Skip to contentSkip to conversation

net: phy: balance disable/enable irq on change

PATCH In review Jean-Michel Hautbois 2 participants 6 messages Dec 19, 2010 – Dec 24, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/4 net: phy: balance disable/enable irq on change

When phy interface changes its status, it calls phy_change() function. This function calls the interrupt disabling functions for the driver registered, but if this driver doesn't implement it, there is no IRQ disabling. After doing the work, we call enable_irq and not the respective driver function. This fixes it, as it could lead to an unbalanced IRQ. Error code changed to EOPNOTSUPP.

---
 drivers/net/phy/phy.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/phy/phy.c +10 -2
index 7670aac..5f23e8e 100644
@@ -89,7 +89,8 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
 	phydev->interrupts = interrupts;
 	if (phydev->drv->config_intr)
 		err = phydev->drv->config_intr(phydev);
-
+	else
+		err = -EOPNOTSUPP;
 	return err;
 }
 
@@ -541,6 +542,10 @@ static int phy_enable_interrupts(struct phy_device *phydev)
 		return err;
 
 	err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+	if (err == -EOPNOTSUPP) {
+		err = 0;
+		enable_irq(phydev->irq);
+	}
 
 	return err;
 }
@@ -556,7 +561,10 @@ static int phy_disable_interrupts(struct phy_device *phydev)
 	/* Disable PHY interrupts */
 	err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 
-	if (err)
+	if (err == -EOPNOTSUPP) {
+		err = 0;
+		disable_irq(phydev->irq);
+	} else if (err != 0)
 		goto phy_err;
 
 	/* Clear the interrupt */
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 2/4 net: phy: printk issues fixed

When calling net link change, pr_info and printk where interleaved. Changed the way to print messages.

---
 drivers/net/phy/phy.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)
drivers/net/phy/phy.c +7 -7
index 5f23e8e..4ab48d7 100644
@@ -44,14 +44,14 @@
  */
 void phy_print_status(struct phy_device *phydev)
 {
-	pr_info("PHY: %s - Link is %s", dev_name(&phydev->dev),
-			phydev->link ? "Up" : "Down");
 	if (phydev->link)
-		printk(" - %d/%s", phydev->speed,
-				DUPLEX_FULL == phydev->duplex ?
-				"Full" : "Half");
-
-	printk("\n");
+		pr_info("PHY: %s - Link is up - %d/%s\n",
+				dev_name(&phydev->dev),
+				phydev->speed,
+				phydev->duplex == DUPLEX_FULL ? "Full" : "Half");
+	else
+		pr_info("PHY: %s - Link is down\n",
+				dev_name(&phydev->dev));
 }
 EXPORT_SYMBOL(phy_print_status);
 
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 3/4 net: phy: White space correction and switch/case braces

In reply to Jean-Michel Hautbois

Little corrections in the file :
- use linux and not asm for some include files
- Trailing whitespaces removed
- no lines over 80 characters
- switch and case on the same column

---
 drivers/net/phy/phy.c |  304 ++++++++++++++++++++++++------------------------
 1 files changed, 152 insertions(+), 152 deletions(-)
drivers/net/phy/phy.c +152 -152
index 4ab48d7..87a64c0 100644
@@ -33,10 +33,10 @@
 #include <linux/timer.h>
 #include <linux/workqueue.h>
 
-#include <asm/atomic.h>
-#include <asm/io.h>
+#include <linux/atomic.h>
+#include <linux/io.h>
 #include <asm/irq.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 /**
  * phy_print_status - Convenience function to print out the current phy status
@@ -48,7 +48,8 @@ void phy_print_status(struct phy_device *phydev)
 		pr_info("PHY: %s - Link is up - %d/%s\n",
 				dev_name(&phydev->dev),
 				phydev->speed,
-				phydev->duplex == DUPLEX_FULL ? "Full" : "Half");
+				phydev->duplex == DUPLEX_FULL ?
+				"Full" : "Half");
 	else
 		pr_info("PHY: %s - Link is down\n",
 				dev_name(&phydev->dev));
@@ -325,7 +326,7 @@ int phy_mii_ioctl(struct phy_device *phydev,
 
 	case SIOCSMIIREG:
 		if (mii_data->phy_id == phydev->addr) {
-			switch(mii_data->reg_num) {
+			switch (mii_data->reg_num) {
 			case MII_BMCR:
 				if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0)
 					phydev->autoneg = AUTONEG_DISABLE;
@@ -352,7 +353,6 @@ int phy_mii_ioctl(struct phy_device *phydev,
 		}
 
 		phy_write(phydev, mii_data->reg_num, val);
-		
 		if (mii_data->reg_num == MII_BMCR &&
 		    val & BMCR_RESET &&
 		    phydev->drv->config_init) {
@@ -471,7 +471,7 @@ static void phy_force_reduction(struct phy_device *phydev)
 	int idx;
 
 	idx = phy_find_setting(phydev->speed, phydev->duplex);
-	
+
 	idx++;
 
 	idx = phy_find_valid(idx, phydev->supported);
@@ -749,16 +749,16 @@ void phy_start(struct phy_device *phydev)
 	mutex_lock(&phydev->lock);
 
 	switch (phydev->state) {
-		case PHY_STARTING:
-			phydev->state = PHY_PENDING;
-			break;
-		case PHY_READY:
-			phydev->state = PHY_UP;
-			break;
-		case PHY_HALTED:
-			phydev->state = PHY_RESUMING;
-		default:
-			break;
+	case PHY_STARTING:
+		phydev->state = PHY_PENDING;
+		break;
+	case PHY_READY:
+		phydev->state = PHY_UP;
+		break;
+	case PHY_HALTED:
+		phydev->state = PHY_RESUMING;
+	default:
+		break;
 	}
 	mutex_unlock(&phydev->lock);
 }
@@ -782,172 +782,157 @@ void phy_state_machine(struct work_struct *work)
 	if (phydev->adjust_state)
 		phydev->adjust_state(phydev->attached_dev);
 
-	switch(phydev->state) {
-		case PHY_DOWN:
-		case PHY_STARTING:
-		case PHY_READY:
-		case PHY_PENDING:
-			break;
-		case PHY_UP:
-			needs_aneg = 1;
+	switch (phydev->state) {
+	case PHY_DOWN:
+	case PHY_STARTING:
+	case PHY_READY:
+	case PHY_PENDING:
+		break;
+	case PHY_UP:
+		needs_aneg = 1;
 
-			phydev->link_timeout = PHY_AN_TIMEOUT;
+		phydev->link_timeout = PHY_AN_TIMEOUT;
+
+		break;
+	case PHY_AN:
+		err = phy_read_status(phydev);
 
+		if (err < 0)
 			break;
-		case PHY_AN:
-			err = phy_read_status(phydev);
 
-			if (err < 0)
-				break;
+		/* If the link is down, give up on
+		 * negotiation for now */
+		if (!phydev->link) {
+			phydev->state = PHY_NOLINK;
+			netif_carrier_off(phydev->attached_dev);
+			phydev->adjust_link(phydev->attached_dev);
+			break;
+		}
 
-			/* If the link is down, give up on
-			 * negotiation for now */
-			if (!phydev->link) {
-				phydev->state = PHY_NOLINK;
-				netif_carrier_off(phydev->attached_dev);
-				phydev->adjust_link(phydev->attached_dev);
-				break;
-			}
+		/* Check if negotiation is done.  Break
+		 * if there's an error */
+		err = phy_aneg_done(phydev);
+		if (err < 0)
+			break;
 
-			/* Check if negotiation is done.  Break
-			 * if there's an error */
-			err = phy_aneg_done(phydev);
-			if (err < 0)
-				break;
+		/* If AN is done, we're running */
+		if (err > 0) {
+			phydev->state = PHY_RUNNING;
+			netif_carrier_on(phydev->attached_dev);
+			phydev->adjust_link(phydev->attached_dev);
 
-			/* If AN is done, we're running */
-			if (err > 0) {
-				phydev->state = PHY_RUNNING;
-				netif_carrier_on(phydev->attached_dev);
-				phydev->adjust_link(phydev->attached_dev);
+		} else if (0 == phydev->link_timeout--) {
+			int idx;
 
-			} else if (0 == phydev->link_timeout--) {
-				int idx;
+			needs_aneg = 1;
+			/* If we have the magic_aneg bit,
+			 * we try again */
+			if (phydev->drv->flags & PHY_HAS_MAGICANEG)
+				break;
 
-				needs_aneg = 1;
-				/* If we have the magic_aneg bit,
-				 * we try again */
-				if (phydev->drv->flags & PHY_HAS_MAGICANEG)
-					break;
+			/* The timer expired, and we still
+			 * don't have a setting, so we try
+			 * forcing it until we find one that
+			 * works, starting from the fastest speed,
+			 * and working our way down */
+			idx = phy_find_valid(0, phydev->supported);
 
-				/* The timer expired, and we still
-				 * don't have a setting, so we try
-				 * forcing it until we find one that
-				 * works, starting from the fastest speed,
-				 * and working our way down */
-				idx = phy_find_valid(0, phydev->supported);
+			phydev->speed = settings[idx].speed;
+			phydev->duplex = settings[idx].duplex;
 
-				phydev->speed = settings[idx].speed;
-				phydev->duplex = settings[idx].duplex;
+			phydev->autoneg = AUTONEG_DISABLE;
 
-				phydev->autoneg = AUTONEG_DISABLE;
+			pr_info("Trying %d/%s\n", phydev->speed,
+					DUPLEX_FULL ==
+					phydev->duplex ?
+					"FULL" : "HALF");
+		}
+		break;
+	case PHY_NOLINK:
+		err = phy_read_status(phydev);
 
-				pr_info("Trying %d/%s\n", phydev->speed,
-						DUPLEX_FULL ==
-						phydev->duplex ?
-						"FULL" : "HALF");
-			}
+		if (err)
 			break;
-		case PHY_NOLINK:
-			err = phy_read_status(phydev);
 
-			if (err)
-				break;
+		if (phydev->link) {
+			phydev->state = PHY_RUNNING;
+			netif_carrier_on(phydev->attached_dev);
+			phydev->adjust_link(phydev->attached_dev);
+		}
+		break;
+	case PHY_FORCING:
+		err = genphy_update_link(phydev);
 
-			if (phydev->link) {
-				phydev->state = PHY_RUNNING;
-				netif_carrier_on(phydev->attached_dev);
-				phydev->adjust_link(phydev->attached_dev);
-			}
+		if (err)
 			break;
-		case PHY_FORCING:
-			err = genphy_update_link(phydev);
-
-			if (err)
-				break;
 
-			if (phydev->link) {
-				phydev->state = PHY_RUNNING;
-				netif_carrier_on(phydev->attached_dev);
-			} else {
-				if (0 == phydev->link_timeout--) {
-					phy_force_reduction(phydev);
-					needs_aneg = 1;
-				}
+		if (phydev->link) {
+			phydev->state = PHY_RUNNING;
+			netif_carrier_on(phydev->attached_dev);
+		} else {
+			if (0 == phydev->link_timeout--) {
+				phy_force_reduction(phydev);
+				needs_aneg = 1;
 			}
+		}
 
-			phydev->adjust_link(phydev->attached_dev);
-			break;
-		case PHY_RUNNING:
-			/* Only register a CHANGE if we are
-			 * polling */
-			if (PHY_POLL == phydev->irq)
-				phydev->state = PHY_CHANGELINK;
+		phydev->adjust_link(phydev->attached_dev);
+		break;
+	case PHY_RUNNING:
+		/* Only register a CHANGE if we are
+		 * polling */
+		if (PHY_POLL == phydev->irq)
+			phydev->state = PHY_CHANGELINK;
+		break;
+	case PHY_CHANGELINK:
+		err = phy_read_status(phydev);
+
+		if (err)
 			break;
-		case PHY_CHANGELINK:
-			err = phy_read_status(phydev);
 
-			if (err)
-				break;
+		if (phydev->link) {
+			phydev->state = PHY_RUNNING;
+			netif_carrier_on(phydev->attached_dev);
+		} else {
+			phydev->state = PHY_NOLINK;
+			netif_carrier_off(phydev->attached_dev);
+		}
 
-			if (phydev->link) {
-				phydev->state = PHY_RUNNING;
-				netif_carrier_on(phydev->attached_dev);
-			} else {
-				phydev->state = PHY_NOLINK;
-				netif_carrier_off(phydev->attached_dev);
-			}
+		phydev->adjust_link(phydev->attached_dev);
 
+		if (PHY_POLL != phydev->irq)
+			err = phy_config_interrupt(phydev,
+					PHY_INTERRUPT_ENABLED);
+		break;
+	case PHY_HALTED:
+		if (phydev->link) {
+			phydev->link = 0;
+			netif_carrier_off(phydev->attached_dev);
 			phydev->adjust_link(phydev->attached_dev);
+		}
+		break;
+	case PHY_RESUMING:
 
-			if (PHY_POLL != phydev->irq)
-				err = phy_config_interrupt(phydev,
-						PHY_INTERRUPT_ENABLED);
-			break;
-		case PHY_HALTED:
-			if (phydev->link) {
-				phydev->link = 0;
-				netif_carrier_off(phydev->attached_dev);
-				phydev->adjust_link(phydev->attached_dev);
-			}
-			break;
-		case PHY_RESUMING:
+		err = phy_clear_interrupt(phydev);
 
-			err = phy_clear_interrupt(phydev);
+		if (err)
+			break;
 
-			if (err)
-				break;
+		err = phy_config_interrupt(phydev,
+				PHY_INTERRUPT_ENABLED);
 
-			err = phy_config_interrupt(phydev,
-					PHY_INTERRUPT_ENABLED);
+		if (err)
+			break;
 
-			if (err)
+		if (AUTONEG_ENABLE == phydev->autoneg) {
+			err = phy_aneg_done(phydev);
+			if (err < 0)
 				break;
 
-			if (AUTONEG_ENABLE == phydev->autoneg) {
-				err = phy_aneg_done(phydev);
-				if (err < 0)
-					break;
-
-				/* err > 0 if AN is done.
-				 * Otherwise, it's 0, and we're
-				 * still waiting for AN */
-				if (err > 0) {
-					err = phy_read_status(phydev);
-					if (err)
-						break;
-
-					if (phydev->link) {
-						phydev->state = PHY_RUNNING;
-						netif_carrier_on(phydev->attached_dev);
-					} else
-						phydev->state = PHY_NOLINK;
-					phydev->adjust_link(phydev->attached_dev);
-				} else {
-					phydev->state = PHY_AN;
-					phydev->link_timeout = PHY_AN_TIMEOUT;
-				}
-			} else {
+			/* err > 0 if AN is done.
+			 * Otherwise, it's 0, and we're
+			 * still waiting for AN */
+			if (err > 0) {
 				err = phy_read_status(phydev);
 				if (err)
 					break;
@@ -958,8 +943,23 @@ void phy_state_machine(struct work_struct *work)
 				} else
 					phydev->state = PHY_NOLINK;
 				phydev->adjust_link(phydev->attached_dev);
+			} else {
+				phydev->state = PHY_AN;
+				phydev->link_timeout = PHY_AN_TIMEOUT;
 			}
-			break;
+		} else {
+			err = phy_read_status(phydev);
+			if (err)
+				break;
+
+			if (phydev->link) {
+				phydev->state = PHY_RUNNING;
+				netif_carrier_on(phydev->attached_dev);
+			} else
+				phydev->state = PHY_NOLINK;
+			phydev->adjust_link(phydev->attached_dev);
+		}
+		break;
 	}
 
 	mutex_unlock(&phydev->lock);
Signature · 1 line
1.7.0.4
#3 lore raw

PATCH 4/4 net: phy: EXPORT_SYMBOL not following the function

In reply to Jean-Michel Hautbois

The symbol phy_stop was not following the related function.

---
 drivers/net/phy/phy.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/phy/phy.c +1 -1
index 87a64c0..ed503cd 100644
@@ -732,6 +732,7 @@ out_unlock:
 	 * will not reenable interrupts.
 	 */
 }
+EXPORT_SYMBOL(phy_stop);
 
 
 /**
@@ -762,7 +763,6 @@ void phy_start(struct phy_device *phydev)
 	}
 	mutex_unlock(&phydev->lock);
 }
-EXPORT_SYMBOL(phy_stop);
 EXPORT_SYMBOL(phy_start);
 
 /**
Signature · 1 line
1.7.0.4
maintainer
#4 lore raw
In reply to Jean-Michel Hautbois

From: Jean-Michel Hautbois <[email protected]>
Date: Sun, 19 Dec 2010 11:58:48 +0100

Quoted 8 lines

When phy interface changes its status, it calls phy_change() function. This function calls the interrupt disabling functions for the driver registered, but if this driver doesn't implement it, there is no IRQ disabling. After doing the work, we call enable_irq and not the respective driver function. This fixes it, as it could lead to an unbalanced IRQ. Error code changed to EOPNOTSUPP.

This is completely bogus.

First of all, there are 5 call sites for phy_change_interrupt() but you've only implemented the new semantics for two of those.

Therefore, if we even wanted this, we should implement the behavior in phy_change_interrupt() itself instead of duplicating the logic at each and every call site.

But we don't want this.

It's not appropriate at all. If a device lacks a way to turn interrupt off and on, using disable_irq() and enable_irq() is not necessarily correct.

If the interrupt line is shared, for example, this will break everything.

#5 lore raw

2010/12/23 David Miller <[email protected]>:

Quoted 14 lines

From: Jean-Michel Hautbois <[email protected]>
Date: Sun, 19 Dec 2010 11:58:48 +0100

Quoted 8 lines

When phy interface changes its status, it calls phy_change() function. This function calls the interrupt disabling functions for the driver registered, but if this driver doesn't implement it, there is no IRQ disabling. After doing the work, we call enable_irq and not the respective driver function. This fixes it, as it could lead to an unbalanced IRQ. Error code changed to EOPNOTSUPP.

This is completely bogus.

Quoted 8 lines

First of all, there are 5 call sites for phy_change_interrupt() but you've only implemented the new semantics for two of those.

Therefore, if we even wanted this, we should implement the behavior in phy_change_interrupt() itself instead of duplicating the logic at each and every call site.

But we don't want this.

OK, I understand that point.

Quoted 7 lines

It's not appropriate at all.  If a device lacks a way to turn interrupt off and on, using disable_irq() and enable_irq() is not necessarily correct.

If the interrupt line is shared, for example, this will break everything.

OK, well, maybe is there at least one thing we could do : in phy_change, instead of calling phy_disable_interrupts(), balanced by enable_irq, we probably should use phy_enable_interrupts().