: Add hw/scsi-bsg.c backend driver
cover : Add hw/scsi-bsg.c backend driver
From: Nicholas Bellinger <[email protected]>
<Quick resend with proper subject>
Greetings QEMU SCSI / BLOCK folks,
This series adds rebased support for the hw/scsi-bsg.c backstore for scsi-bus compatible HBA emulation in QEMU-KVM on Linux hosts supporting the BSG driver against current mainline qemu-kvm.git/master code.
This patch is available from the scsi-bsg branch in the megasas/scsi friendly QEMU-KVM tree at:
http://git.kernel.org/?p=virt/kvm/nab/qemu-kvm.git;a=shortlog;h=refs/heads/megasas-upstream-v1
which includes Hannes's recent patch series posted recently against mainline v0.13.0 here:
Re: [Qemu-devel] [PATCH] Megasas HBA emulation and SCSI update v.2
http://lists.gnu.org/archive/html/qemu-devel/2010-11/msg02018.html
Note that in order for BSG I/O to function using vectored AIO a kernel patch to linux/block/bsg.c:bsg_map_hdr() is currently required running on a bit paired user/kernel enviroment. The kernel patch in question is here:
http://marc.info/?l=linux-scsi&m=127649585524598&w=2
The first three patches involve updating block code to support the BSG backstore for scsi-bsg.
The forth patch adds the minor changes to hw/scsi-bus.c and hw/scsi-disk.c in order to function with scsi-bsg.
And the fifth patch adds the main hw/scsi-bsg.c logic necessary to run the new struct SCSIDeviceInfo and for BSG AIO using struct iovec and paio_submit_len() to function. The scsi-bsg.c code has been refactored to follow the modern SCSIDeviceInfo->alloc_req_iov() and incoming struct iovec * memory for underlying SCSIRequest SGLs
So far this has been tested with v2 8708EM2 HBA Emulation on 0.13.0 on a .37-rc2 KVM host with TCM_Loop FILEIO backstores into a Debian Lenny v2.6.26 x86_64 KVM guest with XFS filesystem mounts.
Nicholas Bellinger (5):
block: Add top level BSG support
block: Add BSG qemu_open() in block/raw.c:raw_open()
block: Add paio_submit_len() non sector sized AIO
scsi: Add BSG checks into scsi-bus and scsi-disk
scsi-bsg: Add initial support for BSG based SCSIDeviceInfo
Makefile.objs | 2 +- block.c | 7 +- block.h | 1 + block/raw-posix-aio.h | 3 + block/raw-posix.c | 65 +++++- block/raw.c | 21 ++ block_int.h | 6 + hw/scsi-bsg.c | 720 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/scsi-bus.c | 3 +- hw/scsi-disk.c | 5 + posix-aio-compat.c | 29 ++ 11 files changed, 855 insertions(+), 7 deletions(-) create mode 100644 hw/scsi-bsg.c
Am 24.11.2010 09:44, schrieb Nicholas A. Bellinger:
Quoted 3 lines
From: Nicholas Bellinger <[email protected]>
<Quick resend with proper subject>
Nicholas and Hannes, can both of you please make sure to use proper email threads for your patch series? On a list with some traffic, like qemu-devel, it's really hard to keep track otherwise because patches of a single series spread all over the place (especially if you send two different versions and don't include a [PATCH v2] tag in the second one).
git-send-email should do the right thing usually.
Kevin
Quoted 16 lines · Nicholas A. Bellinger
From: Nicholas Bellinger <[email protected]>
<Quick resend with proper subject>
Greetings QEMU SCSI / BLOCK folks,
This series adds rebased support for the
hw/scsi-bsg.cbackstore for scsi-bus compatible HBA emulation in QEMU-KVM on Linux hosts supporting the BSG driver against current mainline qemu-kvm.git/master code.This patch is available from the scsi-bsg branch in the megasas/scsi friendly QEMU-KVM tree at:
http://git.kernel.org/?p=virt/kvm/nab/qemu-kvm.git;a=shortlog;h=refs/heads/megasas-upstream-v1
which includes Hannes's recent patch series posted recently against mainline v0.13.0 here:
Quoted 9 lines
Re: [Qemu-devel] [PATCH] Megasas HBA emulation and SCSI update v.2
http://lists.gnu.org/archive/html/qemu-devel/2010-11/msg02018.htmlNote that in order for BSG I/O to function using vectored AIO a kernel patch to linux/block/bsg.c:bsg_map_hdr() is currently required running on a bit paired user/kernel enviroment. The kernel patch in question is here:
OK I've looked at this patch. I have sent such a patch my self and Pete Wyckoff and other people have sent it as well. I could not find in the URL above any response to your patch. Where there any?
Thanks
Boaz
Quoted 37 lines
The first three patches involve updating block code to support the BSG backstore for scsi-bsg.
The forth patch adds the minor changes to
hw/scsi-bus.candhw/scsi-disk.cin order to function with scsi-bsg.And the fifth patch adds the main
hw/scsi-bsg.clogic necessary to run the new struct SCSIDeviceInfo and for BSG AIO using struct iovec andpaio_submit_len()to function. Thescsi-bsg.ccode has been refactored to follow the modernSCSIDeviceInfo->alloc_req_iov()and incoming struct iovec * memory for underlying SCSIRequest SGLsSo far this has been tested with v2 8708EM2 HBA Emulation on 0.13.0 on a .37-rc2 KVM host with
TCM_LoopFILEIO backstores into a Debian Lenny v2.6.26x86_64KVM guest with XFS filesystem mounts.Signed-off-by Nicholas A. Bellinger <[email protected]>Nicholas Bellinger (5):
block: Add top level BSG support
block: Add BSGqemu_open()in block/raw.c:raw_open()
block: Addpaio_submit_len()non sector sized AIO
scsi: Add BSG checks into scsi-bus and scsi-disk
scsi-bsg: Add initial support for BSG based SCSIDeviceInfoMakefile.objs | 2 +- block.c | 7 +- block.h | 1 + block/raw-posix-aio.h | 3 + block/raw-posix.c | 65 +++++- block/raw.c | 21 ++ block_int.h | 6 + hw/scsi-bsg.c | 720 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/scsi-bus.c | 3 +- hw/scsi-disk.c | 5 + posix-aio-compat.c | 29 ++ 11 files changed, 855 insertions(+), 7 deletions(-) create mode 100644 hw/scsi-bsg.c
Quoted 24 lines · Boaz Harrosh
Quoted 23 lines · Nicholas A. Bellinger
From: Nicholas Bellinger <[email protected]>
<Quick resend with proper subject>
Greetings QEMU SCSI / BLOCK folks,
This series adds rebased support for the
hw/scsi-bsg.cbackstore for scsi-bus compatible HBA emulation in QEMU-KVM on Linux hosts supporting the BSG driver against current mainline qemu-kvm.git/master code.This patch is available from the scsi-bsg branch in the megasas/scsi friendly QEMU-KVM tree at:
http://git.kernel.org/?p=virt/kvm/nab/qemu-kvm.git;a=shortlog;h=refs/heads/megasas-upstream-v1
which includes Hannes's recent patch series posted recently against mainline v0.13.0 here:
Re: [Qemu-devel] [PATCH] Megasas HBA emulation and SCSI update v.2
http://lists.gnu.org/archive/html/qemu-devel/2010-11/msg02018.htmlNote that in order for BSG I/O to function using vectored AIO a kernel patch to linux/block/bsg.c:bsg_map_hdr() is currently required running on a bit paired user/kernel enviroment. The kernel patch in question is here:
Quoted 6 lines
Quoted 2 lines
OK I've looked at this patch. I have sent such a patch my self and Pete Wyckoff and other people have sent it as well. I could not find in the URL above any response to your patch. Where there any?
Hi Boaz,
I found Tomo-san's follow here:
http://ns3.spinics.net/lists/linux-scsi/msg44266.html
Quoted 42 lines
Thanks
BoazQuoted 37 lines
The first three patches involve updating block code to support the BSG backstore for scsi-bsg.
The forth patch adds the minor changes to
hw/scsi-bus.candhw/scsi-disk.cin order to function with scsi-bsg.And the fifth patch adds the main
hw/scsi-bsg.clogic necessary to run the new struct SCSIDeviceInfo and for BSG AIO using struct iovec andpaio_submit_len()to function. Thescsi-bsg.ccode has been refactored to follow the modernSCSIDeviceInfo->alloc_req_iov()and incoming struct iovec * memory for underlying SCSIRequest SGLsSo far this has been tested with v2 8708EM2 HBA Emulation on 0.13.0 on a .37-rc2 KVM host with
TCM_LoopFILEIO backstores into a Debian Lenny v2.6.26x86_64KVM guest with XFS filesystem mounts.Signed-off-by Nicholas A. Bellinger <[email protected]>Nicholas Bellinger (5):
block: Add top level BSG support
block: Add BSGqemu_open()in block/raw.c:raw_open()
block: Addpaio_submit_len()non sector sized AIO
scsi: Add BSG checks into scsi-bus and scsi-disk
scsi-bsg: Add initial support for BSG based SCSIDeviceInfoMakefile.objs | 2 +- block.c | 7 +- block.h | 1 + block/raw-posix-aio.h | 3 + block/raw-posix.c | 65 +++++- block/raw.c | 21 ++ block_int.h | 6 + hw/scsi-bsg.c | 720 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/scsi-bus.c | 3 +- hw/scsi-disk.c | 5 + posix-aio-compat.c | 29 ++ 11 files changed, 855 insertions(+), 7 deletions(-) create mode 100644 hw/scsi-bsg.c