HID: roccat: using new sysfs_create_bin_group() in kone driver
Subsystems (2)
PATCH 2/2 HID: roccat: using new sysfs_create_bin_group() in kone driver
hid-roccat-kone now uses new group functions for creating binary sysfs attributes.
--- drivers/hid/hid-roccat-kone.c | 53 ++++++++++++---------------------------- 1 files changed, 16 insertions(+), 37 deletions(-)
drivers/hid/hid-roccat-kone.c +16 -37
@@ -710,6 +710,20 @@ static struct bin_attribute kone_profile5_attr = { .write = kone_sysfs_write_profile5 }; +static struct attribute *kone_bin_attributes[] = { + &kone_settings_attr.attr, + &kone_profile1_attr.attr, + &kone_profile2_attr.attr, + &kone_profile3_attr.attr, + &kone_profile4_attr.attr, + &kone_profile5_attr.attr, +NULL +}; + +static struct attribute_group kone_bin_attribute_group = { + .attrs = kone_bin_attributes +}; +static int kone_create_sysfs_attributes (struct usb_interface *intf) {int retval;
@@ -718,42 +732,12 @@ static int kone_create_sysfs_attributes(struct usb_interface *intf)if (retval) goto exit_1; - retval =sysfs_create_bin_file (&intf->dev.kobj, &kone_settings_attr); + retval =sysfs_create_bin_group (&intf->dev.kobj, &kone_bin_attribute_group);if (retval) goto exit_2; - retval =sysfs_create_bin_file (&intf->dev.kobj, &kone_profile1_attr); -if (retval) - goto exit_3; - - retval =sysfs_create_bin_file (&intf->dev.kobj, &kone_profile2_attr); -if (retval) - goto exit_4; - - retval =sysfs_create_bin_file (&intf->dev.kobj, &kone_profile3_attr); -if (retval) - goto exit_5; - - retval =sysfs_create_bin_file (&intf->dev.kobj, &kone_profile4_attr); -if (retval) - goto exit_6; - - retval =sysfs_create_bin_file (&intf->dev.kobj, &kone_profile5_attr); -if (retval) - goto exit_7; -return 0 ; -exit_7: -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile4_attr); -exit_6: -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile3_attr); -exit_5: -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile2_attr); -exit_4: -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile1_attr); -exit_3: -sysfs_remove_bin_file (&intf->dev.kobj, &kone_settings_attr); exit_2:sysfs_remove_group (&intf->dev.kobj, &kone_attribute_group); exit_1:
@@ -762,12 +746,7 @@ exit_1:static void kone_remove_sysfs_attributes (struct usb_interface *intf) { -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile5_attr); -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile4_attr); -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile3_attr); -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile2_attr); -sysfs_remove_bin_file (&intf->dev.kobj, &kone_profile1_attr); -sysfs_remove_bin_file (&intf->dev.kobj, &kone_settings_attr); +sysfs_remove_group (&intf->dev.kobj, &kone_bin_attribute_group);sysfs_remove_group (&intf->dev.kobj, &kone_attribute_group); }
Signature · 1 line
1.7.2.3
Quoted 2 lines · Stefan Achatz
hid-roccat-kone now uses new group functions for creating binary sysfs attributes.
Looking at this, I have a problem with the way this works. You are still doing this the hard and racy way.
sysfs attributes that are only added when we initialize the hardware and are only removed when we remove the driver should use the device layer functions to create their attributes.
This achieves two things. The code is easier to write because there is less of it.
The notification to user space happens after the attributes appear so that you don't
have strange hotplug races.
If there a chance you can look at implementing this in the simpler race free way?
Eric
Quoted 95 lines
Signed-off-by Stefan Achatz <[email protected]>---
drivers/hid/hid-roccat-kone.c | 53 ++++++++++++----------------------------1 files changed, 16 insertions(+), 37 deletions(-)drivers/hid/hid-roccat-kone.c +0
-0@@ -710,6 +710,20 @@ static struct bin_attribute kone_profile5_attr = {.write =
kone_sysfs_write_profile5
};drivers/hid/hid-roccat-kone.c +14
-0+static struct attribute *kone_bin_attributes[] = { + &kone_settings_attr.attr, + &kone_profile1_attr.attr, + &kone_profile2_attr.attr, + &kone_profile3_attr.attr, + &kone_profile4_attr.attr, + &kone_profile5_attr.attr, + NULL +}; + +static struct attribute_group kone_bin_attribute_group = { + .attrs = kone_bin_attributes +}; +static int
kone_create_sysfs_attributes(struct usb_interface *intf){
int retval;drivers/hid/hid-roccat-kone.c +1
-31@@ -718,42 +732,12 @@ static int kone_create_sysfs_attributes(struct usb_interface *intf) if (retval) goto exit_1; - retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_settings_attr); + retval = sysfs_create_bin_group(&intf->dev.kobj, &kone_bin_attribute_group); if (retval) goto exit_2; - retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile1_attr); - if (retval) - goto exit_3; - - retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile2_attr); - if (retval) - goto exit_4; - - retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile3_attr); - if (retval) - goto exit_5; - - retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile4_attr); - if (retval) - goto exit_6; - - retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile5_attr); - if (retval) - goto exit_7; - return 0; -exit_7: - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr); -exit_6: - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr); -exit_5: - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr); -exit_4: - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr); -exit_3: - sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr);exit_2:
sysfs_remove_group(&intf->dev.kobj,&kone_attribute_group);exit_1:drivers/hid/hid-roccat-kone.c +1
-7@@ -762,12 +746,7 @@ exit_1: static void kone_remove_sysfs_attributes(struct usb_interface *intf) { - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile5_attr); - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr); - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr); - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr); - sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr); - sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr); + sysfs_remove_group(&intf->dev.kobj, &kone_bin_attribute_group); sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group); } --1.7.2.3
Quoted 11 lines · Eric Biederman
Quoted 2 lines · Stefan Achatz
hid-roccat-kone now uses new group functions for creating binary sysfs attributes.
Looking at this, I have a problem with the way this works. You are still doing this the hard and racy way.
sysfs attributes that are only added when we initialize the hardware and are only removed when we remove the driver should use the device layer functions to create their attributes.
Quoted 8 lines
This achieves two things. The code is easier to write because there is less of it.
The notification to user space happens after the attributes appear so that you don't
have strange hotplug races.If there a chance you can look at implementing this in the simpler race free way?
Good point, just attach this attribute group to the device and the driver core will automatically create the files for you.
thanks,
greg k-h
Quoted 18 lines · Greg KH
Quoted 17 lines · Eric Biederman
Quoted 2 lines · Stefan Achatz
hid-roccat-kone now uses new group functions for creating binary sysfs attributes.
Looking at this, I have a problem with the way this works. You are still doing this the hard and racy way.
sysfs attributes that are only added when we initialize the hardware and are only removed when we remove the driver should use the device layer functions to create their attributes.
This achieves two things. The code is easier to write because there is less of it.
The notification to user space happens after the attributes appear so that you don't
have strange hotplug races.
Quoted 6 lines
Quoted 2 lines
If there a chance you can look at implementing this in the simpler race free way?
Good point, just attach this attribute group to the device and the driver core will automatically create the files for you.
Attribute group in device structure is normally owned and managed by subsystem core; without additional plumbing drivers should not be touching it, at least not normally.
Plus we do not have binary attribute group in device structure [yet].
Signature · 1 line
Dmitry
Quoted 26 lines · Dmitry Torokhov
Quoted 18 lines · Greg KH
Quoted 17 lines · Eric Biederman
Quoted 2 lines · Stefan Achatz
hid-roccat-kone now uses new group functions for creating binary sysfs attributes.
Looking at this, I have a problem with the way this works. You are still doing this the hard and racy way.
sysfs attributes that are only added when we initialize the hardware and are only removed when we remove the driver should use the device layer functions to create their attributes.
This achieves two things. The code is easier to write because there is less of it.
The notification to user space happens after the attributes appear so that you don't
have strange hotplug races.Quoted 6 lines
Quoted 2 lines
If there a chance you can look at implementing this in the simpler race free way?
Good point, just attach this attribute group to the device and the driver core will automatically create the files for you.
Quoted 5 lines
Attribute group in device structure is normally owned and managed by subsystem core; without additional plumbing drivers should not be touching it, at least not normally.
Plus we do not have binary attribute group in device structure [yet].
In thinking about it a bit more, why do you have so many binary attributes for this driver? binary sysfs files are rare, so adding a binary attribute group pointer to the device or driver would just waste a lot of space that no one else uses.
What are these binary files for? Who uses them? I don't seem to be able to find them in the Documentation/ABI directory, or am I missing something here?
thanks,
greg k-h
Am Samstag, den 13.11.2010, 06:39 -0800 schrieb Greg KH:
Quoted 33 lines · Dmitry Torokhov
Quoted 26 lines · Greg KH
Quoted 18 lines · Eric Biederman
Quoted 17 lines · Stefan Achatz
Quoted 2 lines
hid-roccat-kone now uses new group functions for creating binary sysfs attributes.
Looking at this, I have a problem with the way this works. You are still doing this the hard and racy way.
sysfs attributes that are only added when we initialize the hardware and are only removed when we remove the driver should use the device layer functions to create their attributes.
This achieves two things. The code is easier to write because there is less of it.
The notification to user space happens after the attributes appear so that you don't
have strange hotplug races.Quoted 6 lines
Quoted 2 lines
If there a chance you can look at implementing this in the simpler race free way?
Good point, just attach this attribute group to the device and the driver core will automatically create the files for you.
Quoted 5 lines
Attribute group in device structure is normally owned and managed by subsystem core; without additional plumbing drivers should not be touching it, at least not normally.
Plus we do not have binary attribute group in device structure [yet].
Quoted 8 lines
In thinking about it a bit more, why do you have so many binary attributes for this driver? binary sysfs files are rare, so adding a binary attribute group pointer to the device or driver would just waste a lot of space that no one else uses.
What are these binary files for? Who uses them? I don't seem to be able to find them in the
Documentation/ABIdirectory, or am I missing something here?
Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
Stefan
Quoted 39 lines · Stefan Achatz
Am Samstag, den 13.11.2010, 06:39 -0800 schrieb Greg KH:
Quoted 38 lines · Dmitry Torokhov
Quoted 26 lines · Greg KH
Quoted 18 lines · Eric Biederman
Quoted 17 lines · Stefan Achatz
Quoted 2 lines
hid-roccat-kone now uses new group functions for creating binary sysfs attributes.
Looking at this, I have a problem with the way this works. You are still doing this the hard and racy way.
sysfs attributes that are only added when we initialize the hardware and are only removed when we remove the driver should use the device layer functions to create their attributes.
This achieves two things. The code is easier to write because there is less of it.
The notification to user space happens after the attributes appear so that you don't
have strange hotplug races.Quoted 6 lines
Quoted 2 lines
If there a chance you can look at implementing this in the simpler race free way?
Good point, just attach this attribute group to the device and the driver core will automatically create the files for you.
Quoted 5 lines
Attribute group in device structure is normally owned and managed by subsystem core; without additional plumbing drivers should not be touching it, at least not normally.
Plus we do not have binary attribute group in device structure [yet].
In thinking about it a bit more, why do you have so many binary attributes for this driver? binary sysfs files are rare, so adding a binary attribute group pointer to the device or driver would just waste a lot of space that no one else uses.
Quoted 5 lines
Quoted 3 lines
What are these binary files for? Who uses them? I don't seem to be able to find them in the
Documentation/ABIdirectory, or am I missing something here?
Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
My apologies, that does look correct, thanks for doing it.
Yeah, odds are udev wants to see these files when the device shows up so we need a way to get them created before the device event is sent out to userspace. So we need to get them assigned to the device or driver somehow like the default attribute groups we have today. Any ideas are appreciated.
thanks,
greg k-h