TTY/serial fixes for .37-rc1
Subsystems (2)
PATCH 1/1 TTY/serial fixes for .37-rc1
Here are a number of tty and serial fixes for your .37-rc1 tree.
Full details are below, but there's just a range of bug fixes all over the place, some of them having lived in the tree for quite some time, and it's nice to get them finally resolved.
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/tty-2.6.git/ tty-linus
Patches will be sent to the linux-kernel mailing list, if anyone wants to see them.
thanks,
greg k-h
------------
MAINTAINERS | 4 +- drivers/char/amiserial.c | 1 - drivers/char/nozomi.c | 1 - drivers/char/pcmcia/synclink_cs.c | 1 + drivers/serial/8250.c | 5 +++- drivers/serial/8250_pci.c | 5 ++++ drivers/serial/bfin_5xx.c | 31 ++++++++++++++++------- drivers/tty/n_gsm.c | 5 ++- drivers/tty/tty_buffer.c | 14 +++++++++- drivers/tty/tty_ldisc.c | 49 +++++++++++++++++++++++++++++++----- drivers/tty/vt/vc_screen.c | 6 ++-- include/linux/tty.h | 2 +- 12 files changed, 94 insertions(+), 30 deletions(-)
---------------
Alan Cox (2):
tty: Fix formatting in tty.h
nozomi: Fix warning from the previous TIOCGCOUNT changes
Andres Salomon (1):
tty: fix warning in synclink driver
Geert Uytterhoeven (1):
amiserial: Remove unused variable icount
Greg Kroah-Hartman (1):
tty: the development tree is now done in git
Jiri Olsa (1):
tty: prevent DOS in the flush_to_ldisc
Jiri Slaby (1):
TTY: restore tty_ldisc_wait_idle
Joe Perches (1):
drivers/serial/bfin_5xx.c: Fix line continuation defects
Ken Mills (2):
n_gsm: Copy n2 over when configuring via ioctl interface
n_gsm: Fix length handling
Lawrence Rust (1):
8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
Maciej Szmigiero (1):
SERIAL: blacklist si3052 chip
Mikulas Patocka (1):
8250: add support for Kouwell KW-L221N-2
Nicolas Pitre (1):
vcs: make proper usage of the poll flags
Philippe Rétornaz (1):
tty_ldisc: Fix BUG() on hangup
Sonic Zhang (4):
serial: bfin_5xx: always include DMA headers
serial: bfin_5xx: remove redundant SSYNC to improve TX speed
serial: bfin_5xx: disable CON_PRINTBUFFER for consoles
serial: bfin_5xx: grab port lock before making port termios changes
PATCH 1/19 tty: the development tree is now done in git
So properly mark it as such in the MAINTAINERS file.
--- MAINTAINERS | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
MAINTAINERS +2 -2
@@ -161,7 +161,7 @@ M: Greg Kroah-Hartman <[email protected]> L: [email protected] W: http://serial.sourceforge.net S: Maintained -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git F: drivers/serial/8250* F: include/linux/serial_8250.h
@@ -5910,7 +5910,7 @@ S: Maintained TTY LAYER M: Greg Kroah-Hartman <[email protected]> S: Maintained -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git F: drivers/char/tty_* F: drivers/serial/serial_core.c F: include/linux/serial_core.h
Signature · 1 line
1.7.1
PATCH 2/19 tty: Fix formatting in tty.h
In reply to Greg KHFrom: Alan Cox <[email protected]>
Someone added a new ldisc number and messed up the tabbing. Fix it before anyone else copies it.
--- include/linux/tty.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/linux/tty.h +1 -1
@@ -50,7 +50,7 @@#define N_V253 19/* Codec control over voice modem */ #define N_CAIF 20/* CAIF protocol for talking to modems */ #define N_GSM0710 21/* GSM 0710 Mux */ -#define N_TI_WL 22/* for TI's WL BT, FM, GPS combo chips */ +#define N_TI_WL 22/* for TI's WL BT, FM, GPS combo chips */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as
Signature · 1 line
1.7.1
PATCH 3/19 tty: fix warning in synclink driver
In reply to Greg KHFrom: Andres Salomon <[email protected]>
During builds I see the following warning -
CC [M] drivers/char/pcmcia/synclink_cs.odrivers/char/pcmcia/synclink_cs.c:2194: warning: ‘mgslpc_get_icount’ defined but not used
The function is a callback meant to be assigned to get_icount (added during 0587102cf). Fix accordingly.
--- drivers/char/pcmcia/synclink_cs.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/char/pcmcia/synclink_cs.c +1 -0
@@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = { .hangup = mgslpc_hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .get_icount = mgslpc_get_icount, .proc_fops = &mgslpc_proc_fops, };
Signature · 1 line
1.7.1
PATCH 4/19 nozomi: Fix warning from the previous TIOCGCOUNT changes
In reply to Greg KHFrom: Alan Cox <[email protected]>
Just remove a now unused variable
--- drivers/char/nozomi.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
drivers/char/nozomi.c +0 -1
@@ -1828,7 +1828,6 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) {struct port *port = tty->driver_data; -void __user *argp = (void __user *)arg;int rval = -ENOIOCTLCMD ;DBG1 ("******** IOCTL, cmd: %d" , cmd);
Signature · 1 line
1.7.1
PATCH 5/19 8250: add support for Kouwell KW-L221N-2
In reply to Greg KHFrom: Mikulas Patocka <[email protected]>
Add support for Kouwell KW-L221N-2 card.
--- drivers/serial/8250_pci.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/serial/8250_pci.c +3 -0
@@ -2863,6 +2863,9 @@ static struct pci_device_id serial_pci_tbl[] = {PCI_SUBVENDOR_ID_SIIG ,PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL ,0 ,0 , pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, 0x9505, +PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , + pbn_b0_bt_2_921600 },/* * The below card is a little controversial since it is the
Signature · 1 line
1.7.1
PATCH 6/19 tty: prevent DOS in the flush_to_ldisc
In reply to Greg KHFrom: Jiri Olsa <[email protected]>
There's a small window inside the flush_to_ldisc function, where the tty is unlocked and calling ldisc's receive_buf function. If in this window new buffer is added to the tty, the processing might never leave the flush_to_ldisc function.
This scenario will hog the cpu, causing other tty processing starving, and making it impossible to interface the computer via tty.
I was able to exploit this via pty interface by sending only control characters to the master input, causing the flush_to_ldisc to be scheduled, but never actually generate any output.
To reproduce, please run multiple instances of following code.
- SNIP
#define _XOPEN_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
int main(int argc, char **argv)
{
int i, slave, master = getpt();
char buf[8192];
sprintf(buf, "%s", ptsname(master));
grantpt(master);
unlockpt(master);
slave = open(buf, O_RDWR);
if (slave < 0) {
perror("open slave failed");
return 1;
}
for(i = 0; i < sizeof(buf); i++)
buf[i] = rand() % 32;
while(1) {
write(master, buf, sizeof(buf));
}
return 0;
}- SNIP
The attached patch (based on -next tree) fixes this by checking on the tty buffer tail. Once it's reached, the current work is rescheduled and another could run.
--- drivers/tty/tty_buffer.c | 14 ++++++++++++-- 1 files changed, 12 insertions(+), 2 deletions(-)
drivers/tty/tty_buffer.c +12 -2
@@ -413,7 +413,8 @@ static void flush_to_ldisc(struct work_struct *work)spin_lock_irqsave (&tty->buf.lock, flags);if (!test_and_set_bit (TTY_FLUSHING , &tty->flags)) { -struct tty_buffer *head; +struct tty_buffer *head, *tail = tty->buf.tail; +int seen_tail =0 ;while ((head = tty->buf.head) !=NULL ) {int count;char *char_buf;
@@ -423,6 +424,15 @@ static void flush_to_ldisc(struct work_struct *work)if (!count) {if (head->next ==NULL )break ; +/* +There's a possibility tty might get new buffer +added during the unlock window below. We could +end up spinning in here forever hogging the CPU +completely. To avoid this let's have a rest each +time we processed the tail buffer. +*/ +if (tail == head) + seen_tail =1 ; tty->buf.head = head->next;tty_buffer_free (tty, head);continue ;
@@ -432,7 +442,7 @@ static void flush_to_ldisc(struct work_struct *work)line discipline as we want to empty the queue */ if (test_bit (TTY_FLUSHPENDING , &tty->flags))break ; -if (!tty->receive_room) { +if (!tty->receive_room || seen_tail) {schedule_delayed_work (&tty->buf.work,1 );break ; }
Signature · 1 line
1.7.1
PATCH 7/19 drivers/serial/bfin_5xx.c: Fix line continuation defects
In reply to Greg KHFrom: Joe Perches <[email protected]>
--- drivers/serial/bfin_5xx.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-)
drivers/serial/bfin_5xx.c +2 -4
@@ -734,8 +734,7 @@ static int bfin_serial_startup(struct uart_port *port) IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_DISABLED, "BFIN_UART_CTS", uart)) { uart->cts_pin =-1 ; -pr_info ("Unable to attach BlackFin UART CTS interrupt.\ -So, disable it.\n" ); +pr_info ("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n" ); } }if (uart->rts_pin >=0 ) {
@@ -747,8 +746,7 @@ static int bfin_serial_startup(struct uart_port *port)if (request_irq (uart->status_irq, bfin_serial_mctrl_cts_int,IRQF_DISABLED ,"BFIN_UART_MODEM_STATUS" , uart)) { -pr_info ("Unable to attach BlackFin UART Modem \ -Status interrupt.\n" ); +pr_info ("Unable to attach BlackFin UART Modem Status interrupt.\n" ); }/* CTS RTS PINs are negative assertive. */
Signature · 1 line
1.7.1
PATCH 8/19 SERIAL: blacklist si3052 chip
In reply to Greg KHFrom: Maciej Szmigiero <[email protected]>
[SERIAL]blacklist si3052 chip
Si3052-based softmodems aren't serial ports so don't bind serial driver to them. Allows proper driver to bind to them.
--- drivers/serial/8250_pci.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/serial/8250_pci.c +2 -0
@@ -2285,6 +2285,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {static const struct pci_device_id softmodem_blacklist[] = { {PCI_VDEVICE (AL ,0x5457 ), },/* ALi Corporation M5457 AC'97 Modem */ + {PCI_VDEVICE (MOTOROLA ,0x3052 ), },/* Motorola Si3052-based modem */ + {PCI_DEVICE (0x1543 ,0x3052 ), },/* Si3052-based modem, default IDs */ };/*
Signature · 1 line
1.7.1
PATCH 10/19 tty_ldisc: Fix BUG() on hangup
In reply to Greg KHFrom: Philippe Rétornaz <[email protected]>
A kernel BUG when bluetooth rfcomm connection drop while the associated serial port is open is sometime triggered.
It seems that the line discipline can disappear between the tty_ldisc_put and tty_ldisc_get. This patch fall back to the N_TTY line discipline if the previous discipline is not available anymore.
--- drivers/tty/tty_ldisc.c | 20 +++++++++++++------- 1 files changed, 13 insertions(+), 7 deletions(-)
drivers/tty/tty_ldisc.c +13 -7
@@ -743,9 +743,12 @@ static void tty_reset_termios(struct tty_struct *tty)* state closed */ -static void tty_ldisc_reinit (struct tty_struct *tty,int ldisc) +static int tty_ldisc_reinit (struct tty_struct *tty,int ldisc) { -struct tty_ldisc *ld; +struct tty_ldisc *ld =tty_ldisc_get (ldisc); + +if (IS_ERR (ld)) +return -1 ;tty_ldisc_close (tty, tty->ldisc);tty_ldisc_put (tty->ldisc);
@@ -753,10 +756,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)/* * Switch the line discipline back */ - ld =tty_ldisc_get (ldisc); -BUG_ON (IS_ERR (ld));tty_ldisc_assign (tty, ld);tty_set_termios_ldisc (tty, ldisc); + +return 0 ; }/**
@@ -831,13 +834,16 @@ void tty_ldisc_hangup(struct tty_struct *tty)a FIXME */ if (tty->ldisc) {/* Not yet closed */ if (reset ==0 ) { -tty_ldisc_reinit (tty, tty->termios->c_line); - err =tty_ldisc_open (tty, tty->ldisc); + +if (!tty_ldisc_reinit (tty, tty->termios->c_line)) + err =tty_ldisc_open (tty, tty->ldisc); +else + err =1 ; }/* If the re-open fails or we reset then go to N_TTY. The N_TTY open cannot fail */ if (reset || err) { -tty_ldisc_reinit (tty,N_TTY ); +BUG_ON (tty_ldisc_reinit (tty,N_TTY ));WARN_ON (tty_ldisc_open (tty, tty->ldisc)); }tty_ldisc_enable (tty);
Signature · 1 line
1.7.1
Re: [PATCH 10/19] tty_ldisc: Fix BUG() on hangup
Quoted 6 lines · Greg Kroah-Hartman <gregkh <at> suse.de> writes:
From: Philippe Rétornaz <philippe.retornaz <at> epfl.ch>
A kernel BUG when bluetooth rfcomm connection drop while the associated serial port is open is sometime triggered.
Quoted 8 lines
It seems that the line discipline can disappear between the
tty_ldisc_putandtty_ldisc_get. This patch fall back to theN_TTYline discipline if the previous discipline is not available anymore.Signed-off-by Philippe Retornaz <philippe.retornaz <at> epfl.ch>Acked-by Alan Cox <alan <at> linux.intel.com>Cc stable <stable <at> kernel.org>Signed-off-by Greg Kroah-Hartman <gregkh <at> suse.de>
I think I've run into this issue with a pl2303 adapter on device removal with v2.6.32.15:
[ 134.572454] ------------[ cut here ]------------ [ 134.576038] kernel BUG at drivers/char/tty_ldisc.c:707! [ 134.576038] invalid opcode: 0000 [#1] SMP [ 134.576038] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host2/target2:0:0/ 2:0:0:0/block/sdb/ro [ 134.576038] Modules linked in: ----- [ 134.576038] [ 134.576038] Pid: 268, comm: khubd Not tainted (2.6.32.15-1 #1) Catalyst [ 134.576038] EIP: 0060:[<c122323e>] EFLAGS: 00010202 CPU: 0 [ 134.576038] EIP is at tty_ldisc_reinit+0x3e/0x50 [ 134.576038] EAX: ffffffea EBX: f660e000 ECX: f6b28210 EDX: 00000001 [ 134.576038] ESI: 0000006e EDI: f660e000 EBP: f7092d6c ESP: f7092d64 [ 134.576038] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 134.576038] Process khubd (pid: 268, ti=f7092000 task=f71330c0 task.ti=f7092000) [ 134.576038] Stack: [ 134.576038] f660e014 00000000 f7092d84 c12234be 00000001 f660e188 f660e188 f660e000 [ 134.576038] <0> f7092db0 c121c291 00000296 00000000 00000000 00000001 00000296 f660e000 [ 134.576038] <0> f660e000 f7240800 00000000 f7092db8 c121c4cd f7092de4 c12ee98c 00000002 [ 134.576038] Call Trace: [ 134.576038] [<c12234be>] ? tty_ldisc_hangup+0x1ae/0x1e0 [ 134.576038] [<c121c291>] ? do_tty_hangup+0x111/0x340 [ 134.576038] [<c121c4cd>] ? tty_vhangup+0xd/0x10 [ 134.576038] [<c12ee98c>] ? usb_serial_disconnect+0x8c/0x170 [ 134.576038] [<c12c6831>] ? usb_unbind_interface+0xf1/0x130 [ 134.576038] [<c125b972>] ? __device_release_driver+0x72/0xd0 [ 134.576038] [<c125ba90>] ? device_release_driver+0x20/0x40 [ 134.576038] [<c125ae6c>] ? bus_remove_device+0x7c/0xe0 [ 134.576038] [<c1258c97>] ? device_remove_attrs+0x37/0xb0 [ 134.576038] [<c1258e14>] ? device_del+0x104/0x1a0 [ 134.576038] [<c12c33bc>] ? usb_disable_device+0xbc/0x1f0 [ 134.576038] [<c12bcfa5>] ? usb_disconnect+0xb5/0x1b0 [ 134.576038] [<c12be91f>] ? hub_thread+0x64f/0x17e0 [ 134.576038] [<c103234e>] ? try_to_wake_up+0xbe/0x380 [ 134.576038] [<c104a8d0>] ? autoremove_wake_function+0x0/0x50 [ 134.576038] [<c12be2d0>] ? hub_thread+0x0/0x17e0 [ 134.576038] [<c104a684>] ? kthread+0x74/0x80 [ 134.576038] [<c104a610>] ? kthread+0x0/0x80 [ 134.576038] [<c10039ff>] ? kernel_thread_helper+0x7/0x18 [ 134.576038] Code: 34 e8 c7 fe ff ff 89 f0 c7 43 34 00 00 00 00 e8 d9 fc ff ff 3d 00 f0 ff ff 77 10 89 43 34 89 f2 89 d8 e8 b6 fd ff [ 134.576038] EIP: [<c122323e>] tty_ldisc_reinit+0x3e/0x50 SS:ESP 0068:f7092d64 [ 134.813426] ---[ end trace dd3cfdb471d33e40 ]---
I'd like to flag this patch for possible stable inclusion.
PATCH 11/19 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
In reply to Greg KHFrom: Lawrence Rust <[email protected]>
Calling tcsetattr prevents any thread(s) currently suspended in ioctl TIOCMIWAIT for the same device from ever resuming.
If a thread is suspended inside a call to ioctl TIOCMIWAIT, waiting for a modem status change, then the 8250 driver enables modem status interrupts (MSI). The device interrupt service routine resumes the suspended thread(s) on the next MSI.
If while the thread(s) are suspended, another thread calls tcsetattr then the 8250 driver disables MSI (unless CTS/RTS handshaking is enabled) thus preventing the suspended thread(s) from ever being resumed.
This patch only disables MSI in tcsetattr handling if there are no suspended threads.
Program to demonstrate bug & fix:
/* gcc miwait.c -o miwait -l pthread */
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <linux/serial.h>
static void* monitor( void* pv);
static int s_fd;
int main( void)
{
const char kszDev[] = "/dev/ttyS0";
pthread_t t;
struct termios tio;
s_fd = open( kszDev, O_RDWR | O_NONBLOCK);
if ( s_fd < 0)
return fprintf( stderr, "Error(%d) opening %s: %s\n", errno, kszDev, strerror( errno)), 1;
pthread_create( &t, NULL, &monitor, NULL);
/* Modem status changes seen here */
puts( "Main: awaiting status changes");
sleep( 5);
tcgetattr( s_fd, &tio);
tio.c_cflag ^= CSTOPB;
/* But not after here */
puts( "Main: tcsetattr called");
tcsetattr( s_fd, TCSANOW, &tio);
for (;;)
sleep( 1);
}static void* monitor( void* pv)
{
(void)pv;
for(;;)
{
unsigned uModem;
struct serial_icounter_struct cnt;
if ( ioctl( s_fd, TIOCMGET, &uModem) < 0)
fprintf( stderr, "Error(%d) in TIOCMGET: %s\n", errno, strerror( errno));
printf( "Modem status:%s%s%s%s%s%s\n",
(uModem & TIOCM_RTS) ? " RTS" : "",
(uModem & TIOCM_DTR) ? " DTR" : "",
(uModem & TIOCM_CTS) ? " CTS" : "",
(uModem & TIOCM_DSR) ? " DSR" : "",
(uModem & TIOCM_CD) ? " CD" : "",
(uModem & TIOCM_RI) ? " RI" : ""
);
if ( ioctl( s_fd, TIOCGICOUNT, &cnt) < 0)
fprintf( stderr, "Error(%d) in TIOCGICOUNT: %s\n", errno, strerror( errno));
printf( "Irqs: CTS:%d DSR:%d RNG:%d DCD:%d Rx:%d Tx:%d Frame:%d Orun:%d Par:%d Brk:%d Oflow:%d\n",
cnt.cts, cnt.dsr, cnt.rng, cnt.dcd,
cnt.rx, cnt.tx, cnt.frame, cnt.overrun, cnt.parity,
cnt.brk, cnt.buf_overrun
);
fputs( "Waiting...", stdout), fflush( stdout);
if ( 0 > ioctl( s_fd, TIOCMIWAIT, (unsigned long)(TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS)))
fprintf( stderr, "\nError(%d) in TIOCMIWAIT: %s\n", errno, strerror( errno));
fputs( "\n", stdout);
} return NULL;
}
Signed-off by Lawrence Rust <[email protected]>
--- drivers/serial/8250.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
drivers/serial/8250.c +4 -1
@@ -2343,8 +2343,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,/* * CTS flow control flag and modem status interrupts +* Only disable MSI if no threads are waiting in +* serial_core::uart_wait_modem_status */ - up->ier &= ~UART_IER_MSI ; +if (!waitqueue_active (&up->port.state->port.delta_msr_wait)) + up->ier &= ~UART_IER_MSI ;if (!(up->bugs &UART_BUG_NOMSR ) &&UART_ENABLE_MS (&up->port, termios->c_cflag)) up->ier |=UART_IER_MSI ;
Signature · 1 line
1.7.1
Re: [PATCH 11/19] 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
Hi.
This one kills the serial console for me. Luckily, in qemu:
(gdb) bt
#0 __const_udelay (xloops=4295000) at arch/x86/lib/delay.c:117 #1 0xc137ab7c in panic (fmt=0xc147f8e1 "Attempted to kill the idle task!")
at kernel/panic.c:151
#2 0xc1020731 in do_exit (code=9) at kernel/exit.c:915
#3 0xc100476a in oops_end (flags=70, regs=<value optimized out>, signr=9)
at arch/x86/kernel/dumpstack.c:265
#4 0xc1014317 in no_context (regs=0xc14ebe68, error_code=<value
optimized out>,
address=192) at arch/x86/mm/fault.c:673
#5 0xc1014411 in __bad_area_nosemaphore (regs=0xc14ebe68,
error_code=<value optimized out>, address=192, si_code=196609)
at arch/x86/mm/fault.c:739
#6 0xc1014426 in bad_area_nosemaphore (regs=0x418958, error_code=81,
address=3238124885) at arch/x86/mm/fault.c:746
#7 0xc101475a in do_page_fault (regs=0xc14ebe68, error_code=0)
at arch/x86/mm/fault.c:1070#8 0xc137ced9 in ?? () at arch/x86/kernel/entry_32.S:1265 #9 0xc11db236 in list_empty (head=0xc0) at include/linux/list.h:182 #10 0xc11db374 in waitqueue_active (q=0x98) at include/linux/wait.h:115 #11 0xc11dea4e in serial8250_do_set_termios (port=0xc1c31320, termios=0xc14ebf2c,
old=0xc1c31240) at drivers/serial/8250.c:2349
#12 0xc11decb6 in serial8250_set_termios (port=0xc1c31320, termios=0xc14ebf2c,
old=0xc1c31240) at drivers/serial/8250.c:2424
#13 0xc11da10b in uart_set_options (port=0xc1c31320, co=0xc164f0a0, baud=9600,
parity=110, bits=8, flow=110) at drivers/serial/serial_core.c:1935
#14 0xc1684d30 in serial8250_console_setup (co=0xc164f0a0, options=0x0)
at drivers/serial/8250.c:2864#15 0xc101e46f in register_console (newcon=0xc164f0a0) at kernel/printk.c:1300 #16 0xc1684d5e in serial8250_console_init () at drivers/serial/8250.c:2889 #17 0xc1683da0 in console_init () at drivers/tty/tty_io.c:3208 #18 0xc166b7ba in start_kernel () at init/main.c:635
#19 0xc166b0b7 in i386_start_kernel () at arch/x86/kernel/head32.c:75 #20 0x00000000 in ?? ()
(gdb) p up->port.state
$13 = (struct uart_state *) 0x0
Quoted 128 lines · Greg Kroah-Hartman
From: Lawrence Rust <[email protected]>
Calling tcsetattr prevents any thread(s) currently suspended in ioctl TIOCMIWAIT for the same device from ever resuming.
If a thread is suspended inside a call to ioctl TIOCMIWAIT, waiting for a modem status change, then the 8250 driver enables modem status interrupts (MSI). The device interrupt service routine resumes the suspended thread(s) on the next MSI.
If while the thread(s) are suspended, another thread calls tcsetattr then the 8250 driver disables MSI (unless CTS/RTS handshaking is enabled) thus preventing the suspended thread(s) from ever being resumed.
This patch only disables MSI in tcsetattr handling if there are no suspended threads.
Program to demonstrate bug & fix:
/* gcc
miwait.c-o miwait -l pthread */
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <linux/serial.h>static void*
monitor( void* pv);
static ints_fd;int main( void)
{
const char kszDev[] = "/dev/ttyS0";
pthread_t t;
struct termios tio;s_fd =
open( kszDev, O_RDWR | O_NONBLOCK);
if (s_fd< 0)
returnfprintf( stderr, "Error(%d) opening %s: %s\n", errno, kszDev, strerror( errno)), 1;pthread_create( &t, NULL, &monitor, NULL);
/* Modem status changes seen here */
puts( "Main: awaiting status changes");
sleep( 5);tcgetattr(
s_fd, &tio);
tio.c_cflag ^= CSTOPB;/* But not after here */
puts( "Main: tcsetattr called");
tcsetattr(s_fd, TCSANOW, &tio);for (;;)
sleep( 1);
}static void*
monitor( void* pv)
{
(void)pv;
for(;;)
{
unsigned uModem;
structserial_icounter_structcnt;if (
ioctl( s_fd, TIOCMGET, &uModem)< 0)
fprintf( stderr, "Error(%d) in TIOCMGET: %s\n", errno, strerror( errno)); printf( "Modem status:%s%s%s%s%s%s\n",
(uModem &TIOCM_RTS) ? " RTS" : "",
(uModem &TIOCM_DTR) ? " DTR" : "",
(uModem &TIOCM_CTS) ? " CTS" : "",
(uModem &TIOCM_DSR) ? " DSR" : "",
(uModem &TIOCM_CD) ? " CD" : "",
(uModem &TIOCM_RI) ? " RI" : ""
);if (
ioctl( s_fd, TIOCGICOUNT, &cnt)< 0)
fprintf( stderr, "Error(%d) in TIOCGICOUNT: %s\n", errno, strerror( errno)); printf( "Irqs: CTS:%d DSR:%d RNG:%d DCD:%d Rx:%d Tx:%d Frame:%d Orun:%d Par:%d Brk:%d Oflow:%d\n", cnt.cts, cnt.dsr, cnt.rng, cnt.dcd,
cnt.rx, cnt.tx, cnt.frame, cnt.overrun, cnt.parity,
cnt.brk, cnt.buf_overrun
);fputs( "Waiting...", stdout), fflush( stdout);
if ( 0 >ioctl( s_fd, TIOCMIWAIT, (unsigned long)(TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS)))fprintf( stderr, "\nError(%d) in TIOCMIWAIT: %s\n", errno, strerror( errno));fputs( "\n", stdout);
}
return NULL;
}Signed-off by Lawrence Rust <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>---
drivers/serial/8250.c | 5 ++++-1 files changed, 4 insertions(+), 1 deletions(-)drivers/serial/8250.c +4
-1@@ -2343,8 +2343,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, /* * CTS flow control flag and modem status interrupts + * Only disable MSI if no threads are waiting in + * serial_core::uart_wait_modem_status */ - up->ier &= ~UART_IER_MSI; + if (!waitqueue_active(&up->port.state->port.delta_msr_wait)) + up->ier &= ~UART_IER_MSI;if (!(up->bugs &
UART_BUG_NOMSR) &&UART_ENABLE_MS(&up->port, termios->c_cflag))up->ier|=UART_IER_MSI;
--
1.7.1--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH 11/19] 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
Quoted 33 lines · Alexey Zaytsev
Hi.
This one kills the serial console for me. Luckily, in qemu:
(gdb) bt
#0__const_udelay(xloops=4295000) atarch/x86/lib/delay.c:117#10xc137ab7cin panic (fmt=0xc147f8e1 "Attempted to kill the idle task!")at kernel/panic.c:151 #2 0xc1020731 in do_exit (code=9) at kernel/exit.c:915 #3 0xc100476a in oops_end (flags=70, regs=<value optimized out>, signr=9) at arch/x86/kernel/dumpstack.c:265 #4 0xc1014317 in no_context (regs=0xc14ebe68, error_code=<value optimized out>, address=192) at arch/x86/mm/fault.c:673 #5 0xc1014411 in __bad_area_nosemaphore (regs=0xc14ebe68, error_code=<value optimized out>, address=192, si_code=196609) at arch/x86/mm/fault.c:739 #6 0xc1014426 in bad_area_nosemaphore (regs=0x418958, error_code=81, address=3238124885) at arch/x86/mm/fault.c:746 #7 0xc101475a in do_page_fault (regs=0xc14ebe68, error_code=0) at arch/x86/mm/fault.c:1070#8
0xc137ced9in ?? () atarch/x86/kernel/entry_32.S:1265#90xc11db236inlist_empty(head=0xc0) atinclude/linux/list.h:182#100xc11db374inwaitqueue_active(q=0x98) atinclude/linux/wait.h:115#110xc11dea4einserial8250_do_set_termios(port=0xc1c31320, termios=0xc14ebf2c,old=0xc1c31240) at drivers/serial/8250.c:2349 #12 0xc11decb6 in serial8250_set_termios (port=0xc1c31320, termios=0xc14ebf2c, old=0xc1c31240) at drivers/serial/8250.c:2424 #13 0xc11da10b in uart_set_options (port=0xc1c31320, co=0xc164f0a0, baud=9600, parity=110, bits=8, flow=110) at drivers/serial/serial_core.c:1935 #14 0xc1684d30 in serial8250_console_setup (co=0xc164f0a0, options=0x0) at drivers/serial/8250.c:2864
Quoted 9 lines
#15
0xc101e46finregister_console(newcon=0xc164f0a0) atkernel/printk.c:1300#160xc1684d5einserial8250_console_init() atdrivers/serial/8250.c:2889#170xc1683da0inconsole_init() atdrivers/tty/tty_io.c:3208#180xc166b7bainstart_kernel() atinit/main.c:635
#190xc166b0b7ini386_start_kernel() atarch/x86/kernel/head32.c:75#200x00000000in ?? ()
(gdb) pup->port.state
$13 = (structuart_state*)0x0
Ick.
Lawrence, any ideas? If not, I'm going to have to revert this patch from the tree.
thanks,
greg k-h
Quoted 131 lines · Greg Kroah-Hartman
Quoted 128 lines
From: Lawrence Rust <[email protected]>
Calling tcsetattr prevents any thread(s) currently suspended in ioctl TIOCMIWAIT for the same device from ever resuming.
If a thread is suspended inside a call to ioctl TIOCMIWAIT, waiting for a modem status change, then the 8250 driver enables modem status interrupts (MSI). ??The device interrupt service routine resumes the suspended thread(s) on the next MSI.
If while the thread(s) are suspended, another thread calls tcsetattr then the 8250 driver disables MSI (unless CTS/RTS handshaking is enabled) thus preventing the suspended thread(s) from ever being resumed.
This patch only disables MSI in tcsetattr handling if there are no suspended threads.
Program to demonstrate bug & fix:
/* gcc
miwait.c-o miwait -l pthread */
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <linux/serial.h>static void*
monitor( void* pv);
static ints_fd;int main( void)
??{
??const char kszDev[] = "/dev/ttyS0";
??pthread_t t;
??struct termios tio;??s_fd =
open( kszDev, O_RDWR | O_NONBLOCK);
??if (s_fd< 0)
?? ??returnfprintf( stderr, "Error(%d) opening %s: %s\n", errno, kszDev, strerror( errno)), 1;??pthread_create( &t, NULL, &monitor, NULL);
??/* Modem status changes seen here */
??puts( "Main: awaiting status changes");
??sleep( 5);??tcgetattr(
s_fd, &tio);
??tio.c_cflag ^= CSTOPB;??/* But not after here */
??puts( "Main: tcsetattr called");
??tcsetattr(s_fd, TCSANOW, &tio);??for (;;)
?? ??sleep( 1);
??}static void*
monitor( void* pv)
??{
??(void)pv;
??for(;;)
?? ??{
?? ??unsigned uModem;
?? ??structserial_icounter_structcnt;?? ??if (
ioctl( s_fd, TIOCMGET, &uModem)< 0)
?? ?? ??fprintf( stderr, "Error(%d) in TIOCMGET: %s\n", errno, strerror( errno)); ?? ??printf( "Modem status:%s%s%s%s%s%s\n",
?? ?? ??(uModem &TIOCM_RTS) ? " RTS" : "",
?? ?? ??(uModem &TIOCM_DTR) ? " DTR" : "",
?? ?? ??(uModem &TIOCM_CTS) ? " CTS" : "",
?? ?? ??(uModem &TIOCM_DSR) ? " DSR" : "",
?? ?? ??(uModem &TIOCM_CD) ? " CD" : "",
?? ?? ??(uModem &TIOCM_RI) ? " RI" : ""
?? ??);?? ??if (
ioctl( s_fd, TIOCGICOUNT, &cnt)< 0)
?? ?? ??fprintf( stderr, "Error(%d) in TIOCGICOUNT: %s\n", errno, strerror( errno)); ?? ??printf( "Irqs: CTS:%d DSR:%d RNG:%d DCD:%d Rx:%d Tx:%d Frame:%d Orun:%d Par:%d Brk:%d Oflow:%d\n", ?? ?? ??cnt.cts, cnt.dsr, cnt.rng, cnt.dcd,
?? ?? ??cnt.rx, cnt.tx, cnt.frame, cnt.overrun, cnt.parity,
?? ?? ??cnt.brk, cnt.buf_overrun
?? ??);?? ??fputs( "Waiting...", stdout), fflush( stdout);
?? ??if ( 0 >ioctl( s_fd, TIOCMIWAIT, (unsigned long)(TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS))) ?? ?? ??fprintf( stderr, "\nError(%d) in TIOCMIWAIT: %s\n", errno, strerror( errno)); ?? ??fputs( "\n", stdout);
?? ??}
??return NULL;
??}Signed-off by Lawrence Rust <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>---
??drivers/serial/8250.c | ?? ??5 ++++-
??1 files changed, 4 insertions(+), 1 deletions(-)drivers/serial/8250.c +0
-0@@ -2343,8 +2343,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,?? ?? ?? ??/*
?? ?? ?? ?? * CTS flow control flag and modem status interrupts
+ ?? ?? ?? ??* Only disable MSI if no threads are waiting in
+ ?? ?? ?? ??*serial_core::uart_wait_modem_status
?? ?? ?? ?? */
- ?? ?? ??up->ier&= ~UART_IER_MSI;
+ ?? ?? ?? if (!waitqueue_active(&up->port.state->port.delta_msr_wait))
+ ?? ?? ?? ?? ?? ?? ??up->ier&= ~UART_IER_MSI;
?? ?? ?? ??if (!(up->bugs &UART_BUG_NOMSR) &&
?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??UART_ENABLE_MS(&up->port,termios->c_cflag)) ?? ?? ?? ?? ?? ?? ?? ??up->ier |=UART_IER_MSI;
--
1.7.1--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at ??http://vger.kernel.org/majordomo-info.html Please read the FAQ at ??http://www.tux.org/lkml/
Re: [PATCH 11/19] 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
Quoted 2 lines
Lawrence, any ideas? If not, I'm going to have to revert this patch from the tree.
Peering into the waitqueues like that isn't going to work.
I'd suggest simply keeping a proper count (locked) of the number of people sitting in TIOCMIWAIT, and probably do it in serial_core (because the bug doesn't look 8250 specific)
Alan
Re: [PATCH 11/19] 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
In reply to Greg KHQuoted 44 lines · Greg KH
Quoted 33 lines · Alexey Zaytsev
Hi.
This one kills the serial console for me. Luckily, in qemu:
(gdb) bt
#0__const_udelay(xloops=4295000) atarch/x86/lib/delay.c:117#10xc137ab7cin panic (fmt=0xc147f8e1 "Attempted to kill the idle task!")at kernel/panic.c:151 #2 0xc1020731 in do_exit (code=9) at kernel/exit.c:915 #3 0xc100476a in oops_end (flags=70, regs=<value optimized out>, signr=9) at arch/x86/kernel/dumpstack.c:265 #4 0xc1014317 in no_context (regs=0xc14ebe68, error_code=<value optimized out>, address=192) at arch/x86/mm/fault.c:673 #5 0xc1014411 in __bad_area_nosemaphore (regs=0xc14ebe68, error_code=<value optimized out>, address=192, si_code=196609) at arch/x86/mm/fault.c:739 #6 0xc1014426 in bad_area_nosemaphore (regs=0x418958, error_code=81, address=3238124885) at arch/x86/mm/fault.c:746 #7 0xc101475a in do_page_fault (regs=0xc14ebe68, error_code=0) at arch/x86/mm/fault.c:1070#8
0xc137ced9in ?? () atarch/x86/kernel/entry_32.S:1265#90xc11db236inlist_empty(head=0xc0) atinclude/linux/list.h:182#100xc11db374inwaitqueue_active(q=0x98) atinclude/linux/wait.h:115#110xc11dea4einserial8250_do_set_termios(port=0xc1c31320, termios=0xc14ebf2c,old=0xc1c31240) at drivers/serial/8250.c:2349 #12 0xc11decb6 in serial8250_set_termios (port=0xc1c31320, termios=0xc14ebf2c, old=0xc1c31240) at drivers/serial/8250.c:2424 #13 0xc11da10b in uart_set_options (port=0xc1c31320, co=0xc164f0a0, baud=9600, parity=110, bits=8, flow=110) at drivers/serial/serial_core.c:1935 #14 0xc1684d30 in serial8250_console_setup (co=0xc164f0a0, options=0x0) at drivers/serial/8250.c:2864Quoted 9 lines
#15
0xc101e46finregister_console(newcon=0xc164f0a0) atkernel/printk.c:1300#160xc1684d5einserial8250_console_init() atdrivers/serial/8250.c:2889#170xc1683da0inconsole_init() atdrivers/tty/tty_io.c:3208#180xc166b7bainstart_kernel() atinit/main.c:635
#190xc166b0b7ini386_start_kernel() atarch/x86/kernel/head32.c:75#200x00000000in ?? ()
(gdb) pup->port.state
$13 = (structuart_state*)0x0
Quoted 4 lines
Ick.
Lawrence, any ideas? If not, I'm going to have to revert this patch from the tree.
Maybe best to pull the patch for now and have a re-think. Shame, it seemed so easy and the fix works for me with a simple modem input. I'll re-submit later..
-- Lawrence
Quoted 136 lines
thanks,
greg k-h
Quoted 131 lines · Greg Kroah-Hartman
Quoted 128 lines
From: Lawrence Rust <[email protected]>
Calling tcsetattr prevents any thread(s) currently suspended in ioctl TIOCMIWAIT for the same device from ever resuming.
If a thread is suspended inside a call to ioctl TIOCMIWAIT, waiting for a modem status change, then the 8250 driver enables modem status interrupts (MSI). ??The device interrupt service routine resumes the suspended thread(s) on the next MSI.
If while the thread(s) are suspended, another thread calls tcsetattr then the 8250 driver disables MSI (unless CTS/RTS handshaking is enabled) thus preventing the suspended thread(s) from ever being resumed.
This patch only disables MSI in tcsetattr handling if there are no suspended threads.
Program to demonstrate bug & fix:
/* gcc
miwait.c-o miwait -l pthread */
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#include <termios.h>
#include <sys/ioctl.h>
#include <linux/serial.h>static void*
monitor( void* pv);
static ints_fd;int main( void)
??{
??const char kszDev[] = "/dev/ttyS0";
??pthread_t t;
??struct termios tio;??s_fd =
open( kszDev, O_RDWR | O_NONBLOCK);
??if (s_fd< 0)
?? ??returnfprintf( stderr, "Error(%d) opening %s: %s\n", errno, kszDev, strerror( errno)), 1;??pthread_create( &t, NULL, &monitor, NULL);
??/* Modem status changes seen here */
??puts( "Main: awaiting status changes");
??sleep( 5);??tcgetattr(
s_fd, &tio);
??tio.c_cflag ^= CSTOPB;??/* But not after here */
??puts( "Main: tcsetattr called");
??tcsetattr(s_fd, TCSANOW, &tio);??for (;;)
?? ??sleep( 1);
??}static void*
monitor( void* pv)
??{
??(void)pv;
??for(;;)
?? ??{
?? ??unsigned uModem;
?? ??structserial_icounter_structcnt;?? ??if (
ioctl( s_fd, TIOCMGET, &uModem)< 0)
?? ?? ??fprintf( stderr, "Error(%d) in TIOCMGET: %s\n", errno, strerror( errno)); ?? ??printf( "Modem status:%s%s%s%s%s%s\n",
?? ?? ??(uModem &TIOCM_RTS) ? " RTS" : "",
?? ?? ??(uModem &TIOCM_DTR) ? " DTR" : "",
?? ?? ??(uModem &TIOCM_CTS) ? " CTS" : "",
?? ?? ??(uModem &TIOCM_DSR) ? " DSR" : "",
?? ?? ??(uModem &TIOCM_CD) ? " CD" : "",
?? ?? ??(uModem &TIOCM_RI) ? " RI" : ""
?? ??);?? ??if (
ioctl( s_fd, TIOCGICOUNT, &cnt)< 0)
?? ?? ??fprintf( stderr, "Error(%d) in TIOCGICOUNT: %s\n", errno, strerror( errno)); ?? ??printf( "Irqs: CTS:%d DSR:%d RNG:%d DCD:%d Rx:%d Tx:%d Frame:%d Orun:%d Par:%d Brk:%d Oflow:%d\n", ?? ?? ??cnt.cts, cnt.dsr, cnt.rng, cnt.dcd,
?? ?? ??cnt.rx, cnt.tx, cnt.frame, cnt.overrun, cnt.parity,
?? ?? ??cnt.brk, cnt.buf_overrun
?? ??);?? ??fputs( "Waiting...", stdout), fflush( stdout);
?? ??if ( 0 >ioctl( s_fd, TIOCMIWAIT, (unsigned long)(TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS))) ?? ?? ??fprintf( stderr, "\nError(%d) in TIOCMIWAIT: %s\n", errno, strerror( errno)); ?? ??fputs( "\n", stdout);
?? ??}
??return NULL;
??}Signed-off by Lawrence Rust <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>---
??drivers/serial/8250.c | ?? ??5 ++++-
??1 files changed, 4 insertions(+), 1 deletions(-)drivers/serial/8250.c +0
-0@@ -2343,8 +2343,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,?? ?? ?? ??/*
?? ?? ?? ?? * CTS flow control flag and modem status interrupts
+ ?? ?? ?? ??* Only disable MSI if no threads are waiting in
+ ?? ?? ?? ??*serial_core::uart_wait_modem_status
?? ?? ?? ?? */
- ?? ?? ??up->ier&= ~UART_IER_MSI;
+ ?? ?? ?? if (!waitqueue_active(&up->port.state->port.delta_msr_wait))
+ ?? ?? ?? ?? ?? ?? ??up->ier&= ~UART_IER_MSI;
?? ?? ?? ??if (!(up->bugs &UART_BUG_NOMSR) &&
?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??UART_ENABLE_MS(&up->port,termios->c_cflag)) ?? ?? ?? ?? ?? ?? ?? ??up->ier |=UART_IER_MSI;
--
1.7.1--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at ??http://vger.kernel.org/majordomo-info.html Please read the FAQ at ??http://www.tux.org/lkml/
Signature · 1 line
Lawrence
Re: [PATCH 11/19] 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
Quoted 45 lines · Lawrence Rust
Quoted 44 lines · Greg KH
Quoted 42 lines · Alexey Zaytsev
Hi.
This one kills the serial console for me. Luckily, in qemu:
(gdb) bt
#0__const_udelay(xloops=4295000) atarch/x86/lib/delay.c:117#10xc137ab7cin panic (fmt=0xc147f8e1 "Attempted to kill the idle task!")at kernel/panic.c:151 #2 0xc1020731 in do_exit (code=9) at kernel/exit.c:915 #3 0xc100476a in oops_end (flags=70, regs=<value optimized out>, signr=9) at arch/x86/kernel/dumpstack.c:265 #4 0xc1014317 in no_context (regs=0xc14ebe68, error_code=<value optimized out>, address=192) at arch/x86/mm/fault.c:673 #5 0xc1014411 in __bad_area_nosemaphore (regs=0xc14ebe68, error_code=<value optimized out>, address=192, si_code=196609) at arch/x86/mm/fault.c:739 #6 0xc1014426 in bad_area_nosemaphore (regs=0x418958, error_code=81, address=3238124885) at arch/x86/mm/fault.c:746 #7 0xc101475a in do_page_fault (regs=0xc14ebe68, error_code=0) at arch/x86/mm/fault.c:1070#8
0xc137ced9in ?? () atarch/x86/kernel/entry_32.S:1265#90xc11db236inlist_empty(head=0xc0) atinclude/linux/list.h:182#100xc11db374inwaitqueue_active(q=0x98) atinclude/linux/wait.h:115#110xc11dea4einserial8250_do_set_termios(port=0xc1c31320, termios=0xc14ebf2c,old=0xc1c31240) at drivers/serial/8250.c:2349 #12 0xc11decb6 in serial8250_set_termios (port=0xc1c31320, termios=0xc14ebf2c, old=0xc1c31240) at drivers/serial/8250.c:2424 #13 0xc11da10b in uart_set_options (port=0xc1c31320, co=0xc164f0a0, baud=9600, parity=110, bits=8, flow=110) at drivers/serial/serial_core.c:1935 #14 0xc1684d30 in serial8250_console_setup (co=0xc164f0a0, options=0x0) at drivers/serial/8250.c:2864#15
0xc101e46finregister_console(newcon=0xc164f0a0) atkernel/printk.c:1300#160xc1684d5einserial8250_console_init() atdrivers/serial/8250.c:2889#170xc1683da0inconsole_init() atdrivers/tty/tty_io.c:3208#180xc166b7bainstart_kernel() atinit/main.c:635
#190xc166b0b7ini386_start_kernel() atarch/x86/kernel/head32.c:75#200x00000000in ?? ()
(gdb) pup->port.state
$13 = (structuart_state*)0x0
Quoted 8 lines
Quoted 4 lines
Ick.
Lawrence, any ideas? If not, I'm going to have to revert this patch from the tree.
Maybe best to pull the patch for now and have a re-think. Shame, it seemed so easy and the fix works for me with a simple modem input. I'll re-submit later..
Linus has now reverted it in his tree.
thanks,
greg k-h
PATCH 12/19 amiserial: Remove unused variable icount
In reply to Greg KHFrom: Geert Uytterhoeven <[email protected]>
drivers/char/amiserial.c: In function ?rs_ioctl?:drivers/char/amiserial.c:1302: warning: unused variable ?icount?
commit 0587102cf9f427c185bfdeb2cef41e13ee0264b1 ("tty: icount changeover for other main devices") removed the users, but not the actual variable.
--- drivers/char/amiserial.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
drivers/char/amiserial.c +0 -1
@@ -1299,7 +1299,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, {struct async_struct * info = tty->driver_data;struct async_icount cprev, cnow;/* kernel counter temps */ -struct serial_icounter_struct icount;void __user *argp = (void __user *)arg;unsigned long flags;
Signature · 1 line
1.7.1
PATCH 13/19 vcs: make proper usage of the poll flags
In reply to Greg KHFrom: Nicolas Pitre <[email protected]>
Kay Sievers pointed out that usage of POLLIN is well defined by POSIX, and the current usage here doesn't follow that definition. So let's duplicate the same semantics as implemented by sysfs_poll() instead.
--- drivers/tty/vt/vc_screen.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/tty/vt/vc_screen.c +3 -3
@@ -553,12 +553,12 @@ static unsigned int vcs_poll(struct file *file, poll_table *wait) { struct vcs_poll_data *poll = vcs_poll_data_get(file); -int ret =0 ; +int ret =DEFAULT_POLLMASK |POLLERR |POLLPRI ;if (poll) {poll_wait (file, &poll->waitq, wait); -if (!poll->seen_last_update) - ret =POLLIN |POLLRDNORM ; +if (poll->seen_last_update) + ret =DEFAULT_POLLMASK ; }return ret; }
Signature · 1 line
1.7.1
PATCH 14/19 serial: bfin_5xx: always include DMA headers
In reply to Greg KHFrom: Sonic Zhang <[email protected]>
On Blackfin systems, peripherals that have optional DMA support always route their interrupts through the corresponding DMA channel -- even when DMA is not being used. So in PIO mode, we still need to request the DMA channel (so interrupts are delivered) which means we need to always include the DMA header for the DMA defines/functions.
--- drivers/serial/bfin_5xx.c | 12 +++++++++--- 1 files changed, 9 insertions(+), 3 deletions(-)
drivers/serial/bfin_5xx.c +9 -3
@@ -23,6 +23,7 @@#include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial_core.h> +#include <linux/dma-mapping.h> #if defined(CONFIG_KGDB_SERIAL_CONSOLE ) || \ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE )
@@ -33,12 +34,10 @@#include <asm/gpio.h> #include <mach/bfin_serial_5xx.h> -#ifdef CONFIG_SERIAL_BFIN_DMA -#include <linux/dma-mapping.h> +#include <asm/dma.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/cacheflush.h> -#endif #ifdef CONFIG_SERIAL_BFIN_MODULE # undef CONFIG_EARLY_PRINTK
@@ -688,6 +687,13 @@ static int bfin_serial_startup(struct uart_port *port)# ifdef CONFIG_BF54x { +/* +* UART2 and UART3 on BF548 share interrupt PINs and DMA +* controllers with SPORT2 and SPORT3. UART rx and tx +* interrupts are generated in PIO mode only when configure +* their peripheral mapping registers properly, which means +* request corresponding DMA channels in PIO mode as well. +*/ unsigned uart_dma_ch_rx, uart_dma_ch_tx;switch (uart->port.irq) {
Signature · 1 line
1.7.1
PATCH 15/19 serial: bfin_5xx: remove redundant SSYNC to improve TX speed
In reply to Greg KHFrom: Sonic Zhang <[email protected]>
We don't need to force a SSYNC here as the LSR register will already be updated by the time we get back to reading it. This speeds up TX throughput and lowers general system overhead (since SSYNC is system wide, not peripheral-specific).
--- drivers/serial/bfin_5xx.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
drivers/serial/bfin_5xx.c +0 -1
@@ -359,7 +359,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)UART_PUT_CHAR (uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail +1 ) & (UART_XMIT_SIZE -1 ); uart->port.icount.tx++; -SSYNC (); }if (uart_circ_chars_pending (xmit) <WAKEUP_CHARS )
Signature · 1 line
1.7.1
PATCH 16/19 serial: bfin_5xx: disable CON_PRINTBUFFER for consoles
In reply to Greg KHFrom: Sonic Zhang <[email protected]>
If we are using early serial, don't let the normal console rewind the log buffer, since that causes things to be printed multiple times.
--- drivers/serial/bfin_5xx.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
drivers/serial/bfin_5xx.c +8 -0
@@ -1324,6 +1324,14 @@ struct console __init *bfin_earlyserial_init(unsigned int port,struct bfin_serial_port *uart;struct ktermios t; +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +/* +* If we are using early serial, don't let the normal console rewind +* log buffer, since that causes things to be printed multiple times +*/ + bfin_serial_console.flags &= ~CON_PRINTBUFFER ; +#endif +if (port ==-1 || port >= nr_active_ports) port =0 ;bfin_serial_init_ports ();
Signature · 1 line
1.7.1
PATCH 17/19 serial: bfin_5xx: grab port lock before making port termios changes
In reply to Greg KHFrom: Sonic Zhang <[email protected]>
The port lock exists to protect these resources, so we need to grab it before making changes.
--- drivers/serial/bfin_5xx.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/serial/bfin_5xx.c +2 -2
@@ -849,6 +849,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,if (termios->c_cflag &CMSPAR ) lcr |=STP ; +spin_lock_irqsave (&uart->port.lock, flags); + port->read_status_mask =OE ;if (termios->c_iflag &INPCK ) port->read_status_mask |= (FE |PE );
@@ -878,8 +880,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,if (termios->c_line !=N_IRDA ) quot -=ANOMALY_05000230 ; -spin_lock_irqsave (&uart->port.lock, flags); -UART_SET_ANOMALY_THRESHOLD (uart,USEC_PER_SEC / baud *15 );/* Disable UART */
Signature · 1 line
1.7.1
PATCH 18/19 n_gsm: Copy n2 over when configuring via ioctl interface
In reply to Greg KHFrom: Ken Mills <[email protected]>
The n2 field is settable but didn't get propogated
--- drivers/tty/n_gsm.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/tty/n_gsm.c +1 -0
@@ -2375,6 +2375,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm, gsm->mru = c->mru; gsm->encoding = c->encapsulation; gsm->adaption = c->adaption; + gsm->n2 = c->n2;if (c->i ==1 ) gsm->ftype =UIH ;
Signature · 1 line
1.7.1
PATCH 19/19 n_gsm: Fix length handling
In reply to Greg KHFrom: Ken Mills <[email protected]>
If the mux is configured with a large mru/mtu the existing code gets the byte ordering wrong for the header.
--- drivers/tty/n_gsm.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/tty/n_gsm.c +2 -2
@@ -716,8 +716,8 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)if (msg->len <128 ) *--dp = (msg->len <<1 ) |EA ;else { - *--dp = (msg->len >>6 ) |EA ; - *--dp = (msg->len &127 ) <<1 ; + *--dp = ((msg->len &127 ) <<1 ) |EA ; + *--dp = (msg->len >>6 ) &0xfe ; } }
Signature · 1 line
1.7.1
Quoted 18 lines · Greg KH
Here are a number of tty and serial fixes for your .37-rc1 tree.
Full details are below, but there's just a range of bug fixes all over the place, some of them having lived in the tree for quite some time, and it's nice to get them finally resolved.
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/tty-2.6.git/ tty-linusPatches will be sent to the linux-kernel mailing list, if anyone wants to see them.
thanks,
greg k-h
------------
Quoted 13 lines
MAINTAINERS | 4 +- drivers/char/amiserial.c | 1 - drivers/char/nozomi.c | 1 - drivers/char/pcmcia/synclink_cs.c | 1 + drivers/serial/8250.c | 5 +++- drivers/serial/8250_pci.c | 5 ++++ drivers/serial/bfin_5xx.c | 31 ++++++++++++++++------- drivers/tty/n_gsm.c | 5 ++- drivers/tty/tty_buffer.c | 14 +++++++++- drivers/tty/tty_ldisc.c | 49 +++++++++++++++++++++++++++++++----- drivers/tty/vt/vc_screen.c | 6 ++-- include/linux/tty.h | 2 +- 12 files changed, 94 insertions(+), 30 deletions(-)
I think one of these commits is causing the following boot crash in -tip:
Console: colour VGA+ 80x25
BUG: unable to handle kernel NULL pointer dereference at 0000000000000158 IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.37-rc1-tip-02017-gba4813e-dirty #62970 /
RIP: 0010:[<ffffffff811ebcb4>] [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 RSP: 0000:ffffffff8152fd88 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffffffff8207aa80 RCX: 0000000000002060 RDX: 0000000000000158 RSI: 0000000000000000 RDI: ffffffff8207aa80 RBP: ffffffff8152fdd8 R08: 000000000000000a R09: 000000000001c200 R10: 0000000000000025 R11: ffffffff81cec340 R12: 0000000000000013 R13: ffffffff8152fe08 R14: 0000000000000001 R15: 000000000001c200 FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000158 CR3: 000000000153f000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffffffff8152e000, task ffffffff81547020) Stack: ffffffff815567e0 ffffffff8207aa00 0000000000000286 00ffffff8207aa10 000000000000006e 000000000001c200 ffffffff8207aa80 ffffffff815762c0 000000000000006e 000000000000006e ffffffff8152fde8 ffffffff811ebf35 Call Trace: [<ffffffff811ebf35>] serial8250_set_termios+0x25/0x30 [<ffffffff811e6663>] uart_set_options+0xf3/0x170 [<ffffffff81798f55>] serial8250_console_setup+0xa8/0xaf [<ffffffff8104ac1a>] register_console+0x22a/0x390 [<ffffffff81799117>] serial8250_console_init+0x28/0x2c [<ffffffff81797a5c>] console_init+0x19/0x2a [<ffffffff81778b4d>] start_kernel+0x27d/0x407 [<ffffffff81778347>] x86_64_start_reservations+0x132/0x136 [<ffffffff81778451>] x86_64_start_kernel+0x106/0x115 Code: 98 00 00 00 41 f6 45 00 04 0f 85 a8 01 00 00 41 f6 45 08 80 75 07 83 8b 98 00 00 00 01 48 8b 83 a0 00 00 00 48 8d 90 58 01 00 00 <48> 39 90 58 01 00 00 0f 84 17 02 00 00 0f b6 93 c1 01 00 00 89 RIP [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 RSP <ffffffff8152fd88> CR2: 0000000000000158 ---[ end trace a7919e7f17c0a725 ]--- Kernel panic - not syncing: Fatal exception Pid: 0, comm: swapper Tainted: G D 2.6.37-rc1-tip-02017-gba4813e-dirty #62970 Call Trace: [<ffffffff8139148f>] panic+0x8c/0x19c [<ffffffff8104b745>] ? kmsg_dump+0x155/0x170 [<ffffffff8100f744>] oops_end+0xd4/0xf0 [<ffffffff81030a50>] no_context+0xf0/0x260 [<ffffffff81063910>] ? __kernel_text_address+0x40/0x70 [<ffffffff81030ce5>] __bad_area_nosemaphore+0x125/0x1e0 [<ffffffff81030dae>] bad_area_nosemaphore+0xe/0x10 [<ffffffff81031841>] do_page_fault+0x3d1/0x4a0 [<ffffffff8101867a>] ? save_stack_trace+0x2a/0x50 [<ffffffff8107810d>] ? __lock_acquire.clone.20+0x6fd/0xab0 [<ffffffff81395ad5>] page_fault+0x25/0x30 [<ffffffff811ebcb4>] ? serial8250_do_set_termios+0x1d4/0x430 [<ffffffff811ebc2d>] ? serial8250_do_set_termios+0x14d/0x430 [<ffffffff811ebf35>] serial8250_set_termios+0x25/0x30 [<ffffffff811e6663>] uart_set_options+0xf3/0x170 [<ffffffff81798f55>] serial8250_console_setup+0xa8/0xaf [<ffffffff8104ac1a>] register_console+0x22a/0x390 [<ffffffff81799117>] serial8250_console_init+0x28/0x2c [<ffffffff81797a5c>] console_init+0x19/0x2a [<ffffffff81778b4d>] start_kernel+0x27d/0x407 [<ffffffff81778347>] x86_64_start_reservations+0x132/0x136 [<ffffffff81778451>] x86_64_start_kernel+0x106/0x115
Rebooting in 1 seconds..Press any key to enter the menu
It crashed almost immediately after i merged Linus's 9457b24a0955 into -tip, we were on yesterday's f6614b7bb405 before that - so i think the crash is both pretty generic.
Thanks,
Ingo
#
# Automatically generated make config: don't edit
# Linux/x86_64 2.6.37-rc1 Kernel Configuration
# Sat Nov 13 17:32:15 2010
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_GENERIC_CMOS_UPDATE=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=yCONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_ARCH_HAS_CPU_IDLE_WAIT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_HAVE_CPUMASK_OF_CPU_MAP=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=yCONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" # CONFIG_KTIME_SCALAR is not setCONFIG_ARCH_CPU_PROBE_RELEASE=yCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_CONSTRUCTORS=yCONFIG_HAVE_IRQ_WORK=yCONFIG_IRQ_WORK=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not setCONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not setCONFIG_SWAP=y
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not setCONFIG_RCU_FANOUT=64CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=y
# CONFIG_IPC_NS is not setCONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not setCONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not setCONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=y
# CONFIG_UID16 is not setCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=y
# CONFIG_EPOLL is not setCONFIG_SIGNALFD=yCONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not setCONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=yCONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not setCONFIG_PCI_QUIRKS=yCONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not setCONFIG_SLOB=y
# CONFIG_PROFILING is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_JUMP_LABEL=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=mCONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=yCONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_X86_VSMP=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=yCONFIG_XEN=y
# CONFIG_XEN_PRIVILEGED_GUEST is not set CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=128 CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_KVM_CLOCK is not set CONFIG_KVM_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set CONFIG_GENERIC_CPU=yCONFIG_X86_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=12 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=yCONFIG_HPET_TIMER=y
# CONFIG_DMI is not setCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not setCONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set CONFIG_X86_CPUID=m CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set CONFIG_HAVE_MEMBLOCK=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
# CONFIG_SECCOMP is not set CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set CONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not setCONFIG_PM_VERBOSE=yCONFIG_CAN_PM_TRACE=yCONFIG_PM_TRACE=yCONFIG_PM_TRACE_RTC=yCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND_NVS=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_RUNTIME=yCONFIG_PM_OPS=yCONFIG_PM_OPP=y
# CONFIG_ACPI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=m CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=m CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set # CONFIG_CPU_IDLE is not set
#
# Memory power savings
#CONFIG_I7300_IDLE_IOAT_CHANNEL=yCONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_XEN=yCONFIG_PCI_DOMAINS=yCONFIG_PCI_CNB20LE_QUIRK=yCONFIG_PCIEPORTBUS=yCONFIG_PCIEAER=yCONFIG_PCIE_ECRC=yCONFIG_PCIEAER_INJECT=mCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEBUG=yCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not setCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=yCONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not setCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_HAVE_TEXT_POKE_SMP=yCONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=y
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not setCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not setCONFIG_NET_IPGRE_DEMUX=m
# CONFIG_NET_IPGRE is not setCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IP_PIMSM_V1 is not setCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=m
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not setCONFIG_INET_XFRM_MODE_TUNNEL=m
# CONFIG_INET_XFRM_MODE_BEET is not setCONFIG_INET_LRO=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not setCONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not setCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2_DEBUG=y
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#CONFIG_IP_DCCP_DEBUG=yCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not setCONFIG_TIPC=mCONFIG_TIPC_ADVANCED=yCONFIG_TIPC_ZONES=3CONFIG_TIPC_CLUSTERS=1CONFIG_TIPC_NODES=255CONFIG_TIPC_PORTS=8191CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not setCONFIG_ATM=m
# CONFIG_ATM_CLIP is not setCONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not setCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_L2TP=mCONFIG_L2TP_V3=yCONFIG_L2TP_IP=mCONFIG_L2TP_ETH=mCONFIG_STP=mCONFIG_BRIDGE=mCONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not setCONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not setCONFIG_IPX=m
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=mCONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not setCONFIG_X25=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not setCONFIG_PHONET=mCONFIG_PHONET_PIPECTRLR=yCONFIG_IEEE802154=m
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not setCONFIG_RPS=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not setCONFIG_CAN=m
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=mCONFIG_CAN_DEV=mCONFIG_CAN_CALC_BITTIMING=yCONFIG_CAN_MCP251X=mCONFIG_PCH_CAN=mCONFIG_CAN_SJA1000=m
# CONFIG_CAN_SJA1000_PLATFORM is not setCONFIG_CAN_EMS_PCI=mCONFIG_CAN_KVASER_PCI=mCONFIG_CAN_PLX_PCI=m
#
# CAN USB interfaces
#CONFIG_CAN_EMS_USB=mCONFIG_CAN_ESD_USB2=mCONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not setCONFIG_BT=m
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not setCONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_LL is not setCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=m
# CONFIG_BT_HCIBFUSB is not setCONFIG_BT_HCIVHCI=mCONFIG_BT_MRVL=mCONFIG_BT_ATH3K=mCONFIG_AF_RXRPC=mCONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not setCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
#
# Some wireless drivers require a rate control algorithm #
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=mCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=yCONFIG_DEBUG_DEVRES=yCONFIG_SYS_HYPERVISOR=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not setCONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=mCONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not setCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #CONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=mCONFIG_BLK_DEV_UB=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set CONFIG_XEN_BLKDEV_FRONTEND=mCONFIG_VIRTIO_BLK=mCONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RBD is not setCONFIG_MISC_DEVICES=yCONFIG_AD525X_DPOT=mCONFIG_AD525X_DPOT_I2C=mCONFIG_AD525X_DPOT_SPI=m
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not setCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=mCONFIG_SENSORS_BH1780=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not setCONFIG_TI_DAC7512=m
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not setCONFIG_PCH_PHUB=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not setCONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not setCONFIG_CB710_CORE=mCONFIG_CB710_DEBUG=yCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not setCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not setCONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not setCONFIG_SCSI_DH_EMC=m
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not setCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not setCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not setCONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not setCONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not setCONFIG_SATA_SVW=mCONFIG_SATA_ULI=m
# CONFIG_SATA_VIA is not setCONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not setCONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not setCONFIG_PATA_CS5520=m
# CONFIG_PATA_CS5530 is not setCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=mCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not setCONFIG_PATA_HPT3X3=mCONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not setCONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not setCONFIG_PATA_OLDPIIX=yCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PDC2027X=m
# CONFIG_PATA_PDC_OLD is not setCONFIG_PATA_RADISYS=mCONFIG_PATA_RDC=mCONFIG_PATA_SC1200=mCONFIG_PATA_SCH=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_SIL680=m
# CONFIG_PATA_SIS is not setCONFIG_PATA_TOSHIBA=mCONFIG_PATA_TRIFLEX=mCONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#CONFIG_PATA_CMD640_PCI=mCONFIG_PATA_MPIIX=m
# CONFIG_PATA_NS87410 is not setCONFIG_PATA_OPTI=m
# CONFIG_PATA_PLATFORM is not setCONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#CONFIG_ATA_GENERIC=mCONFIG_PATA_LEGACY=m
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not setCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not setCONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not setCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=m
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not setCONFIG_I2O_PROC=mCONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not setCONFIG_NETDEVICES=yCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_MACVLAN is not setCONFIG_EQUALIZER=m
# CONFIG_TUN is not setCONFIG_VETH=mCONFIG_ARCNET=m
# CONFIG_ARCNET_1201 is not setCONFIG_ARCNET_1051=m
# CONFIG_ARCNET_RAW is not set
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
# CONFIG_ARCNET_COM90xxIO is not setCONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not setCONFIG_MII=yCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set CONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=m
# CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=mCONFIG_VITESSE_PHY=mCONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set CONFIG_BCM63XX_PHY=mCONFIG_ICPLUS_PHY=mCONFIG_REALTEK_PHY=mCONFIG_NATIONAL_PHY=m
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set CONFIG_MICREL_PHY=m
# CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=mCONFIG_MDIO_GPIO=mCONFIG_NET_ETHERNET=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=m
# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not setCONFIG_DNET=m
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=m CONFIG_KSZ884X_PCI=mCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=yCONFIG_FORCEDETH=yCONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=mCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SMSC9420=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=mCONFIG_KS8851=mCONFIG_KS8851_MLL=m
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not setCONFIG_DL2K=m
# CONFIG_E1000 is not setCONFIG_E1000E=yCONFIG_IP1000=m
# CONFIG_IGB is not setCONFIG_IGBVF=mCONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set CONFIG_R8169=m
# CONFIG_R8169_VLAN is not set CONFIG_SIS190=mCONFIG_SKGE=y
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=yCONFIG_BNX2=m
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not setCONFIG_ATL1=m
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not setCONFIG_JME=mCONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_DA is not set
# CONFIG_STMMAC_DUAL_MAC is not set CONFIG_PCH_GBE=mCONFIG_NETDEV_10000=yCONFIG_MDIO=m
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=m CONFIG_CHELSIO_T4_DEPENDS=y CONFIG_CHELSIO_T4=m CONFIG_CHELSIO_T4VF_DEPENDS=y CONFIG_CHELSIO_T4VF=m
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set CONFIG_TEHUTI=mCONFIG_BNX2X=m
# CONFIG_QLCNIC is not setCONFIG_QLGE=mCONFIG_BNA=m
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not setCONFIG_WLAN=yCONFIG_AIRO=m
# CONFIG_ATMEL is not setCONFIG_PRISM54=m
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_CDC_PHONET is not setCONFIG_USB_IPHETH=mCONFIG_WAN=y
# CONFIG_HDLC is not setCONFIG_DLCI=mCONFIG_DLCI_MAX=8CONFIG_SBNI=mCONFIG_SBNI_MULTILINE=yCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=mCONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not setCONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_NICSTAR=mCONFIG_ATM_NICSTAR_USE_SUNI=y
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not setCONFIG_ATM_HORIZON=mCONFIG_ATM_HORIZON_DEBUG=yCONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
# CONFIG_ATM_FORE200E is not setCONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not setCONFIG_ATM_SOLOS=mCONFIG_IEEE802154_DRIVERS=mCONFIG_IEEE802154_FAKEHARD=m
#
# CAIF transport drivers
#
# CONFIG_XEN_NETDEV_FRONTEND is not setCONFIG_FDDI=m
# CONFIG_DEFXX is not setCONFIG_SKFP=m
# CONFIG_HIPPI is not setCONFIG_PLIP=m
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not setCONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not setCONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not setCONFIG_VMXNET3=mCONFIG_ISDN=y
# CONFIG_ISDN_I4L is not setCONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not setCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=m
# CONFIG_ISDN_CAPI_CAPIFS_BOOL is not set
#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
# CONFIG_CAPI_EICON is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_XEN_KBDDEV_FRONTEND is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5588=mCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not setCONFIG_KEYBOARD_TCA6416=m
# CONFIG_KEYBOARD_MATRIX is not setCONFIG_KEYBOARD_LM8323=mCONFIG_KEYBOARD_MAX7359=mCONFIG_KEYBOARD_MCS=m
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not setCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_SENTELIC=yCONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not setCONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_MOUSE_GPIO=mCONFIG_MOUSE_SYNAPTICS_I2C=mCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not setCONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not setCONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not setCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not setCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not setCONFIG_JOYSTICK_ZHENHUA=mCONFIG_JOYSTICK_DB9=m
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not setCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=mCONFIG_JOYSTICK_XPAD_FF=y
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not setCONFIG_INPUT_APANEL=m
# CONFIG_INPUT_ATI_REMOTE is not setCONFIG_INPUT_ATI_REMOTE2=m
# CONFIG_INPUT_KEYSPAN_REMOTE is not setCONFIG_INPUT_POWERMATE=m
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not setCONFIG_INPUT_GPIO_ROTARY_ENCODER=mCONFIG_INPUT_ADXL34X=mCONFIG_INPUT_ADXL34X_I2C=mCONFIG_INPUT_ADXL34X_SPI=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not setCONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not setCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not setCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not setCONFIG_NOZOMI=m
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=mCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not setCONFIG_SERIAL_MRST_MAX3110=m
# CONFIG_SERIAL_MFD_HSU is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_SERIAL_TIMBERDALE=m
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not setCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_TTY_PRINTK is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_HVC_XEN is not set
# CONFIG_VIRTIO_CONSOLE is not setCONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not setCONFIG_IPMI_POWEROFF=m
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not setCONFIG_R3964=m
# CONFIG_APPLICOM is not setCONFIG_MWAVE=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not setCONFIG_TCG_TPM=yCONFIG_TCG_TIS=yCONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not setCONFIG_TELCLOCK=mCONFIG_DEVPORT=yCONFIG_RAMOOPS=mCONFIG_I2C=mCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not setCONFIG_I2C_CHARDEV=mCONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not setCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not setCONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not setCONFIG_I2C_SIS630=m
# CONFIG_I2C_SIS96X is not setCONFIG_I2C_VIA=m
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_GPIO is not set CONFIG_I2C_INTEL_MID=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not setCONFIG_I2C_TAOS_EVM=mCONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not setCONFIG_I2C_DEBUG_BUS=yCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XILINX is not setCONFIG_SPI_DESIGNWARE=mCONFIG_SPI_DW_PCI=m
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not setCONFIG_SPI_TLE62X0=m
#
# PPS support
#CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#CONFIG_PPS_CLIENT_KTIMER=mCONFIG_PPS_CLIENT_LDISC=mCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not setCONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO expanders:
#CONFIG_GPIO_BASIC_MMIO=m
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not setCONFIG_GPIO_VX855=m
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not setCONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not setCONFIG_GPIO_ADP5588=m
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not setCONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=m
# CONFIG_GPIO_MCP23S08 is not setCONFIG_GPIO_MC33880=m
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not setCONFIG_W1_MASTER_DS2482=mCONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not setCONFIG_W1_SLAVE_SMEM=mCONFIG_W1_SLAVE_DS2431=mCONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2760=mCONFIG_W1_SLAVE_BQ27000=mCONFIG_POWER_SUPPLY=mCONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not setCONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2782 is not setCONFIG_BATTERY_BQ20Z75=m
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_CHARGER_ISP1704 is not setCONFIG_HWMON=mCONFIG_HWMON_VID=mCONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not setCONFIG_SENSORS_ADCXX=mCONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not setCONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not setCONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not setCONFIG_SENSORS_ADT7475=mCONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_K8TEMP is not setCONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_ASB100 is not setCONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not setCONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not setCONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_GL518SM is not setCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_GPIO_FAN=mCONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_PKGTEMP is not setCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_JC42=mCONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not setCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not setCONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not setCONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX1619 is not setCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not setCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_EMC1403=mCONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_SMSC47M1 is not setCONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not setCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_ADS7871=m
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not setCONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not setCONFIG_SENSORS_VIA_CPUTEMP=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not setCONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not setCONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not setCONFIG_SENSORS_APPLESMC=mCONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not setCONFIG_SSB_DEBUG=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_MFD_SUPPORT is not setCONFIG_MFD_CORE=mCONFIG_MFD_VX855=mCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not setCONFIG_REGULATOR_DUMMY=yCONFIG_REGULATOR_FIXED_VOLTAGE=mCONFIG_REGULATOR_VIRTUAL_CONSUMER=mCONFIG_REGULATOR_USERSPACE_CONSUMER=mCONFIG_REGULATOR_BQ24022=m
# CONFIG_REGULATOR_MAX1586 is not setCONFIG_REGULATOR_MAX8649=m
# CONFIG_REGULATOR_MAX8660 is not setCONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_LP3971 is not setCONFIG_REGULATOR_LP3972=mCONFIG_REGULATOR_TPS65023=mCONFIG_REGULATOR_TPS6507X=mCONFIG_REGULATOR_ISL6271A=mCONFIG_REGULATOR_AD5398=mCONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
# CONFIG_DVB_CORE is not setCONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_IR_CORE is not set
# CONFIG_MEDIA_ATTACH is not setCONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not setCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_MC44S803=mCONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not setCONFIG_RADIO_ADAPTERS=yCONFIG_RADIO_GEMTEK_PCI=m
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not setCONFIG_I2C_SI4713=m
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not setCONFIG_USB_MR800=mCONFIG_RADIO_TEA5764=m
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=m
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not setCONFIG_AGP_VIA=mCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=16CONFIG_DRM=m
# CONFIG_DRM_TDFX is not setCONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not setCONFIG_DRM_SIS=mCONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not setCONFIG_VGASTATE=mCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=mCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=mCONFIG_FB_CFB_COPYAREA=mCONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=mCONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not setCONFIG_FB_ARC=m
# CONFIG_FB_VGA16 is not setCONFIG_FB_N411=m
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not setCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
# CONFIG_FB_RIVA is not setCONFIG_FB_LE80578=m
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not setCONFIG_FB_ATY=mCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not setCONFIG_FB_S3=mCONFIG_FB_SAVAGE=mCONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not setCONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not setCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=mCONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_3DFX_I2C is not set
# CONFIG_FB_VOODOO1 is not setCONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not setCONFIG_FB_ARK=mCONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_VIRTUAL is not setCONFIG_XEN_FBDEV_FRONTEND=mCONFIG_FB_METRONOME=m
# CONFIG_FB_MB862XX is not setCONFIG_FB_BROADSHEET=mCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_L4F00242T03=mCONFIG_LCD_LMS283GF05=m
# CONFIG_LCD_LTV350QV is not setCONFIG_LCD_ILI9320=mCONFIG_LCD_TDO24M=mCONFIG_LCD_VGG2432A4=m
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not setCONFIG_BACKLIGHT_CLASS_DEVICE=mCONFIG_BACKLIGHT_GENERIC=mCONFIG_BACKLIGHT_PROGEAR=mCONFIG_BACKLIGHT_CARILLO_RANCH=mCONFIG_BACKLIGHT_MBP_NVIDIA=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not setCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not setCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not setCONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not setCONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not setCONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not setCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not setCONFIG_SND_DMA_SGBUF=yCONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not setCONFIG_SND_MPU401_UART=mCONFIG_SND_DRIVERS=yCONFIG_SND_DUMMY=m
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not setCONFIG_SND_MTS64=mCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_PCI is not setCONFIG_SND_SPI=yCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not setCONFIG_SOUND_PRIME=mCONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not setCONFIG_SOUND_VMIDI=m
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not setCONFIG_SOUND_PAS=m
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not setCONFIG_SOUND_YM3812=mCONFIG_SOUND_UART6850=m
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_HID_SUPPORT is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=yCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not setCONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=m
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not setCONFIG_USB_OXU210HP_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set CONFIG_USB_STORAGE_ISD200=m # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set CONFIG_USB_STORAGE_ALAUDA=m # CONFIG_USB_STORAGE_ONETOUCH is not set CONFIG_USB_STORAGE_KARMA=m # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_UAS is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not setCONFIG_USB_SERIAL=mCONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not setCONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not setCONFIG_USB_SERIAL_CP210X=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not setCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not setCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not setCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not setCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not setCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7715_PARPORT=y
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not setCONFIG_USB_SERIAL_NAVMAN=m
# CONFIG_USB_SERIAL_PL2303 is not setCONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not setCONFIG_USB_SERIAL_SPCP8X5=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SAMBA is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not setCONFIG_USB_SERIAL_CYBERJACK=m
# CONFIG_USB_SERIAL_XIRCOM is not setCONFIG_USB_SERIAL_WWAN=mCONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not setCONFIG_USB_SERIAL_OPTICON=mCONFIG_USB_SERIAL_VIVOPAY_SERIAL=mCONFIG_USB_SERIAL_ZIO=mCONFIG_USB_SERIAL_SSU100=mCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not setCONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not setCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=m
# CONFIG_USB_LED is not setCONFIG_USB_CYPRESS_CY7C63=mCONFIG_USB_CYTHERM=m
# CONFIG_USB_IDMOUSE is not setCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not setCONFIG_USB_ISIGHTFW=mCONFIG_USB_YUREX=m
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=yCONFIG_USB_GPIO_VBUS=m
# CONFIG_NOP_USB_XCEIV is not setCONFIG_UWB=mCONFIG_UWB_HWA=m
# CONFIG_UWB_WHCI is not setCONFIG_UWB_I1480U=m
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_GPIO=mCONFIG_LEDS_GPIO_PLATFORM=yCONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not setCONFIG_LEDS_REGULATOR=mCONFIG_LEDS_BD2802=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not setCONFIG_INFINIBAND=mCONFIG_INFINIBAND_USER_MAD=mCONFIG_INFINIBAND_USER_ACCESS=mCONFIG_INFINIBAND_USER_MEM=yCONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not setCONFIG_INFINIBAND_QIB=m
# CONFIG_INFINIBAND_AMSO1100 is not setCONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
# CONFIG_INFINIBAND_CXGB4 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not setCONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not setCONFIG_INFINIBAND_IPOIB_DEBUG=yCONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# CONFIG_INFINIBAND_SRP is not setCONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not setCONFIG_RTC_LIB=mCONFIG_RTC_CLASS=m
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not setCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1374=mCONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not setCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_ISL1208=m
# CONFIG_RTC_DRV_ISL12022 is not setCONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8563 is not setCONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not setCONFIG_RTC_DRV_BQ32K=mCONFIG_RTC_DRV_S35390A=m
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not setCONFIG_RTC_DRV_RX8025=m
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not setCONFIG_RTC_DRV_MAX6902=m
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not setCONFIG_RTC_DRV_DS3234=m
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not setCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not setCONFIG_RTC_DRV_M48T35=m
# CONFIG_RTC_DRV_M48T59 is not setCONFIG_RTC_DRV_MSM6242=mCONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not setCONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not setCONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
#
# Xen driver support
#CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SCRUB_PAGES is not setCONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XENFS is not setCONFIG_XEN_SYS_HYPERVISOR=yCONFIG_XEN_PLATFORM_PCI=mCONFIG_SWIOTLB_XEN=y
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not setCONFIG_DCDBAS=mCONFIG_ISCSI_IBFT_FIND=y
#
# File systems
#
# CONFIG_EXT2_FS is not setCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=m
# CONFIG_EXT4_USE_FOR_EXT23 is not setCONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not setCONFIG_EXT4_DEBUG=yCONFIG_JBD=yCONFIG_JBD2=mCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not setCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not setCONFIG_XFS_DEBUG=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=mCONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not setCONFIG_EXPORTFS=mCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not setCONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not setCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_QUOTACTL=yCONFIG_QUOTACTL_COMPAT=yCONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not setCONFIG_FSCACHE_HISTOGRAM=yCONFIG_FSCACHE_DEBUG=yCONFIG_FSCACHE_OBJECT_LIST=yCONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not setCONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not setCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not setCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_LOGFS=mCONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not setCONFIG_OMFS_FS=mCONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not setCONFIG_ROMFS_FS=mCONFIG_ROMFS_BACKED_BY_BLOCK=yCONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not setCONFIG_UFS_FS=mCONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not setCONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not setCONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=yCONFIG_LDM_DEBUG=yCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not setCONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not setCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not setCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not setCONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not setCONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not setCONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not setCONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not setCONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=mCONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set CONFIG_DETECT_HUNG_TASK=y CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1 CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=yCONFIG_BKL=yCONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set CONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set CONFIG_DEBUG_VIRTUAL=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set CONFIG_TEST_LIST_SORT=yCONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_DEBUG_CREDENTIALS=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_BOOT_PRINTK_DELAY=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_DETECTOR=y CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE is not set # CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_BUILD_DOCSRC=y CONFIG_DMA_API_DEBUG=y CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set CONFIG_IO_DELAY_NONE=y CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_CPA_DEBUG is not set CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not setCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not setCONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not setCONFIG_SECURITY_TOMOYO=y
# CONFIG_SECURITY_APPARMOR is not setCONFIG_IMA=yCONFIG_IMA_MEASURE_PCR_IDX=10CONFIG_IMA_AUDIT=yCONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not setCONFIG_DEFAULT_SECURITY="tomoyo"CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=mCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=mCONFIG_CRYPTO_PCOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_PCRYPT=mCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=mCONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not setCONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not setCONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_LRW=mCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_XTS=mCONFIG_CRYPTO_FPU=m
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=mCONFIG_CRYPTO_VMAC=m
#
# Digest
#CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not setCONFIG_CRYPTO_RMD320=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_X86_64=mCONFIG_CRYPTO_AES_NI_INTEL=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not setCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_SALSA20=mCONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not setCONFIG_CRYPTO_ZLIB=m
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not setCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=m
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not setCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=mCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZO=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_BTREE=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_NLATTR=y
Quoted 3 lines · Ingo Molnar
It crashed almost immediately after i merged Linus's
9457b24a0955into -tip, we were on yesterday'sf6614b7bb405before that - so i think the crash is both pretty generic.
Yes, it crashes with an x86 defconfig too. Appears to be caused by:
47d3904fe40d: 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
It crashes any x86 serial console bootup.
Thanks,
Ingo
Quoted 11 lines · Ingo Molnar
Quoted 3 lines · Ingo Molnar
It crashed almost immediately after i merged Linus's
9457b24a0955into -tip, we were on yesterday'sf6614b7bb405before that - so i think the crash is both pretty generic.Yes, it crashes with an x86 defconfig too. Appears to be caused by:
47d3904fe40d: 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hangIt crashes any x86 serial console bootup.
The revert below makes the system boot up fine.
Thanks,
Ingo
------------------------>
Quoted 1 line
From
a0758e8ea2a19de96d16db231be71f708980b86aMon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sat, 13 Nov 2010 16:21:58 +0100
Subject: [PATCH] Revert "8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang"
This reverts commit 47d3904fe40d62deee8cd46e79ca784e7a548acd.
Crashes any x86 serial console bootup:
Console: colour VGA+ 80x25
BUG: unable to handle kernel NULL pointer dereference at 0000000000000158 IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.37-rc1-tip-02017-gba4813e-dirty #62970 /
RIP: 0010:[<ffffffff811ebcb4>] [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 RSP: 0000:ffffffff8152fd88 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffffffff8207aa80 RCX: 0000000000002060 RDX: 0000000000000158 RSI: 0000000000000000 RDI: ffffffff8207aa80 RBP: ffffffff8152fdd8 R08: 000000000000000a R09: 000000000001c200 R10: 0000000000000025 R11: ffffffff81cec340 R12: 0000000000000013 R13: ffffffff8152fe08 R14: 0000000000000001 R15: 000000000001c200 FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000158 CR3: 000000000153f000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffffffff8152e000, task ffffffff81547020) Stack: ffffffff815567e0 ffffffff8207aa00 0000000000000286 00ffffff8207aa10 000000000000006e 000000000001c200 ffffffff8207aa80 ffffffff815762c0 000000000000006e 000000000000006e ffffffff8152fde8 ffffffff811ebf35 Call Trace: [<ffffffff811ebf35>] serial8250_set_termios+0x25/0x30 [<ffffffff811e6663>] uart_set_options+0xf3/0x170 [<ffffffff81798f55>] serial8250_console_setup+0xa8/0xaf [<ffffffff8104ac1a>] register_console+0x22a/0x390 [<ffffffff81799117>] serial8250_console_init+0x28/0x2c [<ffffffff81797a5c>] console_init+0x19/0x2a [<ffffffff81778b4d>] start_kernel+0x27d/0x407 [<ffffffff81778347>] x86_64_start_reservations+0x132/0x136 [<ffffffff81778451>] x86_64_start_kernel+0x106/0x115 Code: 98 00 00 00 41 f6 45 00 04 0f 85 a8 01 00 00 41 f6 45 08 80 75 07 83 8b 98 00 00 00 01 48 8b 83 a0 00 00 00 48 8d 90 58 01 00 00 <48> 39 90 58 01 00 00 0f 84 17 02 00 00 0f b6 93 c1 01 00 00 89 RIP [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 RSP <ffffffff8152fd88> CR2: 0000000000000158 ---[ end trace a7919e7f17c0a725 ]--- Kernel panic - not syncing: Fatal exception Pid: 0, comm: swapper Tainted: G D 2.6.37-rc1-tip-02017-gba4813e-dirty #62970 Call Trace: [<ffffffff8139148f>] panic+0x8c/0x19c [<ffffffff8104b745>] ? kmsg_dump+0x155/0x170 [<ffffffff8100f744>] oops_end+0xd4/0xf0 [<ffffffff81030a50>] no_context+0xf0/0x260 [<ffffffff81063910>] ? __kernel_text_address+0x40/0x70 [<ffffffff81030ce5>] __bad_area_nosemaphore+0x125/0x1e0 [<ffffffff81030dae>] bad_area_nosemaphore+0xe/0x10 [<ffffffff81031841>] do_page_fault+0x3d1/0x4a0 [<ffffffff8101867a>] ? save_stack_trace+0x2a/0x50 [<ffffffff8107810d>] ? __lock_acquire.clone.20+0x6fd/0xab0 [<ffffffff81395ad5>] page_fault+0x25/0x30 [<ffffffff811ebcb4>] ? serial8250_do_set_termios+0x1d4/0x430 [<ffffffff811ebc2d>] ? serial8250_do_set_termios+0x14d/0x430 [<ffffffff811ebf35>] serial8250_set_termios+0x25/0x30 [<ffffffff811e6663>] uart_set_options+0xf3/0x170 [<ffffffff81798f55>] serial8250_console_setup+0xa8/0xaf [<ffffffff8104ac1a>] register_console+0x22a/0x390 [<ffffffff81799117>] serial8250_console_init+0x28/0x2c [<ffffffff81797a5c>] console_init+0x19/0x2a [<ffffffff81778b4d>] start_kernel+0x27d/0x407 [<ffffffff81778347>] x86_64_start_reservations+0x132/0x136 [<ffffffff81778451>] x86_64_start_kernel+0x106/0x115
--- drivers/serial/8250.c | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-)
drivers/serial/8250.c +1 -4
@@ -2343,11 +2343,8 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,/* * CTS flow control flag and modem status interrupts -* Only disable MSI if no threads are waiting in -* serial_core::uart_wait_modem_status */ -if (!waitqueue_active (&up->port.state->port.delta_msr_wait)) - up->ier &= ~UART_IER_MSI ; + up->ier &= ~UART_IER_MSI ;if (!(up->bugs &UART_BUG_NOMSR ) &&UART_ENABLE_MS (&up->port, termios->c_cflag)) up->ier |=UART_IER_MSI ;
Quoted 9 lines · Ingo Molnar
Quoted 6 lines · Ingo Molnar
Quoted 3 lines · Ingo Molnar
It crashed almost immediately after i merged Linus's
9457b24a0955into -tip, we were on yesterday'sf6614b7bb405before that - so i think the crash is both pretty generic.
Quoted 7 lines
Quoted 5 lines
Yes, it crashes with an x86 defconfig too. Appears to be caused by:
47d3904fe40d: 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hangIt crashes any x86 serial console bootup.
The revert below makes the system boot up fine.
Thanks for this, Linus took it already.
greg k-h