Skip to contentSkip to conversation

QemuARM Boot Failure

DISCUSSION Saul Wold 4 participants 8 messages Jan 17, 2011

lore
Share & tools
lore

Saul Wold

author
#0 lore raw

Bruce,

Did you test the latest systemtap update on ARM? I am just curious based on the current failure that we are having with qemuarm. If so, against what revision of master? This might help us narrow down the issue.

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year. I am not sure about the userspace changes yet, need to review them more deeply.

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Thanks
Sau!

#1 lore raw

Hi Saul,

I tested the recent build images from the autobuilder.
The build images from both 2011011-1 and 20110112-1 can not boot. With the build image from 20110110-1, it can boot.

Quoted 18 lines · Saul Wold

Bruce,

Did you test the latest systemtap update on ARM? I am just curious based on the current failure that we are having with qemuarm. If so, against what revision of master? This might help us narrow down the issue.

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year. I am not sure about the userspace changes yet, need to review them more deeply.

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Thanks
Sau!

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

#2 lore raw
In reply to Saul Wold
Quoted 6 lines · Saul Wold

Bruce,

Did you test the latest systemtap update on ARM?  I am just curious based on the current failure that we are having with qemuarm.  If so, against what revision of master? This might help us narrow down the issue.

The systemtap updates are generic, just configuration items that wouldn't trigger a boot error .. at least not in any normal stretch of the imagination.

I booted all arches when I updated to the full 2.6.37 release, which was about a week ago. Nothing of significance has changed since then.

I'll do some builds and booting today and see what's up.

Bruce

Quoted 19 lines

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year.  I am not sure about the userspace changes yet, need to review them more deeply.

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Thanks
  Sau!

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"
#3 lore raw
Quoted 8 lines · Bruce Ashfield
Quoted 6 lines · Saul Wold

Bruce,

Did you test the latest systemtap update on ARM?  I am just curious based on the current failure that we are having with qemuarm.  If so, against what revision of master? This might help us narrow down the issue.

Quoted 7 lines

The systemtap updates are generic, just configuration items that wouldn't trigger a boot error .. at least not in any normal stretch of the imagination.

I booted all arches when I updated to the full 2.6.37 release, which was about a week ago. Nothing of significance has changed since then.

I'll do some builds and booting today and see what's up.

An update.

I've bisected to my last known good boot .. and it fails the same way as the latest. I'll continue looking at the kernel, but this doesn't look to be isolated to any kernel change in particular.

Bruce

Quoted 29 lines

Bruce

Quoted 11 lines

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year.  I am not sure about the userspace changes yet, need to review them more deeply.

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Quoted 8 lines

Thanks
  Sau!

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

--
"Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end"

Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"
#4 lore raw
In reply to Saul Wold
Quoted 6 lines · Saul Wold

Bruce,

Did you test the latest systemtap update on ARM? I am just curious based on the current failure that we are having with qemuarm. If so, against what revision of master? This might help us narrow down the issue.

Just one thing - at this point, systemtap doesn't need to be tested on arm, since it didn't work and therefore isn't one of the compatible machines.

That doesn't explain why qemuarm doesn't boot for - anything systemtap-related would be orthogonal. I was able to boot it though, only to find out that systemtap doesn't work on it...

Tom

Quoted 17 lines

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year. I am not sure about the userspace changes yet, need to review them more deeply.

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Thanks
Sau!

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

#5 lore raw
Quoted 8 lines · Tom Zanussi
Quoted 6 lines · Saul Wold

Bruce,

Did you test the latest systemtap update on ARM? I am just curious based on the current failure that we are having with qemuarm. If so, against what revision of master? This might help us narrow down the issue.

Quoted 8 lines

Just one thing - at this point, systemtap doesn't need to be tested on arm, since it didn't work and therefore isn't one of the compatible machines.

That doesn't explain why qemuarm doesn't boot for - anything systemtap-related would be orthogonal. I was able to boot it though, only to find out that systemtap doesn't work on it...

Actually, that's not true, got confused with something else - I never got to the point of booting it, since it was a compile failure...

Tom

Quoted 25 lines

Tom

Quoted 10 lines

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year. I am not sure about the userspace changes yet, need to review them more deeply.

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Quoted 7 lines

Thanks
Sau!

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

#6 lore raw
In reply to Saul Wold
Quoted 8 lines · Saul Wold

Bruce,

Did you test the latest systemtap update on ARM?  I am just curious based on the current failure that we are having with qemuarm.  If so, against what revision of master? This might help us narrow down the issue.

Quoted 5 lines

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year.  I am not sure about the userspace changes yet, need to review them more deeply.

Problem solved, there were some configuration values being dropped. I'm putting together a fix now.

root@qemuarm:~# uname -a
Linux qemuarm 2.6.37-yocto-standard+ #2 PREEMPT Mon Jan 17 12:35:56
EST 2011 armv5tejl GNU/Linux

Cheers,

Bruce

Quoted 12 lines

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Thanks
  Sau!

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"
#7 lore raw
Quoted 15 lines · Bruce Ashfield
Quoted 8 lines · Saul Wold

Bruce,

Did you test the latest systemtap update on ARM?  I am just curious based on the current failure that we are having with qemuarm.  If so, against what revision of master? This might help us narrow down the issue.

Quoted 5 lines

I tried both the systemtap version and the older version and both failed. The last known good qemuarm was 2 weeks ago, there have been a number of kernel updates in that time along with a loads of userspace changes, but no qemu updates since the first of the year.  I am not sure about the userspace changes yet, need to review them more deeply.

Quoted 6 lines

Problem solved, there were some configuration values being dropped. I'm putting together a fix now.

root@qemuarm:~# uname -a
Linux qemuarm 2.6.37-yocto-standard+ #2 PREEMPT Mon Jan 17 12:35:56
EST 2011 armv5tejl GNU/Linux

pull request just sent.

Cheers,

Bruce

Quoted 25 lines

Cheers,

Bruce

Quoted 4 lines

I will be tied up tomorrow, but will try bisecting tomorrow evening if there is no update before then.

Quoted 8 lines

Thanks
  Sau!

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

--
"Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end"

Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"