ASoC: EDB93xx machine sound driver
Subsystems (5)
PATCH 3/3 ASoC: EDB93xx machine sound driver
From: Alexander Sverdlin <[email protected]>
Added support for EDB93xx sound with CS4271 codec. Features:
- Playback, Capture
- Sample rates from 8kHz to 96kHz tested Limitations:
- Depends on ALSA auto sample format conversion
- No DAPM support
Depends on: CS4271 SoC codec support patch, EP93xx IS2 and PCM fixes patch
Signed-off-by Alexander Sverdlin <[email protected]>
--- arch/arm/mach-ep93xx/edb93xx.c | 54 +++++++++++++++ sound/soc/ep93xx/Kconfig | 9 +++ sound/soc/ep93xx/Makefile | 2 + sound/soc/ep93xx/edb93xx.c | 142 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 207 insertions(+), 0 deletions(-)
arch/arm/mach-ep93xx/edb93xx.c +54 -0
@@ -30,12 +30,21 @@#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/spi/spi.h> +#include <mach/ep93xx_spi.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <sound/cs4271.h> + +#define edb93xx_has_audio () (machine_is_edb9301() || \ + machine_is_edb9302() || \ + machine_is_edb9302a() || \ + machine_is_edb9307a() || \ + machine_is_edb9315a())static void __init edb93xx_register_flash (void ) {
@@ -93,6 +102,49 @@ static void __init edb93xx_register_i2c(void)/************************************************************************* +* EDB93xx SPI peripheral handling +*************************************************************************/ +static struct cs4271_platform_data cs4271_edb93xx_gpio = { + .gpio_nreset =EP93XX_GPIO_LINE_EGPIO1 , + .gpio_disable =EP93XX_GPIO_LINE_EGPIO6 , +}; + +static struct spi_board_info edb93xx_spi_board_info[] = { + { + .modalias ="cs4271-codec" , + .max_speed_hz =6000000 , + .bus_num =0 , + .chip_select =0 , + .mode =SPI_MODE_3 , + .platform_data = &cs4271_edb93xx_gpio, + }, +}; + +static struct ep93xx_spi_info edb93xx_spi_info = { + .num_chipselect =ARRAY_SIZE (edb93xx_spi_board_info), +}; + +static void __init edb93xx_register_spi (void ) +{ +if (edb93xx_has_audio ()) { +ep93xx_register_spi (&edb93xx_spi_info, + edb93xx_spi_board_info, +ARRAY_SIZE (edb93xx_spi_board_info)); + } +} + +/************************************************************************* +* EDB93xx I2S +*************************************************************************/ +static void __init edb93xx_register_i2s (void ) +{ +if (edb93xx_has_audio ()) { +ep93xx_register_i2s (); + } +} + + +/************************************************************************* * EDB93xx pwm *************************************************************************/ static void __init edb93xx_register_pwm (void )
@@ -117,6 +169,8 @@ static void __init edb93xx_init_machine(void)edb93xx_register_flash ();ep93xx_register_eth (&edb93xx_eth_data,1 );edb93xx_register_i2c (); +edb93xx_register_spi (); +edb93xx_register_i2s ();edb93xx_register_pwm (); }
sound/soc/ep93xx/Kconfig +9 -0
@@ -30,3 +30,12 @@ config SND_EP93XX_SOC_SIMONE help Say Y or M here if you want to add support for AC97 audio on the Simplemachines Sim.One board. + +config SND_EP93XX_SOC_EDB93XX + tristate "SoC Audio support for Cirrus Logic EDB93xx boards" + depends on SND_EP93XX_SOC && (MACH_EDB9301 || MACH_EDB9302 || MACH_EDB9302A || MACH_EDB9307A || MACH_EDB9315A) + select SND_EP93XX_SOC_I2S + select SND_SOC_CS4271 + help + Say Y or M here if you want to add support for I2S audio on the + Cirrus Logic EDB93xx boards.
sound/soc/ep93xx/Makefile +2 -0
@@ -10,6 +10,8 @@ obj-$(CONFIG_SND_EP93XX_SOC_AC97) += snd-soc-ep93xx-ac97.o # EP93XX Machine Support snd-soc-snappercl15-objs := snappercl15.o snd-soc-simone-objs := simone.o +snd-soc-edb93xx-objs := edb93xx.o obj-$(CONFIG_SND_EP93XX_SOC_SNAPPERCL15) += snd-soc-snappercl15.o obj-$(CONFIG_SND_EP93XX_SOC_SIMONE) += snd-soc-simone.o +obj-$(CONFIG_SND_EP93XX_SOC_EDB93XX) += snd-soc-edb93xx.o
sound/soc/ep93xx/edb93xx.c new file +142 -0
142 lines not on this page · raw message
Quoted 9 lines · Alexander
From: Alexander Sverdlin <[email protected]>
Added support for EDB93xx sound with CS4271 codec. Features:
- Playback, Capture
- Sample rates from 8kHz to 96kHz tested Limitations:
- Depends on ALSA auto sample format conversion
- No DAPM support
This looks good.