AT91: Add support for NetusG20
PATCH 1/1 AT91: Add support for NetusG20
Add support for the NetusG20 board by Acmesystems srl. This board is based on AT91SAM9G20 SoC.
--- MAINTAINERS | 5 + board/acmesystems/netusg20/Makefile | 55 ++++++++++ board/acmesystems/netusg20/netusg20.c | 130 ++++++++++++++++++++++++ board/acmesystems/netusg20/partition.c | 39 +++++++ boards.cfg | 1 + include/configs/netusg20.h | 174 ++++++++++++++++++++++++++++++++ 6 files changed, 404 insertions(+), 0 deletions(-) create mode 100644 board/acmesystems/netusg20/Makefile create mode 100644 board/acmesystems/netusg20/netusg20.c create mode 100644 board/acmesystems/netusg20/partition.c create mode 100644 include/configs/netusg20.h
MAINTAINERS +5 -0
@@ -852,6 +852,11 @@ Alex Z lart SA1100 dnp1110 SA1110 + +Claudio Mignanti <[email protected]> + + netusg20 ARM926EJS (AT91SAM9G20 SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards:
board/acmesystems/netusg20/Makefile new file +55 -0
55 lines not on this page · raw message
board/acmesystems/netusg20/netusg20.c new file +130 -0
130 lines not on this page · raw message
board/acmesystems/netusg20/partition.c new file +39 -0
@@ -0,0 +1,39 @@ +/* +* (C) Copyright 2008 +* Ulf Samuelsson <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS ]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS ] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 ,1 } +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA ] = { + {0x00000000 ,0x000041FF ,FLAG_PROTECT_SET ,0 ,"Bootstrap" }, + {0x00004200 ,0x000083FF ,FLAG_PROTECT_CLEAR ,0 ,"Environment" }, + {0x00008400 ,0x00041FFF ,FLAG_PROTECT_SET ,0 ,"U-Boot" }, + {0x00042000 ,0x00251FFF ,FLAG_PROTECT_CLEAR ,0 ,"Kernel" }, + {0x00252000 ,0xFFFFFFFF ,FLAG_PROTECT_CLEAR ,0 ,"FS" }, +};
boards.cfg +1 -0
@@ -377,6 +377,7 @@ smdk2400 arm arm920t - samsung s3c24x0 smdk2410 arm arm920t - samsung s3c24x0 voiceblue arm arm925t omap1510inn arm arm925t - ti +netusg20 arm arm926ejs - acmesystems at91 afeb9260 arm arm926ejs - - at91 at91cap9adk arm arm926ejs - atmel at91 davinci_dvevm arm arm926ejs dvevm davinci davinci
include/configs/netusg20.h new file +174 -0
174 lines not on this page · raw message
Signature · 1 line
1.7.1
PATCH 1/1 AT91: Add support for NetusG20
Dear Claudio Mignanti,
Quoted 4 lines
Add support for the NetusG20 board by Acmesystems srl. This board is based on AT91SAM9G20 SoC.
Signed-off-by Claudio Mignanti <[email protected]>
Please run your patch with linux/scripts/checkpatch.pl, you'll get alot of errors (whitespace and style)...
Quoted 18 lines
--- MAINTAINERS | 5 + board/acmesystems/netusg20/Makefile | 55 ++++++++++ board/acmesystems/netusg20/netusg20.c | 130 ++++++++++++++++++++++++ board/acmesystems/netusg20/partition.c | 39 +++++++ boards.cfg | 1 + include/configs/netusg20.h | 174 ++++++++++++++++++++++++++++++++ 6 files changed, 404 insertions(+), 0 deletions(-) create mode 100644 board/acmesystems/netusg20/Makefile create mode 100644 board/acmesystems/netusg20/netusg20.c create mode 100644 board/acmesystems/netusg20/partition.c create mode 100644 include/configs/netusg20.hMAINTAINERS +0
-0
MAINTAINERS Alex Z · line 859
Quoted 8 lines
MAINTAINERS +5
-0@@ -852,6 +852,11 @@ Alex Z lart SA1100 dnp1110 SA1110 + +Claudio Mignanti <[email protected]> + + netusg20 ARM926EJS (AT91SAM9G20 SoC) +
Please sort that in alphabetically by Surname.
Quoted 133 lines
MAINTAINERS +0
-0------------------------------------------------------------------------- Unknown / orphaned boards:board/acmesystems/netusg20/Makefile new file +55
-0@@ -0,0 +1,55 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <[email protected]> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-$(CONFIG_NETUSG20) += netusg20.o +COBJS-y += partition.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################board/acmesystems/netusg20/netusg20.c new file +62
-0@@ -0,0 +1,130 @@ +/* +* (C) Copyright 2007-2008 +* Stelian Pop <[email protected]> +* Lead Tech Design <www.leadtechdesign.com> +* +* (C) Copyright 2010 +* Reinhard Meyer, EMK Elektronik, reinhard.meyer at emk-elektronik.de +* Claudio Mignanti <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#include <common.h> +#include <net.h> +#include <netdev.h> +#include <mmc.h> +#include <i2c.h> +#include <spi.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> + +DECLARE_GLOBAL_DATA_PTR ; + +/* ------------------------------------------------------------------------- */ +/* +* Miscellaneous platform dependent initialisations +*/ +#ifdef CONFIG_MACB +static void netus_macb_init (void ) +{ +struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ; + +/* Enable EMAC clock */ +writel (1 <<ATMEL_ID_EMAC0 , &pmc->pcer); + +/* Initialize EMAC=MACB hardware */ +at91_macb_hw_init (); +} + +int board_eth_init (bd_t *bis) +{
board/acmesystems/netusg20/netusg20.c line 72
Quoted 10 lines
board/acmesystems/netusg20/netusg20.c new file +10
-0+int rc =0 ; + rc =macb_eth_initialize (0 , (void *)ATMEL_BASE_EMAC0 ,0x00 ); + return rc; +} +#else +/* code is more readable if #directive are around the function +* and not in the middle */ +void netus_macb_init (void ) {}/* define of dummy function */ +int board_eth_init (bd_t *bis) {return 0 ;} +#endif
No else part here, if CONFIG_MACB is not set, and no other network interfaces do exist, you should also not define other network related stuff. Then board_eth_init() will not be needed.
Quoted 29 lines
board/acmesystems/netusg20/netusg20.c new file +29
-0+ +int board_early_init_f (void ) +{ +struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ; + +/* Enable clocks for all PIOs */ +writel ( (1 <<ATMEL_ID_PIOA ) | (1 <<ATMEL_ID_PIOB ) | + (1 <<ATMEL_ID_PIOC ), + &pmc->pcer); + +return 0 ; +} + +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init (bd_t *bd) +{ +struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC ; + +/* Enable MCI clock */ +writel (1 <<ATMEL_ID_MCI , &pmc->pcer); +at91_mci_hw_init (); + +/* This calls the atmel_mmc_init in gen_atmel_mci.c */ +return atmel_mci_init ((void *)ATMEL_BASE_MCI ); + +} + +/* return *cd = TRUE if card is NOT detected. */ +int board_mmc_getcd (u8 *cd,struct mmc *mmc)
board/acmesystems/netusg20/netusg20.c line 111
Quoted 10 lines
board/acmesystems/netusg20/netusg20.c new file +10
-0+{ +/* +* This board don't support card detection. +*/ + *cd =0 ; +return 0 ; +} +#else +void board_mmc_init (bd_t *bd) {} +#endif
Remove that function completely, if your board does not support card detect. A weak function should kick in in mmc.c, returning the correct value.
board/acmesystems/netusg20/netusg20.c line 121
Quoted 10 lines
board/acmesystems/netusg20/netusg20.c new file +10
-0+ +int board_init (void ) { + + gd->bd->bi_arch_number =3129 ;//MACH_TYPE_ACMENETUSFOXG20 +/* address of boot parameters */ + gd->bd->bi_boot_params =CONFIG_SYS_SDRAM_BASE +0x100 ; + +netus_macb_init (); +return 0 ; +}
if MACB is optional, #ifdef around the netus_macb_init()
Quoted 62 lines
board/acmesystems/netusg20/netusg20.c new file +9
-0+ +int dram_init (void ) +{ + gd->ram_size =get_ram_size ( + (void *)CONFIG_SYS_SDRAM_BASE , +CONFIG_SYS_SDRAM_SIZE ); +return 0 ; +} +board/acmesystems/netusg20/partition.c new file +39
-0@@ -0,0 +1,39 @@ +/* +* (C) Copyright 2008 +* Ulf Samuelsson <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS ]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS ] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 ,1 } +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA ] = { + {0x00000000 ,0x000041FF ,FLAG_PROTECT_SET ,0 ,"Bootstrap" }, + {0x00004200 ,0x000083FF ,FLAG_PROTECT_CLEAR ,0 ,"Environment" }, + {0x00008400 ,0x00041FFF ,FLAG_PROTECT_SET ,0 ,"U-Boot" }, + {0x00042000 ,0x00251FFF ,FLAG_PROTECT_CLEAR ,0 ,"Kernel" }, + {0x00252000 ,0xFFFFFFFF ,FLAG_PROTECT_CLEAR ,0 ,"FS" }, +};boards.cfg +0
-0
boards.cfg smdk2400 arm arm920t - samsung s3c24x0 · line 383
Quoted 7 lines
boards.cfg +1
-0@@ -377,6 +377,7 @@ smdk2400 arm arm920t - samsung s3c24x0 smdk2410 arm arm920t - samsung s3c24x0 voiceblue arm arm925t omap1510inn arm arm925t - ti +netusg20 arm arm926ejs - acmesystems at91 afeb9260 arm arm926ejs - - at91 at91cap9adk arm arm926ejs - atmel at91 davinci_dvevm arm arm926ejs dvevm davinci davinci
I am myself insecure about how exactly to sort in stuff here, because the list as it is is not properly sorted. Wolfgang?
Quoted 31 lines
include/configs/netusg20.h new file +25
-0@@ -0,0 +1,174 @@ +/* +* (C) Copyright 2009-2010 +* Reinhard Meyer, EMK Elektronik, reinhard.meyer at emk-elektronik.de +* Claudio Mignanti <[email protected]> +* +* Configuation settings for the NetusG20 boards. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/
include/configs/netusg20.h line 35
Quoted 10 lines
include/configs/netusg20.h new file +10
-0+ +#ifndef __CONFIG_H +#define __CONFIG_H + + +#define CONFIG_AT91SAM9G20 +#define CONFIG_NETUSG20 +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x23f00000
Just a warning here:
I know that the original load address on ?tmel systems is 1MB before end of (expected) SDRAM.
However, with relocation this is a bit dangerous if someone reserves memory or increases stack/bss sizes. You'll run into an overlap which is *BAD*. I recommend changing the initial boot loader to load images to start of SDRAM.
Quoted 10 lines
include/configs/netusg20.h new file +10
-0+ +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* 18.432 MHz */ +#define CONFIG_SYS_HZ 1000 + +/* Misc CPU related */ +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
include/configs/netusg20.h line 55
Quoted 10 lines
include/configs/netusg20.h new file +10
-0+#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +/* General purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO +#define CONFIG_AT91_GPIO_PULLUP 1/* keep pullups on peripheral pins */
"1" OK here. It is used numerically.
include/configs/netusg20.h line 64
Quoted 9 lines
include/configs/netusg20.h new file +9
-0+ +/* Serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOOTDELAY 1
"1" OK here. It is used numerically.
include/configs/netusg20.h line 72
Quoted 8 lines
include/configs/netusg20.h new file +8
-0+ +/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1
Generally, with new config files, we don't want #define SOMETHING 1, if it is only used as #ifdef SOMETHING. Please remove those "1"s all over this file.
Quoted 23 lines
include/configs/netusg20.h new file +23
-0+ +/* +* Command line configuration. +*/ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS/* related to flash support, so uneeded */ + +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_USB 1 +#define CONFIG_CMD_PING 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 + +# define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) + +/* DataFlash */ +#define CONFIG_ATMEL_DATAFLASH_SPI +#define CONFIG_HAS_DATAFLASH 1
include/configs/netusg20.h line 105
Quoted 10 lines
include/configs/netusg20.h new file +10
-0+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000/* CS1 */ +#define AT91_SPI_CLK 15000000 + +#define DATAFLASH_TCSS (0x22 << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* no NAND flash on this board*/ +#define CONFIG_SYS_NO_FLASH
That define relates to NOR and DATAFLASH (AFAIK),
but definitely not to NAND flash.
include/configs/netusg20.h line 117
Quoted 12 lines
include/configs/netusg20.h new file +12
-0+ +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_ATMEL_MCI_PORTB
I don't know your hardware, but does not generally MMC on Slot B conflict with SPI0 on at91sam9260 and friends?
Quoted 10 lines
include/configs/netusg20.h new file +10
-0+ +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1
include/configs/netusg20.h line 137
Quoted 10 lines
include/configs/netusg20.h new file +10
-0+ +#define CONFIG_SYS_LOAD_ADDR 0x22000000/* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +/* Filesystem */ +#define CONFIG_CMD_FAT 1 +#define CONFIG_CMD_EXT2 1 +#define CONFIG_CMD_MMC 1
MMC is not exactly a filesystem command...
Quoted 27 lines
include/configs/netusg20.h new file +27
-0+ +/* bootstrap + u-boot + env + linux in dataflash on CS1 */ +#define CONFIG_ENV_IS_IN_DATAFLASH 1 +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "mmc init; sleep 1; " \ + "fatload mmc 0 0x20000000 uImage; " \ + "source 0x20000000" +#define CONFIG_BOOTARGS "mem=64M console=ttyS0,115200 " \ + "root=/dev/mmcblk0p1 rootwait" + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +/* +* Size of malloc() pool
include/configs/netusg20.h line 174
Quoted 10 lines
include/configs/netusg20.h new file +9
-0+*/ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +#define CONFIG_STACKSIZE (32*1024)/* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif
Best Regards,
Reinhard