OT: determining in `Makefile.in` the Python version/path
Dear OE folks,
when compiling XBMC for the ARM architecture it hard codes Python 2.5
[1] and a patch in the OE repository changes this to Python 2.6 [2].
I tried to use python-config to determine the Python version [3].
ifeq (arm, $(ARCH))
-# Force external python2.5 for now!
-LIBS +=-lpython2.5
+# Force external Python for now!
+LIBS += $(shell python-config --libs)
endifThis fails with the following error though documented in log.do_compile.
Traceback (most recent call last):
File "/oe/build/angstrom-dev/sysroots/i686-linux/usr/bin/python-config", line 6, in <module>
from distutils import sysconfig
File "/oe/build/angstrom-dev/sysroots/i686-linux/usr/lib/python2.6/distutils/sysconfig.py", line 22, in <module>
PREFIX = os.path.normpath(sys.prefix).replace( os.getenv("BUILD_SYS"), os.getenv("HOST_SYS") )
Do you know of an easy way to fix this with just adapting Makefile.in? Or is using a separate variable as PYTHON_LIBS [4] the only option besides hard coding and patching?
ifeq (arm, $(ARCH))
# Force external Python for now!
-LIBS += $(shell python-config --libs)
+PYTHON_LIBS ?= $(shell python-config --libs)
+LIBS += $(PYTHON_LIBS)
endifThanks,
Paul
[1] https://github.com/xbmc/xbmc/#L470
[2] http://cgit.openembedded.org/cgit.cgi/openembedded/tree/recipes/xbmc/xbmc/0006-Hardcode-python2.6-for-now.patch?id=0cc02ded7bd429208ccb0e0e0aa3e43aec8a4722
[3] http://trac.xbmc.org/ticket/11041 (Please notice the updated patch where ($ is changed to $(.)
[4] http://trac.xbmc.org/ticket/11042 (Please notice the updated patch where ($ is changed to $(.)
Quoted 9 lines · Paul Menzel
I tried to use
python-configto determine the Python version [3].ifeq (arm, $(ARCH)) -# Force external python2.5 for now! -LIBS +=-lpython2.5 +# Force external Python for now! +LIBS += $(shell python-config --libs) endif
Quoted 8 lines
This fails with the following error though documented in
log.do_compile.Traceback (most recent call last):
File "/oe/build/angstrom-dev/sysroots/i686-linux/usr/bin/python-config", line 6, in <module>
from distutils import sysconfig
File "/oe/build/angstrom-dev/sysroots/i686-linux/usr/lib/python2.6/distutils/sysconfig.py", line 22, in <module>
PREFIX = os.path.normpath(sys.prefix).replace(os.getenv("BUILD_SYS"),os.getenv("HOST_SYS"))
For OE's Python, you need to set some variables in your recipe, e.g.:
EXTRA_OECONF = " \
BUILD_SYS=${BUILD_SYS} \
HOST_SYS=${HOST_SYS} \
STAGING_INCDIR=${STAGING_INCDIR} \
STAGING_LIBDIR=${STAGING_LIBDIR} \"
Regards,
Andreas
Am Sonntag, den 09.01.2011, 23:17 +0100 schrieb Andreas Oberritter:
Quoted 19 lines · Paul Menzel
Quoted 9 lines
I tried to use
python-configto determine the Python version [3].ifeq (arm, $(ARCH)) -# Force external python2.5 for now! -LIBS +=-lpython2.5 +# Force external Python for now! +LIBS += $(shell python-config --libs) endifQuoted 8 lines
This fails with the following error though documented in
log.do_compile.Traceback (most recent call last):
File "/oe/build/angstrom-dev/sysroots/i686-linux/usr/bin/python-config", line 6, in <module>
from distutils import sysconfig
File "/oe/build/angstrom-dev/sysroots/i686-linux/usr/lib/python2.6/distutils/sysconfig.py", line 22, in <module>
PREFIX = os.path.normpath(sys.prefix).replace(os.getenv("BUILD_SYS"),os.getenv("HOST_SYS"))
Quoted 8 lines
For OE's Python, you need to set some variables in your recipe, e.g.:
EXTRA_OECONF = " \ BUILD_SYS=${BUILD_SYS} \ HOST_SYS=${HOST_SYS} \ STAGING_INCDIR=${STAGING_INCDIR} \ STAGING_LIBDIR=${STAGING_LIBDIR} \"
Andreas, thank you very much. At first it did not work and I got the same error. Then I tried to put it into EXTRA_OEMAKE, since the error was during task compile. That did not work either and I got the same error again.
With a manual test recipe (attached, git am --scissors) manually running
python-config --libs
worked, so I think the problem is, that the environment variables are not passed to the shell(?) opened by $(shell …).
Searching for 'BUILD_SYS=${BUILD_SYS}' through the repository I found that sometimes those variables are exported and tried the following
do_configure_prepend() {
export BUILD_SYS=${BUILD_SYS}
export HOST_SYS=${HOST_SYS}
export STAGING_INCDIR=${STAGING_INCDIR}
export STAGING_LIBDIR=${STAGING_LIBDIR}
}
[…]
do_compile_prepend() {
export BUILD_SYS=${BUILD_SYS}
export HOST_SYS=${HOST_SYS}
export STAGING_INCDIR=${STAGING_INCDIR}
export STAGING_LIBDIR=${STAGING_LIBDIR}
}which seems to work. Is that the right explanation and is there an easier way to do this?
Thanks,
Paul
8<-------------------------------------------------------------------->8 From dbf2af72601e5998af0d3cc0f0dc4abcc5d4fa6e Mon Sep 17 00:00:00 2001
From: Paul Menzel <[email protected]>
Date: Mon, 10 Jan 2011 11:00:45 +0100
Subject: [PATCH] test-python-config: add test program for python-config
http://lists.linuxtogo.org/pipermail/openembedded-devel/2011-January/028563.html
--- recipes/helloworld/test-python-config_1.0.0.bb | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) create mode 100644 recipes/helloworld/test-python-config_1.0.0.bb
recipes/helloworld/test-python-config_1.0.0.bb new file +18 -0
@@ -0,0 +1,18 @@ +DESCRIPTION = "run `python-config --libs`" +LICENSE = "GPLv3" +PR = "r0" +DEPENDS = "python" + +S = "${WORKDIR}/${P}" + +do_fetch () { + mkdir -p ${WORKDIR}/${P} + cd ${WORKDIR}/${P} +} + +do_compile () { + BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} STAGING_INCDIR=${STAGING_INCDIR} STAGING_LIBDIR=${STAGING_LIBDIR} python-config --libs +} + +do_install () { +}
Signature · 1 line
1.7.2.3