Skip to contentSkip to conversation

^C during build broken?

DISCUSSION Gary Thomas 3 participants 4 messages Jan 6, 2011 – Jan 7, 2011

lore
Share & tools
lore
#0 lore raw

As of today's master (9b5c770cbda8cfc4c108d94bd0ff5c0af3d0b64b), if I type ^C during the build, it just keeps merrily going on...

--NOTE: package readline-native-6.1-r0: task do_configure: Started ^C
Keyboard Interrupt, closing down...

Waiting for 1 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
NOTE: package perl-native-5.8.8-r14: task do_compile: Succeeded
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install)
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install) Waiting for 2 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
1: perl-native-5.8.8-r14 do_install (pid 27401)
NOTE: package perl-native-5.8.8-r14: task do_install: Started

Huh? It _was_ waiting for 1 task to finish, but then it fired off more! I let it run for a while and it just kept going and going...

------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------

#1 lore raw
Quoted 17 lines · Gary Thomas

As of today's master (9b5c770cbda8cfc4c108d94bd0ff5c0af3d0b64b), if I type ^C during the build, it just keeps merrily going on...

--NOTE: package readline-native-6.1-r0: task do_configure: Started ^C
Keyboard Interrupt, closing down...

Waiting for 1 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
NOTE: package perl-native-5.8.8-r14: task do_compile: Succeeded
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install)
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install) Waiting for 2 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
1: perl-native-5.8.8-r14 do_install (pid 27401)
NOTE: package perl-native-5.8.8-r14: task do_install: Started

Quoted 2 lines

Huh? It _was_ waiting for 1 task to finish, but then it fired off more! I let it run for a while and it just kept going and going...

I am also seeing this.

Scott

Signature · 2 lines
Scott Garman
Embedded Linux Distro Engineer - Yocto Project
#2 lore raw
Quoted 18 lines · Scott Garman
Quoted 17 lines · Gary Thomas

As of today's master (9b5c770cbda8cfc4c108d94bd0ff5c0af3d0b64b), if I type ^C during the build, it just keeps merrily going on...

--NOTE: package readline-native-6.1-r0: task do_configure: Started ^C
Keyboard Interrupt, closing down...

Waiting for 1 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
NOTE: package perl-native-5.8.8-r14: task do_compile: Succeeded
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install)
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install) Waiting for 2 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
1: perl-native-5.8.8-r14 do_install (pid 27401)
NOTE: package perl-native-5.8.8-r14: task do_install: Started

Quoted 4 lines
Quoted 2 lines

Huh? It _was_ waiting for 1 task to finish, but then it fired off more! I let it run for a while and it just kept going and going...

I am also seeing this.

One of the patches we merged from upstream bitbake wasn't applied properly. I've fixed this in:

http://git.pokylinux.org/cgit.cgi/poky/commit/?id=0e26f53f9e2f190b302235864552956ed8f6d39b

which should fix this problem.

Cheers,

Richard

#3 lore raw
Quoted 22 lines · Richard Purdie
Quoted 21 lines · Scott Garman
Quoted 19 lines · Gary Thomas

As of today's master (9b5c770cbda8cfc4c108d94bd0ff5c0af3d0b64b), if I type ^C during the build, it just keeps merrily going on...

--NOTE: package readline-native-6.1-r0: task do_configure: Started ^C
Keyboard Interrupt, closing down...

Waiting for 1 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
NOTE: package perl-native-5.8.8-r14: task do_compile: Succeeded
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install)
NOTE: Running task 444 of 468 (ID: 110, /tmp/poky-amltd/meta/recipes-devtools/perl/perl-native_5.8.8.bb, do_install) Waiting for 2 active tasks to finish:
0: readline-native-6.1-r0 do_configure (pid 25173)
1: perl-native-5.8.8-r14 do_install (pid 27401)
NOTE: package perl-native-5.8.8-r14: task do_install: Started

Huh? It _was_ waiting for 1 task to finish, but then it fired off more! I let it run for a while and it just kept going and going...

Quoted 8 lines
Quoted 1 line

I am also seeing this.

One of the patches we merged from upstream bitbake wasn't applied properly. I've fixed this in:

http://git.pokylinux.org/cgit.cgi/poky/commit/?id=0e26f53f9e2f190b302235864552956ed8f6d39b

which should fix this problem.

Yup, working properly again. Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------