arch/x86/kernel/apic/nmi.c
arch/x86/include/asm/nmi.h +0 -4
index 932f0f8..33292ec 100644
@@ -17,9 +17,6 @@ int do_nmi_callback(struct pt_regs *regs, int cpu);
 
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
 extern int check_nmi_watchdog(void);
-#if !defined(CONFIG_LOCKUP_DETECTOR)
-extern int nmi_watchdog_enabled;
-#endif
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
@@ -30,7 +27,6 @@ extern void setup_apic_nmi_watchdog(void *);
 extern void stop_apic_nmi_watchdog(void *);
 extern void disable_timer_nmi_watchdog(void);
 extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
 extern void cpu_nmi_set_wd_enabled(void);
 
 extern atomic_t nmi_active;
arch/x86/kernel/apic/Makefile +1 -4
index 910f20b..3966b56 100644
@@ -3,10 +3,7 @@
 #
 
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
-ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y)
-obj-$(CONFIG_X86_LOCAL_APIC)	+= nmi.o
-endif
-obj-$(CONFIG_HARDLOCKUP_DETECTOR)	+= hw_nmi.o
+obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
arch/x86/kernel/apic/hw_nmi.c +3 -3
index cefd694..b68b174 100644
@@ -20,12 +20,14 @@
 /* For reliability, we're prepared to waste bits here. */
 static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
 
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
+#endif
 
-#ifdef ARCH_HAS_NMI_WATCHDOG
+#ifdef arch_trigger_all_cpu_backtrace
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
@@ -95,8 +97,6 @@ early_initcall(register_trigger_all_cpu_backtrace);
 #if defined(CONFIG_X86_LOCAL_APIC)
 unsigned int nmi_watchdog = NMI_NONE;
 EXPORT_SYMBOL(nmi_watchdog);
-void acpi_nmi_enable(void) { return; }
-void acpi_nmi_disable(void) { return; }
 #endif
 atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
 EXPORT_SYMBOL(nmi_active);
arch/x86/kernel/apic/nmi.c deleted +0 -567

567 lines not on this page · raw message

arch/x86/kernel/traps.c +0 -9
index cb838ca..db30d9c 100644
@@ -398,15 +398,6 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 							== NOTIFY_STOP)
 			return;
 
-#ifndef CONFIG_LOCKUP_DETECTOR
-		/*
-		 * Ok, so this is none of the documented NMI sources,
-		 * so it must be the NMI watchdog.
-		 */
-		if (nmi_watchdog_tick(regs, reason))
-			return;
-		if (!do_nmi_callback(regs, cpu))
-#endif /* !CONFIG_LOCKUP_DETECTOR */
 			unknown_nmi_error(reason, regs);
 #else
 		unknown_nmi_error(reason, regs);
include/linux/nmi.h +1 -5
index 06aab5e..0cb3e5c 100644
@@ -16,10 +16,7 @@
  */
 #ifdef ARCH_HAS_NMI_WATCHDOG
 #include <asm/nmi.h>
-extern void touch_nmi_watchdog(void);
-extern void acpi_nmi_disable(void);
-extern void acpi_nmi_enable(void);
-#else
+#endif
 #ifndef CONFIG_HARDLOCKUP_DETECTOR
 static inline void touch_nmi_watchdog(void)
 {
@@ -30,7 +27,6 @@ extern void touch_nmi_watchdog(void);
 #endif
 static inline void acpi_nmi_disable(void) { }
 static inline void acpi_nmi_enable(void) { }
-#endif
 
 /*
  * Create trigger_all_cpu_backtrace() out of the arch-provided
kernel/sysctl.c +0 -16
index c33a1ed..8236b9e 100644
@@ -737,22 +737,6 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &one,
 	},
 #endif
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
-	{
-		.procname       = "unknown_nmi_panic",
-		.data           = &unknown_nmi_panic,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,
-		.proc_handler   = proc_dointvec,
-	},
-	{
-		.procname       = "nmi_watchdog",
-		.data           = &nmi_watchdog_enabled,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,
-		.proc_handler   = proc_nmi_enabled,
-	},
-#endif
 #if defined(CONFIG_X86)
 	{
 		.procname	= "panic_on_unrecovered_nmi",
Signature · 1 line
1.7.2.3
#2 lore raw

[tip:perf/core] x86, nmi_watchdog: Remove the old nmi_watchdog

Commit-ID:  5f2b0ba4d94b3ac23cbc4b7f675d98eb677a760a
Gitweb:     http://git.kernel.org/tip/5f2b0ba4d94b3ac23cbc4b7f675d98eb677a760a
Author:     Don Zickus <[email protected]>
AuthorDate: Fri, 12 Nov 2010 11:22:23 -0500
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 18 Nov 2010 09:08:23 +0100

x86, nmi_watchdog: Remove the old nmi_watchdog

Now that we have a new nmi_watchdog that is more generic and sits on top of the perf subsystem, we really do not need the old nmi_watchdog any more.

In addition, the old nmi_watchdog doesn't really work if you are using the default clocksource, hpet. The old nmi_watchdog code relied on local apic interrupts to determine if the cpu is still alive. With hpet as the clocksource, these interrupts don't increment any more and the old nmi_watchdog triggers false postives.

This piece removes the old nmi_watchdog code and stubs out any variables and functions calls. The stubs are the same ones used by the new nmi_watchdog code, so it should be well tested.

LKML-Reference: <[email protected]>

---
 arch/x86/include/asm/nmi.h    |    4 -
 arch/x86/kernel/apic/Makefile |    5 +-
 arch/x86/kernel/apic/hw_nmi.c |    6 +-
 arch/x86/kernel/apic/nmi.c    |  567 -----------------------------------------
 arch/x86/kernel/traps.c       |    9 -
 include/linux/nmi.h           |    6 +-
 kernel/sysctl.c               |   16 --
 7 files changed, 5 insertions(+), 608 deletions(-)
arch/x86/include/asm/nmi.h +0 -4
index 932f0f8..33292ec 100644
@@ -17,9 +17,6 @@ int do_nmi_callback(struct pt_regs *regs, int cpu);
 
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
 extern int check_nmi_watchdog(void);
-#if !defined(CONFIG_LOCKUP_DETECTOR)
-extern int nmi_watchdog_enabled;
-#endif
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
@@ -30,7 +27,6 @@ extern void setup_apic_nmi_watchdog(void *);
 extern void stop_apic_nmi_watchdog(void *);
 extern void disable_timer_nmi_watchdog(void);
 extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
 extern void cpu_nmi_set_wd_enabled(void);
 
 extern atomic_t nmi_active;
arch/x86/kernel/apic/Makefile +1 -4
index 910f20b..3966b56 100644
@@ -3,10 +3,7 @@
 #
 
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
-ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y)
-obj-$(CONFIG_X86_LOCAL_APIC)	+= nmi.o
-endif
-obj-$(CONFIG_HARDLOCKUP_DETECTOR)	+= hw_nmi.o
+obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
arch/x86/kernel/apic/hw_nmi.c +3 -3
index cefd694..b68b174 100644
@@ -20,12 +20,14 @@
 /* For reliability, we're prepared to waste bits here. */
 static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
 
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
+#endif
 
-#ifdef ARCH_HAS_NMI_WATCHDOG
+#ifdef arch_trigger_all_cpu_backtrace
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
@@ -95,8 +97,6 @@ early_initcall(register_trigger_all_cpu_backtrace);
 #if defined(CONFIG_X86_LOCAL_APIC)
 unsigned int nmi_watchdog = NMI_NONE;
 EXPORT_SYMBOL(nmi_watchdog);
-void acpi_nmi_enable(void) { return; }
-void acpi_nmi_disable(void) { return; }
 #endif
 atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
 EXPORT_SYMBOL(nmi_active);
arch/x86/kernel/apic/nmi.c deleted +0 -567

567 lines not on this page · raw message

arch/x86/kernel/traps.c +0 -9
index cb838ca..db30d9c 100644
@@ -398,15 +398,6 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 							== NOTIFY_STOP)
 			return;
 
-#ifndef CONFIG_LOCKUP_DETECTOR
-		/*
-		 * Ok, so this is none of the documented NMI sources,
-		 * so it must be the NMI watchdog.
-		 */
-		if (nmi_watchdog_tick(regs, reason))
-			return;
-		if (!do_nmi_callback(regs, cpu))
-#endif /* !CONFIG_LOCKUP_DETECTOR */
 			unknown_nmi_error(reason, regs);
 #else
 		unknown_nmi_error(reason, regs);
include/linux/nmi.h +1 -5
index 06aab5e..0cb3e5c 100644
@@ -16,10 +16,7 @@
  */
 #ifdef ARCH_HAS_NMI_WATCHDOG
 #include <asm/nmi.h>
-extern void touch_nmi_watchdog(void);
-extern void acpi_nmi_disable(void);
-extern void acpi_nmi_enable(void);
-#else
+#endif
 #ifndef CONFIG_HARDLOCKUP_DETECTOR
 static inline void touch_nmi_watchdog(void)
 {
@@ -30,7 +27,6 @@ extern void touch_nmi_watchdog(void);
 #endif
 static inline void acpi_nmi_disable(void) { }
 static inline void acpi_nmi_enable(void) { }
-#endif
 
 /*
  * Create trigger_all_cpu_backtrace() out of the arch-provided
kernel/sysctl.c +0 -16
index b65bf63..ce33e2a 100644
@@ -746,22 +746,6 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &one,
 	},
 #endif
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
-	{
-		.procname       = "unknown_nmi_panic",
-		.data           = &unknown_nmi_panic,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,
-		.proc_handler   = proc_dointvec,
-	},
-	{
-		.procname       = "nmi_watchdog",
-		.data           = &nmi_watchdog_enabled,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,
-		.proc_handler   = proc_nmi_enabled,
-	},
-#endif
 #if defined(CONFIG_X86)
 	{
 		.procname	= "panic_on_unrecovered_nmi",
#3 lore raw

Re: [tip:perf/core] x86, nmi_watchdog: Remove the old nmi_watchdog

Quoted 737 lines · tip-bot for Don Zickus
Commit-ID:  5f2b0ba4d94b3ac23cbc4b7f675d98eb677a760a
Gitweb:     http://git.kernel.org/tip/5f2b0ba4d94b3ac23cbc4b7f675d98eb677a760a
Author:     Don Zickus <[email protected]>
AuthorDate: Fri, 12 Nov 2010 11:22:23 -0500
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 18 Nov 2010 09:08:23 +0100

x86, nmi_watchdog: Remove the old nmi_watchdog

Now that we have a new nmi_watchdog that is more generic and sits on top of the perf subsystem, we really do not need the old nmi_watchdog any more.

In addition, the old nmi_watchdog doesn't really work if you are using the default clocksource, hpet. The old nmi_watchdog code relied on local apic interrupts to determine if the cpu is still alive. With hpet as the clocksource, these interrupts don't increment any more and the old nmi_watchdog triggers false postives.

This piece removes the old nmi_watchdog code and stubs out any variables and functions calls. The stubs are the same ones used by the new nmi_watchdog code, so it should be well tested.

LKML-Reference: <[email protected]>

---
 arch/x86/include/asm/nmi.h    |    4 -
 arch/x86/kernel/apic/Makefile |    5 +-
 arch/x86/kernel/apic/hw_nmi.c |    6 +-
 arch/x86/kernel/apic/nmi.c    |  567 -----------------------------------------
 arch/x86/kernel/traps.c       |    9 -
 include/linux/nmi.h           |    6 +-
 kernel/sysctl.c               |   16 --
 7 files changed, 5 insertions(+), 608 deletions(-)
arch/x86/include/asm/nmi.h +0 -4
index 932f0f8..33292ec 100644
@@ -17,9 +17,6 @@ int do_nmi_callback(struct pt_regs *regs, int cpu);
 
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
 extern int check_nmi_watchdog(void);
-#if !defined(CONFIG_LOCKUP_DETECTOR)
-extern int nmi_watchdog_enabled;
-#endif
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
@@ -30,7 +27,6 @@ extern void setup_apic_nmi_watchdog(void *);
 extern void stop_apic_nmi_watchdog(void *);
 extern void disable_timer_nmi_watchdog(void);
 extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
 extern void cpu_nmi_set_wd_enabled(void);
 
 extern atomic_t nmi_active;
arch/x86/kernel/apic/Makefile +1 -4
index 910f20b..3966b56 100644
@@ -3,10 +3,7 @@
 #
 
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
-ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y)
-obj-$(CONFIG_X86_LOCAL_APIC)	+= nmi.o
-endif
-obj-$(CONFIG_HARDLOCKUP_DETECTOR)	+= hw_nmi.o
+obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
arch/x86/kernel/apic/hw_nmi.c +3 -3
index cefd694..b68b174 100644
@@ -20,12 +20,14 @@
 /* For reliability, we're prepared to waste bits here. */
 static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
 
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
+#endif
 
-#ifdef ARCH_HAS_NMI_WATCHDOG
+#ifdef arch_trigger_all_cpu_backtrace
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
@@ -95,8 +97,6 @@ early_initcall(register_trigger_all_cpu_backtrace);
 #if defined(CONFIG_X86_LOCAL_APIC)
 unsigned int nmi_watchdog = NMI_NONE;
 EXPORT_SYMBOL(nmi_watchdog);
-void acpi_nmi_enable(void) { return; }
-void acpi_nmi_disable(void) { return; }
 #endif
 atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
 EXPORT_SYMBOL(nmi_active);
arch/x86/kernel/apic/nmi.c deleted +0 -567
deleted file mode 100644
index c90041c..0000000
@@ -1,567 +0,0 @@
-/*
- *  NMI watchdog support on APIC systems
- *
- *  Started by Ingo Molnar <[email protected]>
- *
- *  Fixes:
- *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
- *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
- *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
- *  Pavel Machek and
- *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
- */
-
-#include <asm/apic.h>
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/percpu.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kernel_stat.h>
-#include <linux/kdebug.h>
-#include <linux/smp.h>
-
-#include <asm/i8259.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/timer.h>
-
-#include <asm/mce.h>
-
-#include <asm/mach_traps.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- *     be enabled
- *  0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
-
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-
-static int panic_on_timeout;
-
-static unsigned int nmi_hz = HZ;
-static DEFINE_PER_CPU(short, wd_enabled);
-static int endflag __initdata;
-
-static inline unsigned int get_nmi_count(int cpu)
-{
-	return per_cpu(irq_stat, cpu).__nmi_count;
-}
-
-static inline int mce_in_progress(void)
-{
-#if defined(CONFIG_X86_MCE)
-	return atomic_read(&mce_entry) > 0;
-#endif
-	return 0;
-}
-
-/*
- * Take the local apic timer and PIT/HPET into account. We don't
- * know which one is active, when we have highres/dyntick on
- */
-static inline unsigned int get_timer_irqs(int cpu)
-{
-	return per_cpu(irq_stat, cpu).apic_timer_irqs +
-		per_cpu(irq_stat, cpu).irq0_irqs;
-}
-
-#ifdef CONFIG_SMP
-/*
- * The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
-	local_irq_enable_in_hardirq();
-	/*
-	 * Intentionally don't use cpu_relax here. This is
-	 * to make sure that the performance counter really ticks,
-	 * even if there is a simulator or similar that catches the
-	 * pause instruction. On a real HT machine this is fine because
-	 * all other CPUs are busy with "useless" delay loops and don't
-	 * care if they get somewhat less cycles.
-	 */
-	while (endflag == 0)
-		mb();
-}
-#endif
-
-static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count)
-{
-	printk(KERN_CONT "\n");
-
-	printk(KERN_WARNING
-		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
-			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
-
-	printk(KERN_WARNING
-		"Please report this to bugzilla.kernel.org,\n");
-	printk(KERN_WARNING
-		"and attach the output of the 'dmesg' command.\n");
-
-	per_cpu(wd_enabled, cpu) = 0;
-	atomic_dec(&nmi_active);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-int __init check_nmi_watchdog(void)
-{
-	unsigned int *prev_nmi_count;
-	int cpu;
-
-	if (!nmi_watchdog_active() || !atomic_read(&nmi_active))
-		return 0;
-
-	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL);
-	if (!prev_nmi_count)
-		goto error;
-
-	printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
-#endif
-
-	for_each_possible_cpu(cpu)
-		prev_nmi_count[cpu] = get_nmi_count(cpu);
-	local_irq_enable();
-	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
-
-	for_each_online_cpu(cpu) {
-		if (!per_cpu(wd_enabled, cpu))
-			continue;
-		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
-			report_broken_nmi(cpu, prev_nmi_count);
-	}
-	endflag = 1;
-	if (!atomic_read(&nmi_active)) {
-		kfree(prev_nmi_count);
-		atomic_set(&nmi_active, -1);
-		goto error;
-	}
-	printk("OK.\n");
-
-	/*
-	 * now that we know it works we can reduce NMI frequency to
-	 * something more reasonable; makes a difference in some configs
-	 */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		nmi_hz = lapic_adjust_nmi_hz(1);
-
-	kfree(prev_nmi_count);
-	return 0;
-error:
-	if (nmi_watchdog == NMI_IO_APIC) {
-		if (!timer_through_8259)
-			legacy_pic->mask(0);
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-	}
-
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-	return -1;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
-	unsigned int nmi;
-
-	if (!strncmp(str, "panic", 5)) {
-		panic_on_timeout = 1;
-		str = strchr(str, ',');
-		if (!str)
-			return 1;
-		++str;
-	}
-
-	if (!strncmp(str, "lapic", 5))
-		nmi_watchdog = NMI_LOCAL_APIC;
-	else if (!strncmp(str, "ioapic", 6))
-		nmi_watchdog = NMI_IO_APIC;
-	else {
-		get_option(&str, &nmi);
-		if (nmi >= NMI_INVALID)
-			return 0;
-		nmi_watchdog = nmi;
-	}
-
-	return 1;
-}
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-/*
- * Suspend/resume support
- */
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	nmi_pm_active = atomic_read(&nmi_active);
-	stop_apic_nmi_watchdog(NULL);
-	BUG_ON(atomic_read(&nmi_active) != 0);
-	return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	if (nmi_pm_active > 0) {
-		setup_apic_nmi_watchdog(NULL);
-		touch_nmi_watchdog();
-	}
-	return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
-	.name		= "lapic_nmi",
-	.resume		= lapic_nmi_resume,
-	.suspend	= lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
-	.id	= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
-	int error;
-
-	/*
-	 * should really be a BUG_ON but b/c this is an
-	 * init call, it just doesn't work.  -dcz
-	 */
-	if (nmi_watchdog != NMI_LOCAL_APIC)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0)
-		return 0;
-
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic_nmi);
-	return error;
-}
-
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif	/* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 1);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-}
-
-/*
- * This function is called as soon the LAPIC NMI watchdog driver has everything
- * in place and it's ready to check if the NMIs belong to the NMI watchdog
- */
-void cpu_nmi_set_wd_enabled(void)
-{
-	__get_cpu_var(wd_enabled) = 1;
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
-	if (__get_cpu_var(wd_enabled))
-		return;
-
-	/* cheap hack to support suspend/resume */
-	/* if cpu0 is not active neither should the other cpus */
-	if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
-		return;
-
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		if (lapic_watchdog_init(nmi_hz) < 0) {
-			__get_cpu_var(wd_enabled) = 0;
-			return;
-		}
-		/* FALL THROUGH */
-	case NMI_IO_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		atomic_inc(&nmi_active);
-	}
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
-	/* only support LOCAL and IO APICs for now */
-	if (!nmi_watchdog_active())
-		return;
-	if (__get_cpu_var(wd_enabled) == 0)
-		return;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		lapic_watchdog_stop();
-	else
-		__acpi_nmi_disable(NULL);
-	__get_cpu_var(wd_enabled) = 0;
-	atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up here too!]
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(long, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
-	if (nmi_watchdog_active()) {
-		unsigned cpu;
-
-		/*
-		 * Tell other CPUs to reset their alert counters. We cannot
-		 * do it ourselves because the alert count increase is not
-		 * atomic.
-		 */
-		for_each_present_cpu(cpu) {
-			if (per_cpu(nmi_touch, cpu) != 1)
-				per_cpu(nmi_touch, cpu) = 1;
-		}
-	}
-
-	/*
-	 * Tickle the softlockup detector too:
-	 */
-	touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-	/*
-	 * Since current_thread_info()-> is always on the stack, and we
-	 * always switch the stack NMI-atomically, it's safe to use
-	 * smp_processor_id().
-	 */
-	unsigned int sum;
-	int touched = 0;
-	int cpu = smp_processor_id();
-	int rc = 0;
-
-	sum = get_timer_irqs(cpu);
-
-	if (__get_cpu_var(nmi_touch)) {
-		__get_cpu_var(nmi_touch) = 0;
-		touched = 1;
-	}
-
-	/* We can be called before check_nmi_watchdog, hence NULL check. */
-	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
-		static DEFINE_RAW_SPINLOCK(lock); /* Serialise the printks */
-
-		raw_spin_lock(&lock);
-		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
-		show_regs(regs);
-		dump_stack();
-		raw_spin_unlock(&lock);
-		cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
-
-		rc = 1;
-	}
-
-	/* Could check oops_in_progress here too, but it's safer not to */
-	if (mce_in_progress())
-		touched = 1;
-
-	/* if the none of the timers isn't firing, this cpu isn't doing much */
-	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
-		/*
-		 * Ayiee, looks like this CPU is stuck ...
-		 * wait a few IRQs (5 seconds) before doing the oops ...
-		 */
-		__this_cpu_inc(alert_counter);
-		if (__this_cpu_read(alert_counter) == 5 * nmi_hz)
-			/*
-			 * die_nmi will return ONLY if NOTIFY_STOP happens..
-			 */
-			die_nmi("BUG: NMI Watchdog detected LOCKUP",
-				regs, panic_on_timeout);
-	} else {
-		__get_cpu_var(last_irq_sum) = sum;
-		__this_cpu_write(alert_counter, 0);
-	}
-
-	/* see if the nmi watchdog went off */
-	if (!__get_cpu_var(wd_enabled))
-		return rc;
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		rc |= lapic_wd_event(nmi_hz);
-		break;
-	case NMI_IO_APIC:
-		/*
-		 * don't know how to accurately check for this.
-		 * just assume it was a watchdog timer interrupt
-		 * This matches the old behaviour.
-		 */
-		rc = 1;
-		break;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYSCTL
-
-static void enable_ioapic_nmi_watchdog_single(void *unused)
-{
-	__get_cpu_var(wd_enabled) = 1;
-	atomic_inc(&nmi_active);
-	__acpi_nmi_enable(NULL);
-}
-
-static void enable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(enable_ioapic_nmi_watchdog_single, NULL, 1);
-	touch_nmi_watchdog();
-}
-
-static void disable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
-}
-
-static int __init setup_unknown_nmi_panic(char *str)
-{
-	unknown_nmi_panic = 1;
-	return 1;
-}
-__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
-	unsigned char reason = get_nmi_reason();
-	char buf[64];
-
-	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(buf, regs, 1); /* Always panic here */
-	return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write,
-			void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int old_state;
-
-	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
-	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, buffer, length, ppos);
-	if (!!old_state == !!nmi_watchdog_enabled)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) {
-		printk(KERN_WARNING
-			"NMI watchdog is permanently disabled\n");
-		return -EIO;
-	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_lapic_nmi_watchdog();
-		else
-			disable_lapic_nmi_watchdog();
-	} else if (nmi_watchdog == NMI_IO_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_ioapic_nmi_watchdog();
-		else
-			disable_ioapic_nmi_watchdog();
-	} else {
-		printk(KERN_WARNING
-			"NMI watchdog doesn't know what hardware to touch\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-#endif /* CONFIG_SYSCTL */
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
-	if (unknown_nmi_panic)
-		return unknown_nmi_panic_callback(regs, cpu);
-#endif
-	return 0;
-}
-
-void arch_trigger_all_cpu_backtrace(void)
-{
-	int i;
-
-	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
-
-	printk(KERN_INFO "sending NMI to all CPUs:\n");
-	apic->send_IPI_all(NMI_VECTOR);
-
-	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(to_cpumask(backtrace_mask)))
-			break;
-		mdelay(1);
-	}
-}
arch/x86/kernel/traps.c +0 -9
index cb838ca..db30d9c 100644
@@ -398,15 +398,6 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 							== NOTIFY_STOP)
 			return;
 
-#ifndef CONFIG_LOCKUP_DETECTOR
-		/*
-		 * Ok, so this is none of the documented NMI sources,
-		 * so it must be the NMI watchdog.
-		 */
-		if (nmi_watchdog_tick(regs, reason))
-			return;
-		if (!do_nmi_callback(regs, cpu))
-#endif /* !CONFIG_LOCKUP_DETECTOR */
 			unknown_nmi_error(reason, regs);
 #else
 		unknown_nmi_error(reason, regs);
include/linux/nmi.h +1 -5
index 06aab5e..0cb3e5c 100644
@@ -16,10 +16,7 @@
  */
 #ifdef ARCH_HAS_NMI_WATCHDOG
 #include <asm/nmi.h>
-extern void touch_nmi_watchdog(void);
-extern void acpi_nmi_disable(void);
-extern void acpi_nmi_enable(void);
-#else
+#endif
 #ifndef CONFIG_HARDLOCKUP_DETECTOR
 static inline void touch_nmi_watchdog(void)
 {
@@ -30,7 +27,6 @@ extern void touch_nmi_watchdog(void);
 #endif
 static inline void acpi_nmi_disable(void) { }
 static inline void acpi_nmi_enable(void) { }
-#endif
 
 /*
  * Create trigger_all_cpu_backtrace() out of the arch-provided
kernel/sysctl.c +0 -6
index b65bf63..ce33e2a 100644
@@ -746,22 +746,6 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &one,
 	},
 #endif
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
-	{
-		.procname       = "unknown_nmi_panic",
-		.data           = &unknown_nmi_panic,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,

kernel/sysctl.c static struct ctl_table kern_table[] = { · line 764

Quoted 10 lines
kernel/sysctl.c +0 -10
-		.proc_handler   = proc_dointvec,
-	},
-	{
-		.procname       = "nmi_watchdog",
-		.data           = &nmi_watchdog_enabled,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,
-		.proc_handler   = proc_nmi_enabled,
-	},
-#endif

Please update the kernel-parameters.txt accordingly.

and you need to keep unknown_nmi_panic or else as early_param().

Also any corresponding part like "nmi_watchdog=off" ?

Thanks

Yinghai Lu

Quoted 7 lines
kernel/sysctl.c +0 -1
 #if defined(CONFIG_X86)
 	{
 		.procname	= "panic_on_unrecovered_nmi",
--

To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw

Re: [tip:perf/core] x86, nmi_watchdog: Remove the old nmi_watchdog

Quoted 30 lines · Yinghai Lu
Quoted 15 lines · tip-bot for Don Zickus

* Create trigger_all_cpu_backtrace() out of the arch-provided

kernel/sysctl.c +0 -6
index b65bf63..ce33e2a 100644
@@ -746,22 +746,6 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &one,
 	},
 #endif
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
-	{
-		.procname       = "unknown_nmi_panic",
-		.data           = &unknown_nmi_panic,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,

kernel/sysctl.c static struct ctl_table kern_table[] = { · line 764

Quoted 10 lines
kernel/sysctl.c +0 -10
-		.proc_handler   = proc_dointvec,
-	},
-	{
-		.procname       = "nmi_watchdog",
-		.data           = &nmi_watchdog_enabled,
-		.maxlen         = sizeof (int),
-		.mode           = 0644,
-		.proc_handler   = proc_nmi_enabled,
-	},
-#endif

Please update the kernel-parameters.txt accordingly.

Quoted 4 lines

and you need to keep unknown_nmi_panic or else as early_param().

Also any corresponding part like "nmi_watchdog=off" ?

also you have some other left-over...

Documentation/kernel-parameters.txt: unknown_nmi_panic
Documentation/kernel-parameters.txt: Set unknown_nmi_panic=1 early on boot.
Documentation/sysctl/kernel.txt:- unknown_nmi_panic Documentation/sysctl/kernel.txt:unknown_nmi_panic:
arch/x86/include/asm/nmi.h:extern int unknown_nmi_panic; arch/x86/kernel/apic/hw_nmi.c:int unknown_nmi_panic;
kernel/sysctl_binary.c: { CTL_INT, KERN_UNKNOWN_NMI_PANIC, "unknown_nmi_panic" },

may still have left for nmi_watchdog too.

Yinghai

author
#5 lore raw

Re: [tip:perf/core] x86, nmi_watchdog: Remove the old nmi_watchdog

Quoted 18 lines · Yinghai Lu
Quoted 7 lines

Please update the kernel-parameters.txt accordingly.

and you need to keep unknown_nmi_panic or else as early_param().

Also any corresponding part like "nmi_watchdog=off" ?

also you have some other left-over...

Documentation/kernel-parameters.txt: unknown_nmi_panic
Documentation/kernel-parameters.txt: Set unknown_nmi_panic=1 early on boot.
Documentation/sysctl/kernel.txt:- unknown_nmi_panic Documentation/sysctl/kernel.txt:unknown_nmi_panic:
arch/x86/include/asm/nmi.h:extern int unknown_nmi_panic; arch/x86/kernel/apic/hw_nmi.c:int unknown_nmi_panic;
kernel/sysctl_binary.c: { CTL_INT, KERN_UNKNOWN_NMI_PANIC, "unknown_nmi_panic" },

Quoted 1 line

may still have left for nmi_watchdog too.

Yes the first part of the patch left in stubs. The second piece should clean up stuff like nmi_watchdog.

On the other side unknown_nmi_panic is actually going to be added back in with another patch that re-arranges the default_do_nmi() call that I posted in another patch series.

Cheers,
Don

#6 lore raw

Re: [tip:perf/core] x86, nmi_watchdog: Remove the old nmi_watchdog

Quoted 19 lines · Don Zickus
Quoted 18 lines · Yinghai Lu
Quoted 7 lines

Please update the kernel-parameters.txt accordingly.

and you need to keep unknown_nmi_panic or else as early_param().

Also any corresponding part like "nmi_watchdog=off" ?

also you have some other left-over...

Documentation/kernel-parameters.txt: unknown_nmi_panic
Documentation/kernel-parameters.txt: Set unknown_nmi_panic=1 early on boot.
Documentation/sysctl/kernel.txt:- unknown_nmi_panic Documentation/sysctl/kernel.txt:unknown_nmi_panic:
arch/x86/include/asm/nmi.h:extern int unknown_nmi_panic; arch/x86/kernel/apic/hw_nmi.c:int unknown_nmi_panic;
kernel/sysctl_binary.c: { CTL_INT, KERN_UNKNOWN_NMI_PANIC, "unknown_nmi_panic" },

Quoted 8 lines
Quoted 1 line

may still have left for nmi_watchdog too.

Yes the first part of the patch left in stubs. The second piece should clean up stuff like nmi_watchdog.

On the other side unknown_nmi_panic is actually going to be added back in with another patch that re-arranges the default_do_nmi() call that I posted in another patch series.

those patches that you reposted from Huang Ying?

it seems there still have some arguments about that patchset. if that would take a while to get in. Can you have a simple one to add back unknown_nmi_panic and nmi_watchdog=0 to early_param and sysctl?

Yinghai

author
#7 lore raw

PATCH 2/2 x86, nmi_watchdog: remove all stub function calls from old nmi_watchdog

In reply to Don Zickus

Now that the bulk of the old nmi_watchdog is gone, remove all the stub variables and hooks associated with it.

This touches lots of files mainly because of how the io_apic nmi_watchdog was implemented. Now that the io_apic nmi_watchdog is forever gone, remove all its fingers.

Most of this code was not being exercised by virtue of nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to risky here.

---
 arch/x86/include/asm/nmi.h             |   47 ---
 arch/x86/include/asm/smpboot_hooks.h   |    1 -
 arch/x86/include/asm/timer.h           |    6 -
 arch/x86/kernel/apic/apic.c            |   15 +-
 arch/x86/kernel/apic/hw_nmi.c          |   10 -
 arch/x86/kernel/apic/io_apic.c         |   46 ---
 arch/x86/kernel/cpu/perf_event.c       |    9 -
 arch/x86/kernel/cpu/perfctr-watchdog.c |  642 --------------------------------
 arch/x86/kernel/smpboot.c              |   11 -
 arch/x86/kernel/time.c                 |   18 -
 arch/x86/kernel/traps.c                |    2 -
 arch/x86/oprofile/nmi_timer_int.c      |    3 -
 drivers/acpi/acpica/nsinit.c           |    2 -
 drivers/watchdog/hpwdt.c               |    7 +-
 include/linux/nmi.h                    |    2 -
 15 files changed, 2 insertions(+), 819 deletions(-)
arch/x86/include/asm/nmi.h +0 -47
index 33292ec..3545838 100644
@@ -7,35 +7,13 @@
 
 #ifdef ARCH_HAS_NMI_WATCHDOG
 
-/**
- * do_nmi_callback
- *
- * Check to see if a callback exists and execute it.  Return 1
- * if the handler exists and was handled successfully.
- */
-int do_nmi_callback(struct pt_regs *regs, int cpu);
-
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-extern int check_nmi_watchdog(void);
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
 extern int reserve_evntsel_nmi(unsigned int);
 extern void release_evntsel_nmi(unsigned int);
 
-extern void setup_apic_nmi_watchdog(void *);
-extern void stop_apic_nmi_watchdog(void *);
-extern void disable_timer_nmi_watchdog(void);
-extern void enable_timer_nmi_watchdog(void);
-extern void cpu_nmi_set_wd_enabled(void);
-
-extern atomic_t nmi_active;
-extern unsigned int nmi_watchdog;
-#define NMI_NONE	0
-#define NMI_IO_APIC	1
-#define NMI_LOCAL_APIC	2
-#define NMI_INVALID	3
-
 struct ctl_table;
 extern int proc_nmi_enabled(struct ctl_table *, int ,
 			void __user *, size_t *, loff_t *);
@@ -43,33 +21,8 @@ extern int unknown_nmi_panic;
 
 void arch_trigger_all_cpu_backtrace(void);
 #define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
-
-static inline void localise_nmi_watchdog(void)
-{
-	if (nmi_watchdog == NMI_IO_APIC)
-		nmi_watchdog = NMI_LOCAL_APIC;
-}
-
-/* check if nmi_watchdog is active (ie was specified at boot) */
-static inline int nmi_watchdog_active(void)
-{
-	/*
-	 * actually it should be:
-	 * 	return (nmi_watchdog == NMI_LOCAL_APIC ||
-	 * 		nmi_watchdog == NMI_IO_APIC)
-	 * but since they are power of two we could use a
-	 * cheaper way --cvg
-	 */
-	return nmi_watchdog & (NMI_LOCAL_APIC | NMI_IO_APIC);
-}
 #endif
 
-void lapic_watchdog_stop(void);
-int lapic_watchdog_init(unsigned nmi_hz);
-int lapic_wd_event(unsigned nmi_hz);
-unsigned lapic_adjust_nmi_hz(unsigned hz);
-void disable_lapic_nmi_watchdog(void);
-void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
 void restart_nmi(void);
 
arch/x86/include/asm/smpboot_hooks.h +0 -1
index 1def601..6c22bf3 100644
@@ -48,7 +48,6 @@ static inline void __init smpboot_setup_io_apic(void)
 		setup_IO_APIC();
 	else {
 		nr_ioapics = 0;
-		localise_nmi_watchdog();
 	}
 #endif
 }
arch/x86/include/asm/timer.h +0 -6
index 5469630..fa7b917 100644
@@ -10,12 +10,6 @@
 unsigned long long native_sched_clock(void);
 extern int recalibrate_cpu_khz(void);
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-extern int timer_ack;
-#else
-# define timer_ack (0)
-#endif
-
 extern int no_timer_check;
 
 /* Accelerators for sched_clock()
arch/x86/kernel/apic/apic.c +1 -14
index 850657d..c4dafc0 100644
@@ -31,7 +31,6 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/dmi.h>
-#include <linux/nmi.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
 
@@ -800,11 +799,7 @@ void __init setup_boot_APIC_clock(void)
 	 * PIT/HPET going.  Otherwise register lapic as a dummy
 	 * device.
 	 */
-	if (nmi_watchdog != NMI_IO_APIC)
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-	else
-		pr_warning("APIC timer registered as dummy,"
-			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+	lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
 
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
@@ -1388,7 +1383,6 @@ void __cpuinit end_local_APIC_setup(void)
 	}
 #endif
 
-	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
 }
 
@@ -1751,17 +1745,10 @@ int __init APIC_init_uniprocessor(void)
 		setup_IO_APIC();
 	else {
 		nr_ioapics = 0;
-		localise_nmi_watchdog();
 	}
-#else
-	localise_nmi_watchdog();
 #endif
 
 	x86_init.timers.setup_percpu_clockev();
-#ifdef CONFIG_X86_64
-	check_nmi_watchdog();
-#endif
-
 	return 0;
 }
 
arch/x86/kernel/apic/hw_nmi.c +0 -10
index b68b174..3e25afe 100644
@@ -94,14 +94,4 @@ early_initcall(register_trigger_all_cpu_backtrace);
 #endif
 
 /* STUB calls to mimic old nmi_watchdog behaviour */
-#if defined(CONFIG_X86_LOCAL_APIC)
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-#endif
-atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
 int unknown_nmi_panic;
-void cpu_nmi_set_wd_enabled(void) { return; }
-void stop_apic_nmi_watchdog(void *unused) { return; }
-void setup_apic_nmi_watchdog(void *unused) { return; }
-int __init check_nmi_watchdog(void) { return 0; }
arch/x86/kernel/apic/io_apic.c +0 -46

82 lines not on this page · raw message

arch/x86/kernel/cpu/perf_event.c +0 -9
index ed63101..1f129a1 100644
@@ -330,9 +330,6 @@ static bool reserve_pmc_hardware(void)
 {
 	int i;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		disable_lapic_nmi_watchdog();
-
 	for (i = 0; i < x86_pmu.num_counters; i++) {
 		if (!reserve_perfctr_nmi(x86_pmu.perfctr + i))
 			goto perfctr_fail;
@@ -355,9 +352,6 @@ perfctr_fail:
 	for (i--; i >= 0; i--)
 		release_perfctr_nmi(x86_pmu.perfctr + i);
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
-
 	return false;
 }
 
@@ -369,9 +363,6 @@ static void release_pmc_hardware(void)
 		release_perfctr_nmi(x86_pmu.perfctr + i);
 		release_evntsel_nmi(x86_pmu.eventsel + i);
 	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
 }
 
 #else
arch/x86/kernel/cpu/perfctr-watchdog.c +0 -642

657 lines not on this page · raw message

arch/x86/kernel/smpboot.c +0 -11
index 083e99d..f0a0624 100644
@@ -316,12 +316,6 @@ notrace static void __cpuinit start_secondary(void *unused)
 	 */
 	check_tsc_sync_target();
 
-	if (nmi_watchdog == NMI_IO_APIC) {
-		legacy_pic->mask(0);
-		enable_NMI_through_LVT0();
-		legacy_pic->unmask(0);
-	}
-
 	/* This must be done before setting cpu_online_mask */
 	set_cpu_sibling_map(raw_smp_processor_id());
 	wmb();
@@ -1061,8 +1055,6 @@ static int __init smp_sanity_check(unsigned max_cpus)
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		smpboot_clear_io_apic();
 
-		localise_nmi_watchdog();
-
 		connect_bsp_APIC();
 		setup_local_APIC();
 		end_local_APIC_setup();
@@ -1196,7 +1188,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_X86_IO_APIC
 	setup_ioapic_dest();
 #endif
-	check_nmi_watchdog();
 	mtrr_aps_init();
 }
 
@@ -1341,8 +1332,6 @@ int native_cpu_disable(void)
 	if (cpu == 0)
 		return -EBUSY;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
 	clear_local_APIC();
 
 	cpu_disable_common();
arch/x86/kernel/time.c +0 -18
index fb5cc5e1..25a28a2 100644
@@ -22,10 +22,6 @@
 #include <asm/hpet.h>
 #include <asm/time.h>
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-int timer_ack;
-#endif
-
 #ifdef CONFIG_X86_64
 volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
 #endif
@@ -63,20 +59,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	/* Keep nmi watchdog up to date */
 	inc_irq_stat(irq0_irqs);
 
-	/* Optimized out for !IO_APIC and x86_64 */
-	if (timer_ack) {
-		/*
-		 * Subtle, when I/O APICs are used we have to ack timer IRQ
-		 * manually to deassert NMI lines for the watchdog if run
-		 * on an 82489DX-based system.
-		 */
-		raw_spin_lock(&i8259A_lock);
-		outb(0x0c, PIC_MASTER_OCW3);
-		/* Ack the IRQ; AEOI will end it automatically. */
-		inb(PIC_MASTER_POLL);
-		raw_spin_unlock(&i8259A_lock);
-	}
-
 	global_clock_event->event_handler(global_clock_event);
 
 	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
arch/x86/kernel/traps.c +0 -2
index db30d9c..f02c179 100644
@@ -437,14 +437,12 @@ do_nmi(struct pt_regs *regs, long error_code)
 
 void stop_nmi(void)
 {
-	acpi_nmi_disable();
 	ignore_nmis++;
 }
 
 void restart_nmi(void)
 {
 	ignore_nmis--;
-	acpi_nmi_enable();
 }
 
 /* May run on IST stack. */
arch/x86/oprofile/nmi_timer_int.c +0 -3
index e3ecb71..0636dd9 100644
@@ -58,9 +58,6 @@ static void timer_stop(void)
 
 int __init op_nmi_timer_init(struct oprofile_operations *ops)
 {
-	if ((nmi_watchdog != NMI_IO_APIC) || (atomic_read(&nmi_active) <= 0))
-		return -ENODEV;
-
 	ops->start = timer_start;
 	ops->stop = timer_stop;
 	ops->cpu_type = "timer";
drivers/acpi/acpica/nsinit.c +0 -2
index 660a272..0cac7ec 100644
@@ -577,9 +577,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle,
 	 * as possible (without an NMI being received in the middle of
 	 * this) - so disable NMIs and initialize the device:
 	 */
-	acpi_nmi_disable();
 	status = acpi_ns_evaluate(info);
-	acpi_nmi_enable();
 
 	if (ACPI_SUCCESS(status)) {
 		walk_info->num_INI++;
drivers/watchdog/hpwdt.c +1 -6
index 3d77116..c19f4a2 100644
@@ -649,12 +649,7 @@ static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
 	 * If nmi_watchdog is turned off then we can turn on
 	 * our nmi decoding capability.
 	 */
-	if (!nmi_watchdog_active())
-		hpwdt_nmi_decoding = 1;
-	else
-		dev_warn(&dev->dev, "NMI decoding is disabled. To enable this "
-			"functionality you must reboot with nmi_watchdog=0 "
-			"and load the hpwdt driver with priority=1.\n");
+	hpwdt_nmi_decoding = 1;
 }
 #else
 static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
include/linux/nmi.h +0 -2
index 0cb3e5c..1c451e6 100644
@@ -25,8 +25,6 @@ static inline void touch_nmi_watchdog(void)
 #else
 extern void touch_nmi_watchdog(void);
 #endif
-static inline void acpi_nmi_disable(void) { }
-static inline void acpi_nmi_enable(void) { }
 
 /*
  * Create trigger_all_cpu_backtrace() out of the arch-provided
Signature · 1 line
1.7.2.3
#8 lore raw

[tip:perf/core] x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdog

Commit-ID:  072b198a4ad48bd722ec6d203d65422a4698eae7
Gitweb:     http://git.kernel.org/tip/072b198a4ad48bd722ec6d203d65422a4698eae7
Author:     Don Zickus <[email protected]>
AuthorDate: Fri, 12 Nov 2010 11:22:24 -0500
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 18 Nov 2010 09:08:23 +0100

x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdog

Now that the bulk of the old nmi_watchdog is gone, remove all the stub variables and hooks associated with it.

This touches lots of files mainly because of how the io_apic nmi_watchdog was implemented. Now that the io_apic nmi_watchdog is forever gone, remove all its fingers.

Most of this code was not being exercised by virtue of nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to risky here.

LKML-Reference: <[email protected]>

---
 arch/x86/include/asm/nmi.h             |   47 ---
 arch/x86/include/asm/smpboot_hooks.h   |    1 -
 arch/x86/include/asm/timer.h           |    6 -
 arch/x86/kernel/apic/apic.c            |   15 +-
 arch/x86/kernel/apic/hw_nmi.c          |   10 -
 arch/x86/kernel/apic/io_apic.c         |   46 ---
 arch/x86/kernel/cpu/perf_event.c       |    9 -
 arch/x86/kernel/cpu/perfctr-watchdog.c |  642 --------------------------------
 arch/x86/kernel/smpboot.c              |   11 -
 arch/x86/kernel/time.c                 |   18 -
 arch/x86/kernel/traps.c                |    2 -
 arch/x86/oprofile/nmi_timer_int.c      |    3 -
 drivers/acpi/acpica/nsinit.c           |    2 -
 drivers/watchdog/hpwdt.c               |    7 +-
 include/linux/nmi.h                    |    2 -
 15 files changed, 2 insertions(+), 819 deletions(-)
arch/x86/include/asm/nmi.h +0 -47
index 33292ec..3545838 100644
@@ -7,35 +7,13 @@
 
 #ifdef ARCH_HAS_NMI_WATCHDOG
 
-/**
- * do_nmi_callback
- *
- * Check to see if a callback exists and execute it.  Return 1
- * if the handler exists and was handled successfully.
- */
-int do_nmi_callback(struct pt_regs *regs, int cpu);
-
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-extern int check_nmi_watchdog(void);
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
 extern int reserve_evntsel_nmi(unsigned int);
 extern void release_evntsel_nmi(unsigned int);
 
-extern void setup_apic_nmi_watchdog(void *);
-extern void stop_apic_nmi_watchdog(void *);
-extern void disable_timer_nmi_watchdog(void);
-extern void enable_timer_nmi_watchdog(void);
-extern void cpu_nmi_set_wd_enabled(void);
-
-extern atomic_t nmi_active;
-extern unsigned int nmi_watchdog;
-#define NMI_NONE	0
-#define NMI_IO_APIC	1
-#define NMI_LOCAL_APIC	2
-#define NMI_INVALID	3
-
 struct ctl_table;
 extern int proc_nmi_enabled(struct ctl_table *, int ,
 			void __user *, size_t *, loff_t *);
@@ -43,33 +21,8 @@ extern int unknown_nmi_panic;
 
 void arch_trigger_all_cpu_backtrace(void);
 #define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
-
-static inline void localise_nmi_watchdog(void)
-{
-	if (nmi_watchdog == NMI_IO_APIC)
-		nmi_watchdog = NMI_LOCAL_APIC;
-}
-
-/* check if nmi_watchdog is active (ie was specified at boot) */
-static inline int nmi_watchdog_active(void)
-{
-	/*
-	 * actually it should be:
-	 * 	return (nmi_watchdog == NMI_LOCAL_APIC ||
-	 * 		nmi_watchdog == NMI_IO_APIC)
-	 * but since they are power of two we could use a
-	 * cheaper way --cvg
-	 */
-	return nmi_watchdog & (NMI_LOCAL_APIC | NMI_IO_APIC);
-}
 #endif
 
-void lapic_watchdog_stop(void);
-int lapic_watchdog_init(unsigned nmi_hz);
-int lapic_wd_event(unsigned nmi_hz);
-unsigned lapic_adjust_nmi_hz(unsigned hz);
-void disable_lapic_nmi_watchdog(void);
-void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
 void restart_nmi(void);
 
arch/x86/include/asm/smpboot_hooks.h +0 -1
index 1def601..6c22bf3 100644
@@ -48,7 +48,6 @@ static inline void __init smpboot_setup_io_apic(void)
 		setup_IO_APIC();
 	else {
 		nr_ioapics = 0;
-		localise_nmi_watchdog();
 	}
 #endif
 }
arch/x86/include/asm/timer.h +0 -6
index 5469630..fa7b917 100644
@@ -10,12 +10,6 @@
 unsigned long long native_sched_clock(void);
 extern int recalibrate_cpu_khz(void);
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-extern int timer_ack;
-#else
-# define timer_ack (0)
-#endif
-
 extern int no_timer_check;
 
 /* Accelerators for sched_clock()
arch/x86/kernel/apic/apic.c +1 -14
index 3f838d5..e9e2a93 100644
@@ -31,7 +31,6 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/dmi.h>
-#include <linux/nmi.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
 
@@ -799,11 +798,7 @@ void __init setup_boot_APIC_clock(void)
 	 * PIT/HPET going.  Otherwise register lapic as a dummy
 	 * device.
 	 */
-	if (nmi_watchdog != NMI_IO_APIC)
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-	else
-		pr_warning("APIC timer registered as dummy,"
-			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+	lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
 
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
@@ -1387,7 +1382,6 @@ void __cpuinit end_local_APIC_setup(void)
 	}
 #endif
 
-	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
 }
 
@@ -1750,17 +1744,10 @@ int __init APIC_init_uniprocessor(void)
 		setup_IO_APIC();
 	else {
 		nr_ioapics = 0;
-		localise_nmi_watchdog();
 	}
-#else
-	localise_nmi_watchdog();
 #endif
 
 	x86_init.timers.setup_percpu_clockev();
-#ifdef CONFIG_X86_64
-	check_nmi_watchdog();
-#endif
-
 	return 0;
 }
 
arch/x86/kernel/apic/hw_nmi.c +0 -10
index b68b174..3e25afe 100644
@@ -94,14 +94,4 @@ early_initcall(register_trigger_all_cpu_backtrace);
 #endif
 
 /* STUB calls to mimic old nmi_watchdog behaviour */
-#if defined(CONFIG_X86_LOCAL_APIC)
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-#endif
-atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
 int unknown_nmi_panic;
-void cpu_nmi_set_wd_enabled(void) { return; }
-void stop_apic_nmi_watchdog(void *unused) { return; }
-void setup_apic_nmi_watchdog(void *unused) { return; }
-int __init check_nmi_watchdog(void) { return 0; }
arch/x86/kernel/apic/io_apic.c +0 -46

82 lines not on this page · raw message

arch/x86/kernel/cpu/perf_event.c +0 -9
index ed63101..1f129a1 100644
@@ -330,9 +330,6 @@ static bool reserve_pmc_hardware(void)
 {
 	int i;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		disable_lapic_nmi_watchdog();
-
 	for (i = 0; i < x86_pmu.num_counters; i++) {
 		if (!reserve_perfctr_nmi(x86_pmu.perfctr + i))
 			goto perfctr_fail;
@@ -355,9 +352,6 @@ perfctr_fail:
 	for (i--; i >= 0; i--)
 		release_perfctr_nmi(x86_pmu.perfctr + i);
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
-
 	return false;
 }
 
@@ -369,9 +363,6 @@ static void release_pmc_hardware(void)
 		release_perfctr_nmi(x86_pmu.perfctr + i);
 		release_evntsel_nmi(x86_pmu.eventsel + i);
 	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
 }
 
 #else
arch/x86/kernel/cpu/perfctr-watchdog.c +0 -642

657 lines not on this page · raw message

arch/x86/kernel/smpboot.c +0 -11
index 083e99d..f0a0624 100644
@@ -316,12 +316,6 @@ notrace static void __cpuinit start_secondary(void *unused)
 	 */
 	check_tsc_sync_target();
 
-	if (nmi_watchdog == NMI_IO_APIC) {
-		legacy_pic->mask(0);
-		enable_NMI_through_LVT0();
-		legacy_pic->unmask(0);
-	}
-
 	/* This must be done before setting cpu_online_mask */
 	set_cpu_sibling_map(raw_smp_processor_id());
 	wmb();
@@ -1061,8 +1055,6 @@ static int __init smp_sanity_check(unsigned max_cpus)
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		smpboot_clear_io_apic();
 
-		localise_nmi_watchdog();
-
 		connect_bsp_APIC();
 		setup_local_APIC();
 		end_local_APIC_setup();
@@ -1196,7 +1188,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_X86_IO_APIC
 	setup_ioapic_dest();
 #endif
-	check_nmi_watchdog();
 	mtrr_aps_init();
 }
 
@@ -1341,8 +1332,6 @@ int native_cpu_disable(void)
 	if (cpu == 0)
 		return -EBUSY;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
 	clear_local_APIC();
 
 	cpu_disable_common();
arch/x86/kernel/time.c +0 -18
index fb5cc5e1..25a28a2 100644
@@ -22,10 +22,6 @@
 #include <asm/hpet.h>
 #include <asm/time.h>
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-int timer_ack;
-#endif
-
 #ifdef CONFIG_X86_64
 volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
 #endif
@@ -63,20 +59,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	/* Keep nmi watchdog up to date */
 	inc_irq_stat(irq0_irqs);
 
-	/* Optimized out for !IO_APIC and x86_64 */
-	if (timer_ack) {
-		/*
-		 * Subtle, when I/O APICs are used we have to ack timer IRQ
-		 * manually to deassert NMI lines for the watchdog if run
-		 * on an 82489DX-based system.
-		 */
-		raw_spin_lock(&i8259A_lock);
-		outb(0x0c, PIC_MASTER_OCW3);
-		/* Ack the IRQ; AEOI will end it automatically. */
-		inb(PIC_MASTER_POLL);
-		raw_spin_unlock(&i8259A_lock);
-	}
-
 	global_clock_event->event_handler(global_clock_event);
 
 	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
arch/x86/kernel/traps.c +0 -2
index db30d9c..f02c179 100644
@@ -437,14 +437,12 @@ do_nmi(struct pt_regs *regs, long error_code)
 
 void stop_nmi(void)
 {
-	acpi_nmi_disable();
 	ignore_nmis++;
 }
 
 void restart_nmi(void)
 {
 	ignore_nmis--;
-	acpi_nmi_enable();
 }
 
 /* May run on IST stack. */
arch/x86/oprofile/nmi_timer_int.c +0 -3
index e3ecb71..0636dd9 100644
@@ -58,9 +58,6 @@ static void timer_stop(void)
 
 int __init op_nmi_timer_init(struct oprofile_operations *ops)
 {
-	if ((nmi_watchdog != NMI_IO_APIC) || (atomic_read(&nmi_active) <= 0))
-		return -ENODEV;
-
 	ops->start = timer_start;
 	ops->stop = timer_stop;
 	ops->cpu_type = "timer";
drivers/acpi/acpica/nsinit.c +0 -2
index 660a272..0cac7ec 100644
@@ -577,9 +577,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle,
 	 * as possible (without an NMI being received in the middle of
 	 * this) - so disable NMIs and initialize the device:
 	 */
-	acpi_nmi_disable();
 	status = acpi_ns_evaluate(info);
-	acpi_nmi_enable();
 
 	if (ACPI_SUCCESS(status)) {
 		walk_info->num_INI++;
drivers/watchdog/hpwdt.c +1 -6
index 3d77116..c19f4a2 100644
@@ -649,12 +649,7 @@ static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
 	 * If nmi_watchdog is turned off then we can turn on
 	 * our nmi decoding capability.
 	 */
-	if (!nmi_watchdog_active())
-		hpwdt_nmi_decoding = 1;
-	else
-		dev_warn(&dev->dev, "NMI decoding is disabled. To enable this "
-			"functionality you must reboot with nmi_watchdog=0 "
-			"and load the hpwdt driver with priority=1.\n");
+	hpwdt_nmi_decoding = 1;
 }
 #else
 static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
include/linux/nmi.h +0 -2
index 0cb3e5c..1c451e6 100644
@@ -25,8 +25,6 @@ static inline void touch_nmi_watchdog(void)
 #else
 extern void touch_nmi_watchdog(void);
 #endif
-static inline void acpi_nmi_disable(void) { }
-static inline void acpi_nmi_enable(void) { }
 
 /*
  * Create trigger_all_cpu_backtrace() out of the arch-provided
#9 lore raw
In reply to Don Zickus
Quoted 5 lines · Don Zickus

Ingo asked me to remove the old nmi_watchdog to minimize the amount of code duplication we have to do for recent fixes. All the functionality needed by the old nmi watchdog should be available in perf now.

Hi Don, moving out old nmi-watchdog in a sake of new perf based one is
definitely a win I believe. And I didn't find anything suspicious in patch series as well.

Though it's a bit pity that we eventually drop old io-apic based watchdog ;) I never used it personally since apic on mine cpu works well enough but still I think the io-apic watchdog code was pretty interesting to read and I believe it worked well with old pit timer.

Quoted 2 lines

Compile tested for 32/64 bit with the lockup detector turned on and off. Tested on 32/64 bit machines to make sure they still boot properly.

ok, great done!

Cyrill