Skip to contentSkip to conversation

tg3: Enable phy APD for 5717 and later asic revs

PATCH In review Matt Carlson 1 participant 1 message Nov 24, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 9/10 tg3: Enable phy APD for 5717 and later asic revs

This patch enables the gphy autopowerdown feature in the phy for all new devices that support it.

---
 drivers/net/tg3.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
drivers/net/tg3.c +3 -2
index 3079e1f..afb79db 100644
@@ -12431,8 +12431,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		if (cfg2 & (1 << 18))
 			tp->phy_flags |= TG3_PHYFLG_SERDES_PREEMPHASIS;
 
-		if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
-		      GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX)) &&
+		if (((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) ||
+		    ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+		      GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX))) &&
 		    (cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN))
 			tp->phy_flags |= TG3_PHYFLG_ENABLE_APD;
 
Signature · 1 line
1.7.2.2