Skip to contentSkip to conversation

Docs: Updated the Yocto Project Quickstart

PATCH Applied Scott Rifenbark 2 participants 4 messages Jan 7, 2011 – Jan 10, 2011

lore
Share & tools
lore
#0 lore raw

cover Docs: Updated the Yocto Project Quickstart

small changes to the Yocto Project Quickstart.

Pull URL: git://git.pokylinux.org/poky-contrib.git
Branch: srifenbark/docs
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=srifenbark/docs

Thanks,
Scott Rifenbark <[email protected]>
---

Scott Rifenbark (2):
documentation/bsp-guide/bsp.xml: Commented out three sections. documentation/yocto-project-qs/yocto-project-qs.xml: Corrections to
Using Pre-Built Binaries and QEMU section.

 documentation/bsp-guide/bsp.xml                    |    2 +-
 .../yocto-project-qs/yocto-project-qs.xml          |   15 +++++++++++----
 2 files changed, 12 insertions(+), 5 deletions(-)
#1 lore raw

PATCH 1/2 documentation/bsp-guide/bsp.xml: Commented out three sections.

There are some sections now that don't correspond one-to-one with the standard file structure presented in section 1.1. So I am commenting them out for now. Since I am still in the process of iterating on this manual I don't want to just delete the information.

---
 documentation/bsp-guide/bsp.xml |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
documentation/bsp-guide/bsp.xml +1 -1
index f5fd217..08821aa 100644
@@ -416,7 +416,7 @@ SRC_URI += "file://defconfig \
             </para></note>
             </section>
 
-<!--            <section id='bsp-filelayout-packages'>
+<!--        <section id='bsp-filelayout-packages'>
             <title>Other Software (meta-&lt;bsp_name&gt;/recipes-kernel/*)</title>
 
             <para>
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 2/2 documentation/yocto-project-qs/yocto-project-qs.xml: Corrections to Using Pre-Built Binaries and QEMU section.

In reply to Scott Rifenbark

Made several small changes:

- Added a period to three-bullet list for consistency
- grammar fix to sentence
- Added clarification for getting stuff from qemu URL
- Fixed the forms for the image and the file system image

---
 .../yocto-project-qs/yocto-project-qs.xml          |   15 +++++++++++----
 1 files changed, 11 insertions(+), 4 deletions(-)
documentation/yocto-project-qs/yocto-project-qs.xml +11 -4
index 1c45cde..ca2794b 100644
@@ -302,7 +302,7 @@
          <itemizedlist>
              <listitem>
                  <para>
-                     Install the standalone Yocto toolchain tarball
+                     Install the standalone Yocto toolchain tarball.
                  </para>
              </listitem>
              <listitem>
@@ -319,7 +319,7 @@
          </itemizedlist>
 
          <para>
-             You can download the pre-built toolchain which includes the poky-qemu script and support files from <ulink url='http://yoctoproject.org/downloads/yocto-0.9/toolchain/'></ulink>.  These are available for i586 (32-bit) and x86_64 (64 bit) host machines, targeting each of the 5 supported target architectures. The tarballs are self contained and install into /opt/poky.
+             You can download the pre-built toolchain, which includes the poky-qemu script and support files, from <ulink url='http://yoctoproject.org/downloads/yocto-0.9/toolchain/'></ulink>.  These are available for i586 (32-bit) and x86_64 (64 bit) host machines, targeting each of the five supported target architectures. The tarballs are self contained and install into <filename>/opt/poky</filename>.
              Use these commands to install the toolchain tarball (taking the 64 bit host, 32 bit i586 target as an example):
          </para>
 
@@ -331,13 +331,20 @@
          </para>
 
          <para>
-             You can download the pre-built Linux kernel and the file image system from <ulink url='http://yoctoproject.org/downloads/yocto-0.9/'></ulink>.  
+             You can download the pre-built Linux kernel and the file image system suitable for 
+             running in the emulator QEMU from 
+             <ulink url='http://yoctoproject.org/downloads/yocto-0.9/qemu'></ulink>.
+             Be sure to use the kernel and file image system that matches the architecture you want 
+             to simulate.
+         </para>
+       
+         <para>  
              The kernel and file image system have the following forms, respectively:
          </para>
 
           <literallayout class='monospaced'>
      *zImage*qemu*.bin
-     poky-image-*-qemu*.ext2.bz2
+     yocto-image-*-qemu*.ext3.bz2
           </literallayout>
 
          <para>
Signature · 1 line
1.7.0.4