ppc4xx: Flush complete dcache in relocate_code()
PATCH 1/1 ppc4xx: Flush complete dcache in relocate_code()
When the cache is enabled in SDRAM we need to flush not only the global data area but also the bd_info struct in relocate_code. This patch now flushed the complete dcache (all dcache lines) via flush_dcache() instead of adding a flush_dcache_range() call for bd_info since this is faster.
--- arch/powerpc/cpu/ppc4xx/start.S | 13 +++++++------ 1 files changed, 7 insertions(+), 6 deletions(-)
arch/powerpc/cpu/ppc4xx/start.S +7 -6
@@ -1391,8 +1391,8 @@ in32r: relocate_code: #if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) /* - * We need to flush the initial global data (gd_t) before the dcache - * will be invalidated. + * We need to flush the initial global data (gd_t) and bd_info + * before the dcache will be invalidated. */ /* Save registers */
@@ -1400,10 +1400,11 @@ relocate_code: mr r10, r4 mr r11, r5 - /* Flush initial global data range */ - mr r3, r4 - addi r4, r4, GENERATED_GBL_DATA_SIZE at l - bl flush_dcache_range + /* + * Flush complete dcache, this is faster than flushing the + * ranges for global_data and bd_info instead. + */ + bl flush_dcache #if defined(CONFIG_SYS_INIT_DCACHE_CS) /*
Signature · 1 line
1.7.3.2
PATCH 1/1 ppc4xx: Flush complete dcache in relocate_code()
Quoted 4 lines · On Friday 26 November 2010 15:45:34 Stefan Roese wrote:
When the cache is enabled in SDRAM we need to flush not only the global data area but also the
bd_infostruct inrelocate_code. This patch now flushed the complete dcache (all dcache lines) viaflush_dcache()instead of adding aflush_dcache_range()call forbd_infosince this is faster.
Applied to u-boot-ppc4xx/master. Thanks.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de