Skip to contentSkip to conversation

OMAP3: Zoom1: Fix ARM relocation support

PATCH New Dirk Behme 1 participant 1 message Nov 29, 2010

lore
Share & tools
lore

Dirk Behme

author
#0 lore raw

PATCH 1/1 OMAP3: Zoom1: Fix ARM relocation support

---

Compile tested only.

 board/logicpd/zoom1/config.mk |    2 +-
 include/configs/omap3_zoom1.h |    6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)
board/logicpd/zoom1/config.mk +1 -1
Index: u-boot.git/board/logicpd/zoom1/config.mk
===================================================================
@@ -30,4 +30,4 @@
 # (mem base + reserved)
 
 # For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
include/configs/omap3_zoom1.h +6 -0
Index: u-boot.git/include/configs/omap3_zoom1.h
===================================================================
@@ -236,6 +236,12 @@
 #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
 							/* load address */
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).