Skip to contentSkip to conversation

cx25840: Prevent device probe failure due to volume control ERANGE error

PATCH New Andy Walls 1 participant 1 message Dec 5, 2010

lore
Share & tools
lore

Andy Walls

author
#0 lore raw

PATCH 1/1 cx25840: Prevent device probe failure due to volume control ERANGE error

The volume control scale in the cx25840 driver has an unusual mapping from register values to v4l2 volume control values. Enforce the mapping limits, so that the default volume control setting does not fall out of bounds to prevent the cx25840 module device probe from failing.

Cc Hans Verkuil <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
---
 drivers/media/video/cx25840/cx25840-core.c |   19 +++++++++++++++++--
 1 files changed, 17 insertions(+), 2 deletions(-)
drivers/media/video/cx25840/cx25840-core.c +17 -2
index f5a3e74..b9a2f18 100644
@@ -1991,8 +1991,23 @@ static int cx25840_probe(struct i2c_client *client,
 	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
 			V4L2_CID_HUE, -128, 127, 1, 0);
 	if (!is_cx2583x(state)) {
-		default_volume = 228 - cx25840_read(client, 0x8d4);
-		default_volume = ((default_volume / 2) + 23) << 9;
+		default_volume = cx25840_read(client, 0x8d4);
+		/*
+		 * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume
+		 * scale mapping limits to avoid -ERANGE errors when
+		 * initializing the volume control
+		 */
+		if (default_volume > 228) {
+			/* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
+			default_volume = 228;
+			cx25840_write(client, 0x8d4, 228);
+		}
+		else if (default_volume < 20) {
+			/* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
+			default_volume = 20;
+			cx25840_write(client, 0x8d4, 20);
+		}
+		default_volume = (((228 - default_volume) >> 1) + 23) << 9;
 
 		state->volume = v4l2_ctrl_new_std(&state->hdl,
 			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
Signature · 1 line
1.7.2.3